Substrining different lines

hi i was wondering how can you substring different lines from say a text file i want to take out different characters from different lines on the file

Since strings are immutable, you should probably use a StringBuilder to construct your end result. Basically you have to read and then just not write the characters you don't want.
Without specifics on what you are talking about then, that is about as good as I can say.

Similar Messages

Output the requested delivery date for each different line item

Hello Experts
I have program called ZFSFSF(following), in the output Its showing multiple requested delvery dates per line item.
But We need to show the requested delivery date for each different line item.
Any code is highly appreciated. I wud appreacite if you cud bold the added code.
Thanks
SP
TYPE-POOLS: slis.
TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1, bkpf, bsad, bkpf_bsad,
knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
DATA: BEGIN OF i_list OCCURS 0,
vbeln LIKE vbak-vbeln,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
erdat LIKE vbap-erdat,
mvgr1 LIKE mvke-mvgr1,
wadat_ist LIKE likp-wadat_ist,
days TYPE i,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
kwmeng LIKE vbap-kwmeng," CH01+
lfimg LIKE lips-lfimg," CH01+
pstyv LIKE vbap-pstyv," CH01+
obd LIKE lips-vbeln," CH01+
obd_pos LIKE lips-posnr," CH01+
soldto LIKE vbaK-kunnr," JR+
shipto LIKE vbpa-kunnr," JR+
edatu like vbep-edatu," PR+
END OF i_list.
DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
*ALV Output Header
DATA: gt_list_top_of_page TYPE slis_t_listheader,
prognm LIKE sy-repid,
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gt_events TYPE slis_t_event,
is_layout TYPE slis_layout_alv,
is_variant LIKE disvariant,
it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: g_repid LIKE sy-repid,
g_count LIKE sy-tabix.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-t01.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t10.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t11.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t12.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK block0.
*/ Selection and Input Parameters
SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
s_matnr FOR vbap-matnr," obligatory,
s_mvgr1 FOR mvke-mvgr1,
s_erdat FOR vbap-erdat OBLIGATORY,
s_werks FOR vbap-werks,
s_lgort FOR vbap-lgort,
s_edatu FOR vbep-edatu.
PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
SELECTION-SCREEN SKIP 2.
+EC1
Addition +EC1
+EC1
PARAMETERS: p_vari LIKE disvariant-variant.
+EC1
End Addition +EC1
+EC1
SELECTION-SCREEN END OF BLOCK blocko.
+EC1
Addition +EC1
+EC1
DATA: g_save(1) TYPE c,
g_default(1) TYPE c,
g_exit(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant.
+EC1
End Addition +EC1
+EC1
Initialization fieldcatalog
INITIALIZATION.
PERFORM clear_tables.
g_repid = sy-repid.
PERFORM fieldcat_init USING gt_fieldcat[].
+EC1
Addition +EC1
+EC1
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN.
PERFORM auth_check. "+ESC
PERFORM pai_of_selection_screen.
+EC1
End Addition +EC1
+EC1
START-OF-SELECTION.
PERFORM get_data.
PERFORM alv.
END-OF-SELECTION.
FORM get_data *
FORM get_data.
*CH01 - Added kwmeng(order qty) to selection, excluded rejects
*JR -added soldto and shipto code
SELECT avbeln aposnr amatnr aerdat awerks algort
akwmeng apstyv bkunnr cedatu
CH01+
INTO
(i_list-vbeln, i_list-posnr, i_list-matnr, i_list-erdat, i_list-werks,
i_list-lgort,
i_list-kwmeng , i_list-pstyv, i_list-soldto,i_list-edatu)
CH01+
FROM vbap AS a INNER JOIN vbak AS b ON avbeln = bvbeln
INNER JOIN vbep AS c ON avbeln = cvbeln
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
APPEND i_list.
ENDSELECT.
COMMIT WORK AND WAIT.
LOOP AT i_list.
SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
WHERE matnr = i_list-matnr.
MODIFY i_list.
CLEAR: i_list.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-mvgr1 IN s_mvgr1.
CONTINUE.
ELSE.
DELETE i_list.
COMMIT WORK AND WAIT.
ENDIF.
ENDLOOP.
CH01 - commented these lines out and redid logic below
LOOP AT i_list.
select single vbeln into lips-vbeln from lips
where vgbel = i_list-vbeln
and vgpos = i_list-posnr.
select single wadat_ist into i_list-wadat_ist from likp
where vbeln = lips-vbeln.
SELECT b~wadat_ist INTO i_list-wadat_ist
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr.
MODIFY i_list.
CLEAR: i_list, lips-vbeln.
ENDSELECT.
ENDLOOP.
CH01 - Changed to select multiple delivery lines & del qty
summing the total deliveries per OBD# and date
LOOP AT i_list.
SELECT avbeln sum( alfimg ) b~wadat_ist
INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr
AND a~pstyv = i_list-pstyv
group by avbeln bwadat_ist.
i_list2 = i_list.
APPEND i_list2.
ENDSELECT.
IF sy-subrc <> 0.
i_list2 = i_list.
APPEND i_list2.
ENDIF.
ENDLOOP.
i_list[] = i_list2[].
*End CH01
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-wadat_ist IS INITIAL.
CONTINUE.
ELSE.
i_list-days = i_list-wadat_ist - i_list-erdat.
ENDIF.
MODIFY i_list.
CLEAR: i_list.
COMMIT WORK AND WAIT.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-vbeln IS INITIAL.
DELETE i_list.
ENDIF.
ENDLOOP.
COMMIT WORK AND WAIT.
*JR
LOOP AT i_list.
SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
WHERE vbeln = i_list-vbeln
AND parvw = 'WE'.
MODIFY i_list.
ENDLOOP.
*END JR
gt_outtab[] = i_list[].
COMMIT WORK AND WAIT.
ENDFORM.
FORM alv *
FORM alv.
PERFORM e03_eventtab_build USING gt_events[]. "+EC1
PERFORM e04_comment_build USING gt_list_top_of_page[]. "+EC1
prognm = sy-repid. "+EC1
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_user_command = 'USER_COMMAND'
i_callback_program = g_repid
it_fieldcat = gt_fieldcat[]
it_events = gt_events[] "+ESC
it_sort = it_sort[]
+EC1
Addition +EC1
+EC1
