Subtitled video - Problem while burning

Hi there!
I have a .mov video and I created a subtitled version of this using Submerge. When I drag the video on my iDVD project, it show perfectly on preview; although on the burnt DVD the whole subtitled area shows a black background. The upper side is ok, and the subtitles work, but the lower third of the image constantly shows the black background.
Did anybody have this Submerge/iDVD problem? Is there a proper Submerge setting to use so that iDVD doesn't get any problem?
Thanks a lot in advance
Best
do80s

Hi,
Sometimes when playing flash videos the player can stall. I occasionally experience this as well.
Nearly every single time it will eventually catch up to the audio if you give it a moment or two. Also try tapping escape and then when it responds it will exit full screen. Nothing to really solve this except using a flash alternative, as flash is widely known to be less than optimized for Mac OS X. Also make sure you have quit other programs you aren't using to free up some extra memory.
-SM

Similar Messages

Problems while burning the DVD

I have worked a little with Encore 1.5.1. This is my first attempt with the upgrade to 2.0. I love the features but have run into a number of problems when I actually attempt to build the DVD. On three occasions the burn has encountered errors during the build/write process. Messages like "Preparing project for Build failed" and "Stream type invalid" have occurred. Once the build seemed to work but the resulting DVD does not play on either a DVD player or on my PC.
I have no build errors (by the way, I like the Check Project functionality) and I can preview the project with out a problem.
A potentially related issue... Encore runs very very slow on my system. I have a P4 with 1 Gig memory. The old version of Encore ran fine. Premiere has good performance.
Any suggestions on how to fix the burn problem?

Andrew,
As Ruud states, PP does not recognize DL DVDs, while Encore does. However, with 1.5 hours of Video, you should not need DL. With good transcoding specs., it will easily fit on a DVD-5 (single-layer).
I'll bet that you are looking at the size of your Exported file (what format is it - DV-AVI?) and figuring that THAT will not fit on a 4.7GB DVD-5. What you have to allow for is that either PP, or Encore will "transcode" the file to MPG-2 for the DVD, and it will compress that file. If you have already Exported to MPG-2, you need to look at your Export settings, as they are likely too high. They may also be too high, for any DVD player to actually play the DVD.
A very nice feature of Encore is that if you feed it a nice DV-AVI file from PP, it will automatically choose the correct settings to fit the file onto a DVD-5 (provided that you have set DVD-5 in your Disc tab). If you wish to do all of the math yourself, and not rely on Encore to do it for you, then you'll need to study up on "bit budgeting." This forum would be a great place to start, with a "search." However, you will likely need to spend a great deal of time learning this, plus you'll need a few "tools," most of which are freeware, though not 100% intuitive.
The next stop should be Jeff Bellune's "Focal Easy Guide to Encore2." Even if you have CS3, which includes Encore3, Jeff covers bit budgeting and that part will be the same. Some buttons and switches will likely have changed between the two versions, but the principles will be the same.
Still, most of us rely on Encore's automatic transcode settings, until we have a really involved project with specific Assets.
Considering the age of the original thread, and how far down it is on the forum, I'd suggest that you start a new thread. First, I'd set it up a bit differently, than the one that you tagged onto this thread. State what your Assets are, which programs you are using and which programs you have at your disposal, or plan on acquiring to complete your Project. Next, a bit of info on your system, might help others, should they have to "trouble shoot" your Project. It would look a bit like this:
Five hours of DV tape, Captured into Premiere Pro X and edited to a 1.5 hour Project with stereo Audio from the original tape.
Exported from PP to DV-AVI (file size) as elemental streams DV-AVI Video and PCM WAV Audio.
Imported to EncoreX as a Timeline. Imported 3 Menus from Library(details).
Desired medium for Export = DVD-5 to be played on both computers and stand-alone set-top players.
System: Intel Core2 Duo 2.6GHz, OS=XP-Pro SP2, nVidia 8800 GTX, 4x 250GB SATA II HDDs, Adobe PP2, Encore2, etc.
This way, we'll know what you have, what you want, what gear you're using to get there, and what you've done so far.
Good luck,
Hunt

Problem while burning with my eMac

Hi,
I've got my Emac for a little more than one year and now I can't burn CD anymore
I don't understand beacause I burned less 15 CD. It's very cheap
It's strange, because my combo can read CD or DVD but not burning.
And the Hardware Test didn't found any errors :-/
Informations about my combo are:
Fabricant:     HL-DT-ST
Modèle:     HL-DT-ST RW/DVD GCC-4481B
Révision:     2.05
Numéro de série:
Type de disque:     CD-RW/DVD-ROM
Gravure du disque:     Géré/Livré par Apple
Support amovible:     Oui
Disque amovible:     Non
Protocole:     ATAPI
Numéro de lunité:     0
Type de socket:     Interne
I read some thing about firmware but where can I find it ? Apple don't provide it and didn't say anything about this problem... It is not fun

I too am having trouble with burning...It tries to burn then I get an error, communication to the drive failed, so it won't burn and disk can no longer be used.
What could be causing this. I'm obviously not the only one with burning problems, but I don't like that I can't burn, therefore cannot make backups of my files. This is bad.
Please can anyone help?

