SUBTITLES CUT OFF AND OUT OF BOUNDING TEXT BOX

SUBTITLES CUT OFF AND OUT OF BOUNDING TEXT BOX
by Ben Martin on Jun 24, 2008 at 9:57:39 am
I use Encore version 2.0 and have problem with subtitles on a 30 minutes video. I have not imported these subtitles, but made them, one clip at the time. The first 10 minutes is fine, each subtitle is within a bounding box (the bounding box was stretched up to the first inner rectangle of the Safe Area). They can be seen fine on the timeline and on the DVD.
However from one particular subtitle onwards, all the subtitles clips seem to suffer from the same problem. When I play them on the timeline the long subtitles are cut off at the right end. When I click on them within the monitor, I see that they are not within a normal bounding box. Instead the text is sort of "embedded" within a structure of white squares (similar to a bounding box), but any attempt to strecth that "structure" by pulling a square with a text tool, only deform and extend the text itself.
I have tried to create a blank subtitle clip after the last "good" one, using the Add subtitle button on the monitor, but it won't create an empty bounding box within which I could type or paste the text. It works if I try to create an empty clip in the "good" area of the time line (the first 10 minutes), but not before or after that first bad clip I mentioned above. It is as if there was something bad on the timeline and any attempt to create a proper bounding box clip is impossible.
Is there a setting that I can change? or is it a bug in the programme?
Any help would be appreciated. Thanks.
Ben Martin
Payday

In order to aviod stretching the existing text, you must use text tool to resize the boundry box.

Similar Messages

  • Text in fillable text form gets cut off and appears only in the lower half of the text form?

    I'm trying to create a text-fillable PDF form. However, when I add a text form, the text I test in it gets cut off and appears only in the lower half of the text form by default (see 2nd photo below). How do I correct this and make the text take up ALL the space in the form like the 1st photo?

    Have you set the text field properties options to multiline? Is so, please attach a screen shot of that dialog box so we can see how it is set.

  • When I switched computers my songs now cut off and don't play out.  How can I get my songs back to play fully that I purchased from ITunes over the past years?

    When I switched computers my songs now cut off and don't play out.  How can I get my songs back to play fully that I purchased from ITunes over the past years?

    Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

  • HP deskjet printing issue - alternate line cut off and blocks

    Hi guys recently bought a deskjet 3050 and it started printing fine, when i had to print out a large document (roughly about 30 pages) it started to cut out sections of text and replacing them with black blocks.
    now when printing it prints the first line fine then the second line is half missing and some words are replaced with black blocks. then the next line is fine, the next is cut off and blocks again and so it continues.
    it only does this with black ink and not colours.
    anyone know a solution?

    It sounds like the black cartridge has failed electrically.  Try printing a diagnostic page as shown in Solution 6 of the page here.  Does this print properly?  I suspect the black nozzle pattern in the upper right will be corrupted.  You might try removing the cartrdige and cleaning the electrical contacts but I suspect the cartridge will need to be replaced.  You can check the cartrdige warranty as shown here assuming it is an original HP cartridge.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Having a problem with iphone 4S. Phone calls are getting dropped and cutting in and out.

    I seem to have very little or no service at all recently.
    All my calls are cutting in and out or hanging up in the middle of a conversation. I have to stand in the corner or my kitchen to get a clear call or get at least 2 bars.
    I called Verizon yesterday and tried a few things they suggested but nothing worked.
    I dont have another phone to call them back on since they suggest we call from a different phone until the late evening. Someone was supposed to call my back and never did.
    Not sure on what else to do.
    I am extremely frustrated and annoyed that I cant even really use my phone.
    HELP

    If the on/off switch does not work, that is a hardware problem. The other problems may be related to a hardware problem or faulure as well.
    Make an appointment at an Apple store if there is one nearby to confirm.

  • Why do burned in subtitles cut off on bottom of screen?

    I'm watching a Foreign film through NetFlix. The subtitles are burned into the film already and are part of the film. An example is Tous Les Matins du Monde. These burned in subtitles are being cut off on the bottom of the screen. I've tried all the available aspect ratios on my TV and there do not appear to be any setting on the Apple TV Ver.2 to adjust the aspect. I've tried the Apple TV on two other flat screens all of different makes and the same problem exists - burned in subtitles cut off.
    Does anyone have any ideas on how to resolve this?
    Thanks in advance.

    Same problem here. Watching mostly foreign or older films. Displayed with a black frame around the content, and everything appears squished. Top frame is cropped.
    Any help would be appreciated.

