Subtotal Text not displaying in ALV
Hi All,
Text Sub total is not displayed in my ALV output. Below is my code snippet.
Edited by: Manas@SAP on Jul 22, 2010 3:08 PM
Hi,
Through this way it is difficult to understand....try to make it more readable form.
Nevertheless,please visit the links:
1. http://wiki.sdn.sap.com/wiki/display/Snippets/DisplaysubtotaltextinALV+grid
2. http://help.sap.com/saphelp_bw/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
3. Passing the Total/Subtotal Text in ALV
These links gives you the idea about the subtotal_text.
May this info helps you.
Regards.
DS
Similar Messages
-
Field of character length 255 not displaying in ALV output
Dear all,
i am trying to display a field of ztable with lenght 255 character, same is not displaying at ALV output.
it is displaying only upto 128 characters in ALV output.
table is Ztable-zfield with CHAR255 length.
please help me.
Regards,
Sam.Hi Sam Johny,
In ALV Grid the maximum characters can be displayed in one column is 128 Characters..
But for your solution you can press Print Preview Button to view more text(or Press Ctrl + Shift + F10 )...
Else try with ALV LIST
and pass FIELDCAT-OUTPUTLEN = '255' for field in fieldcatalog
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
Flash Text not displaying certain fonts
Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fontsFodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com -
Why won't voice generated text not display as I speak?
Why won't voice generated text not display on the screen as I speak?
All you get in 10.6.5 is spoken COMMAND recognition.
Dictation requires 10.8 Mountain Lion or later:
Mac Basics: Dictation lets you speak text instead of typing -
Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?
Hi,
I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
METHODS:
display IMPORTING l_table TYPE string
l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
DATA: gr_table TYPE REF TO cl_salv_table.
DATA: gr_columns TYPE REF TO cl_salv_columns_table,
gr_column TYPE REF TO cl_salv_column_table,
ls_fcat TYPE slis_fieldcat_alv.
DATA: gr_display TYPE REF TO cl_salv_display_settings.
DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
l_field TYPE string.
FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
<ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
ASSIGN (l_table) TO <fs_table>.
ASSIGN (l_fcat) TO <ft_fcat>.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = <fs_table> ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
Add basic default functionality in the ALV report
Functions
l_o_functions = gr_table->get_functions( ).
l_o_functions->set_all( abap_true ).
gr_columns = gr_table->get_columns( ).
gr_columns->set_headers_visible( abap_true ).
Display the list
gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
get_storecodes USING p_stfile
CHANGING it_t001w,
fetching mard data
read_mard_data,
preparing fieldcatalog for Final Data
create_filedcat USING it_t001w
it_site
CHANGING it_fieldcat,
preparing structure & internal table for Final Data
create_final_table_structure USING it_fieldcat,
prepare output data
prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
display_data USING l_table
l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = lt_raw
i_filename = p_p_stfile
TABLES
i_tab_converted_data = p_it_t001w[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
l_index = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = <fs_t001w>-werks
IMPORTING
output = <fs_t001w>-werks.
MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
append site to ranges
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = <fs_t001w>-werks.
APPEND rs_site TO rt_site.
CONTINUE.
ENDIF.
ENDLOOP.
SORT p_it_t001w BY werks.
SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
p_it_site LIKE it_site[]
CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
'MTBEZ' 'CHAR' '25' ,
'MATKL' 'CHAR' '6' ,
'WGBEZ' 'CHAR' '20' ,
'MATNR' 'CHAR' '18' ,
'MAKTX' 'CHAR' '30' ,
l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
'Divsion Description',
'MC Code',
'MC Description',
'Article',
'Article Description',
l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
<fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
CLEAR : l_fieldname, rs_site.
l_fieldname = <fs_site>-werks.
prepare fieldcatalog
PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
create header for excel
PERFORM create_excel_header USING l_fieldname .
CONTINUE.
ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
p_datatype TYPE datatype_d
p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
l_werks LIKE g_werks,
l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
l_index = sy-tabix.
IF l_matnr IS INITIAL.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSEIF l_matnr <> <fs_mard>-matnr.
APPEND <fs_final> TO <ft_final>.
CLEAR l_matnr.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSE.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
ENDIF.
IF l_index = g_lines.
APPEND <fs_final> TO <ft_final>.
ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
<fs_t023t> LIKE LINE OF it_t023t,
<fs_t134t> LIKE LINE OF it_t134t,
<fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-mtart.
ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-matkl.
READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_makt>-maktx.
ENDIF.
READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t023t>-wgbez.
ENDIF.
READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t134t>-mtbez.
ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
text
FORM display_data USING p_l_table
p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
l_fcat = p_l_fcat ).
ENDFORM. " display_dataI don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
call method set_colname
EXPORTING iv_tab = alv_tab
iv_colid = 'xxxx' "fieldname from the table
iv_stxt = text-t54
iv_mtxt = text-t55
iv_ltxt = text-t55.
METHOD set_colname .
data:
alv_cols type REF TO cl_salv_columns_table,
alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
IF iv_stxt <> ''.
CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
ENDIF.
IF iv_mtxt <> ''.
CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
ENDIF.
IF iv_ltxt <> ''.
CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
ENDIF.
CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname -
Sub total icon is not displaying in alv report output
Hi friends ,
In alv report display on menu bar the icon : subtotals is not displaying at the output , I should not give subtotal in each field catalog .
Plz give me solution, points will be rewarded.
with regards,
prasad.Hi,
I think u r using PF-STATUS parameter in function module,
if u use this parameter, you sholud give the icon name etc..
otherwise by default it will appear.
Check your code again.
Give me exact requirement, if possible paste the code.
Regards,
Chandu -
Text not displayed in the Web Report
Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
SrinivasI juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas -
PO Material text not displayed in PO
Hi All,
Please help me in finding a solution for my issue,
We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
Any help is much appreciated.
Thanks
VinothNabheet, Thanks for your response.
I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
Vinoth -
Arabic text not displaying correctly in Win Server 2008 R2
Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang -
Info Record Text and Material Text not displayed in Subcon. PO printout
Hi,
I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
Also the Info record text for standard Purchase order is displayed in Print preview and Print output.
The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
I have checked the config for copying rule, for Info record text is automatically adopt.
I am unable to identify the missing config for this.
Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
Please let me have your inptus,
Regards, MuthuvelThe solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
->Text for Messages->Define Text for Purchase Order.
Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message. -
Text not displaying on components
I have one swf file where im using the default textInput and
button components. Just so the user can enter a zip code and click
submit. When i publish that swf, everything looks fine. The problem
is that i am loading that swf into a master swf and when i view it
through the master swf, it displays the components without text.
The submit button is blank, it should say 'submit' on it, and no
characters display when you type into the textInput component. I am
able to type characters and submit the form, but i can't see what
im typing. I've tried messing with embedding fonts in the child swf
as well as the master to no avail. If anyone has any suggestions,
they would be greatly appreciated.Here's how to talk to your dynamic text box. Where you put
this bit depends
on how you are building the preloader, but since you say the
progress bar
works fine, I'll assume you know what you're doing there and
will be able to
get this in the right spot.
// variable that calculates a number for the percent loaded
preloaded = Math.floor((loadedBytes/totalBytes)*100);
// this line is talking to a dynamic text box named
"percentage_txt" that is
inside a movieClip named "preloader_mc" on the root timeline
// depending on your setup the path may be different, but
make sure
everything on the way to the text box is named
_root.preloader_mc.percentage_txt.text = preloaded + "%";
// You've probably left out the ".text = " bit. Just a guess,
but that's
the bit I always find
// I've left out when I'm having trouble with dynamic text.
// Also make sure your text color is not set to the same
color as your
background. Duh.
Good luck.
--KB
"patbegg" <[email protected]> wrote in
message
news:ejuu12$bmd$[email protected]..
> Hi,
> Cheeky little problem. I cannot get the dynamix text to
show on the
> preloader
> of a loaded movie. I am calling in a .swf which has a
preloader in it, the
> progress bar is fine but the text showing the percent
will not display.
>
> I have tried the _lockroot method, but no joy. Any ideas
anyone?
>
> Any help appreciated guys.
