Subtitle created from DVDSP cannot display in VLC

i build a disc from DVDSP with subtitles, it display fine in DVD Player-(Mac Apps), when i press the subtitle button it pops out.
but here's the problem, when i using the VLC player, even i click the subtitle track, it just will not appear...forever.
any steps i should aware about creating the subtitle in DVDSP?
longing for advice!
G5 Mac OS X (10.3.9)

Explicitly use the class in the SWC.
That is, do:
var faceMc:angry = new angry();

Similar Messages

Unable to create Material CR , cannot display the page , dump in ST22

Hi Experts,
We are implementing MDG with EHP6 with following components installed with
But I am unable to create Material CR . I am getting the initial page for Create Material but after I hit continue, the next page cannot be displayed .
It is creating an ST22 dump that the config id 'MDG_BS_MAT_PLANT_LIST_ATS' is having an invalid column 'DISPO_TXT' . But I am unable to find the relevant UIBB for this config id . Any thoughts on this issue and how to resolve it. How can I edit the configuration , I don't see that UIBB .
I am unable to find the UIBB for config id 'MDG_BS_MAT_PLANT_LIST_ATS'
I am unable to see the UIBB for MDG_BS_MAT_PLANT_LIST_ATS
I could see the component configuration for MDG_BS_MAT_PLANT_LIST_ATS

I found a note 1830324 from SAP regarding this issue , but it is related to SP08 and we are already in SP09.
This note is about the List Component (WD ABAP component FPM_LIST_UIBB_ATS). When the List Component is started it reads the columns from the configuration. All columns in the configuration should be part of the field catalog that is defined by the feeder class (feeder class method get_definition, parameter io_field_catalog). Otherwise the column is invalid (this could happen e. g. when a column that has already been configured is later removed from the field catalog). When such a invalid column is detected the List Component should raise an X-message and in the short text the name of the configuration and the name of the invalid column should be mentioned. The solution then would be to remove that invalid column from the configuration.
Not sure why we are still getting the invalid column issue.

Cannot display more than 16 significant digit numbers from Oracle

The WebI Report cannot display more than 16 significant digit numbers from an Oracle data type field.
This occurs for both an ODBC and native driver connection to Oracle.
The data is defined by Number Data Type in Oracle, and view correctly in Universe, but display incorrectly in WebI report which created by InfoView.
I know BOE XIR2 has this behavior, but it seems that XI3.0 and XI3.1 also have this problem.
If this behavior in XI3.0 and XI3.1 perform by design? or it's a bug? and Why?
Thanks!

Hi Sarah,
Precision limitation of a Web Intelligence filter constant :
In an Oracle database, a Number field type can store up to 38 digits. When creating a Web Intelligence report in the Java Panel, a condition is specified for this field (that is represented in the universe as a number), and a constant number is entered for its value, only up to 15 digits of precision are retained.
For example, if 1234567890123456789 is entered, the value becomes 1234567890123460000.
Or, if you have a column in database which has a number like 123.123456789012345678 it will display only 123.123456789012.
Cause
The reason for this limitation is that Java Panel represents a number internally as a Double field type with only 15 digits precision. This is by design.
Resolution
The only workaround is to change the field type to a Character field; however, doing so means losing the ability to perform calculations and/or sorting on the field.
This issue has been raised as an Enhancement Request and given Track ID # ADAPT00908702.
Regards,
Deepti Bajpai

I have photos that are rotated within a photo stream created from a project even though the photo displays properly within the project. How can I get the photos to have the proper rotation within the photo stream?

I have a photo stream that was created from a subset of photo from a rather large Aperature project. Some of the photos show up rotated within the photo stream but are not rotated within the project. Why is this happening and how do I fix the rotation within the photo stream? I do have the latest version of Aperature and have all of the necessary updates applied to my devices used to view the photo stream. The photos do show up rotated within the photo stream segment of Aperature, so I am sure it is not an issue with the output device (iPad and Apple TV). I do know that I cannot edit photos within a photo stream, but no amount of editing within the project allows the photos to be properly rotated within the photo stream. All help would be greatly appreciated.

That will work, but it is the long way 'round.
As Frank noted, Book Albums are just specialized Albums. Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image. You can put your Albums anywhere (in a Folder called "Books" for example). You can put Images from anywhere in your Library in any Album.
The easy way 'round:
- Make a new Book Album
- Select Images you may want to put in your Book. Flag them.
- Select some more. Flag them.
- Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
- Repeat as needed, or just drag-and-drop directly into the Book Album.
Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key. This _does not remove the Image from the Project that contains it, or from the Library.
Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication. The Book Album contains the superset of Images with which you populate the Book itself. The Book Album also holds the Book.
A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
The User Manual is helpful. Here is
the chapter on making Books.
From that chapter, here is
the section detailing how to create and populate a Book Album.

