Subtype event not triggering and supertype event triggers twice!!!!!!

Hi,
We have created a subtype for object bus2030 and also an event created for that. My workflow should trigger whenever an inquiry is created.
I've maintained this as triggering event in SWDD and done type linkage is SWE2 and everything looks fine.
When i simulate or create event the WF is triggered but when create inquiry in VA11 WF does not triggers.
I've checked SWEL for event trace but no event is triggered at all... Am i missing something... I've done almost everything that i used to do...
Even synchronized buffer!!! nothing paid me a solution...
Infact the same was working with 3.1i system but after migration to ECC6 we had to create new WF template for the same Process.
Now I also see that the supertype bus2030-created event is triggered twice but, obviously no receiver type exists. But the zbus2030 event is not being triggered at all!!!!
Kindly help me understanding my mistake...
Regards,
PB

Hope you have already set the deletegation in SWO6.
Now, event dont get triggered automatically, jus because they are defined in object. They have to be explicitly published in thesystem.
Check for a suitable user exit in your transaction, which makes use of function module to create the event, from that you know how to proceed.
If you dont find user exit, try other triggering techniques such as change documents, logistics, BTEs... etc.
regards,
Sandeep Josyula

Similar Messages

  • Fork : triggering and terminating event ?

    Hi Experts,
    I am a begginer in  Workflow ..
    I just want to know how Fork can be used for paralled processing with triggering and  terminating event.
    It would be appreciated if provided with some scenarion in detailed steps.
    Thanks in advance.
    Ganesh..

    Mike,
    It would be HELPFUL for me if i get my problem solved as earlier so i can concentrate on other my commited topics..thats why expecting info., from the experts.
    Anyway , you  triggered me to read SAP help..thanks for the indirect motivation..
    Let me start reading the SAP help information!!!
    Thanks .
    Ganesh

  • Can not delete and modify events

    Sun Java System Calendar Server 6 2005Q4 (built Jul 21 2005)
    I have created a new event in my calendar but I can not delete and modify event.
    Everyone on this system have same problem.
    How do I do ?
    Regards,
    JO.

    I did not see any errors in log directory.
    # showrev -p | grep ics5
    Patch: 116577-24 Obsoletes: 117706-08 Requires: Incompatibles: Packages: SUNWics5, SUNWica5
    Patch: 117860-16 Obsoletes: Requires: Incompatibles: Packages: SUNWics5, SUNWica5
    Patch: 118186-16 Obsoletes: Requires: Incompatibles: Packages: SUNWics5, SUNWica5
    # ./csdb check
    Checking the database health condition.
    Please be patient, this may take a while...
    Start by scanning components db...
    Scanning events database...
    102 events scanned
    102 events copied
    Scanning todos database...
    10 todos scanned
    10 todos copied
    Scanning deletelog database...
    14 deletelog entries scanned
    Scanning gse database...
    0 gse entries scanned
    Scanning recurring database...
    0 recurring entries scanned
    Successful components db scan
    Now starting calprops db scan...
    Scanning calprops database to uncover events...
    326 calendars scanned
    Scanning calprops database to uncover todos...
    finished...
    Calendar database consistency check completed successfully
    Regards,
    JO.

  • How can I display event notes on the relevant event in week/day view?

    Hi folks,
    I'm looking for a way to display the event notes on the actual event in week or day view.
    This will greatly help plan out my week (especially for repetitive events with custom notes for each occurrence).
    I can understand that Apple ommitted this feature to avoid clutter on short-duration events perhaps?
    Clicking on the event (or using the Inspector) to see the notes is not an option. I need an overview that can be viewed at a glance or even printed.
    Looking forward to your suggestions...
    Trev

    Hi Trev,
    With iCal as it is the only suggestion I have would be to add the full text to the title of the events.
    FYI, this is a user to user forum. By posting here you are not guaranteed someone from Apple will read it. If you'd like Apple to know about this I suggest you send them feedback.
    Best wishes
    John M

  • DCOM Event ID 9 and kerberos Event ID 4 in SCCM Primary server

    I could see  that DCOM Event ID 9 and kerberos Event ID 4  is continously happening for  workstations in SCCM Primary Servers.Why this is happening..

