Subtemplate not functioning correctly
Hi,
There are 2 pages in a report.My requirement is
1. to show Company logo and some text(say,name of the report) in the header of first page.
2. Depending upon whether the employee is part time or full time , in the 2nd page, data (again some text specific to the part time or full time) should be displayed.
I have used a subtemplate to capture this. I have used seperate sections in the subtemplate for part time , full time and the header. I then call the subtemplate in the main template in the respective location using the import command and call template. i.e. section 'header' in the header of main template and the part time and full time sections in the 2nd page.
But when I run the report it shows blank whereever i have called the subtemplate.I have also used a seperate section in the same subtemplate for only logo to be displayed in the body of the report in main template and this works fine.
The command that i use to import and call the template are as below:
<?import:psxmlp://WMS_HRPD_CNRT_TEMP_1?> in the main template.
in the header i use <?call-template:header?>
I have used an IF condition for the type of employee and a place holder for the employee type and the code is written in the properties -> Add help text.
<?if: A.full_part_time = 'F'?>
<?call-template:fulltime?>
<?else?>
<?call-template:parttime?>
<?end if?>
Please help me on this issue.
Thanks in advance !
Ashwini
Hi, i am doing that, it runs on my pc, but in ebs it does not work.
i am using oracle reports builder 10g, getting the xml and doing my layout in xml pub desktop.
I registered the concurrent program in ebs as oracle reports execution method.
i have 1 data definition - preview data file
and 2 templates, of which 1 is a sub.
it completes with warning.....
i get this error:
9/7/09 8:56:21 AM OPPServiceThread0 Post-processing request 525025.
9/7/09 8:56:21 AM 20897:RT525025 Executing post-processing actions for request 525025.
9/7/09 8:56:21 AM 20897:RT525025 Starting XML Publisher post-processing action.
9/7/09 8:56:21 AM 20897:RT525025
Template code: XXFRGPAYTRR
Template app: XXFRGPAY
Language: en
Territory: ZA
Output type: RTF
9/7/09 8:56:22 AM UNEXPECTED 20897:RT525025 java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:285)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
Caused by: java.io.IOException: Root problem: oracle.apps.xdo.XDOException:No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA,DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.DS_APP_SHORT_NAME DS_APP_SHORT_NAME, B.DATA_SOURCE_CODE DATA_SOURCE_CODE, L.LOB_TYPE LOB_TYPE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE L.APPLICATION_SHORT_NAME= :1 AND L.LOB_CODE = :2 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND (L.LOB_TYPE = 'TEMPLATE' OR L.LOB_TYPE = 'MLS_TEMPLATE') AND ( (L.LANGUAGE = :3 AND L.TERRITORY = :4) OR (L.LANGUAGE = :5 AND L.TERRITORY = :6) OR (L.LANGUAGE = :7 AND L.TERRITORY = :8) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ))
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
... 17 more
9/7/09 8:56:22 AM 20897:RT525025 Completed post-processing actions for request 525025.
http://GC 9630K->6180K(13900K), 0.0032940 secs
Similar Messages
-
I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?
That seems to be OK via WLAN!
It ist better to do the first backup via LAN-cable. -
I cannot activate my phone because my keyboard is not functioning correctly. How do I bypass my password to activate my phone
Are you being asked for your Apple ID and password in order to activate the phone?
~Lyssa -
Spry Menu Issues - Not functioning correctly in Microsoft IE
Hi there,
I am fairly new to web design and dreamweaver.
I have constructed a simple page that I am happy with complete with Spry Menu which again I am happy with. However this spry menu works perfectly in firefox but for some reason on IE my spry menu does not function correctly and goes all over my page!
CORRECT VERTICAL MENU - FIREFOX -
INCORRECT MENU FUNCTION! - IE -
See my CSS Code below for the spry menu in questions - if this helps -
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: inherit;
font-size: 100%;
cursor: default;
width: 1000px;
height: 47px;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: medium;
position: relative;
text-align: center;
cursor: pointer;
width: 318px;
float: left;
height: auto;
background-color: #000000;
border: 2px solid #FFF;
font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: auto;
cursor: default;
width: auto;
position: absolute;
left: -1000em;
font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 318px;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin-top: -5%;
margin-right: 0;
margin-bottom: 0;
margin-left: 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0px;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 1px solid #FFFFFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #bcbdb9;
padding: 0.5em 0.75em;
color: #FFF;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #000;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #000;
color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inherit;
f\loat: left;
background: #FFF;
** I am also using Windows 8 and Dreamweaver CS6 If this helps.**
Any help with this would be fantastic as I need this to be resolved before the end of the week.
