Subtotal in Dynamic ALV

Hi,
Please tell how to perform Subtotal in dynamic ALV Report.
Normal Subtotal functionality(the one which is used for static ALV report ) is not working for that.
Thanks.

Similar Messages

Subtotal Text in Dynamic ALV

I have faced the problem with Subtotal Text in Dynamic ALV.
I don't know why it is not get into "FORM subtotal_text " .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
     i_callback_program             = sy-repid
   IS_LAYOUT                        = gw_layout
     it_fieldcat                    = gi_fieldcat[]
     it_sort                        = gi_sort[]
     it_events                      = gi_events
    TABLES
      t_outtab                       = <gi_dyntable>
   EXCEPTIONS
     program_error                  = 1
     OTHERS                         = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and
*&      Form subtotal_text
*       text
* --> p1        text
* <-- p2        text
FORM subtotal_text USING p_total type ref to data
                         p_subtottxt_info TYPE slis_subtot_text.
break-point.
ENDFORM.                    " alv_subtotal
Thanks in advance

I put the form name to gi_events
*&      Form event_build
*       text
* --> p1        text
* <-- p2        text
FORM event_build .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gi_events.
READ TABLE gi_events WITH KEY name = 'SUBTOTAL_TEXT' INTO gw_events.
IF sy-subrc = 0.
    MOVE 'SUBTOTAL_TEXT' TO gw_events-form.
    MODIFY gi_events FROM gw_events INDEX sy-tabix.
ENDIF.
ENDFORM.                    " event_build

How to get subtotal value in ALV list display

Hi all,
How to give condition on the value of subtotal line in ALV list display,
i.e.if value of subtotal of plan quantity = actual quantity (in red oval) it should show the message
'ON TIME DELIVERY' else it should not show messagee.In my case(shown in red oval) its
showing for each subtotal value. I know how to change the subtotal text but i want to change
with respect to value of the subtotal.(plz refer attachment)
Any input regard to this will be achieved great.
Many thanks in advance.
samadhan shinde.

Hi Samadhan,
I am awaiting for solution for this problem.....but as i think dynamically displaying sub total based on
matching actual quantity and planned quantity is bit complicated.
My idea is to display matched quantities in one block and unmatched quantities in another. I mean using blocked list.
awaiting suggestions.
regards,

How to add sum in dynamic alv ?

hello ,
i create dynamic alv , by using FIELD-SYMBOLS ,
but my columns are char type , and the SUM an SUBTOTAL
not work .
how i can tern the internal table that build with char
columns to be numeric (like BSIK-WRBTR)?

FIRST OF ALL THANKS , BUT .... ))
NOW THE LINE OF THE SUM DISPLAY AS THE FIRST LINE AND
ALL OTHER LINE AFTER IT )) .
HOW CAN I TERN IT TO BE NORMAL ( IN BUTTOM ) ? .
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      I_STRUCTURE_NAME = 'YAG_ST_FOR_SPLITE_PER_VEND'
    CHANGING
      CT_FIELDCAT      = LT_FIELDCATALOG[].
DESCRIBE TABLE LT_FIELDCATALOG LINES LIN6 .
LIN6 = LIN6 + 1 .
LOOP AT IT_SPLITE_COLUMNE .
    LS_ALV_CAT-FIELDNAME = IT_SPLITE_COLUMNE-FIELD_NAME.
    LS_ALV_CAT-REF_FIELD = IT_SPLITE_COLUMNE-FIELD_NAME.
    LS_ALV_CAT-COL_POS   = LIN6.
    LS_ALV_CAT-DATATYPE   = 'QUAN'.
    LS_ALV_CAT-DO_SUM     = 'X'.
    LS_ALV_CAT-TABNAME   = 'IT_SPLIT_FOR_REP'.
    APPEND LS_ALV_CAT TO LT_FIELDCATALOG.
    LIN6 = LIN6 + 1 .
ENDLOOP.

Passing the Total/Subtotal Text in ALV

Hi All,
I would like to know is there any chance with ALV to pass Total/Subtotal Text.
PS:I'm not looking for the text ls_layout-totals_text = 'Grand Total'.
ls_layout-subtotals_text = 'SubTotal'.
What i'm looking for is In My below Output:
112365               TDS Windsor Sequencing
112365               TDS Windsor Sequencing
112365               TDS Windsor Sequencing
* Total <Group text> "Here My   total amount is showing
112313               Operations and Engineering
* Total   <Group text>      "Here My   total amount is showing
112363               DCX Windsor
* Total      <Group text>            "Here My   total amount is showing
** Subtotal <Group text>   "Here My "SUB total" amount is showing of above three totals
I've <Group text> in My Final ALV one of field, but need to show at the place of <Group text> in above output.
PS:And For Totals/Subtotals i'm using standard function of ALV by passing IT_SORT(which is in Reuse_Alv..FM)
Any Hints?
Thank You,
Cheers,
Amit.