is_variant = g_variant
i_save = g_save
+EC1
End Addition +EC1
+EC1
TABLES
t_outtab = gt_outtab.
COMMIT WORK AND WAIT.
ENDFORM.
FORM fieldcat_init *
--> I_FIELDCAT *
FORM fieldcat_init
USING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA: pos TYPE i VALUE 1.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'VBELN'.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'POSNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MVGR1'.
ls_fieldcat-ref_tabname = 'MVKE'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LGORT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'ERDAT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WADAT_IST'.
ls_fieldcat-ref_tabname = 'LIKP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'DAYS'.
ls_fieldcat-ref_fieldname = 'DAYS'.
ls_fieldcat-seltext_s = '# Of Days'.
ls_fieldcat-seltext_m = '# Of Days'.
ls_fieldcat-seltext_l = '# Of Days'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*Begin CH01
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'KWMENG'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LFIMG'.
ls_fieldcat-ref_tabname = 'LIPS'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD'.
ls_fieldcat-seltext_s = 'OBD'.
ls_fieldcat-seltext_m = 'Outbound Del'.
ls_fieldcat-seltext_l = 'Outbound Delivery'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD_POS'.
ls_fieldcat-seltext_s = 'OBD Ln'.
ls_fieldcat-seltext_m = 'Outbound Del Ln'.
ls_fieldcat-seltext_l = 'Outbound Del Line'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*End CH01
*JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SOLDTO'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-seltext_m = 'Sold To'.
ls_fieldcat-seltext_l = 'Sold To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SHIPTO'.
ls_fieldcat-ref_tabname = 'VBPA'.
ls_fieldcat-seltext_m = 'Ship To'.
ls_fieldcat-seltext_l = 'Ship To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*END JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'EDATU'.
ls_fieldcat-ref_tabname = 'VBEP'.
ls_fieldcat-seltext_m = 'Requested Delivery date'.
ls_fieldcat-seltext_l = 'Requested Delivery date'.
ls_fieldcat-outputlen = 20.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*FOR ALV SORT & SUBTOTAL
CLEAR it_sort.
it_sort-spos = '0'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'POSNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '2'.
it_sort-fieldname = 'MATNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '3'.
it_sort-fieldname = 'MVGR1'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '4'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '5'.
it_sort-fieldname = 'WADAT_IST'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-down = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '6'.
it_sort-fieldname = 'PERNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '7'.
it_sort-fieldname = 'VORNA'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '8'.
it_sort-fieldname = 'NACHN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '9'.
it_sort-fieldname = 'VKGRP'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '10'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '11'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '12'.
it_sort-fieldname = 'BEZEI'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
clear it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'BELNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
append it_sort.
ENDFORM.
+EC1
Addition +EC1
+EC1
*& Form VARIANT_INIT
text
--> p1 text
<-- p2 text
FORM variant_init.
CLEAR g_variant.
g_variant-report = g_repid.
ENDFORM. " VARIANT_INIT
FORM f4_for_variant *
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM.
*& Form PAI_OF_SELECTION_SCREEN
text
FORM pai_of_selection_screen.
IF NOT p_vari IS INITIAL.
MOVE g_variant TO gx_variant.
MOVE p_vari TO gx_variant-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant.
g_variant = gx_variant.
ELSE.
PERFORM variant_init.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
+EC1
End Addition +EC1
+EC1
FORM e03_eventtab_build *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM e04_comment_build *
--> E04_LT_TOP_OF_PAGE *
FORM e04_comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
*Report Title
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-007.
APPEND ls_line TO e04_lt_top_of_page.
**Doc Type Desc.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-008.
ls_line-info = p_matnr.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-009.
ls_line-info = p_werks.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-010.
ls_line-info = p_stlan.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-011.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-012.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
ENDFORM.
FORM top_of_page *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_list_top_of_page.
ENDFORM.
FORM auth_check *
FORM auth_check.
AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
ID 'VKORG' FIELD p_vkorg.
IF sy-subrc NE 0.
MESSAGE e054 WITH p_vkorg.
ENDIF.
ENDFORM. " auth_check
*& Form USER_COMMAND
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
PERFORM display_so_order USING r_ucomm
rs_selfield.
ENDCASE.
ENDFORM.
*& Form display_sales_order
text
-->P_R_UCOMM text
-->P_RS_SELFIELD text
FORM display_so_order USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE rs_selfield-sel_tab_field.
WHEN '1-VBELN'.
SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
WHEN '1-MATNR'.
SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
WHEN '1-OBD'.
SET PARAMETER ID 'VL' FIELD rs_selfield-value.
CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE i000(z1) WITH 'Please Click on the Valid Selection'.
EXIT.
ENDCASE.
ENDFORM. " display_sales_order
FORM EDit_table *