    Yes, I know this is an old post, but I’m trying to clean them up.
    Why do you think this is a CM07 issue?  A quick Bing search suggest this is an AD issue and has nothing to do with CM07.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Difference between rew level triggers and statement level triggers

    Hi All
    I would like to know the exact difference between rew level triggers and statement level triggers.Please provide me with an example.
    Thanks
    Anand

    What is difference between row & statement?
    One statement can change many rows.
    Difference determines how many times the trigger fires or under what conditions.

  • Two events not showing up in Events sidebar of iMovie

    Hi, I'm currently using iMovie 10.0.7 on my 13" MacBook Pro and I discovered that I am missing two movies, which I imported sometime late January or early February. When I tried to re-import the clips, iMovie said that there already was an existing file with the same name. I went to the iMovie Library and CONTROL-Clicked to checked the package contents. The videos are there but I can't view them on the events sidebar of iMovie.
    How do I make these videos visible on the Events sidebar? All my other movies are there except these two, did I hide them by accident? Can anyone help?
    Thanks!

    The Event directory contents looks normal.  I can only think that there is something wrong in the .imovieevent files.  These are SQLite databases describing the event contents but I can't interpret them.  
    I think the only thing you can do is to create 2 new events and re-import the media into them.  You should be able to do this quite quickly for each event by selecting everything in the original media folder and dragging and dropping them into the event pane of the new event.   I think you will have to re-create the projects though.  The events will also be missing anything that had been imported from your iTunes or iPhoto library.
    [If you want to be really adventurous change the new event names from within iMovie to the same as they were before and it is just conceivable that the projects using them may re-appear but the presence of the old versions may complicate matters - you would probably have to delete them first from the library.  Unless you have invested a lot of effort in projects using these events I would not recommend trying this and if it goes wrong I won't be able to help you.  Make first a backup of your library as you may well break the whole library.]
    Geoff.

  • New Events Not Showing Up In Events But In Last Import

    I have a peculiar problem. I decided to move my iPhoto library to my external HDD, as my old trusty MacBook is going to my wife, but I don't want to put my personal photos (all 174Gb of them) on my new company owned MBP. The external HDD was the solution...or so I thought. I did this over the weekend, expecting NEW events to be listed under Events.
    Not so, thus far. All of my new events, my almost 1600 photos I have taken for the new year, have been placed in Last Import. I see them, without problem there, but I want them in Events. I even did a further importation of photos, after the 1600 import, and everything is still listed under Last Import. I feel like I should have just started a new library and have the old one as archive or something. I am not happy, but I could be if I could find out how to move the Events under Last Import (because I manually sorted the photos and put them into different Events).
    Please advise me what I could or should do. I feel like starting over with a new library altogether, which I would prefer not to do.

    Please do now worry about it. I found the answer. I knew the photos had been there the whole time, but just couldn't find the Events. What you do is
    In Last Import, select a photo
    Right-click on that photo and select the option "Show Event"
    You will note that the sidebar will suddenly have shifted you from Last Import to Events.
    When you go to All Events, you will see that all of your Events are there, as they were manually named.
    To be sure, in case you don't see them, on the menu bar, click on View>Sort>by date, or however you wish for them to be sorted.
    I hope it helps. It helped me.

  • Events not showing up in Event Library

    I have been working on importing a bunch of video from my DV camera and all has gone well up to this point. The next time I opened iMovie my events did not show up in the event library. When I look on the Finder I still see the clips in the iMovie event folder, but they are not in my event library. All I see in my event library is my iPhoto video and an option to open the Last Import (although nothing is there). Even when I import new video now, I can still find it in the finder, but not in the iMovie event library.

    Talked to Apple support- we figured it out. In case anyone has the same problem: one of my events in the iMovie events folder was corrupted, once I deleted that file, all was well.