Hi Amit,
Please check this example..I used the event BEFORE_LINE_OUTPUT to populate the subtotal texts
dynamically..Used the Field-symbols technique to populate the subtotals text...Hope this is what you
are looking for.
TYPE-POOLS: slis,kkblo.
DATA: BEGIN OF wa,
        vbeln TYPE vbeln,
        posnr TYPE posnr,
        matnr TYPE matnr,
        netpr TYPE netpr,
        waerk TYPE waerk,
        text TYPE char20,
      END OF wa.
DATA: BEGIN OF wa_vbak,
        vbeln TYPE vbeln,
      END OF wa_vbak.
DATA: i_event   TYPE slis_t_event,
      t_sort    TYPE slis_t_sortinfo_alv,
      s_sort    TYPE LINE OF slis_t_sortinfo_alv,
      l_s_event TYPE LINE OF slis_t_event.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_layout       TYPE slis_layout_alv.
DATA: v_repid        TYPE syrepid.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
DATA: itab1          LIKE TABLE OF wa.
DATA: itab           LIKE TABLE OF wa_vbak.
START-OF-SELECTION.
* Field catalog populate.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'NETPR'.
s_fieldcatalog-do_sum = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
* Get vbak
SELECT vbeln UP TO 100 ROWS
FROM
vbak
INTO TABLE itab.
IF NOT itab[] IS INITIAL.
* Get vbap
    SELECT vbeln posnr matnr netpr waerk arktx
    FROM vbap
    INTO TABLE itab1
    FOR ALL ENTRIES IN itab
    WHERE vbeln = itab-vbeln.
ENDIF.
v_repid = sy-repid.
* Build sort internal table.
s_sort-spos      = '1'.
s_sort-fieldname = 'VBELN'.
s_sort-tabname = 'ITAB1'.
s_sort-up = 'X'.
s_sort-subtot = 'X'.
s_sort-group = 'UL'.
APPEND s_sort TO t_sort.
* Get alv events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 2
    IMPORTING
      et_events       = i_event
    EXCEPTIONS
      list_type_wrong = 0
      OTHERS          = 0.
* Before line output.
READ TABLE i_event INTO l_s_event
                    WITH KEY name = 'BEFORE_LINE_OUTPUT'.
IF sy-subrc = 0.
    MOVE 'BEFORE_LINE_OUTPUT' TO l_s_event-form.
    MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.
* Populate dummy text.
s_layout-subtotals_text = 'Dummy'.
* Init
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program = v_repid.
* Append
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                  = s_layout
      it_fieldcat                = t_fieldcatalog
      i_tabname                  = 'ITAB1'
      it_events                  = i_event
      it_sort                    = t_sort
    TABLES
      t_outtab                   = itab1
    EXCEPTIONS
      program_error              = 1
      maximum_of_appends_reached = 2
      OTHERS                     = 3.
* Display
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
*&      Form BEFORE_LINE_OUTPUT
*       text
*      -->GS_LINEINFO text
FORM before_line_output USING gs_lineinfo TYPE kkblo_lineinfo.
FIELD-SYMBOLS: <fs_layout> TYPE kkblo_layout.
ASSIGN ('(SAPLKKBL)GT_STACK-IS_LAYOUT') TO <fs_layout>.
CHECK sy-subrc = 0.
* Check if it is subtotal line.
CHECK gs_lineinfo-subtot = 'X'.
* Get the text
READ TABLE itab1 INTO wa INDEX gs_lineinfo-sumindex.
IF sy-subrc = 0.
    <fs_layout>-subtotals_text = wa-text.
ENDIF.
ENDFORM.                    "BEFORE_LINE_OUTPUT
Thanks
Naren

Subtotal in Blocked ALV

Hi All,
I am facing the problem in displaying the subtotal in Blocked ALV.
My requirement is, I need to display the subtotals in 3 lines like below.
for ex:
subtotal:          7 <above total>
                      (5)<coming from someother field>
                       2
from the above: 7 is total of that column.
                          5 is coming from some other field.
                          2 is substraction of above 2.
Could anyone please help me in the above.
Many thanks in advance.
Regards,
venkat.

Hi Vaibhav,
Thanks for your response.
and one thing here in my above example is, the value 5 is neither total nor subtotal. its just a different value coming from some other field.
only the 7 is total of that column.
and if I write that logic manually, It may not able display as the position of that column is around 500. because write statment may display upto 252nd position in the output, I guess.
thank you very much.
Regards,
Venkat.
Edited by: venkat reddy on Jan 18, 2010 8:45 PM

How to display a row after a subtotal field in ALV Grid

Hi All,
My requirement is to print a extra row with values and constant text after printing subtotal values in ALV Grid.
e.g. TOTAL 12.23 ---> Subtotal field
Tax 5.2 ---> extra row after subtotal field.
Please help me....
Thanks in advance.
Regards
Ajay

Hi
You can try using INSERT <WA> OR INSERT INITIAL LINE .
fill the wa with tax value.
INSERT <wa> into table < internal table >
A row will be inserted into internal table with the values.
Try this and let me know.
Thanks
Hariharan

Problem in Data Display in Dynamic ALV Report

Hi all,
I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
REPORT zdynamic_test                           .
*REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS: slis.
*TABLES
TABLES: zjpack_base.
*Types
TYPES:
      ty_fcat      TYPE lvc_s_fcat,
      ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
      wa_fcat      TYPE ty_fcat,
      wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
      it_fcat      TYPE STANDARD TABLE OF ty_fcat,
      it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
      it_dyn_tab   TYPE REF TO data,
      wa_newline   TYPE REF TO data.
*INTERNAL TABLE
DATA: BEGIN OF it_itab OCCURS 0.
        INCLUDE STRUCTURE zjpack_base.
DATA: END OF it_itab.
*Filed symbols
FIELD-SYMBOLS:
      <gt_table>   TYPE STANDARD TABLE,
      <fs_dyntable>,
      <fs_fldval> TYPE ANY,
      <l_field>    TYPE ANY.
*Variables
DATA:
      l_fieldname TYPE lvc_s_fcat-fieldname,
      l_tabname    TYPE lvc_s_fcat-tabname,
      l_fieldtext TYPE lvc_s_fcat-seltext,
      l_index      TYPE char2.
"Selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
SELECTION-SCREEN END OF BLOCK b1.
PARAMETERS:
         p_colms   TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM select_data.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
DO 20 TIMES.
   DO p_colms TIMES.
     l_index = sy-index.
     CONCATENATE 'FIELD' l_index INTO l_fieldname.
     ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
     <l_field> = sy-index.
   ENDDO.
   INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDDO.
LOOP AT it_itab.
    l_index = sy-tabix.
    CONCATENATE 'FIELD' l_index INTO l_fieldname.
    ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
    <l_field> = it_itab-matnr.
    INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDLOOP.
LOOP AT it_fcat INTO wa_fcat.
    PERFORM fieldcatalog1 USING: wa_fcat-fieldname
                                  wa_fcat-tabname
                                  wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = 'ZTEST_NOTEPAD'
      it_fieldcat        = it_fcatalog
    TABLES
      t_outtab           = <gt_table>.
*&      Form BUILD_FIELDCAT
FORM build_fieldcat .
CLEAR: l_fieldname,
        l_tabname,
        l_fieldtext,
        l_index.
DO p_colms TIMES.
   CLEAR l_index.
   l_index = sy-index.
   CONCATENATE 'FIELD' l_index INTO l_fieldname.
   CONCATENATE 'Field' l_index INTO l_fieldtext.
   l_tabname = '<GT_TABLE>'.
   PERFORM fieldcatalog USING: l_fieldname
                               l_tabname
                               l_fieldtext.
ENDDO.
ENDFORM.                    " BUILD_FIELDCAT
*&      Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fcat
    IMPORTING
      ep_table        = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM.                    " CREATE_DYNAMIC_TABLE
*&      Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname   = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM.                    " FIELDCATALOG
*&      Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname   = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM.                    " FIELDCATALOG1
*&      Form SELECT_DATA
      text
--> p1        text
<-- p2        text
FORM select_data .
DATA: v_srlno TYPE i.
SELECT matnr charg blqty
INTO CORRESPONDING FIELDS OF it_itab
FROM zjpack_base
WHERE matnr IN s_matnr
AND   charg IN s_charg
AND   fdate IN s_fdate.
    COLLECT it_itab.
ENDSELECT.
v_srlno.
LOOP AT it_itab.
   v_srlno = v_srlno + 1.
ENDLOOP.
CLEAR: l_fieldname,
          l_tabname,
          l_fieldtext,
          l_index.
1st Field
l_index = sy-tabix.
CONCATENATE 'FIELD' '1' INTO l_fieldname.
l_fieldtext = 'MATNR'.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
                              l_tabname
                              l_fieldtext.
Other fields
LOOP AT it_itab.
    CLEAR l_index.
    l_index = sy-tabix + 1.
    CONCATENATE 'FIELD' l_index INTO l_fieldname.
    CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
    l_tabname = '<GT_TABLE>'.
    PERFORM fieldcatalog USING: l_fieldname
                                l_tabname
                                l_fieldtext.
ENDLOOP.
Please guide me how my problem will solve.
Thanks & Regards
Nirmal