> TYPE-POOLS: slis.
>
> TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1,
> bkpf, bsad, bkpf_bsad,
> knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
>
> DATA: BEGIN OF i_list OCCURS 0,
> vbeln LIKE vbak-vbeln,
> posnr LIKE vbap-posnr,
 etenr like vbep-etenr,
> matnr LIKE vbap-matnr,
> erdat LIKE vbap-erdat,
> mvgr1 LIKE mvke-mvgr1,
> wadat_ist LIKE likp-wadat_ist,
> days TYPE i,
> werks LIKE vbap-werks,
> lgort LIKE vbap-lgort,
> kwmeng LIKE vbap-kwmeng," CH01+
> lfimg LIKE lips-lfimg," CH01+
> pstyv LIKE vbap-pstyv," CH01+
> obd LIKE lips-vbeln," CH01+
> obd_pos LIKE lips-posnr," CH01+
> soldto LIKE vbaK-kunnr," JR+
> shipto LIKE vbpa-kunnr," JR+
> edatu like vbep-edatu," PR+
> END OF i_list.
>
> DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
> i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
>
> DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
>
>
> *ALV Output Header
> DATA: gt_list_top_of_page TYPE slis_t_listheader,
> prognm LIKE sy-repid,
> gc_formname_top_of_page TYPE slis_formname VALUE
> 'TOP_OF_PAGE',
> gt_events TYPE slis_t_event,
> is_layout TYPE slis_layout_alv,
> is_variant LIKE disvariant,
> it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
>
> DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
> DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER
> LINE.
>
> DATA: g_repid LIKE sy-repid,
> g_count LIKE sy-tabix.
>
> SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME
> TITLE text-t01.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t10.
>
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t11.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t12.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN END OF BLOCK block0.
>
> */ Selection and Input Parameters
> SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME
> TITLE text-001.
>
>
>
> SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
> s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
> s_matnr FOR vbap-matnr," obligatory,
> s_mvgr1 FOR mvke-mvgr1,
> s_erdat FOR vbap-erdat OBLIGATORY,
> s_werks FOR vbap-werks,
> s_lgort FOR vbap-lgort,
> s_edatu FOR vbep-edatu.
>
> PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
>
>
>
> SELECTION-SCREEN SKIP 2.
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> PARAMETERS: p_vari LIKE disvariant-variant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> SELECTION-SCREEN END OF BLOCK blocko.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> DATA: g_save(1) TYPE c,
> * g_default(1) TYPE c,
> g_exit(1) TYPE c,
> gx_variant LIKE disvariant,
> g_variant LIKE disvariant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
> * Initialization fieldcatalog
> INITIALIZATION.
>
> * PERFORM clear_tables.
>
> g_repid = sy-repid.
> PERFORM fieldcat_init USING gt_fieldcat[].
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> g_save = 'A'.
> PERFORM variant_init.
> * Get default variant
> gx_variant = g_variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 0.
> p_vari = gx_variant-variant.
> ENDIF.
>
> AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
> PERFORM f4_for_variant.
>
> AT SELECTION-SCREEN.
> PERFORM auth_check. "+ESC
> PERFORM pai_of_selection_screen.
>
>
>
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> START-OF-SELECTION.
>
> PERFORM get_data.
>
> PERFORM alv.
>
> END-OF-SELECTION.
>
> *----
> -
> * FORM get_data *
> *----
> -
> * ........ *
> *----
> -
> FORM get_data.
> *CH01 - Added kwmeng(order qty) to selection,
> excluded rejects
> *JR -added soldto and shipto code
SELECT a~vbeln a~posnr a~matnr a~erdat a~werks a~lgort
a~kwmeng a~pstyv b~kunnr c~edatu
CH01+
INTO corresponding fields of table i_list
FROM vbap AS a INNER JOIN vbak AS b ON a~vbeln = b~vbeln
INNER JOIN vbep AS c ON a~vbeln = c~vbeln
and a~posnr = c~posnr
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
> WHERE matnr = i_list-matnr.
> MODIFY i_list.
> CLEAR: i_list.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-mvgr1 IN s_mvgr1.
> CONTINUE.
> ELSE.
> DELETE i_list.
> COMMIT WORK AND WAIT.
> ENDIF.
> ENDLOOP.
> * CH01 - commented these lines out and redid logic
> below
> * LOOP AT i_list.
> ** select single vbeln into lips-vbeln from lips
> ** where vgbel = i_list-vbeln
> ** and vgpos = i_list-posnr.
> **
> ** select single wadat_ist into i_list-wadat_ist from
> likp
> ** where vbeln = lips-vbeln.
> *
> * SELECT b~wadat_ist INTO i_list-wadat_ist
> * FROM lips AS a INNER JOIN
> * likp AS b ON a~vbeln = b~vbeln WHERE a~vgbel =
> i_list-vbeln
> * AND a~vgpos = i_list-posnr.
> * MODIFY i_list.
> * CLEAR: i_list, lips-vbeln.
> * ENDSELECT.
> * ENDLOOP.
>
> * CH01 - Changed to select multiple delivery lines &
> del qty
> * summing the total deliveries per OBD# and date
> LOOP AT i_list.
> SELECT avbeln sum( alfimg ) b~wadat_ist
> INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
> FROM lips AS a INNER JOIN
> likp AS b ON avbeln = bvbeln WHERE a~vgbel =
> i_list-vbeln
> AND a~vgpos = i_list-posnr
> AND a~pstyv = i_list-pstyv
> group by avbeln bwadat_ist.
> i_list2 = i_list.
> APPEND i_list2.
