Subtitles wont work on the secon layer of the dual layer disc

even with scripts the subtitles goes automatic to stream 1 on the data (videos) in the second layer.
the gprm info some how gets lost in the break point.
please help
Dub division

How is the project set up?
Is it one long track that crosses the layer break?
Are the scripts attached properly?
What are the scripts?
Take a look here for some info to force subtitles
http://discussions.apple.com/message.jspa?messageID=2069686#2069686
and an example project
http://www.geocities.com/mypix013/Subtitles.zip
Some general info also of forcing streams
http://discussions.apple.com/thread.jspa?messageID=2243316&#2243316

Similar Messages

Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My ipod touch 4th generation's home button and lockscreen work perfectly but the screen is unresponsive and wont work whats the problem?

My ipod touch 4th generation's home button and lockscreen work perfectly but the screen is unresponsive and wont work whats the problem?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I dropped my ipod in a toliet and now it wont work off the charger, help? PLEASE

i dropped my ipod gen 2 in the toilet a few years ago and i thought it was totally gone. my dad told me 2 keep it so we could fix it but we completely forgot about it. i pluged it into the charger and it showed the apple logo for awhile and then turned on. i left it on the charger till it was fully charged. when i pulled it off the charger, it turned completely off and wouldnt turn back on till i pluged it back in. then it showed the logo and turned back on. ive done that like 10 times and it wont work off the charger. is there any way 2 make it work without takin it 2 the shop? ive already reset all the setting on my ipod and it didnt help. ill try anything 2 get this ipod working, so please HELP!

Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. However,it may not be worth it for a 2G iPod. Might just trash it.
Apple Retail Store - Genius Bar

Help my Mac mini wont work with the airpot

I have got the Mac mini Intel Core Solo G5 model and ive got a ibook G4 my G4 works great and fine but my mac mini does not. I connect to the base station fine useing the drop down bit on the taskbar in finder and enter the password and it connects. But when i do network assistant and it asks for me to eneter the password again it just basicly frezzes for a min then says invalid password when i know that it is the write base station password. It did work once but froze again and said could not connect. and when i go into the airport utlity it can't descover the base station even though it says it is connected with a full signal, im doing the excatly same things i did with my ibook but it just wont work. Please can someone help me and tell me what i have to do or give me some support this is my last hope as apple aren't intrested. I will be very gratful!

The software update was for Intel based Mac computers and does not specify Core Duo or Core 2 Duo:
AirPort Extreme Update 2007-001
This update is recommended for all Intel-based Macintosh computers and provides compatibility with AirPort Extreme base stations and networks.
This is the update that generated a fix at www.macfixit.com because some folks have been having issues with connection with their internet provider and some people have had issue with their airport systems just shutting down.
It was part of an auto update that was received. One of my Macs is a MacBook Pro Core Duo (not Core 2 Duo) and this upgrade (download) was part of the update check that is automatically performed.

I have a old ipod 3rd generation and today the toch screen wont work and the slide to unlock wont work really need help i dont want to reset it because it has information on it that i really need

I have a ipod touch 3g the touch screen wont work but everything else do slide to unlock dosent work cant reset it need help immediaty need info off of it

Try this: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears

I have an iPod G2 with a firewire 400 lead. how can I attach it to my new 13 inch Mac book Pro, is there a 400 to 800 firewire converter. USB lead wont work with the Macbook Pro. iPod used as an external drive to archive memory cards on the go.

My G2 iPod that I use as an external drive to archive memory cards on the go cannot link with my new 13" Macbook Pro cause it uses a firewire 400 lead. It will not work with a USB lead. Is there a firewire 800 ipod lead or converter available? Can any one shed some light on this please?

As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

Nokia 6124 classic wont work with the USB Data Cab...

Hi all,
I'm trying to connett Nokia 6124 classic but its not working with the USB Data Cable. Is there a way to fixing it yourself?
Thanks
Jonathan 'Jonnie'

You should install the drivers first before connecting your phone. Drivers are bundled in with pcsuite/ovi suite which can be downloaded from here.

Screen wont work on the right side.