>
> Cheers,
> Pat
> -
TextArea text not displayed correctly with ImageSnapshot
I am having an issue with the ImageSnapshot.captureImage command capturing the text in a TextArea. Attached are two files illustrating the issue. The "screenshot.jpg" pic shows how the TextArea controls are displayed on the screen. The "created jpg.jpg" pic shows how the text is displayed in the jpg that is created. Below is the code that creates the snapshot, everything is pretty standard there as far as I can tell. The text is obviously not sized the same from one to the other. Any ideas whats going on here or what I can do to correct it?
var myencoder:JPEGEncoder = new JPEGEncoder(50);
var imgss:ImageSnapshot = ImageSnapshot.captureImage(viewstack.selectedChild, 100, myencoder);
var fs:FileStream = new FileStream();
var ssfile:File = File.applicationStorageDirectory.resolvePath("ProjectImages/snapshot.jpg");
fs.open(ssfile, FileMode.WRITE);
fs.writeBytes(imgss.data, 0, imgss.data.length);
fs.close();
Thanks,
ScottScott,
Can you file a bug? http://bugs.adobe.com/flex
Thanks,
Jason -
OTR text not displayed correctly
Hi,
I have view in which there are 3 tables with 3 colums each.
All the data binding etc is fine and it is displayed correctly in the portal.
My issue is with the OTR texts maintained. The text for column headings in the table is binded with the OTR texts (created through transaction sotr_edit) $OTR:<package>/<alias> in properties value field.
We have an option to change the language in the portal. So when a language is selected, the texts for these column heading is displayed in the corresponding language selected.
But for some langauges selected, the texts show some random language instead of the one selected.
Any idea on how this can be corrected.Thanks for the reply Thomas.
And sorry for delayed reply.
I could see that the binding of the OTR was not correctly done with the texts.
After i made the changes, the languages were displayed correctly.
My concern here is that i have made the changes as this is a custom development and the issue was solved.
But this same issue is seen in a standard component where the text was not displayed in the language selected and this issue is coming only for the users assigned to a particular role. And for all others, the texts are displayed with the language selected.
Any inputs on this would be helpful.
Thanks. -
Public Holiday text not displaying in PT03 (Special Days)
Hi Experts,
For my client, I have to configure a public holiday and restrict it to only few WSRs. This public holiday is not part of any public holiday calendar. I have configured this holiday as a special day by defining the day type selection rule & special day.
When I checked the work schedule in PT03, it is not displaying the holiday class and the text of the public holiday. It is only displaying the day type for this day.
Please help.
Many Thanks for your help in advance.
Warm Rgds,
Arun.MqPane = new JScrollPane(qTextArea);
qPane.add(qTextArea);
performedOpsPane = new JScrollPane(performedOpsTextArea);
performedOpsPane.add(performedOpsTextArea);
logPane = new JScrollPane();
logPane.add(logTextArea); When you create a scrolled component, you either pass the component to the JScrollPane constructor or add it afterward, not both. If you're going to add it afterward, you use the setViewportView() method, not add(). -
Full Text not Displaying in table
Hi Experts
I am displaying Long text in Text elements in table But It is not displaying full Text only Half of text is displaying.
How to overcome this? Is there any length limitation for text elements in table.
and Variable type is STRING
i am concatenating lines from Read text FM.
Regards
Jagadish
Edited by: acj_vy on Aug 17, 2010 10:23 AMHi,
You should not concatenate the text into string which you read using READ_TEXT.
You should loop at the table and then display the text using work area of the table.
It will be displayed line by line as it is getting displayed in your standard transaction.
Thanks,
Archana
Maybe you are looking for
-
The Attempt to burn a disc failed. An unknow error occurred (4000)
Itunes will start to burn and then stop and state that "the Attempt to burn a disc failed. An unknow error occurred (4000)" while burning a data Dvd back up Here is the Run CD Diag Microsoft Windows XP Home Edition Service Pack 2 (Build 2600) MSI MS-
-
Inbound IDoc SHPCON - Batch update issue
Hi all, I would like to use SHPCON.DELVRY03 idoc in order to update Outbound delivery document. Scope is : - picking - good issue - update batches - update serial numbers - update volume and weights We met issue on update batches a soon as one docume
-
Photoshop elements 4 HELP with layers with layers
hello all I got photoshop elements 4 not to long ago and ive been playing with it but i just cant seem to grasp how to use layers.I would really appreciate any help anyone can suggest.Is there anywhere i can watch someone use layers? That would reall
-
Hi There, Any one can tell me what is the location for initSID.ora in Apps
Hi There, I've to perform some task with initSid.ora can any one help me with the location. Thanks Bachan
-
Update to Photoshop CC (14.1) crashes
I just ran the update to PS 14.1 and it crashed ('update failure', Win7/64). Now PS won't start anymore ('invalid nternal file signature'). How do I fix that?