Hi all, I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
*& Report ZDYNAMIC_TEST                                               *
REPORT zdynamic_test                           .
*REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS: slis.
*TABLES
TABLES: zjpack_base.
*Types
TYPES:
      ty_fcat      TYPE lvc_s_fcat,
      ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
      wa_fcat      TYPE ty_fcat,
      wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
      it_fcat      TYPE STANDARD TABLE OF ty_fcat,
      it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
      it_dyn_tab   TYPE REF TO data,
      wa_newline   TYPE REF TO data.
*INTERNAL TABLE
DATA: BEGIN OF it_itab OCCURS 0.
        INCLUDE STRUCTURE zjpack_base.
DATA: END OF it_itab.
*Filed symbols
FIELD-SYMBOLS:
      <gt_table>   TYPE STANDARD TABLE,
      <fs_dyntable>,
      <fs_fldval> TYPE ANY,
      <l_field>    TYPE ANY.
*Variables
DATA:
      l_fieldname TYPE lvc_s_fcat-fieldname,
      l_tabname    TYPE lvc_s_fcat-tabname,
      l_fieldtext TYPE lvc_s_fcat-seltext,
      l_index      TYPE char2.
"Selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
SELECTION-SCREEN END OF BLOCK b1.
PARAMETERS:
         p_colms   TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM select_data.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
* DO 20 TIMES.
*    DO p_colms TIMES.
*      l_index = sy-index.
*      CONCATENATE 'FIELD' l_index INTO l_fieldname.
*      ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
*      <l_field> = sy-index.
*    ENDDO.
*    INSERT <fs_dyntable> INTO TABLE <gt_table>.
* ENDDO.
LOOP AT it_itab.
    l_index = sy-tabix.
    CONCATENATE 'FIELD' l_index INTO l_fieldname.
    ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
    <l_field> = it_itab-matnr.
    INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDLOOP.
LOOP AT it_fcat INTO wa_fcat.
    PERFORM fieldcatalog1 USING: wa_fcat-fieldname
                                  wa_fcat-tabname
                                  wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = 'ZTEST_NOTEPAD'
      it_fieldcat        = it_fcatalog
    TABLES
      t_outtab           = <gt_table>.
*&      Form BUILD_FIELDCAT
FORM build_fieldcat .
* CLEAR: l_fieldname,
*         l_tabname,
*         l_fieldtext,
*         l_index.
* DO p_colms TIMES.
*    CLEAR l_index.
*    l_index = sy-index.
*    CONCATENATE 'FIELD' l_index INTO l_fieldname.
*    CONCATENATE 'Field' l_index INTO l_fieldtext.
*    l_tabname = '<GT_TABLE>'.
*    PERFORM fieldcatalog USING: l_fieldname
*                                l_tabname
*                                l_fieldtext.
* ENDDO.
ENDFORM.                    " BUILD_FIELDCAT
*&      Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fcat
    IMPORTING
      ep_table        = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
* Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM.                    " CREATE_DYNAMIC_TABLE
*&      Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname   = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM.                    " FIELDCATALOG
*&      Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname   = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM.                    " FIELDCATALOG1
*&      Form SELECT_DATA
*       text
* --> p1        text
* <-- p2        text
FORM select_data .
* DATA: v_srlno TYPE i.
SELECT matnr charg blqty
INTO CORRESPONDING FIELDS OF it_itab
FROM zjpack_base
WHERE matnr IN s_matnr
AND   charg IN s_charg
AND   fdate IN s_fdate.
    COLLECT it_itab.
ENDSELECT.
* v_srlno.
* LOOP AT it_itab.
*    v_srlno = v_srlno + 1.
* ENDLOOP.
CLEAR: l_fieldname,
          l_tabname,
          l_fieldtext,
          l_index.
* 1st Field
* l_index = sy-tabix.
CONCATENATE 'FIELD' '1' INTO l_fieldname.
l_fieldtext = 'MATNR'.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
                              l_tabname
                              l_fieldtext.
* Other fields
LOOP AT it_itab.
    CLEAR l_index.
    l_index = sy-tabix + 1.
    CONCATENATE 'FIELD' l_index INTO l_fieldname.
    CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
    l_tabname = '<GT_TABLE>'.
    PERFORM fieldcatalog USING: l_fieldname
                                l_tabname
                                l_fieldtext.
ENDLOOP.
ENDFORM.                    " SELECT_DATA