> ENDSELECT.
> IF sy-subrc <> 0.
> i_list2 = i_list.
> APPEND i_list2.
> ENDIF.
> ENDLOOP.
> i_list[] = i_list2[].
> *End CH01
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-wadat_ist IS INITIAL.
> CONTINUE.
> ELSE.
> i_list-days = i_list-wadat_ist - i_list-erdat.
> ENDIF.
> MODIFY i_list.
> CLEAR: i_list.
> COMMIT WORK AND WAIT.
> ENDLOOP.
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-vbeln IS INITIAL.
> DELETE i_list.
> ENDIF.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> *JR
> LOOP AT i_list.
> SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
> WHERE vbeln = i_list-vbeln
> AND parvw = 'WE'.
> MODIFY i_list.
> ENDLOOP.
> *END JR
>
> gt_outtab[] = i_list[].
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
> *----
> -
> * FORM alv *
> *----
> -
> * ........ *
> *----
> -
> FORM alv.
>
> PERFORM e03_eventtab_build USING gt_events[]. "+EC1
> PERFORM e04_comment_build USING
> gt_list_top_of_page[]. "+EC1
> prognm = sy-repid. "+EC1
>
>
> CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
> EXPORTING
> i_callback_user_command = 'USER_COMMAND'
> i_callback_program = g_repid
> it_fieldcat = gt_fieldcat[]
> it_events = gt_events[] "+ESC
> it_sort = it_sort[]
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> is_variant = g_variant
> i_save = g_save
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> TABLES
> t_outtab = gt_outtab.
>
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
>
> *----
> -
> * FORM fieldcat_init *
> *----
> -
> * ........ *
> *----
> -
> * --> I_FIELDCAT *
> *----
> -
> FORM fieldcat_init
> USING i_fieldcat TYPE slis_t_fieldcat_alv.
> DATA: ls_fieldcat TYPE slis_fieldcat_alv.
> DATA: pos TYPE i VALUE 1.
> CLEAR ls_fieldcat.
Please note to keep on incrementing pos variable for column position.
 pos = pos + 1.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'VBELN'.
> ls_fieldcat-ref_tabname = 'VBAK'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
 pos = pos + 1. ===> after every append to field catalog.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'POSNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ETERN'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MATNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MVGR1'.
> ls_fieldcat-ref_tabname = 'MVKE'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WERKS'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LGORT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ERDAT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WADAT_IST'.
> ls_fieldcat-ref_tabname = 'LIKP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'DAYS'.
> ls_fieldcat-ref_fieldname = 'DAYS'.
> ls_fieldcat-seltext_s = '# Of Days'.
> ls_fieldcat-seltext_m = '# Of Days'.
> ls_fieldcat-seltext_l = '# Of Days'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> *Begin CH01
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'KWMENG'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LFIMG'.
> ls_fieldcat-ref_tabname = 'LIPS'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'OBD'.
> ls_fieldcat-seltext_s = 'OBD'.
> ls_fieldcat-seltext_m = 'Outbound Del'.
> ls_fieldcat-seltext_l = 'Outbound Delivery'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> * ls_fieldcat-col_pos = pos.
> * ls_fieldcat-fieldname = 'OBD_POS'.
> * ls_fieldcat-seltext_s = 'OBD Ln'.
> * ls_fieldcat-seltext_m = 'Outbound Del Ln'.
> * ls_fieldcat-seltext_l = 'Outbound Del Line'.
> * ls_fieldcat-outputlen = 10.
> * APPEND ls_fieldcat TO i_fieldcat.
> * CLEAR ls_fieldcat.
> *
> *End CH01
>
> *JR
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SOLDTO'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-seltext_m = 'Sold To'.
> ls_fieldcat-seltext_l = 'Sold To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SHIPTO'.
> ls_fieldcat-ref_tabname = 'VBPA'.
> ls_fieldcat-seltext_m = 'Ship To'.
> ls_fieldcat-seltext_l = 'Ship To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> *END JR
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'EDATU'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-seltext_m = 'Requested Delivery date'.
> ls_fieldcat-seltext_l = 'Requested Delivery date'.
> ls_fieldcat-outputlen = 20.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> *FOR ALV SORT & SUBTOTAL
> CLEAR it_sort.
> it_sort-spos = '0'.
> it_sort-fieldname = 'VBELN'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '1'.
> it_sort-fieldname = 'POSNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> it_sort-subtot = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '2'.
> it_sort-fieldname = 'MATNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '3'.
> it_sort-fieldname = 'MVGR1'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '4'.
> it_sort-fieldname = 'ERDAT'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
>
> CLEAR it_sort.
> it_sort-spos = '5'.
> it_sort-fieldname = 'WADAT_IST'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-down = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> *
> * CLEAR it_sort.
> * it_sort-spos = '6'.
