Subtype for IT0105

Hi Expert,
I am creating a new subtype 9000 for infotype 0105. But I found that the field is using "USRID", but I would like to use "USRID_LOING".
Could you please let me know how to do this?
Thanks,
WF

Hi,
Mark it respectively in table V_T591C
Cheers!

Similar Messages

  • Error while creating a subtype  for object bus2005

    hi experts,
    i am trying to create a subtype for BUS2005
    when i create IFSTATUS under interfaces for the created subtype of BUS2005
    and try to REDEFINE it i am getting an error
    "Composite Definition not allowed for local elements"
    (i am saving this under local object.)

    Hi,
    I have the same problem.
    Could You tell me witch is the correct origin?
    Thanks a lot!
    Bye
    Laura

  • Creating subtype for Infotype.

    Hi ,
    I have created a customInfotype following the steps below:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    In thread Infotype the following method is given to create subtype for Infotype.
    <b>Subtype Creation :</b>
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    But I am having no option to create subtype from PM01.
    Please guide on this.
    Thanks&Regards
    Ananya
    Message was edited by:
            Ananya Mukherjee

    Hi,
       What you are trying to do is to modify a Standard ( delivered by SAP ) object. This would obviously not be allowed all that easily. You will have to contact SAP and obtain what is known as an access key. You would then be able to modify the object. This stipulation makes it explicit that SAP is not responsible for any problems that you may encounter by changing the standard functionality.
    There is, however, an exception to this. We have something called user-exits in sAP. These are the places in the code where SAP has given the customer an option to include some custom functionality within the standard functionality. That is because SAP thinks that these are the points where customer-specific functionality is most likely.
    Hope you can now see the point. If you want to modify PM01, you have to either search if an appropriate user-exit is available, or you have to contact SAP to obtain the access key.
    <b>Reward points</b>
    Regards

  • Creation of subtype for IT 0016

    Hi
    When I am selecting IT 0016-Contract Elements in PA30, I am not getting any values in the sybtype field. How can I create subtype for contract ?
    I have already created contract types.
    Thanks
    Rajesh

    Hi Rajesh,
         There are no subtypes for the IT0016, and there is no need of creating Subtypes too. The thing is just click on create button by giving the pernr and  choose the required Contract type that present in the combo box. Thats it.
    PS: Don't forget to reward points if I some how helped you.
    Thanks & Regards
    Hari.

  • Creation of subtype for custom infotye

    hi,
    I have a requirement to create a subtype for custom infotype for particular fields and same fields can be able to see in T-code pa30 for corresponding infotype and subtype .
    Kindly tell me the steps or proceedure to create subtype.
    Thanks in advance
    Shweta

    hi,
    you can achieve this using PM01 transaction and some functional configuration.
    for more details search in ERP HCM Forums.

  • Creation of subtype for Infotype 128

    Hi All
    What is the IMG path for  creation of subtype for Infotype 128?
    Regards
    Ritu

    Hi Ritu,
    Goto SM31 -> V_T591A : Infotype : 0128.
    Regards,
    Dilek

  • How to define default subtypes for Infotype 0105 on entry

    Hello;
      I have spend an entire day trying to look into PA configuration to determin how to make specific Subtype of the 0105 Communication Infotype automatically appear when an HR person is entering in a new employee.
    Currently we have the 0001, 0010, and ADP subtypes automatically appear in the Communication Infotype screen when the person is entering in a new employee.  I was asked to create three new Subtypes for Infortype 0105 and have these new subtypes automatically appear on the data entry screen for Infotype 0105.
    I can not find anywhere in configuration how to do this.  I ahve burnt an entire day searching configuration and have about had it with this garbage.
    Can someone please point me to specific spot in configuration where these subtypes of and Infotype can be identified as default data entry screens.
    I would greatly appreciate any help ... since I am not a HR Configurator ... just a plain old ABAP'er who has lost our configurators.
    Scott.