Dynamic ALV and cl_abap_structdescr Create method

Hi
In the process of creation of Dynamic ALV, as I have char_name and char_descr fields, I have to use char_descr as column header of ALV because char_name which has entries something like DVS_******(that do not make any sense to user). I am facing 2 problems here using the scenario above.
1. char_descr contains characters like '[', ']', ' /', '.', space which are invalid characters for method cl_abap_structdescr=>create(). How to handle scenario like this?
2. assign (lv_value) to <value>.
        if sy-subrc = 0.
          <value> = ls_bapi_char_value-charvalue.
          if <value> is assigned.
            move ls_bapi_char_value-charvalue to <value>.
where-> concatenate '<table_dyn_wa>-' ls_bapi_char-char_descr into lv_value
               <value> type any
              <table_dyn_wa>- is dynamic table with structure created with cl_abap_tabledescr=>create( p_line_type = stru_type )
with above code for few fields data is being assigned and for few sy-subrc = 4. The table from where I am reading the field contains char_name associated with it and not char_descr. For the fields whose char_name and char_descr matches exactly, ALV displays data for it.
How to resolve the issue so that I could get all the data?
Let me know if further details are needed.
Thanks, in advance
Trupti
Edited by: TRUPTI KALLURWAR on Jul 9, 2010 7:08 PM

Hello Srikanth,
CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE( ) uses the GENERATE SUBROUTINE POOL technique to create the dynamic internal tables.
And as per the SAP documentation,
In an internal mode, a maximum of 36 temporary subroutine pools may be created.
Source: [http://help.sap.com/abapdocu_702/en/abapgenerate_subroutine_pool.htm]
Btw why are you crating 36 dynamic internal table? That's way too far-fetched even for the RTTC classes
BR,
Suhas

Problem in Dynamic ALV - inserting values in proper field of a table.

Hi gurus,
As per the user requirement I need to create a dynamic alv report. The fields will be display according to the period entered.
I have already build the alv and it is working fine. But My questio is how can I append data into internal table in its proper field.
suppose I have enter period 1 to 3 in selection screen. Then my table structure will be
JAN | FEB | MAR
Upto this is is working fine, fields are generated dynamically , but how can I insert data only in perticular field.
like
itab-JAN = 001.
itab-FEB = 002.
itab-MAR = 003.
append itab
JAN | FEB | MAR
001 002 003
Please give me a solution of that. waiting for reply.

hI,
loop at <dyn_table> assigning <wa>.
lv_count = 001.
*perform get_short_tet of month in a varibale say lv_var
assign component LV_VAR of structure <wa> to <dyn_field1>.
<dyn_field1> = lv_count.
lv_count = lv_count + 1.
endloop.
Regards,
mrunal
Edited by: Mrunal Shyamkant Patki on Nov 5, 2009 10:53 AM
Edited by: Mrunal Shyamkant Patki on Nov 5, 2009 10:54 AM

SUBTOTAL TEXT IN ALV GRID

HI ALL,
could any one send me how to display the subtotal Text in ALV grid output with code sample.
with thanks.
kannan

hi,
means u want to print some text instead of star ( coming in subtotal) ?
If so than try like,
*& Report ZALV_LIST
REPORT zalv_list.
TABLES : mseg.
TYPE-POOLS : slis.
DATA : BEGIN OF itab OCCURS 0,
        mblnr LIKE mseg-mblnr,
        matnr LIKE mseg-matnr,
        werks LIKE mseg-werks,
        menge LIKE mseg-menge,
        line_color(4) TYPE c,
       END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
        mblnr LIKE mseg-mblnr,
        matnr LIKE mseg-matnr,
        werks LIKE mseg-werks,
        menge LIKE mseg-menge,
        line_color(4) TYPE c,
       END OF itab1.
DATA : t_fcat TYPE slis_t_fieldcat_alv,
       t_eve TYPE slis_t_event,
       t_subtot TYPE slis_t_sortinfo_alv,
       subtot LIKE LINE OF t_subtot,
       wa_fcat LIKE LINE OF t_fcat,
       gd_layout    TYPE slis_layout_alv.
DATA : gt_menge LIKE mseg-menge,
       st_menge LIKE mseg-menge.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : doc FOR mseg-mblnr.
SELECTION-SCREEN : END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_cat USING t_fcat.
PERFORM build_eve.
PERFORM build_layout.
START-OF-SELECTION.
PERFORM get_data.
PERFORM display.
*&      Form build_cat
      text
     -->TEMP_FCAT text
FORM build_cat USING temp_fcat TYPE slis_t_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MBLNR'.
wa_fcat-seltext_m = 'Material Doc.'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'Material'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Plant'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MENGE'.
wa_fcat-seltext_m = 'Quantity'.
wa_fcat-do_sum = 'Y'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
subtot-spos = 1.
subtot-fieldname = 'MBLNR'.
subtot-tabname = 'ITAB'.
subtot-up = 'X'.
subtot-group = 'X'.
subtot-subtot = 'X'.
subtot-expa = 'X'.
APPEND subtot TO t_subtot.
ENDFORM.                    "build_cat
*&      Form build_eve
      text
FORM build_eve.
DATA : wa_eve TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = t_eve
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE t_eve WITH KEY name = slis_ev_top_of_page
                         INTO wa_eve.
IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO wa_eve-form.
    APPEND wa_eve TO t_eve.
ENDIF.
ENDFORM.                    "build_eve
*&      Form build_layout
      text
FORM build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-info_fieldname =      'LINE_COLOR'.
gd_layout-subtotals_text = 'Sub Total'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form get_data
      text
FORM get_data.
SELECT mblnr matnr werks menge FROM mseg INTO CORRESPONDING FIELDS OF TABLE itab
WHERE mblnr IN doc.
SORT itab BY mblnr.
LOOP AT itab.
    AT NEW mblnr.
      LOOP AT itab WHERE mblnr = itab-mblnr.
        st_menge = st_menge + itab-menge.
        itab1-mblnr = itab-mblnr.
        itab1-matnr = itab-matnr.
        itab1-werks = itab-werks.
        itab1-menge = itab-menge.
        APPEND itab1.
      ENDLOOP.
      itab1-mblnr = 'Sub_Total'.
      itab1-matnr = ''.
      itab1-werks = ''.
      itab1-menge = st_menge.
      itab1-line_color = 'C710'.
      APPEND itab1.
      itab1-line_color = ''.
      CLEAR st_menge.
    ENDAT.
ENDLOOP.
LOOP AT itab.
    gt_menge = gt_menge + itab-menge.
ENDLOOP.
itab1-mblnr = 'Total'.
itab1-matnr = ''.
itab1-werks = ''.
itab1-menge = gt_menge.
itab1-line_color = 'C310'.
APPEND itab1.
ENDFORM.                    "get_data
*&      Form display
      text
FORM display.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
     i_callback_program             = 'ZALV_LIST'
     is_layout                      = gd_layout
     it_fieldcat                    = t_fcat
    it_sort                        = t_subtot
     it_events                      = t_eve
    TABLES
      t_outtab                       = itab1
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display
*&      Form top_of_page
      text
FORM top_of_page.
WRITE:/ 'Data'.
ENDFORM.                    "top_of_page
reward if useful....
Edited by: Dhwani shah on Dec 20, 2007 1:20 PM