Video changes while burning too dvd

Hi im burning a DVD and when i preview the dvd its ok, but after i burn it and play it on my ps3 or on any other dvd player its a bit zoomed in, i think. the top of the image is lower than its suposed too be. when i try too play the DVD in my mac its ok but not on any other devices have tryed to look it up on the internett but cant find anything :S
thnx
Adrian
ps. sorry my bad english

More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/

I have problem while I'm watching video on my iPhone 4s its becoming dull.

I am facing a video problem while I'm watching video on my iPhone 4s its become dull and video seems foggy. how i can fix this problem?

+1 for TJ! That was brilliant!
As there are pretty much infinite ways to say something, we need more details. I have no idea what you mean by dull and foggy, could you kindly take a picture of what you are seeing as dull and foggy and post it in your the next reply?
If your phone has been exposed to water, there's your problem.

My computer shuts down with an "unrepairable hardware problem" when burning a DVD with Premier Elements 10

What causes my computer to shut down with a hardware problem while burning a video to DVD from Premier Elements 10?

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Battery problem while recording videos.

I got my ipod touch 5 1 month ago. I got a problem while recording videos. The battery was around 40 percent, but after I recorded a video for about 1-2 minutes. The 20% was popup, then it turned off automatically. While I turn on it, the battery will be about 30 percent. It happened several times. Is this normal?
Does anyone have the same problem?
Thanks!

Hi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

I'm having a problem while recording a video

'm having a problem while recording a video
When the memory card and the highest quality ..
Stop and is working
I recorded video works normally on the memory card.

Nokia C5-00 5MP

I have mic problem while making video and while on loudspeaker its reduce the mic volume alot.

i have mic problem while making video and while on loudspeaker its reduce the mic volume alot. plz help me out

iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

An error occurred while burning the disc.

I tried to burn some stuff onto a DVD today with my PowerBook. Here's the info on the burner:
MATSHITA DVD-R UJ-845E:
Manufacturer: MATSHITA
Model: MATSHITA DVD-R UJ-845E
Revision: DMP2
Serial Number:
Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
I bought some DVD's on sale at Radio Shack, and when I tried to burn a movie and a few photos onto a disc, the progress bar showed it starting to burn, then it stopped and I got this message:
"An error occurred while burning the disc. This disc cannot be used."
A little research here at the Apple forum brought me to this site:
http://www.digitalfaq.com/media/dvdmedia.htm
And after downloading a little program called DVD Media Inspector, I was able to classify the DVD's I had bought as:
"4TH CLASS MEDIA:
Pathetic garbage media, landfill material, about 0-50% success rate...."
OK, off to Mega Lo Mart, where I bought some nice, expensive Maxell DVD's.
Media Inspector doesn't see my fancy new DVD's. When I try to burn stuff using the Finder, I get the same result as before.
Getting desperate at that point, I located and downloaded updated firmware for my model of Matshita superdrive. I'm not sure what firmware is, and there was a free range one and a standard one, so I went for the standard one. There were dire warnings in the readme file about "flashing" a superdrive being on the same risk level as open heart surgery. I flashed my superdrive. (You can say that here, and it's not dirty.)
I also tried burning using iDVD, and after much preparation, it started to burn, then spit out the DVD. I tried three of the landfill DVD's and two of the Maxell ones. I'm out of things to try. Any ideas?
I have never tried burning DVD's before. Am I doing something wrong?

I tried again using iDVD's One-Step DVD making feature. It will let you make a one step from a movie file, and I had a .dv version of the movie I want to burn.
It encoded video for a while, encoded audio for a little while, then started to burn. The superdrive made some noises, then the DVD was ejected and I got an error message saying:
"Burning Finished
Errors were found during the burning process"
I hit OK (though it really wasn't OK) and got another error message box. This one said:
"Multiplexer error
(some message about multiplexing problem)"
The message didn't make sense to me, and I was unable to remember it. What's a multiplexer? I would have guessed an avid movie-goer, but somehow I think that is not it.