> * it_sort-fieldname = 'PERNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> *
> * CLEAR it_sort.
> * it_sort-spos = '7'.
> * it_sort-fieldname = 'VORNA'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '8'.
> * it_sort-fieldname = 'NACHN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '9'.
> * it_sort-fieldname = 'VKGRP'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '10'.
> * it_sort-fieldname = 'VBELN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '11'.
> * it_sort-fieldname = 'ERDAT'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '12'.
> * it_sort-fieldname = 'BEZEI'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
>
> * clear it_sort.
> * it_sort-spos = '1'.
> * it_sort-fieldname = 'BELNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> * append it_sort.
>
>
> ENDFORM.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> *&----
> -
> *& Form VARIANT_INIT
> *&----
> -
> * text
> *----
> -
> * --> p1 text
> * <-- p2 text
> *----
> -
> FORM variant_init.
> *
> CLEAR g_variant.
> g_variant-report = g_repid.
> ENDFORM. " VARIANT_INIT
>
>
>
> *----
> -
> * FORM f4_for_variant *
> *----
> -
> * ........ *
> *----
> -
> FORM f4_for_variant.
> *
> CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
> EXPORTING
> is_variant = g_variant
> i_save = g_save
> * it_default_fieldcat =
> IMPORTING
> e_exit = g_exit
> es_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 2.
> MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
> WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
> ELSE.
> IF g_exit = space.
> p_vari = gx_variant-variant.
> ENDIF.
> ENDIF.
> ENDFORM.
> *&----
> -
> *& Form PAI_OF_SELECTION_SCREEN
> *&----
> -
> * text
> *----
> -
> FORM pai_of_selection_screen.
> *
> IF NOT p_vari IS INITIAL.
> MOVE g_variant TO gx_variant.
> MOVE p_vari TO gx_variant-variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant.
> g_variant = gx_variant.
> ELSE.
> PERFORM variant_init.
> ENDIF.
> ENDFORM. " PAI_OF_SELECTION_SCREEN
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> *----
> -
> * FORM e03_eventtab_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E03_LT_EVENTS *
> *----
> -
> FORM e03_eventtab_build USING e03_lt_events TYPE
> slis_t_event.
> DATA: ls_event TYPE slis_alv_event.
>
> CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
> EXPORTING
> i_list_type = 0
> IMPORTING
> et_events = e03_lt_events.
> READ TABLE e03_lt_events WITH KEY name =
> slis_ev_top_of_page
> INTO ls_event.
> IF sy-subrc = 0.
> MOVE gc_formname_top_of_page TO ls_event-form.
> APPEND ls_event TO e03_lt_events.
> ENDIF.
> ENDFORM.
>
> *----
> -
> * FORM e04_comment_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E04_LT_TOP_OF_PAGE *
> *----
> -
> FORM e04_comment_build USING e04_lt_top_of_page TYPE
> slis_t_listheader.
> DATA: ls_line TYPE slis_listheader.
>
> *Report Title
> CLEAR ls_line.
> ls_line-typ = 'H'.
> ls_line-info = text-007.
> APPEND ls_line TO e04_lt_top_of_page.
> *
> *
> **Doc Type Desc.
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-008.
> ** ls_line-info = p_matnr.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-009.
> ** ls_line-info = p_werks.
> * append ls_line to e04_lt_top_of_page.
> *
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-010.
> ** ls_line-info = p_stlan.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-011.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-012.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
>
>
>
> ENDFORM.
>
> *----
> -
> * FORM top_of_page *
> *----
> -
> * ........ *
> *----
> -
> FORM top_of_page.
>
> CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
> EXPORTING
> it_list_commentary = gt_list_top_of_page.
>
>
> ENDFORM.
>
> *----
> -
> * FORM auth_check *
> *----
> -
> * ........ *
> *----
> -
> FORM auth_check.
>
> AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
> ID 'VKORG' FIELD p_vkorg.
> IF sy-subrc NE 0.
> MESSAGE e054 WITH p_vkorg.
> ENDIF.
>
>
> ENDFORM. " auth_check
>
>
> *&----
> -
> *& Form USER_COMMAND
> *&----
> -
> FORM user_command USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE r_ucomm.
> WHEN '&IC1'.
> PERFORM display_so_order USING r_ucomm
> rs_selfield.
>
> ENDCASE.
>
> ENDFORM.
>
> *&----
> -
> *& Form display_sales_order
> *&----
> -
> * text
> *----
> -
> * -->P_R_UCOMM text
> * -->P_RS_SELFIELD text
> *----
> -
> FORM display_so_order USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE rs_selfield-sel_tab_field.
> WHEN '1-VBELN'.
> SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
> CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
> WHEN '1-MATNR'.
> SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
> CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
> WHEN '1-OBD'.
> SET PARAMETER ID 'VL' FIELD rs_selfield-value.
> CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
> WHEN OTHERS.
> MESSAGE i000(z1) WITH 'Please Click on the Valid
> Selection'.
> EXIT.
> ENDCASE.
>
>
> ENDFORM. " display_sales_order
>
> *----
> -
> * FORM EDit_table *
> *----
> -
> * ........ *
> *----
> -
Message was edited by: Anurag Bankley