Problem in print out of Dynamic ALV

Hi ,
I am using dynamic ALV to address a requirement. The ALV is working fine and the output is also coming corretly, even in spool.
But if the width of dynamic table exceeds a limit, then nothing is coming in the print out.
If anyone has faced similar problem or knows how to tackle this problem, please advise what can be done here.
Thanks,
Sonal

Hi,
Can you try to increase field with to maximun as per your requirement.
Regards,
Sai

Color Cell in Dynamic ALV

Hi all
i try to put color in the dynamic alv, but i become a dump message
Runtime Errors         OBJECTS_MOVE_NOT_SUPPORTED
Date and Time          28.10.2010 08:46:49
Short text
     Conversion of type "h" to type "g" not supported.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSLVC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     You attempted to move one data object to another.
     This is not possible here because the conversion of a data object
     of type "h" to type "g" is not supported.
my code implementation looks like
method validate_order_deli.
    data ls_scol        type lvc_s_scol.
    data ls_colo        type lvc_s_colo.
    data ls_aoc_percent type zsd_aoc_percent.
    data lf_deliv       type lifmg.
    data lf_db_percent type f.
    data lf_calc_perc   type f.
    refresh et_color.
    select single *
      from zsd_aoc_percent
      into corresponding fields of ls_aoc_percent
      where acin = 'X'.
    if sy-subrc <> 0.
      exit.
    endif.
    lf_db_percent = ls_aoc_percent-percent.
*    ls_scol-fname = if_fieldname.
    ls_scol-fname = 'MATNR'.
    if if_deliv <> 0.
      me->calc_amour_unit(
        exporting
          if_matnr = if_matnr
          if_amount = if_deliv
          if_input = if_deliv_unit
          if_output = if_order_unit
        importing
          ef_amount = lf_deliv
      lf_calc_perc = ( lf_deliv * 100 ) / if_order.
      if lf_calc_perc < lf_db_percent.
        ls_colo-col = cl_gui_resources=>list_col_positive.
      else.
        ls_colo-col = cl_gui_resources=>list_col_negative.
      endif.
      ls_scol-color = ls_colo.
      append ls_scol to et_color.
    else.
      exit.
    endif.
endmethod.                    "validate_order_deli
method add_color_field.
    data ls_fcat type lvc_s_fcat.
    ls_fcat-fieldname = 'COLOR'.
    ls_fcat-ref_field = 'COLTAB'.
    ls_fcat-ref_table = 'CALENDAR_TYPE'.
    append ls_fcat to ct_fcat.
endmethod.                    "add_color_field
      ls_lvc_s_layo-cwidth_opt = 'X'.
      ls_lvc_s_layo-ctab_fname = 'COLOR'.
i don't no, what's wrong...
thx for help

*&      Form generate_alv
*       text
form generate_alv.
field-symbols <lt_any_table> type any table.
if lrf_gui_custom_container is initial.
    create object lrf_gui_custom_container
      exporting
        container_name = lf_container.
    create object lrf_gui_alvgrid
      exporting
        i_parent = lrf_gui_custom_container.
    ls_lvc_s_layo-cwidth_opt = 'X'.
    ls_lvc_s_layo-ctab_fname = 'COLOR'.
    check sy-subrc = 0.
    call method lrf_gui_alvgrid->set_table_for_first_display
         exporting
*             i_buffer_active               =
*             i_bypassing_buffer            =
*             i_consistency_check           =
*             i_structure_name              = 'ZAM_CELL_COLOR'
*             is_variant                    = ls_disvariant
*             i_save                        = 'A'
*             i_default                     = 'X'
           is_layout                     = ls_lvc_s_layo
*             is_print                      =
*             it_special_groups             =
*             it_toolbar_excluding          =
*             it_hyperlink                  =
*             it_alv_graphics               =
*             it_except_qinfo               =
*             ir_salv_adapter               =
          changing
            it_outtab                     = <gt_table>
            it_fieldcatalog               = gt_dyn_fcat
*             it_filter                     =
         exceptions
           invalid_parameter_combination = 1
           program_error                 = 2
           too_many_lines                = 3
           others                        = 4.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
                 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
endif.
endform.                    "generate_alv
*&      Module STATUS_0100 OUTPUT
*       text
module status_0100 output.
set pf-status 'ZAM_CELL_STATUS'.
set titlebar 'ZAM_CELL_TIT'.
perform generate_alv.
endmodule.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
module user_command_0100 input.
data lf_okcode type syucomm.
call method cl_gui_cfw=>dispatch.
lf_okcode = ok_code.
case lf_okcode.
    when 'EXIT'.
      set screen 0.
      leave screen.
    when 'CANCEL'.
      leave program.
    when 'BACK'.
      set screen 0.
      leave screen..
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT

To activate total & subtotal button in ALV by class

Hi,
Kindly suggest how to activate total & subtotal button in ALV by class. I have used layout configuration by lvc_s_layo.
gs_layout type lvc_s_layo.
Ashutosh Kumar

Dears,
Do_SUM is not available in gs_layout type lvc_s_layo.
Its working only in function module REUSE_ALV_LIST_DISPLAY.
How to use in class ALV.
FORM SUB_CREATE_FIELDCATALOG .
THIS BELOW FIELD IS EDITABLE
PERFORM APPEND_FIELDCAT USING:'MATNR'
                              'Material No.'
                              'CHAR'
                              '30'
PERFORM APPEND_FIELDCAT USING:'MATKL'
                              'DOCUMENT TYPE'
                              'CHAR'
                              '10'
PERFORM APPEND_FIELDCAT USING:''
                              'CHAR'
                              '4'
                              'C610'
      PERFORM APPEND_FIELDCAT USING:'NTGEW'
                              'NET WT'
                              'P'
                              '10'
                              'C610'
                              'X'.
    PERFORM APPEND_FIELDCAT USING:'VOLTO'
                              'VOLUME'
                              'P'
                              '10'
                              'C610'
                              'X'.
     PERFORM APPEND_FIELDCAT USING:'VPREH'
                              'COST'
                              'P'
                              '10'
                              'C610'
ENDFORM.                    " SUB_CREATE_FIELDCATALOG
*&      FORM APPEND_FIELDCAT
      TEXT
     -->P_0116   TEXT
     -->P_0117   TEXT
     -->P_0118   TEXT
     -->P_0119   TEXT
     -->P_0120   TEXT
     -->P_10     TEXT
FORM APPEND_FIELDCAT USING    P_114
                               P_115
                               P_116
                               P_117
                               P_118
                               P_119.
CLEAR GT_FIELDCAT_LVC.
GT_FIELDCAT_LVC-FIELDNAME = P_114.
GT_FIELDCAT_LVC-COLTEXT = P_115.
GT_FIELDCAT_LVC-DATATYPE = P_116.
GT_FIELDCAT_LVC-OUTPUTLEN    = P_117.
GT_FIELDCAT_LVC-EMPHASIZE = P_118.
GT_FIELDCAT_LVC-do_sum = P_119.
   append gt_fieldcat_lvc.