  • Overlapping events between months and extra events added by iCal

    Aloha, everyone.
    My wife is the primary iCal user and often syncs between the iMac and her iPad. She's a private tutor and has a ton of calendars operating in iCal for each of her students.
    Two problems:
    1) for this summer, July is giving us problems. We forward to August, and when clicking back, it won't go to July. I click again and it will go to June. However, some events from August overlap June events. In other words, I can read two events in the same spot.
    2) iCal will add additional copies of the same event on the last Sunday of the month for the previous month. Say the event is "buy apples" on June 27th. When I go to July's calendar, June 27th still shows and it will have 3 additional "buy apples" events.
    This is driving my wife nuts. Any help?
    Thanks!

    I have the exact same problem as what you described. I made a backup of iCal and then tried to experiment by turning all calendars off to find out when I could get from August directly to July again instead of going two steps back to June and one step forward to July. I thought that certain events were the cause but that does not seem to be the case. In one instance I reached a point where one event could not be erased at all.
    There are events that will still show when the corresponding calendar is turned off. Those will show in every month you switch to and cause the overlap. Clicking on that event will turn the corresponding calendar back on again and the "ghost" events will then disappear, at least temporarily.
    Since so many of us are having the same problem someone needs to alert Apple that there is a serious bug here. It is making iCal almost unusable and certainly not trustworthy enough to be deployed in a business environment.
    I hope there will be a bug fix soon.

  • What is Triggering and Handling Events  in ABAP  OOPs

    Gowri

    ) TYPE type ..
    To declare static events, use the following statement:
    CLASS-EVENTS ... ...
    It links a list of handler methods with corresponding trigger methods.  There are four different types of event.
    It can be
    ·        An instance event declared in a class
    ·        An instance event declared in an interface
    ·        A static event declared in a class
    ·        A static event declared in an interface
    The syntax and effect of the SET HANDLER depends on which of the four cases listed above applies. 
    For an instance event, you must use the FOR addition to specify the instance for which you want to register the handler.  You can either specify a single instance as the trigger, using a reference variable
    After the RAISE EVENT statement, all registered handler methods are executed before the next statement is processed (synchronous event handling).  If a handler method itself triggers events, its handler methods are executed before the original handler method continues. To avoid the possibility of endless recursion, events may currently only be nested 64 deep.
    Handler methods are executed in the order in which they were registered.  Since event handlers are registered dynamically, you should not assume that they will be processed in a particular order. Instead, you should program as though all event handlers will be executed simultaneously.
    "Example  :
    REPORT demo_class_counter_event.
    CLASS counter DEFINITION.
      PUBLIC SECTION.
        METHODS increment_counter.
        EVENTS  critical_value EXPORTING value(excess) TYPE i.
      PRIVATE SECTION.
        DATA: count     TYPE i,
              threshold TYPE i VALUE 10.
    ENDCLASS.
    CLASS counter IMPLEMENTATION.
      METHOD increment_counter.
        DATA diff TYPE i.
        ADD 1 TO count.
        IF count > threshold.
          diff = count - threshold.
          RAISE EVENT critical_value EXPORTING excess = diff.
        ENDIF.
      ENDMETHOD.
    ENDCLASS.
    CLASS handler DEFINITION.
      PUBLIC SECTION.
        METHODS handle_excess
                FOR EVENT critical_value OF counter
                IMPORTING excess.
    ENDCLASS.
    CLASS handler IMPLEMENTATION.
      METHOD handle_excess.
        WRITE: / 'Excess is', excess.
      ENDMETHOD.
    ENDCLASS.
    DATA: r1 TYPE REF TO counter,
          h1 TYPE REF TO handler.
    START-OF-SELECTION.
      CREATE OBJECT: r1, h1.
      SET HANDLER h1->handle_excess FOR ALL INSTANCES.
      DO 20 TIMES.
        CALL METHOD r1->increment_counter.
      ENDDO.
    The class COUNTER implements a counter. It triggers the event CRITICAL_VALUE when a threshold value is exceeded, and displays the difference. HANDLER can handle the exception in COUNTER. At runtime, the handler is registered for all reference variables that point to the object.
    Reward  points if it is usefull ...
    Girish