MY DVD drive does not read all DVDs and also does not burn CDS properly. Often while burning a CD i am prompted that " The machine is unable to caliberate teh required Lazer Power"

Hi i am having a i MAC which has mountain lion OS 10.8.2. I am facing teh followwing issues with my disk drive
1. I am unable to read all DVDS in it some DVDS work while others do not
2. I am able to read all CD's, but while burning a CD i am prompted with the following message
" Unable to caliberate lazer power"
3. Kindly assit me in solving this problem
regards

Hi
Four thoughts
• Brand and type of DVD/CD Media
• Burn Speed ?
• Ever used a Cleaning DVD ?
• Free space on Main Start-Up Hard Disk ?
Brand and type of DVD/CD Media: MATTERS
- Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
I only use Verbatim
- DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
I only use DVD-R
Burn Speed (in iDVD or alike): Matters
• Best or Max - is not best
I set it down to x2 or x4 Max
Ever used a Cleaning DVD ?
I use one WITHOUT Liquid but with brushes from time to time
Free space on Main Start-Up Hard Disk ?
- Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
Yours Bengt W

Crash while burning to blue ray

While burning a blue ray disc it's getting all the way through the media encodeing but then crashes and does not finish burning the disc. For the heck of it I put the disc in my blue ray player and it will not recocnize the disc.
Also when I burn a standard DVD it will get to 96% complete and then I get an error that says that the target device is not compatible, but when I put the disc in a DVD player is plays just fine. Is there a problem here or should I just live with it?

For the moment here's some more information that may help. I had a real computer guru work on this computer, it's better then it was but I really feel that it just is not up to the task for video editing.
Hewlett-Packard Company
model; a6330f
processor; AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ 2.80 GHz
memory (RAM); 3.00 GB
system type 32-bit Operation System
And a great big sticker on the side from Hewlett Packard that says "The perfect computer to edit you pictures, video and music". Yeah right... From the start I could not get this computer to edit any video (it came with Microsoft Movie Maker), it would lock up every one or two clicks of the mouse. That's why bought the Adobe Premiere Elements 8 program, but it locked up too. At least now that my friend worked on it I can do some editing before it locks up, and now I can burn a standard DVD (it wouldn't do that before either, the verdict? HP installed pile of junk for a DVD drive so I updated it to Blue ray since I had to replace it). Now it will barely burn a DVD (see what I said about it above) and I don't have a prayer of getting a blue ray disk to burn. I tried it again today, it encodes all of the menues just fine and most of the media too. Right at the end the program just crashes and askes me to send in a crash report. Very frustrateing.
I really think that the biggest problem is that this computer just does not have enough processor, but I'm not very good with computers so I really don't know.
I need to read your article...

Errors while burning?

I just put together a pretty simple, one-track video on iDVD and while it was burning, I got a message saying something like "errors while burning" - I did not save the exact message, but I'm wondering what the cause for this might be. I actually closed out of the DVD project, took it to the trash, and recreated a new DVD project out of the iMovie project. I thught this would fix the problem, but there were still errors while burning the second time. I tried to play the DVD and the system would not read the DVD, there was no picture at all. Any suggestions? (I have more then 25GB of free space on my hard drive - about 35 I believe)

You're welcome. Here's a bit of background:
a) I use MacJanitor to trigger the Mac's maintenance scripts (download it from VersionTracker.com), and then use Apple's Disk Utility (look in Applications-Utilities) to repair permissions on your main hard drive. Your Mac would do maintenance tasks by itself if it was turned on continuously, but MacJanitor lets you run daily, weekly, and monthly maintenance tasks (I run it before I do something big, or when my Mac seems slow or goofy). Disk Utility can do first aid on hard disks, and on your main hard drive (boot drive), it can Repair Permissions (It's important that permissions are correct).
b) Creating an image file is often recommended in these forums because it gives you more control over the burning process, and it creates a virtual DVD that reliably can be tested. In iDVD, choose Save As Disc Image and iDVD will go through the encoding and other processes, except the DVD is created on your Desktop. You can use Apple's DVD Player to play the virtual DVD and make sure it works like you want. When you're satisfied, Disk Utility can be used to copy the virtual DVD to an actual disk. To do this, choose the image file in DU and click Burn (you'll have some options for burn speed -- I'd choose something slow to reduce burning errors -- perhaps 1x or 2x but wouldn't go faster than half the rated speed of the burner).
Shout if you need clarification.
John

Subtitled video - Problem while burning

Similar Messages

Maybe you are looking for