I want to create dynamic ALV report

Hi great abapers,
I want to create dynamic ALV report.Please help me.
Regards,
Billa

Hi,
Please check the code below:
REPORT YMMR_PALLET_OVERVIEW MESSAGE-ID Y_MESSAGE_0001.
Short description:
To Display and sum up the Quantity of scanned materials on pallet for*
each Shipment number for the Packaging Materials. *
TYPE-POOLS : SLIS.
TABLES: YYLE0003. " Scanned SSCC No.
--Structure Declaration--
Structure for Shipment No. and Date.
TYPES : BEGIN OF T_VTTK_TAB ,
TKNUM LIKE VTTK-TKNUM, " Shipment number
ERDAT LIKE VTTK-ERDAT, " created Date
END OF T_VTTK_TAB .
Structure for Shipment No., Packaging Materials and Date.
TYPES: BEGIN OF T_ITAB2,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P,
ERDAT LIKE YYLE0003-ERDAT, " created Date
COUNT TYPE I,
END OF T_ITAB2.
Structure for Shipment No. and Packaging Materials.
TYPES: BEGIN OF T_ITAB3,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF T_ITAB3.
--Internal table Declaration--
*Internal tables for the above Declared structures
DATA: G_VTTK_TAB TYPE TABLE OF T_VTTK_TAB,
G_ITAB5_TAB TYPE TABLE OF T_ITAB2,
G_ITAB4_TAB TYPE TABLE OF T_ITAB3,
G_ITAB3_TAB TYPE TABLE OF T_ITAB2. "#EC NEEDED
*Internal table Holding Shipment No.and quantity
DATA: BEGIN OF G_TOTAL_TAB OCCURS 0 ,
TKNUM TYPE YYLE0003-TKNUM, " Shipment number
QUANTITY TYPE P,
COUNT TYPE I,
END OF G_TOTAL_TAB .
*Internal table for selection screen data
DATA: BEGIN OF G_SCANDATA_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF G_SCANDATA_TAB.
DATA: BEGIN OF ST_SCANDATA_TAB,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF ST_SCANDATA_TAB.
DATA: BEGIN OF G_SCANDATA_COUNT_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
COUNT TYPE I,
END OF G_SCANDATA_COUNT_TAB.
DATA: L_COUNT TYPE I.
*Internal table for Packaging Materials and quantity
DATA: BEGIN OF G_ITAB6_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF G_ITAB6_TAB.
*- Field catalog
DATA: L_ALV_CAT1_TAB TYPE TABLE OF LVC_S_FCAT.
--Work area Declaration--
DATA: WA_VTTK TYPE T_VTTK_TAB,
WA_ITAB3 TYPE T_ITAB2,
WA_ITAB5 TYPE T_ITAB2,
WA_ITAB4 TYPE T_ITAB3,
WA_ITAB1 LIKE G_SCANDATA_TAB,
WA_ALV_CAT1 LIKE LINE OF L_ALV_CAT1_TAB.
----Variable Defnition -
DATA: G_CUSTOM_CONTAINER_0100 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
G_ALV_GRID_0100 TYPE REF TO CL_GUI_ALV_GRID,
G_CONTAINER_0100 TYPE SCRFNAME VALUE 'LIST',
G_MYLAYOUT TYPE LVC_S_LAYO, "#EC NEEDED
G_WA TYPE REF TO DATA.
DATA: G_VAR TYPE I, " No of records
G_VAR1 TYPE CHAR20. " Variable
--field symbols Declaration--
FIELD-SYMBOLS : <F_FS> TYPE TABLE,
<F_FS3> TYPE ANY,
<F_FS4> TYPE ANY,
<F_FS5> TYPE ANY,
<F_WA> TYPE ANY,
<F_FS15> TYPE ANY,
<F_FS16> TYPE SY-DATUM,
<F_FS2> TYPE T_ITAB2,
<F_FS6> TYPE ANY,
<F_FS7> TYPE ANY,
<F_FS12> TYPE ANY,
<F_FS13> TYPE ANY.
--Selection Parameters--
SELECTION-SCREEN: BEGIN OF BLOCK BLCK01 WITH FRAME TITLE TEXT-000.
"Select options
SELECT-OPTIONS :
S_TKNUM FOR YYLE0003-TKNUM , " Shipment number
S_YYREF FOR YYLE0003-YY_REFERENCE, " Packing reference
S_YYREFT FOR YYLE0003-YY_REFTP, " Reference type
S_EXIDV FOR YYLE0003-EXIDV, " External HU
S_MATNR FOR YYLE0003-MATNR, " Material number
S_VBELN FOR YYLE0003-VBELN, " SD number
S_POSNR FOR YYLE0003-POSNR, " Item number
S_LGTOR FOR YYLE0003-LGTOR, " Door for Wr Hs No
S_VHILM FOR YYLE0003-VHILM, " Packaging Mat
S_YYMEIN FOR YYLE0003-YY_MEINH, " Indicator for UOM
S_QUANTI FOR YYLE0003-QUANTITY, " Quantity
S_YCHECK FOR YYLE0003-YYCHECKED, " Destination_door
S_STATUS FOR YYLE0003-STATUS, " Packing status
S_STASHI FOR YYLE0003-STATUSSHIPTO, " Status on ship-to
S_LOADTR FOR YYLE0003-LOADTRUCK, " Load truck
S_ERDAT FOR YYLE0003-ERDAT , " Date
S_ERZET FOR YYLE0003-ERZET, " Entry time
S_AEDAT FOR YYLE0003-AEDAT, " Last changed on
S_ERNAM FOR YYLE0003-ERNAM, " Name of Person
S_AEZET FOR YYLE0003-AEZET, " Time last change
S_AENAM FOR YYLE0003-AENAM. " Name of person
SELECTION-SCREEN: END OF BLOCK BLCK01.
--INITIALIZATION--
INITIALIZATION.
Clear the variables and workarea
CLEAR :G_VAR,
G_VAR1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1.
--AT SELECTION-SCREEN--
AT SELECTION-SCREEN.
To validate the data entered in selection screen
PERFORM SUB_VALIDATE.