How to download data into one cell of excel in different lines

Hi All,
My Report downloads data from R/3 to excel. Now one particular field contains multiple lines, which i needs to download into different lines into that particular cell(of excel). how can i do this.
I found one method for this and that is cl_abap_char_utilities=>newline.But this is in abap version 6.0.
But i am working in version 4.6c. do we have any method or anything that meets my requirement in 4.6c.
Please let me know.
Thanx in Advance
Subhani.

why do you split them to the internal table ,then download it?
Is you special field long text?
If is ,you can use FM READ_TEXT to put it into an internal table ,then download it.

How to print the address of a smart form in different line?

hi ,
I have a smartform for payment advice. It's working properly but problem is in address window. i am using sap's given address window . City district and pincode is showing in same line i want to display it different line. initially i didnot use address window I pass all the address field to the smartform but then problem is if any field is empty it showing the blanline in output of smartform then i use address window. how can i show city district and pincode in different line ? i need your suggestion.

Hi friend,
Yes the link will provide you the information required. But it too has few disadvantages because in some cases it may also fail.
Else just do like this create an internal table of line type string. Add all the address details into it as you required.(Here you have provision to add the format ie you can decide which line should contain which data). Then do delete blank lines.
Then loop the internal table and print the address this will solve your problem. In my project i solved the issue like this.
If you still have queries please revert back to me i will help you.
Thanks,
Sri Hari.

Different Cost Centers for Different Line Items in a single Reservation

Hello Gurus,
When we create a Material Reservation, we give the cost center at the header level and that cost center is accounted for each of the line items in the reservation. But when the reservation has many line items which depend on different cost centers, there is a need to enter different cost centers for different line items in the same Material Reservation. How can this be done? Please suggest.

Hi,
It's a standard restriction in SAP functionality where one reservation document can only accommodate one cost center.
You can not maintain multiple cost centres for individual line items.
You have to create seperate Reservations for each cost centre.
check below thread:
ONE RESERVATION FOR DIFF COST CENTERS
Umakanth R
Edited by: Umakanth R on Dec 8, 2011 7:53 AM

Printing multiple PR with different line items in smartform

Hello all,
I have an requirement to print multiple PR with different line items on different pages.
So,suppose two PR are there,PR1 and PR2 with n no of line items,then i should get each PR on different page with its line items.
Note: One loop processing is already there on line items.
Best Regards,
Anurodh

Hi,
Fetch all the PRs and its corresponding items into 2 different table. Then Loop at the internal whihc contains the PRs and call the 2nd internal table for its items and call the FM for smartforms and pass them.
LOOP AT it_PR.
fetch all the items into it_PR_item
Call Function Fnam
Passign the it_PR_item
ENDLOOP.
Regards,
Aditya