Any further information required please message me to find out.
Thanks,
JamieTHE CONFLICT IS BETWEEN YOUR DOCUMENT CSS AND THE SPRY CSS.
It is because the <li> and <a> TAGS have been styled and therefore OVERRIDDEN THE SPRY CSS.
Use CLASS TAGS e.g. <li class="anyclass"> and <a class="anyclass">
and STOP USING THE <a> TAGS.
N.b. you may need to unstyle any <a> or other TAGS that conflict with the SPRY CSS. (However it's best to start over knowing that styling basic tags may affect the SPRY CSS). -
Hyperlinks Are Not Functioning Correctly
I have a problem with the some of the hyperlinks in my
WebHelp Pro project not functioning correctly once the project is
compiled. What happens is that when I click on a hyperlink the text
doesn't change from blue to purple. Not all the hyperlinks on a
page are affected; some may work while others do not.
When I look at the HTML code, I see two different things
happening, and both things may not occur in the same code:
1) In some documents the code reads "a visited=0000ff." The
value should be 800080.
2) In other documents "font color=blue" is being added to the
HTML code for a particular hyperlink. Other hyperlink code in the
same document may be unaffected.
I have checked the font color in the editor to make sure it
was set to "automatic" before I created the hyperlink. I removed
the hyperlinks altogether, recompiled, then opened the document
back up and recreated the hyperlinks. The problem still exists.
Every document in my project is using the default.css style sheet.
I use the same paragraph style throughout the project, both on the
links that work correctly and those that do not.
Has anyone ever experienced this problem? And if so, do you
know the fix? I could manually edit the HTML code before publishing
my project, but that is just a bandaid fix.The hyperlink color is controlled by the style sheet. I edit
my style sheets in a text editor. Make sure you clear your browser
history before testing the color changes.
FWIW, I like my links to stay blue--I usually have the color
change to purple in hover just to indicate that what is moused is
indeed a viable link. -
Widgets not functioning correctly on tablet layout
I've noticed that my new ipad is showing my tablet layout of muse website, but some of the widgets are not functioning correctly. I have tried a few widgets for the tablet layout and it has resulted in problems.
Please take a look at www.littlesouth.com for an example of the current error.Hi
I tried to check the site in tablet and it works fine.
Can you please elaborate as which specific widgets are not working ? and are they on home page or any particular page within the site.
Thanks,
Sanjit -
ICal not functioning correctly
First of all, I have been using Entourage which I sync with iCal so that I can sync my calendar with my iPhone. I would like to discontinue using Entourage but for some reason, iCal is not functioning correctly. First, the calendars do not appear in the left hand window and I cannot seem to figure out how to get them to appear.
Second, when iCal opens off of the dock, there is nothing showing on the calendar at all. When I change the view (i.e., month, to week) then all of my scheduled events appear. When I go back to the original view, everything appears. When I attempt to sync with MobileMe, I get a message at the website that "a script is not responding." I don't know whether the two are related or not.
Any help?????I have the same problems. Also, I can't enter a "multi day' event, the system tells me there is a fault and it cannot synch. I was automatically updated to MobileMe, but the system isn't performing as promised.