I cannot edit text in a PDF created from scanning

I am using Adobe XI, and I have created a PDF by scanning a document.
When I do click on a paragraph to edit text, all the page appears selected, it seems to be an image. At that moment a message pops up saying: this page has not editable text or digitalized content. The editing tools are disabled, so I cannot edit text.
If I do export a page to Excel or Word, I can edit text there, although there are some kind of data that is not converted properly (even when I have executed OCR).
I have edited preferences, but I am not sure if I did it correctly.
Thanks

I am using Acrobat XI Pro on PC.
Of course, I have done all the steps you mention, but I wanted someone to confirm me if these setting values are correct in order to obtain the best results. I repeat the paragraph of my previous discussion that I want to clarify, just in case some of you can help me, mainly about optimization
I digitalized the document from the scanner. This scanner is installed in the net, so I personalized the settings in Acrobat and I chose memory mode instead of native mode.
Mode color: black on white
Resolution: 600 ppp
As you say in your mail, I understand I should choose ClearScan OCR not searchable just at this moment.
Well, and what about the options of optimization?, JBIG2 (without lost)?, 4 CCITT?
And filters?, I have: activated, low, activated, medium
Are these values congruous or compatible?
Thank you
De: Phillip Jones [email protected]
Enviado el: martes, 27 de noviembre de 2012 18:24
Para: Suárez Suárez, Manuela
Asunto: I cannot edit text in a PDF created from scanning
Re: I cannot edit text in a PDF created from scanning
created by Phillip Jones<http://forums.adobe.com/people/PhillipMJones> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4877588#4877588

I have Acrobat 9.5 and when I try to create pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
Always visit the scanner vendor's site and download - install the latest greatest software.
n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
As well the Acrobat 9.x product family is not compatible with contemporary OSs.
Be well...

Error Displaying Portlet Preview created from Content Server templates

I created portlet from content server announcement portlet template.Whet put on the page this portlet shows the following error message:
Error Displaying Portlet Preview.Error Getting Content from Portlet.
Same error with portlet created from the news template.

If the link exists in TOA01, why is the dosumnet not visible ? When i use the Function Module ARCHIVOBJECT_DISPLAY, i get the error -
Error when opening document with HTML control:DP_ERROR_GENERAL
Can someone please let me know what are we doing wrong ??

Cannot display the Crystal Report from BW..very Urgent

Hello Friends,
We are executing the Crystal report XI report from BW 3.50 but cannot displaying andgiving the error messgae as follows....
Service cannot be Reached
What has happened?
URL http://sapprodbw.company.com:8112/sap/bw/sap/bw/ce_url call was terminated because the corresponding service is not available.
Note
The termination occurred in system I12 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapprodbw_I12_12-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
I'm getting the above error could plz help me .. its very urgent task for us..
Thanks in advance for your valuable time...
Sreedhar G.

Hi Dinesh,
I started all the services and i checked the Test service of ICF its giving the same above error and service cannot be rezched...BASIS is also workin on the same issue but getting ...
Any help...
Message was edited by: sreedhar Gunda

I cannot display image (read from oracle BLOB field) on browser?

I cannot display image (read from oracle BLOB field) on browser?
Following is my code, someone can give me an advise?
content.htm:
<html>
<h1>this is a test .</h1>
<hr>
<img src="showcontent.jsp">
</html>showcontent.jsp:
<%@ page import="com.stsc.util.*" %>
<%@ include file="/html/base.jsp" %>
<%
 STDataSet data = new STDataSet();
//get blob field from database
 String sql = "SELECT NR FROM ZWTAB WHERE BZH='liqf004' AND ZJH='001'";
 //get the result from database
 ResultSet rs = data.getResult(sql,dbBase);
 if (rs!=null && rs.next()) {
 Blob myBlob = rs.getBlob("NR");
 response.setContentType("image/jpeg");//
 byte[] ba = myBlob.getBytes(1, (int)myBlob.length());
 response.getOutputStream().write(ba);
 response.getOutputStream().flush();
 // close your result set, statement
 data.close();
%>

Don't use jsp for that, use servlet. because the jsp engine will send a blank lines to outPutStream corresponding to <%@ ...> tags and other contents included in your /html/base.jsp file before sending the image. The result will not be treated as a valid image by the browser.
To test this, type directly showcontent.jsp on your browser, and view it source.
regards

Can't reinstall osx lion from internet, and display a message"cannot find installation information ,please contact applecare, what should i do?

hello
I can't reinstall osx lion from internet, and display a message"cannot find installation information ,please contact applecare, what should i do?
thanks

I'm no Lion expert, but I believe you can boot from the Recovery partition by pressing the Command and R keys on startup, then reinstall.