--START-OF-SELECTION--
START-OF-SELECTION.
*To fetch the data from table yyle0003
PERFORM GET_INPUT_DATA.
*To create the Dynamic Field Catalog
PERFORM GET_FIELDCAT.
To populate the data to final table
PERFORM GET_FINAL_DATA.
MODULE status_0100 OUTPUT *
MODULE STATUS_0100 OUTPUT.
*set title bar and PF status.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK SY-UCOMM IS INITIAL.
SORT G_SCANDATA_TAB BY TKNUM VHILM.
*Create object for Custom container
CREATE OBJECT G_CUSTOM_CONTAINER_0100
EXPORTING
CONTAINER_NAME = G_CONTAINER_0100
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
*Create object for ALV grid
CREATE OBJECT G_ALV_GRID_0100
EXPORTING I_PARENT = G_CUSTOM_CONTAINER_0100.
G_MYLAYOUT-GRID_TITLE = 'Display Scanning data'.
*Call method for table Display
CALL METHOD G_ALV_GRID_0100->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_OUTTAB = <F_FS>
IT_FIELDCATALOG = L_ALV_CAT1_TAB
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
User Interaction
MODULE USER_COMMAND_0100 INPUT.
CALL METHOD CL_GUI_CFW=>DISPATCH.
*To exit , back or cancel
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form get_input_data
This sub routine will get the data from yyle0003 table.
FORM GET_INPUT_DATA.
CONSTANTS: C_DOT TYPE C VALUE '.',
C_CHAR TYPE C VALUE 'D'.
CLEAR G_SCANDATA_TAB.
Get the data from yyle0003
SELECT VHILM " Packaging Materials
EXIDV " External Handling Unit
TKNUM " Shipment number
QUANTITY " Quantity
FROM YYLE0003
INTO TABLE G_SCANDATA_TAB
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
If VHILM contains any Decimal '.', replace it with D
LOOP AT G_SCANDATA_TAB.
REPLACE C_DOT WITH C_CHAR INTO G_SCANDATA_TAB-VHILM.
IF SY-SUBRC = 0.
MODIFY G_SCANDATA_TAB TRANSPORTING VHILM.
ENDIF.
CLEAR G_SCANDATA_TAB.
ENDLOOP.
*To get the Shipment No Creation date from VTTK.
SELECT TKNUM
ERDAT
FROM VTTK
INTO TABLE G_VTTK_TAB
WHERE TKNUM IN S_TKNUM.
SORT G_SCANDATA_TAB BY VHILM EXIDV. "TKNUM VHILM.
*To get the repeatition of Pacakaging material for each Shipment.
*--- to find the count of packaging materials under each shipment
LOOP AT G_SCANDATA_TAB.
READ TABLE G_SCANDATA_TAB INTO ST_SCANDATA_TAB INDEX SY-TABIX.
AT END OF EXIDV.
L_COUNT = L_COUNT + 1.
MOVE-CORRESPONDING ST_SCANDATA_TAB TO G_SCANDATA_COUNT_TAB.
G_SCANDATA_COUNT_TAB-COUNT = L_COUNT.
CLEAR: ST_SCANDATA_TAB, L_COUNT.
COLLECT G_SCANDATA_COUNT_TAB.
ENDAT.
CLEAR : G_SCANDATA_TAB.
ENDLOOP.
ENDFORM. " get_input_data
*& Form sub_validate
*This subroutine will validate the data eneterd in the selection screen
FORM SUB_VALIDATE.
*Varaiable declaration for Shipment number
DATA: L_TKNUM TYPE YYLE0003-TKNUM."#EC NEEDED " Shipment number
*- Condition will not qualify all primary key (IDENT)
SELECT TKNUM FROM YYLE0003 UP TO 1 ROWS
INTO L_TKNUM "wa_scandata
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE E987 . " No data found for these selection criterias
ENDIF.
ENDFORM. " sub_validate
*& Form get_fieldcat
Preparing Field catalog
FORM GET_FIELDCAT.
DATA: L_REF TYPE REF TO DATA,
L_I TYPE I. " Variable
CONSTANTS: C_CENTER TYPE C VALUE 'C'. " Center Justified
LOOP AT G_SCANDATA_TAB INTO WA_ITAB1.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB3.
APPEND WA_ITAB3 TO G_ITAB3_TAB.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB4.
COLLECT WA_ITAB4 INTO G_ITAB4_TAB.
*To sum up the qunatity field for each TKNUM.
AT END OF TKNUM.
SUM.
MOVE WA_ITAB1-TKNUM TO G_TOTAL_TAB-TKNUM.
MOVE WA_ITAB1-QUANTITY TO G_TOTAL_TAB-QUANTITY .
APPEND G_TOTAL_TAB.
CLEAR G_TOTAL_TAB.
ENDAT.
CLEAR : WA_ITAB1,
WA_ITAB3,
WA_ITAB4.
ENDLOOP.
*--- Begin of change - SKR.EXT - EBDK986377
SORT G_ITAB4_TAB BY TKNUM.
*--- End of change - SKR.EXT - EBDK986377
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
MOVE-CORRESPONDING WA_ITAB4 TO WA_ITAB5.
MOVE-CORRESPONDING WA_ITAB4 TO G_ITAB6_TAB.
*---- to get the count
READ TABLE G_SCANDATA_COUNT_TAB WITH KEY TKNUM = WA_ITAB5-TKNUM
VHILM = WA_ITAB5-VHILM.
IF SY-SUBRC EQ 0.
WA_ITAB5-COUNT = G_SCANDATA_COUNT_TAB-COUNT.
ENDIF.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
COLLECT G_ITAB6_TAB.
ENDLOOP.
CLEAR : WA_ITAB3.
SORT G_ITAB4_TAB BY TKNUM VHILM.
DELETE ADJACENT DUPLICATES FROM G_ITAB4_TAB COMPARING VHILM.