-
Touchpad not functioning correctly
I have an Envy 17,(Windows 7) and the touch pad is not functioning correctly. I have had it do similar things in the past but they seemed to fix themselves after a few minutes, but this time it just keeps messing up. I CAN click on programs to open them but once in a program, I cannot click on anything. I CAN click on links when online, but they always open in a new tab and when I attempt to click on a new tab, the tab completely closes out. Once a program is opened, I cannot close/minimize/maximize it using the touchpad, nor can I access File/Edit/other menu options. I also cannot click in a typing field. (I'm using a different computer to do this post)I can barely move the curser around. It jumps or freezes up. I move it up about an inch and as soon as I take my finger off the touchpad the curser goes back to where it originally was. I've tried restarting the computer but that hasn't worked. I've attempted tried some other things as well, but since I cannot click on anything with the touchpad and can barely move the curser, I am at a loss for what to even try. Everything was working fine this morning. I literally got up from the computer, made breakfast and sat back down and it was all glitched up. No one had touched it... I had not recently downloaded anything nor have I made any updates to the computer. Thank you, Neyephe
Hello there, It sounds like there is a hardware issue with your touchpad, which you need to replace. As stated in the warranty, the touchpad may only be replaced by an Authorized Service Provider. If you cannot find any places that are authorized, you may contact the HP Support Center via phone and arrange a date for your touchpad to be replaced. In the meantime, you can buy a USB mouse to navigate your laptop. Best wishes getting your issue fixed! Best Regards,Shawn
-
sits such as facebook, yahoo, and sports illustrated do not function correctly on firefox but they do on my internet explorer. I believes its somehow set itself into the same format used for cellular devices... My JSU.edu page says somethin about it being in (portal mode). It is also a different format now that normal.
Hi @TheBigGiggle ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17 Notebook PC and a keys not functioning correctly. Here is a document on cleaning the keyboard.
I would start with air on the keys as sometimes debris can cause this issue.
Here is a link to uninstall the keyboard. In the device manager have you uninstall all that is listed in keyboards, restart the computer after uninstalling, it should reinstall automatically and resolve any issues with the keyboard.
Here is a link to keyboard troubleshooting.
Here is a fix from Microsoft that might help.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
N96 Telephone Service Not Functioning Correctly
Good evening folks,
Now, I've had this problem for as long as I've had an N96. TWO N96's in fact, as my first was replaced by Nokia due to the screen-slide connection malfunctioning. Both have been fully firmware updated and restored on multiple occasions in an attempt to fix the problem.
The telephone service on the handset has the habit of not functioning correctly, like the service has hanged or just doesn't respond.
For example, I find a contacts name in contacts, press the green key to show their contact numbers, and green again on the number I wish to call- nothing happens, other than the available numbers disappear and you return to the regular contacts view. This is what would normally happen anyway, only you'd have an outgoing call happening over it and showing the "telephone" screen.
Or, example two, in a text message I chose Options > Call > Voice Call and press the select or middle button to initiate the call- No call, instead the options dialogue disappears and I return to the standard message view. Again, I should be in an outgoing call, not viewing my text message.
Example three, to really show the telephone service isn't working;
I'm in full signal, text messages are functioning correctly and the mobile web is working flawlessly. A friend sat next to me rings me and is immediately directed to my voicemail, not a single indication from the handset that I may have been receiving a call.
Seconds later I receive a text message from my operator to let me know about a new voicemail my friend just left me.
So, the telephone service isn't functioning as it should be.
A quick restart fixes the problem in 4 out of 5 cases, however usually within 24 hours the problem is persisting again.
Not being able to make outgoing calls isn't a problem, because at least then I know the telephone service has failed on me and I can restart.
A potentially important incoming call about anything being directed immediately to my voicemail? Problematic, especially if they don't leave a message and instead just keep trying me, as I receive no notification from my operator about missed calls and there is no way other than to try and make an outgoing call as to determine whether the service is still functioning.
It isn't shown as a regular application whilst not in a call and I don't believe I should even have to check if it's still running as this function is the main function implied in the device category 'smartphone'.
Rant over, so if there's anyone out there who could shed some light onto this situation, please do.
Also, kind of off topic- but in the case that this is a universal problem (which I'm assuming it is, having had two completely different handsets with the same symptoms), do I go after Nokia to provide me with a different model of handset, or the supplier (The Carphone Warehouse) since my handset isn't properly providing a function that is advertised?
Somehow I presume I'm rightfully entitled to a reimbursement or different model. Hopefully.