  • Sound cuts in and out

    I am running Mainstage 3.0.3 on my MacBook Pro - 13" (early 2011), OS X 10.9.1, 2.3 GHz Intel Core i5 processor, 8GB RAM and running on a Samsung 500GB SSD drive. I am plugging in a bass through an M-Audio USB Fast Track.
    Using this right now simply to play along with tracks on iTunes (for practice). Used to use Garageband for this, but then I got Mainstage. Mainstage 3 was running fine when I first bought and downloaded it. Not sure what the problem is now, but when I open it and create a new concert (bass-rig) then turn the master volume up, the slider movement is choppy and the sound/signal cuts in and out (more out than in). The only time I can get sound to consistantly come out is if I click on a menu option, like File or Edit or Action, etc... if I click off the menu, the sound cuts back out and I get nothing.
    Sound works perfectly fine through Garageband with the same setup.

    That's the model of your processor in your HP P6350z. Do you have a discrete (separate) audio card in your PC?  When you purchased your PC did you add a separate audio card?  If not, then go to www.realtek.com and download and install the latest audio drive for the Realtek ALC888S.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Airport Base Cutting in and Out

    My Airport base station has started cutting in and out and restarting it only sometimes works. Once returning to detectable signal, it may work for seconds, minutes or hours.
    For four years, we have had a flat-screen iMac, an eMac and a network printer working without a hitch. Recently, We added a MacBook Pro, also without a glitch. Suddenly, in the past three days, the signal has frequently become undetectable, even at the iMac only 2 feet away.
    Clearly, it does return to use, as I am using it now. Leaving it in use (e.g streaming a radio over internet) seems to keep it active, but I am not sure for how long.
    I've tried it all: turn Airport on and off; unplug and re-start base station; unplug and re-start DSL modem; repair permissions; name it.
    The unit seems to have spontaneous regeneration as it seems to work after sitting unused for a while (though I have to log back in, which I have not had to do in the past).
    All three computers are running 10.4.5 and all have the latest Airport updates.
    Is there something else to try? Do I just go for a new base station? Could it be something outside--DSL, electronic interference, etc? (No new electronics in the house.)
    Airport Base Station (not Extreme--Snow?)   Mac OS X (10.4.5)  

    yes, am experiencing a similar problem.
    brand new iMAC intel, with firmware upgraded. 10.4.6
    when I try to do a software upgrade, I can begin the download. it goes for about 2 mb or so, and then cuts out.
    no signal, download is stopped...but a few seconds later the airport signal is back on at full strength.
    am going to try the suggestion of channel change
    georg

  • Siri keeps cutting in and out when I'm using my iPad3 and I don't even use Siri. This Is driving me mad. Can someone find it in their heart to help me.thanks,Michael.

    SIri keeps cutting in and out when I'm using my iPad 3 and it's driving me mad.
    i Don't even use Siri and know I can turn it off but don't want to.
    could someone please find it in their heart to try and help me with this issue.
    kind regards
    michael.

    If you have your iPad connected to the charger it could be the new "Hey Siri" feature that allows you to use Siri without pressing the home button. Do you have a radio on or are people talking ? Go to settings> general> Siri> Allow"Hey Siri"> off.

  • Airfoil cuts in and out due to sleep (I think)

    I use Airfoil to connect to an Airport Express and play music. It constantly cuts in and out whenever another application is in use, when the computer sleeps or the display turns off.
    Can I (and if so, where) adjust these settings to allow it to continue to play until I disconnect it? (MacBook Pro w/OS Mavericks)
    Thanks in advance -
    K

    Found this on Rogue Amoeba's page:
    "In addition to the above, the new “App Nap” function in Mavericks can cause issues with audio transmission when Airfoil is in the background. We’re working on this, but for the moment, we recommend disabling App Nap on Airfoil. This should only be needed temporarily."

  • MacBook sound cuts in and out & getting a beach ball a lot.

    When I try to play a video the sound either cuts in and out or just stays off. You can barely hear a small popping noise through the speakers. The chisel also lags very band making it impossible to watch, it does not matter if the video is online or on the computer itself.  I also get the beach all allot even sometimes just using Word. Is there any way to fix this without wiping the hard drive?
    Here is a video if this will help
    http://www.youtube.com/watch?v=V3NYtPt0vIc&feature=youtube_gdata_player

    Hi I have experienced this problem also, especially when listening to mp3's. At first I thought the quality of mp3 was the cause (as in different encoding quality) but it seemed to happen when playing DVD as well. I don't think a reboot will solve the problem for good, as it happens quite randomly. I have a sneaking suspicion that the internal speakers may be at fault. doesn't hurt to get apple to check it out while under warranty.
    15"PBG41.5ghzAL   Mac OS X (10.4.5)   1Gb RAM 30gb free space

  • I pod nano bluetooth cuts in and out in car speakers

    My i pod nano bluetooth cuts in and out from my car speakers. Everything else seems to work fine. Ideas?