Cannot Display MSG (MS Outlook) from Documentum in SAP

Hello Everyone,
We have linked SAP with Documentum to be able to retrieve documents stored in the content server. We made all the setting required in OAC0, OAC2, OAC3.
We set everything to attach objects of types PDF, DOC, XLS and MSG.
We can attach all the objects without problems and they are stored in the content server.
We display PDF, DOC, XLS in SAP without problmes but we cannot display MSG files. It´s like the extension .msg of the object is missing when we try to display in SAP. In the Documentum content server is stored ok whit its extension.
I would greatly appreciate your help if you can help me in resolving this issue.
Thanks and Regards,
Luis.

We also had the same issue. It was working prior, and suddenly we can't view .msg file (in CMOD archived storage) in portal as it no longer recognize mime type for this. This must be a new patch from outlook last week. We ended up implementing config change suggested in note 1840170, and add this mime entry in local registry. As per IBM note http://www-01.ibm.com/support/docview.wss?uid=swg21610741, it looks like there's no other choice but to do it.
We plan to push this entry to all users' computers soon.
Regards.

Video with subtitle from DVDSP export to quicktime?

Need to know how can I export video with subtitle (specific clip) from DVDSP to quicktime for website? I use FCP to edit the video but not have subtitle on FCP. I want to see video with subtitle as open caption on web. How?

In DVDSP, turn on the Force Subtitles button to embed them into the video.
Burn a Disk Image instead of a DVD and rip to your format of choice in MPEG Streamclip.
You can go back and uncheck the Force button if you want the final DVD to have the option of playing without subtitles should the viewer choose to do so.

Cannot create profile for IMG display only access - Timeout

Hello all,
I have created a role for IMG display only role. It has hundreds of Org values and fields. I have made ACTVT=03 in change Authorization
Everything is fine except when i click to create profile, the system does starts processing but its taking hell of a time. It times out since the system has time out after 9000s. Anyway 2 hrs for creating profile..phew!
Is there a way I can create profile?
Alternatively, Is there a simpler way to create role for IMG display only access?

How are you building your role? It shouldn't be timing out - might be worth having a chat with your basis team.
Alternatively, if you can save the role (but not generate it) you might be able to generate it in the background via transaction SUPC. It's better to understand why you cany create it first though.

Cannot display table's data from an Excel File

Hi everyone,
I have uploaded my excel table to ODI but now i got an error message on a window that whenever I try to see the info and it says more o less the following:
Oracle Data Integrator Error
Cannot display table's data.
java.sql.SOLException: [Microsoft][ODBC Excel Driver) The Microsoft Jet database engine cannot open the tile '(unknow)', It is already opened exclusively by another user, or you need permission to view its data.
Has any one faced this issue before?
I assume that it is something with the ODBC, but as far as I know it was all right.
I would really appreacite any ideas on how to solve this issue.
Best regards.
J

Something is reading your file, have you got it open in Excel?
I've had similar issues reading Excel via ODBC with OBIEE - once a process opens it you might find you need to kill whatever it was and restart it.
So its either you or the ODI Agent / Console , try restarting it if its not you.

Popup from ALV for displaying full text = problems!!!

Dear all,
I created an ALV to display data. In this ALV, I have a text column, which just show FIRST 30 characters of the original text.
Now I want to double click on that field, and it will pop up a small window to show full text (the original text, unknown length).
I made lots of references and I decided to use FM POPUP_WITH_TABLE because of some reasons:
a) the original text is retrieved from another FM READ_TEXT. After the call of READ_TEXT, the text will be stored into an internal table. Then, it can be passed to POPUP_WITH_TABLE without more modification.
b) POPUP_WITH_TABLE can show the text more meaningfully. I mean, if the length of the text is greater than the length of the popup window, it automatically break the line and displays the rest in the next line. ( FM POPUP_TO_INFORM does NOT do that.)
However, I've faced some PROBLEMS with FM POPUP_WITH_TABLE
1) The popup window has 2 button OK and Cancel. Is there any way just to display Cancel button?
2) If I click on Cancel or OK without choose any line on the popup window => It will raise an exception, called BREAK_OFF. In this case
If the clicked button is CANCEL => it will close the popup
If the clicked button is OK => nothing happens. And I must click on CANCEL to close the popup.
I want to close the popup windown without raising any exceptions. How can I ?
3) When I enter many complex selection criteria on Selection Screen to limit the result, displaying ALV is good. But when I click on the text field to popup => the report cannot be manipulated. I have to kill the session in SM04.
What's wrong? (because for single selection criteria, it works well.)
Every body has any suggestions?
Thank you in advance

I solved it. I just use another list for pop-up event.
Although it worked well now, I thought it was not a good solution.
Thank you all of you.
Best regards.

Subtitle created from DVDSP cannot display in VLC

Similar Messages

Maybe you are looking for