Compare two string in different line in textarea

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class TextCounterPanel extends JPanel {
private JTextArea textInput;
private JLabel lineCountLabel;
                    public TextCounterPanel() {
                    setBackground(Color.DARK_GRAY);
                    textInput = new JTextArea();
                    textInput.setBackground(Color.WHITE);
                    JPanel south = new JPanel();
                    south.setBackground(Color.DARK_GRAY);
                    south.setLayout( new GridLayout(4,1,2,2) );
                         JButton countButton = new JButton("Process the Text");
                         countButton.addActionListener( new ActionListener() {
                              public void actionPerformed(ActionEvent evt) {
                                   processInput();
                         south.add(countButton);
                    lineCountLabel = new JLabel(" Number of lines:");
                    lineCountLabel.setBackground(Color.WHITE);
                    lineCountLabel.setForeground(Color.BLUE);
                    lineCountLabel.setOpaque(true);
                    south.add(lineCountLabel);
                    setLayout( new BorderLayout(2,2) );
                    setBorder(BorderFactory.createLineBorder(Color.DARK_GRAY));
                    JScrollPane scroller = new JScrollPane( textInput );
                    add(scroller, BorderLayout.CENTER);
                    add(south, BorderLayout.SOUTH);
public void processInput() {
String text,vin; // The user's input from the text area.
text = textInput.getText();
vin =text.substring(25,42);
lineCountLabel.setText(" vin: " + vin);
} // end class TextCounterPanel
How can I compare two string in different line in text area

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class TextCounterPanel extends JPanel {
private JTextArea textInput;
private JLabel lineCountLabel;
public TextCounterPanel() {
setBackground(Color.DARK_GRAY);
textInput = new JTextArea();
textInput.setBackground(Color.WHITE);
JPanel south = new JPanel();
south.setBackground(Color.DARK_GRAY);
south.setLayout( new GridLayout(4,1,2,2) );
JButton countButton = new JButton("Process the Text");
countButton.addActionListener( new ActionListener() {
public void actionPerformed(ActionEvent evt) {
processInput();
south.add(countButton);
lineCountLabel = new JLabel(" Number of lines:");
lineCountLabel.setBackground(Color.WHITE);
lineCountLabel.setForeground(Color.BLUE);
lineCountLabel.setOpaque(true);
south.add(lineCountLabel);
setLayout( new BorderLayout(2,2) );
setBorder(BorderFactory.createLineBorder(Color.DARK_GRAY));
JScrollPane scroller = new JScrollPane( textInput );
add(scroller, BorderLayout.CENTER);
add(south, BorderLayout.SOUTH);
public void processInput() {
String text,vin; // The user's input from the text area.
text = textInput.getText();
vin =text.substring(25,42);
lineCountLabel.setText(" vin: " + vin);
} // end class TextCounterPanel

Switching iPhone 5 to a different line?

Hello All!
I have a quick question before the phone comes (hopefully in the next few days!)
My sister's line was eligible for an upgrade, so I used her upgrade to get the iPhone 5. She wants my 4S, so I was hoping once the iPhone 5 arrives, to trade our phones around (while keeping our numbers). Do I need to call Verizon to activate the iPhone 5 on a line? Or is this something I can do online?
I just don't want to turn the phone on and have her line get disconnected (as she is in another town at school.) I just want to switch the iPhone 5 for my current phone once it arrives. I'd prefer an online method, but any advice you have is welcomed! Thanks!

I called cust svc for my new 5 today. I wanted to do as you said and activate it on a different line. I was told with the new nanosim (sp?) card this not possible. Apparently when I preordered my 5 it came with the new sim card programmed for the number I upgraded from and if I tried to activate it on the line I wanted to it would say dead sim card.
My two options were to activate it on the line I upgraded and then 24 hours later switch the phones around or go to the store and they would give me a new sim card. I went to the local store and they said they were not shipped these new sim cards and therefore the only option I had was to activate the phone and wait 24 hours. So tomorrow night I will call or go online and switch the phones...

Switching an upgrade to a different line

I have a family plan with 5 lines
One is eligible for an upgrade, and I want to switch it to another line to get an upgrade
So, Line A is eligible for an upgrade, I want to put it on Line B
Line A was activated 2 years ago in August, so next month, my 2 year contract will be up with that line
Can I close that line? I know when you do an upgrade you resign a contract, but does the contract signing now apply to Line B since that is the one I used it on?
Or do I have to keep Line A open for another 2 years and just not use it?
Thank you for your help.... (if any of the above makes sense to anyone)

When you "transfer" an upgrade (I use that term loosely, I'll explain this later) you are signing a new contract on the line that is eligible, not the line that is using the phone. The reason I quoted transfer, is because you can't actually transfer an upgrade. All you do is purchase the phone on the eligible line, and use it on a different line. You don't even have to be on the same account to do this.
Also, when you're eligible to upgrade is not when your contract is up. You are eligible to upgrade at 20 months into your 2 year contract. You can cancel the line after completing the full 24 months. Otherwise you will have to pay an ETF.
So basically, purchase the phone you want on line A (the eligible line) and this will extend line A's contract another 2 years. When you get the phone, activate it on line A first (this is to accept the terms of service you sign) and then you can activate the phone on line B (the one that is not yet eligible) and line B's contract will be the same as it was before. When line B becomes eligible for an upgrade, you can use that for line A if needed.
If you want to use line A's upgrade for line B, and then cancel line A, you will pay the ETF. $350 for smartphones, or $175 I believe for feature phones.