    Something is interfering with the signal. Try turning any devices with WiFi that are with you off.

  • Speakers cut in and out

    I have a 03 pontiac sunfire.  Ever since I bought this vehicle a year ago all of the speakers will cut in and out.  The rear speakers will only work every now and then.  None of the speakers sound like they are blown.  Also the head unit will turn off if the parking brake is applied.  Any ideas?

    sounds like bad speakers, factory amplifier, or bad installation.  get your car into your local geek squad to have it fixed and working the way it should be working.  $20 per 1/4 hour or $80 per hour is the normal troubleshooting for a vehicle.  thanks for posting and good luck!
    I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
    Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
    ***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

  • IPod abrubtly cuts off and only comes back on when you unlock the hold button. why and how can i fix this?

    I listen to my iPod Classic at work and it kept cutting off today out of nowhere and this hasn't happened before. I have it in my pocket so I have the HOLD button in the lock position so the wheel won't get pressed while in my pocket. I figured it died on me but I had just charged it last night so I took it out and unlocked the HOLD button. Well, the music immediately came back on. It happened a few more times and i figured maybe it was the song or something so I changed albums and it kept happening. Every time it would cut off, I'd unlock the HOLD button and it'd come back on every time, almost like it was paused or something. Has anyone experienced this? if so, how do I fix it? I really don't want to buy a new iPod since I have little money because of school, bills, and photography/film equipment. Help? thanks.

    I'm having a hard time finding an answer to this too.  This is what is going on.  Sometimes the iPod (iPod Classic 160GB) does not "like" the songs I've downloaded from cds.  Sometimes it does.  I think it always plays whatever songs I've purchased on iTunes though.  The other day I synced it to add two new cds and somehow the iPod was wiped clean--no songs, no pictures, nothing. I did a reset and the songs came back but now these problems: 
    1. The song will play for a few seconds then it either skips to the next song.
    2. The song won't play, just skips to the next song.
    3. Everything just stops, the iPod is still 'on' but won't play anything.
    4. Right now it's playing an Aimee Mann album that I downloaded but it wouldn't play the Joni Mitchell album just before.  Is the iPod making a comment on my taste in music? 
    Flipping the lock back and forth helps sometimes, but not always.
    I bought this device less than two years ago; I really hope it's not permanently messed up. Should I just go to the Apple Store (please I beg of you, don't make me!) and throw myself at their mercy?
    Help!! My iPod is the only thing that gets me through the day in this office.

  • AirPlay Audio Cuts in and Out

    I have had major issues in the past six months with the audio from my AirPlay where there used to be none. For a long while I used an elaborate setup from my 2nd gen AppleTV, to a optical audio out to a quarter inch converter to an AudioEngine wireless dongle to my receiver with flawless results between 2013 and late 2014. When problems started occuring I naturally figured it was the wi-fi network, I did some serious reconfiguring to get as strong and clean of a wi-fi signal as possible, still had the issues. I finally decided to simplify the whole setup to an AirPlay compatible Denon AVR-x1000 stereo that hardwires to my wireless router. All was good for a week, now its worse than ever, even resetting the internet and the router will not seem to get the AirPlay from cutting in and out. I have an iPad, an iPhone 5 and a Macbook Pro, and an AppleTV all connecting to the receiver. All have the same cut in and out problem that existed before the receiver and after. It seems every update makes things less stable not more. Is there someone who can help walk me through a fix or just tell me AirPlay no longer works so I can stop trying?
    Please help!!!
    Here is my setup -
    Macbook Pro 15-inch, Mid 2012 - 2.6 GHz Intel Core i7, 8GB RAM Running OS X Yosemite 10.10.3 connected by Wi-Fi
    Denon AVR-X1000 AirPlay enable receiver connected directly to router via ethernet
    Netgear Dualband Wireless-N Router WNDR3700 - 2.4GHZ Channel has a 92% Signal and the 5Ghz has 85%
    Internet Connection is fast and consistent 72MBps Down 10 Up
    2nd Gen AppleTV connected via Wi-Fi
    iPhone 5 iOS 8.3
    2nd Gen iPad running iOS 8.2
    I have shut off bluetooth on anything that has it to avoid interference. The video of the appleTV works just fine and the Airplay Icon is consistently available, this is an AUDIO issue.
    ***There is another 2nd Gen Apple TV in a separate room (weaker signals all around) connected to the same network that works flawlessly streaming audio and video from any device.***

    Hello Mikeh42,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with AirPlay please follow the steps listed in the article linked to below.
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    Take care,
    Alex H.

Maybe you are looking for