So, I've had some time with my phone, alot of damage has been done screen-wise (cracks, glass peeling, ect.) , and even some hardware is showing, but it still functioned properly. About thirty minutes ago, I set the phone down, and when I picked it back up, the right side of the screen is not working, and the resolution has been reverted back to what the 3rd gen would have. I can not unlock my phone, due to the fact that part of my passcode resides in the right side of my screen, but when I go to restore my phone through iTunes, it tells me I need to go to the settings on my iphone and turn off "Find My Phone". This would be no problem if I could unlock my phone, but I can't, and now I'm stuck and I don't know what to do. Please help.
Also, I've already planned on getting a new phone at the beginning of next month, the iPhone 5s to be exact, but I need this phone to last up till the current month ending.

This is a digitizer problem. Restore the iPhone with iTunes on computer. After the Restore see if fixed. If still problem and if there is Warranty or AppleCare take to Apple for replacement iPhone 4S. If no Coverage, Replacement iPhone 4S is $199.

My ipod has completly knackered it's self and the touch screeen has completely packed in, wont work on the computer when i plug it in also i cannot switch it off or on standby. What should i do?

Well lately my ipod has just started playing up basicly the touch facility has started to not work it will not let me turn it of or on standby aswell when i plug it in to my computer so i can factory reset incase it has a virus on it but it does not show on the screen also i tried drayning the battery and then recharging in hope it will work but no it still does not work. I am really stuck and I need my ipod as soon as possible please help

hard reset the ipod. IN THIS ORDER. plug in the ipod, turn the ipod off, open itunes, press the sleep button (top) for 3 seconds, continue to press the sleep button and also (at the same time) press the home button. Contunue to do this until 3 seconds after the screen flashes. Then release the sleep button and continue to press the home button until the ipod shows up in itunes. do a factory reset.

My new charger wont work for the computer but will work in the wall charger

So recently, the charger for my Ipod touch 5th generation broke(my puppy chewed it) so I went to get a new charger. I found that the new charger was not working when i plugged it into my computer. After i returned the charger, and got one that seemed a little better, i plugged it into my computer and found that that one also didnt work. I was extremely angry and confused about why they werent working. I was wondering if the problem was my ipod or the charger or the computer. So i plugged it into a wall charger in the wall and that did work! So now im assuming its just my computer but it has always worked before when i plugged it into my computer untill the last charger i had broke. Any idea how to fix this? Or is this unfixable?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If iTunes does not see the iPod:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Itunes wont work after the update 7.1

it wont open and just says.... itunes cannot run because it has detected a problem with your audio configuration. i have uninstalled it 10x or more and reinstalled with no luck

Did you take a look at the topic I told you it explain to you hot to remove iTunes, without loosing your files. Theres also a link to install the older 7 version. Hope this helps you out.

Page back wont work. The page reference is lost in some cases regardless of web site (intermittent)

page back won't work The page reference is lost in some cases regardless of web site or action taken(the problem is intermittent)
I have three home tabs and on some occasions if I open one of them and start to browse it I can't return to the top page. It doesn't always happen and it can happen on any of them. It made using apps impossible and the only way to correct the situation is to hit the home key and close the incorrect tabs

It's also possible your session history file is not updating correctly, because you should not be thrown back to an earlier state in a tab.
By default, Firefox updates the sessionstore.js file every 15 seconds with any changes. But occasionally Firefox may stop updating the file or may find that the file is locked and start creating a different sessionstore file (which is never restored and just sites orphaned in your profile folder).
Could you take a look?
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
In the first table on the page, click the "Show Folder" button.
In the window that launches, switch the view to Details and scroll down to the sessionstore files. You may find:
* sessionstore.js (current session)
* sessionstore.bak (previous session windows and tabs)
* sessionstore.bak-''datetime'' (windows and tabs at your last update)
* sessionstore-1.js (or other numbered files -- session history that couldn't be saved into sessionstore.js)
Note: If Windows does not display .js extension, please switch off the hiding of file extension using the procedure in this article: [http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions].
Anything odd about the timestamps or any numbered sessionstore files?

My headphones wont work in the ipad audio minijack

my headphone minijack won't work. I've checked that the headphones I use work in everything else.

The iPad has a standard 3.5 mm jack. Any pair of headphones with a 3.5 mm connector should work.
Have you plugged them in all the way?

Subtitles wont work on the secon layer of the dual layer disc

Similar Messages

Maybe you are looking for