How to combine two Info provider data matained at different line items?

Hello Friends,
I have a requirement in which they want to combine the invoice line item data with the GL line item data , in which both are maintained at different line items.......
For e.g:
DSo 1:
Invoice no                Inv line item         Net price
5100000674            10                         300
5100000674            20                         400
5100000674            30                         200
5100000674            40                         100
DSO2:
Acc Doc no            Line item            GL account    Invoice number            amount
9480000000               1                      21110000         5100000674          100
9480000000               2                      31110000         5100000674          200
I tried Infoset, but multiple lines are generating..... as both the line items are maintained at different line items..... Please help me with some ideas and suggestions.......
Thanks for your time..............................................................................

Hi,
You should maintain the InfoObejcts (Charecteristcis) in both DSO's other wise it will disiplay # in reports.
1. While loading the data to DSO's use LOOKUPs in transformations and load teh full fledged data to DSO-2, (in sequence if it will come in second place.)
2. Check with InfoSet Innrr/Outer Joins option.
Else use FM based on both DSO's and cretae DataSourcea nd load the data to another DSO/Cube and build report on that.
Thanks
Reddy

Export or Print different line weights (like in AutoCAD)

Is there a way to Export / Print / Save As artwork with reduced line weights like you can in AutoCAD? i.e. Export a PDF and all line thickness is reduced by 50%
I have a map project that I'm working on and I want to export different sections of the map at different scales (different zoom levels) which when you export a PDF, displays line thickess differently for each level of zoom. I'd like to have it setup similar to AutoCAD where I can create a window and now matter what level of zoom, the lines are exported at the same thickness (I'd use Artboards as export windows)
Sorry if this is confusing! Is there a Plug-In or another way to do this without physically changing the line weights?

Do you want a PDF that displays different line weights depending on zoom level? Not possible. Or do you want to export a PDF with line weights different from the ones in your Illustrator file? Possible, even recordable as an action.
Once the artwork is selected, go to Object > Transform > Scale. Scale to 50% and turn on Scale Strokes & Effects, then click OK. Repeat, this time with scaling set to 200% and turn off Scale Strokes & Effects. Save or Save a Copy, then undo twice.
Here it is an an action: http://dl.dropbox.com/u/5005292/Set_1.aia

Word Processing problem: How do I highlight different lines to edit at....

How do I highlight different lines/words at the same time to edit simultaneously.
Ex
I like school
School is fun
Let's go to school
I can't wait
If I wanted to highlight the first and third line to center at the same time, how exactly would I do that?

Hi Jeremiah,
Can't be done. AppleWorks doesn't support non-contiguous selection.
For your particular example, you can center lines one and three by this procedure:
Place the insertion point in line 1.
Press command-\
Place the insertion point in line 3.
Press command-\
Regards,
Barry

How do i put results in different lines in crystal reports

I have this in my formula
else
"Madame,Monsieur" + " " + {GfCnBio.GfCnBio_Last_Name}
i would like to put
Madame, Lastname
Monsieu, Lastname
on 2 different lines.
please help
thanks you

Put what's below into a Text Object with a carriage return (Enter key) after the first line:
Madame, {GfCnBio.GfCnBio_Last_Name} <Carriage Return here>
Monsieur, {GfCnBio.GfCnBio_Last_Name}
OR do the same with a formula using a CHR(10) after the first line:
"Madame," + " " + {GfCnBio.GfCnBio_Last_Name} < put CHR(10) here >
"Monsieur," + " " + {GfCnBio.GfCnBio_Last_Name
Edited by: James Terry on Sep 9, 2008 6:12 PM
Edited by: James Terry on Sep 9, 2008 6:14 PM

Different line terminator for SocketChannel

Any ideas on how to specify a different line terminator than '\n' for the SocketChannel.read() method, such as ASCII character 127?

Ok..and here's a third answer....
Socket s= my_socket_channel.socket();
InputStreamReader isr = new InputStreamReader(s.getInputStream());
String a_line="";
boolean reading=true;
while (reading)
int c = isr.read();
if (c==-1) {if (!a_line.equals("")){process(a_line);}
                 reading=false;}
if (c==127){process(a_line); a_line="";}
else{
        char cc = (char)c;
        a_line=a_line+cc;
}How does that sound?

To access different lines in an in internal table

Hi People,
How can I access different lines of an internal table where there is not set index which I have to access? I have to write only the last occurence of each kunnr getting stored in the internal table. Can somebody help?
Thanks,
AM

Hi AM,
   You have got multiple solutions, each one of those are based on some assumptions.
   1. At end - this solution will work if kunnr is the first field in your internal table (Sorted).
   2. Edde's solution will work if all the values for kunnr in the internal table are same.
   If not of this applies then you need write a piece of logic between LOOP and ENDLOOP, but the right solution will depend on the exact nature of your problem. More you explain your problem better are the chances of getting a solution.
Regards,
Sanjeev

Substrining different lines

Similar Messages

Maybe you are looking for