Thanks in advance peopleYou're so right.... I managed to get over the problems, never upgraded the firmware... Once I got all the apps I use and needed, never touched it.... Still the phone is a mess, worst ever... I came from an Iphone, fleeing from lock OS and stuff, and found myself in a Symbian hell..... Definitely Windows Mobile... I'm so down on this phone, I spent 650 dollars, one year ago.... The worst investment ever... Never again a Nokia or a Symbian smartphone, for cheap ones apparently are the best. I'll wait another year, to feel less pain when buying a new one for 600-1000 dollars.
Solution: Buy another phone... Better if it is a Windows Mobile.... As HTC for example.
Regards, -
Bluetooth not functioning correctly.
Bluetooth not functioning correctly. I have version 10.10.2. How can I get it to connect and be stable?
OK. Spooky. Minutes.... Minutes after I posted, my Mac connected...
-
CUC Cluster not functioning correctly
Saw a few posts and documents relating to this issue but they don't match up perfectly with my particular scenario. Basically, the customer could no longer log into the Unity Pub so we had to do a rebuild as nothing was working. The sub took over as it should, a co-worker rebuilt their Pub and the split-brained effect never went away. In, fact they arn't communicating at all almost a week later. Here are the things I've checked so far:
DB Replication: (from the subs perspective)
DB and Replication Services: ALL RUNNING
Cluster Replication State: Only available on the PUB
DB Version: ccm9_1_1_10000_11
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from XXXXX-UCXN02 (2 Servers):
PING CDR Server REPL. DBver& REPL. REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) RPC? (ID) & STATUS QUEUE TABLES LOOP? (RTMT)
XXXXX-UCXN01 10.200.9.21 0.575 Yes (2) Connected 0 match Yes (2)
XXXXX-UCXN02 10.103.9.22 0.067 Yes (3) Connected 0 match Yes (2)
(Pubs perspective)
DB and Replication Services: ALL RUNNING
DB CLI Status: No other dbreplication CLI is running...
Cluster Replication State: BROADCAST SYNC Completed on 1 servers at: 2015-01-23-17-19
Last Sync Result: SYNC COMPLETED 603 tables sync'ed out of 603
Sync Errors: NO ERRORS
DB Version: ccm9_1_1_10000_11
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from XXXXX-UCXN01 (2 Servers):
PING CDR Server REPL. DBver& REPL. REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) RPC? (ID) & STATUS QUEUE TABLES LOOP? (RTMT) & details
XXXXX-UCXN01 10.200.9.21 0.084 Yes (2) Connected 0 match Yes (2) PUB Setup Completed
XXXXX-UCXN02 10.103.9.22 0.663 Yes (3) Connected 0 match Yes (2) Setup Completed
Clusters look good:
admin:show network cluster
10.200.9.21 xxxxx-ucxn01.xxxxx.local xxxxx-ucxn01 Publisher authenticated
10.103.9.22 xxxxx-ucxn02.xxxxx.local xxxxx-ucxn02 Subscriber authenticated using TCP since Fri Jan 23 16:42:15 2015
Server Table (processnode) Entries
10.200.9.21
10.103.9.22
Successful
Overall, they are in that split-brained mode and working with CUCM but I'm not sure why it hasn't corrected itself. Both the pub and sub have been restarted to no effect.... Any ideas on why this is still happening? I am in the process of pulling logs.
Error shown by CUC at the Admin page after login:
Communication is not functioning correctly between the servers in the Cisco Unity Connection cluster. To review server status for the cluster, go to the Tools > Cluster Management page of Cisco Unity Connection Serviceability.Check NTP. Ensure Unity is synced to a stable good stratum source - preferably stratum 1,2 or 3.
On your version, time slips can cause memory leaks on servm. This in turn affects cluster communication.
You said you couldn't access Pub. Pub would have been on high CPU. Another symptom of this issue.
You can confirm by looking at the core dumps - 'utils core active list'
See if there are any servm core dumps. Most likely the server is affected by CSCug53756 / CSCud58000
HTH
Anirudh -
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting? -
"ChnCFCFiltCalc" in Crash option not functioning correctly
It appears that the "EndPoints" option for the "ChnCFCFiltCalc" command is not functioning correctly. It does not seem to be reflecting the points to pad the data at the beginning and end of the signal. This is based on the results of filtering done with and without the option activated. Not activating the option appears to reflect the data and you get the results you would expect to see with the option activated. Activating the option give you results you would expect to see without the option activated.