*To get the Number of fields to be displayed
DESCRIBE TABLE G_ITAB4_TAB LINES G_VAR.
L_I = '3'.
*Field catalog
WA_ALV_CAT1-FIELDNAME = 'TKNUM'(002).
WA_ALV_CAT1-COL_POS = 1.
WA_ALV_CAT1-COLTEXT ='ShipmentNo.'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
WA_ALV_CAT1-FIELDNAME = 'ERDAT'(003).
WA_ALV_CAT1-COL_POS = 2.
WA_ALV_CAT1-COLTEXT ='Creation_Date.'(005).
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
Create field catalog for each of VHILM
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
IF G_VAR >= 1.
CONDENSE WA_ITAB4-VHILM NO-GAPS.
WA_ALV_CAT1-FIELDNAME = WA_ITAB4-VHILM. "l_fieldname.
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = WA_ITAB4-VHILM.
WA_ALV_CAT1-JUST = C_CENTER. "'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
L_I = L_I + 1.
ENDIF.
*TOTAL-last column in the field catalog
AT LAST.
WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
WA_ALV_CAT1-JUST = C_CENTER. " 'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
ENDAT.
SORT L_ALV_CAT1_TAB BY FIELDNAME.
*Non of the field name should not get repeated
DELETE ADJACENT DUPLICATES FROM L_ALV_CAT1_TAB.
ENDLOOP.
SORT L_ALV_CAT1_TAB BY COL_POS.
*Creating Dynamic Internal table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = L_ALV_CAT1_TAB
IMPORTING
EP_TABLE = L_REF.
Assigning the Dynamic field Catalog to field symbol.
ASSIGN L_REF->* TO <F_FS>.
CREATE DATA G_WA LIKE LINE OF <F_FS>.
ASSIGN G_WA->* TO <F_WA>.
DELETE ADJACENT DUPLICATES FROM <F_FS> COMPARING ALL FIELDS.
ENDFORM. " get_fieldcat
*& Form display_data
FORM GET_FINAL_DATA.
*variable declaration
DATA: L_TOTAL TYPE I, " Row wise total
L_FILL TYPE I, " Count
L_TOT TYPE I. " Grand total
*To get the TOTAL qunatity in the last line of out put.
LOOP AT G_ITAB6_TAB.
CLEAR WA_ITAB5.
WA_ITAB5-TKNUM = 'TOTAL'(004).
WA_ITAB5-ERDAT = SPACE.
MOVE-CORRESPONDING G_ITAB6_TAB TO WA_ITAB5 .
LOOP AT G_SCANDATA_COUNT_TAB WHERE VHILM = G_ITAB6_TAB-VHILM.
WA_ITAB5-COUNT = WA_ITAB5-COUNT + G_SCANDATA_COUNT_TAB-COUNT.
ENDLOOP.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
CLEAR WA_ITAB5.
ENDLOOP.
DESCRIBE TABLE G_ITAB5_TAB LINES L_TOT.
*>>>>>>>>
****To get total qunatity of all TKNUM
LOOP AT G_TOTAL_TAB .
L_TOTAL = L_TOTAL + G_TOTAL_TAB-QUANTITY.
ENDLOOP.
*>>>>>>>>
*To assign ERDAT to g_itab5_tab
LOOP AT G_ITAB5_TAB INTO WA_ITAB5 .
READ TABLE G_VTTK_TAB INTO WA_VTTK WITH KEY TKNUM = WA_ITAB5-TKNUM.
IF SY-SUBRC = 0.
WA_ITAB5-ERDAT = WA_VTTK-ERDAT.
MODIFY G_ITAB5_TAB FROM WA_ITAB5 TRANSPORTING ERDAT.
ENDIF.
ENDLOOP.
*Assigning value in each field to respective Field symbols.
LOOP AT G_ITAB5_TAB ASSIGNING <F_FS2>.
CLEAR G_TOTAL_TAB-QUANTITY.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_FS2> TO <F_FS6>.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_WA> TO <F_FS7>.
<F_FS7> = <F_FS6>.
CONDENSE <F_FS2>-VHILM NO-GAPS.
ASSIGN COMPONENT 'VHILM' OF STRUCTURE <F_FS2> TO <F_FS3>.
ASSIGN COMPONENT 5 OF STRUCTURE <F_FS2> TO <F_FS4>.
MOVE <F_FS3> TO G_VAR1.
ASSIGN COMPONENT G_VAR1 OF STRUCTURE <F_WA> TO <F_FS5>.
<F_FS5> = <F_FS4>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_FS2> TO <F_FS16>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_WA> TO <F_FS15>.
WRITE <F_FS16> TO <F_FS15> .
Inorder not to display the date '00/00/000',
if there is no DATE .
IF ( <F_FS15> CP '00/*' )
OR ( <F_FS15> CP '00.*' )
OR ( <F_FS15> CP '00-*' ).
<F_FS15> = SPACE.
ELSEIF ( <F_FS15> CO ' / /' )
OR ( <F_FS15> CO ' . .' )
OR ( <F_FS15> CO ' - -' ) .
<F_FS15> = SPACE.
ENDIF.
READ TABLE G_TOTAL_TAB WITH KEY TKNUM = <F_FS6>.
IF SY-SUBRC = 0.
ASSIGN G_TOTAL_TAB-QUANTITY TO <F_FS12>.
ASSIGN COMPONENT 'COUNT' OF STRUCTURE <F_FS2> TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS13> + <F_FS12>.
L_TOTAL = L_TOTAL + <F_FS12>.
ENDIF.
L_FILL = L_FILL + 1.
IF L_FILL = L_TOT.
ASSIGN L_TOTAL TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS12>.
ENDIF.
AT END OF <F_FS2>-TKNUM.
APPEND <F_WA> TO <F_FS>.
CLEAR <F_WA>.
ENDAT.
ENDLOOP.
CLEAR: <F_FS6>,
<F_FS7>,
<F_WA>.
*Call the screen where Custom container is defined
CALL SCREEN 0100.
ENDFORM. " display_data
Regards
Kannaiah

Subtotal in Dynamic ALV

Similar Messages

Maybe you are looking for