  • How set ctrl +a event for Jbutton and esc event for closing jinternal frame

    i am doing desktop project in that i need set ctrl event for button ,i am strucking in that area pls anybody help me to overcome this problem ,and also i need button in table when i press button it has to fill value in the next field ,its urgent please

    Read the section from the Swing tutorial on [How to Use Key Bindings|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html]

  • Cant change profiles as code /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager says its not recognized and ive restarted it twice to make sure its closed

    Cant change my profiles and the code /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager as stated on the page doesnt work..It says -bash: /Applications/Firefox.app/Contents/MacOS/firefox-bin: No such file or directory...I cant create a new one or manage them cause of not allowing in the profile area..
    == This happened ==
    Every time Firefox opened
    == i typed it in and it stated it was not recognized

    An update.
    I almost never use TFF24 so I haven't really been testing this.  However, I did have an issue with TFF17 where it crashed or something.  When I restarted TFF17 it had somehow decided to start using my TFF24 profile.  No real harm there other than puzzlement, and I was missing all my plugins and extensions.  Fortunately I keep the profile switcher extension in both profiles so I used it to switch back to my TFF17 profile.  A few days later I needed to use TFF24.  When I tried starting it with TFF17 still running it did not start up but gave me the old warning about not being able to run two versions of Firefox.  I quit TFF17, started TFF24 and it started up using my TFF17 profile.  Of course then it ran an extension compatibility check, found the "outdated" ones and removed them from the profile!  They were still gone when I restarted in TFF17.   An add-on check said one of them (Classic Compact) only had a Firefox20+ version available until I did some real web searching and finally found a page with the older version.  By the way, simply copying the extensions folder from a profile backup does not seem to install a full suite of extensions, you have to do the full profile.
    Observations:
    - If you do this, keep a profile switcher add-on in both copies of TFF.  Select it to always display at startup which is annoying but not a huge amount of labor to click through.  That way you can make sure each version is starting with the correct profile.  I also installed an add-on which stops TFF from doing an add-on compatibility check when starting, just in case.  It is easy to toggle on and off if you really want one done.
    - Of course right now I don't have capability to keep both versions running at the same time unless I go back and set it all up again, but at least I can have two different versions for when I need to run the newer one.

  • Trigerring and Terminating Events in Task

    Hi Friends,
    Acutallly i need to know whats the use of triggering and terminating events in Tasks and in what kind of scenerios they are required..
    THanks

    Hi Munish,
    Please check this thread
    Triggering Events and Terminating Event
    Please check this thread exclusively for Terminating events. Lots of information in this thread..
    Regarding terminating events in workflows
    Hope this would help you.
    Good luck
    Narin

  • WebDynpro iViews and Portal Eventing

    Hi All,
    I am planning to prepare a proof of concept with following requirements.Can you please give me hints and resources to prepare this in 2 days?
    1)Interaction between iViews using EP eventing.
    2)Exploring how and what kind of data can be passed from one iView to the another (String , Java Objects etc)
    3)Keeping track of various events of EP especially finding out if we can track when the user session is invalidated by the Portal so that we can free objects from memory.
    4)The sample code should have 2 to 3 iViews interacting with each other and passing data.With detailed description of each steps from coding till deployment to the EP.
    Thanks & Regards,

    Hi Noaman,
    You can use EPCM for eventing between iviews in portal. Also we can use the same for communication between Webdynpro and EP applications.
    You can pass parameters using client data bag. The code for sender ....
    var an='Hello';
    EPCM.storeClientData("urn:namesapce","key",an);
    EPCM.raiseEvent("urn:namesapce","eventname");
    Code at the reciver....
    function fn_selection()
    var info=EPCM.loadClientData("urn:namesapce","key");
    document.myform.name.value=info;
    EPCM.subscribeEvent("urn:namesapce","eventname",fn_selection);
    This is the javascript code for triggering and subscribing  events in between iviews.
    Hope this Helps
    gEorgE

Maybe you are looking for