I am using Version 8.0.981
This was functioning correctly in previous versions. Can you tell me when the "EndPoints" option stopped functioning correctly? I assume it was with Version 8.0. Is it correc
ted in Version 8.1?Hi,
The parameter "CFCPREEVENTTYPE" is an enumeration variable with the selection "EndPoints" or "ZeroMagnitude" and not is optional.
Every mathematical function in DIAdem represents their parameters in global variables - eg. "CFCPREEVENTTYPE" as one parameter of the function "ChnCFCFiltCalc".
If you now call a function in a VBScript you have two possibilities
a) call the function with parameters like ChnCFCFiltCalc(X, Y, E, CFCFiltType, 0,"EndPoints")
b) call the function without parameters like ChnCFCFiltCalc
In case b) DIAdem will use the current content of the global parameter variable.
Maybe that this is you problem.
Kind regards
Walter -
Elements 12 Organizer not functioning correctly uploading files and viewing.
Elements 12 Organizer does not function correctly. It will upload new files but will not allow me to view correctly or edit. I attempts to reconnect files. When I attempt to do this manually it states that the files are already there. Very frustrating and Adobe representatives will not assist me.
Windows Media Player 12 is installed.
Windows Media Player
Version 12.0.9600.16384
Operating System
Version:
6.3.9600
System Locale:
en-GB
Service Pack:
0.0
User Locale:
en-GB
Build Lab:
9600.winblue_gdr.131030-1505
Geo ID:
United Kingdom
Type:
Workstation
DRM Version:
11.0.9600.16384
Architecture:
x86
Indiv Version:
2.9.0.1
Processors:
8
Video codecs are:
Type
Name
Format
Binary
Version
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Intel IYUV codec
IYUV
iyuv_32.dll
6.3.9600.16384
ICM
Cinepak Codec by Radius
cvid
iccvid.dll
1.10.0.12
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.3.9600.16384
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Intel IYUV codec
IYUV
iyuv_32.dll
6.3.9600.16384
ICM
Microsoft RLE
MRLE
msrle32.dll
6.3.9600.16384
ICM
Microsoft Video 1
MSVC
msvidc32.dll
6.3.9600.16384
ICM
proDAD Codec
pDAD
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.3.9600.16384
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.3.9600.16384
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2, VC1S
wmvdecod.dll
6.3.9600.16384
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.3.9600.16384
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.3.9600.16384
Windows Media Player plays .mps files without problems
Quick Time Player v7.7.4 installed (at suggestion from adobe premiere organiser). Will not play .mps files
Adobe Premiere 12 organiser will not play .mps files, editor will play and edit them.
Media Player Classic not installed
Maybe you are looking for
-
Downgrade from Vista to XP (ThinkPad X301) - are there benefits here?
Hi, i wonder: whether it is worthwhile migrating to Windows XP from Vista? what profits are? disk space? boot time? performance? speed? power utility? I am interested in your opinions, what you would do? stay? (vista) downgrade? (XP) or wait? (for Wi
-
File sharing - can't see a Mac that's asleep
Trying to setup file sharing between my Mac (PBook G4) and a team member's Mac. Problem: I can't access the other Mac through the Network or Go menu (using IP number) when the other Mac is asleep. I have to go over to the other machine, wake it (just
-
How to synchronise my MacBook Air to my Imac
Hello When I go to my office, I take my MacBook Air When I come back home, what i have done on my MacBook Air is not on my IMac at home. How to synchronise both, so that I can find the emails I have been wroten, the files I have done etc...
-
How to convert an pdf image into a jpeg
I just purchased export pdf and I'm trying to convert from pdf to word or ppt. The pdf is an image / logo that I want to make a jpeg. I used the export utility and keep getting random characters and not an image. I'm guessing it's looking for text.
-
Enregistrer 2 ports série en même temps LV 8.5
Bonjour à tous, j' aimerais enregistrer les données de 2 ports série en même temps en utilisant NI VISA, après des recherches je pense qu'une boucle producteur/consommateur serait le bon choix mais je suis débutant en labview et je ne comprend pas co