    Hi Scott,
    To create subtypes follow:
    Tcode: SPRO
    Path: Personnel Management>Personnel Administration>Communication>Create Communication Types
    Half the job is done. Then include those subtypes in your hiring action. To do so:
    Tcode: SPRO
    Path: Personnel Management>Personnel Administration>Customizing Procedures>Actions>Define infogroups>Info group
    Select your hiring infogroup and create new entries with operation INS for 105 and the three subtypes.
    You are all set!
    Cheers,
    Donnie

  • Custom Subtypes for IT0021 not appearing in ESS

    We are in ECC 6.0 and using custom subtypes like FM01 - FM06 for IT0021 (Family Member/Dependents). Now we are doing ESS implementation and we are not able to display Family details through ESS.
    I have maintained the subtypes in table V_T7XSSPERSUBTY.
    Our country grouping is 99 and for IT0021 we are using Russian Country screen and completed  relevant configurations changes for the same.
    Dear Friends, Can anyone guide me what extra changes I need to make for the Custom Subtypes (for IT0021) to appear in ESS.
    Thanks in advance for your help.
    Preethi

    Hi again
    One thought:  There are 2 IMG nodes for Defining possible family members - in addition to V_T7XSSPERSUBTYP.
    This is already maintained in our installation, as we are now doing an upgrade. 
    And all I did for upgrade, was entering data into V_T7XSSPERSUBTYP.
    Check out if you need the entries in both the IMG nodes as well.  It should not be necessary to code anything to get the subtypes in ESS.
    Personnel Management>Personnel Administration>Personal Data>Family>Personal Data>Family Types>Define Possible Family Members. 
    Br
    Kirsten

  • How can we create subtypes for om custom infotypes

    hi,
        I want the detailed procedure how to create Subtypes for Organzational management custom infotypes.
        Pls send me the detailed path how to create Subtypes for Org management.
    thanks & regards,
       Sekhar.

    Access transaction SM30/31 for table maintenance. Enter view name V_778U.
    Select maintain and enter the subtype for the custom infotype.
    Also remember to enter the time constraint for the subtypes mainatined in table T777Z.
    SPRO Path
    Personnel Management --> org management --> basic settings --> data model enhancement --> infotype maintenance --> maintain subtypes.
    Regards
    Ravikumar

  • How to create Subtype for an Infotype

    Hi,
    Can you please help or guide me to "create Subtype for an Infotype"..
    Eg: I need to Create for IT0009 a Subtype...
    Regards,
    Spaul

    Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the u2018Employee Infotypeu2019 radio button.
    4) Select the u2018PS Structure Infotypeu2019.
    5) Click on Createu2026 A separate table maintenance window appearsu2026
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on u2018Allu2019 push button. It takes a few moments.
    10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
    11) Click on u2018Changeu2019(pencil) button
    12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
    13) Give u2018T591Au2019 as subtype table
    14) Give u2018T591Su2019 as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
    18) Click on u2018Changeu2019 (pencil) button
    19) Click on u2018New Entriesu2019
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirementu2026
    25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
    27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Donu2019t forget to u2018Activate at every level)

  • How do I create subtypes for infotype 0015

    hi Gurus
    kindly guide
    How do I create subtypes for infotype 0015
    regards

    For example, I want to create a subtype "Additional Monthly Payamentt" of infotype 0015.
    subtype of an infotype
    infotype 0015
    under this I want to create a subtype of it
    hope it'll help now

  • Creating subtypes for description infotype(1002) in OM

    Hi,
    How can we create subtype for infotype 1002(Description) in OM?
    With Regards,
    Kaustuv Goswami.

    Check if you have defined your subtype for all the object types. This can be done by defining the object type as required(if you want the description for a position, put the object type as S, if it is for Org Unit as  "O" etc) in table T777Z.
    Hope this helps.
    K

  • Creation of subtype for Infotype 1001

    Hi all
    My client wants two reporting realtionship ( like A002) to be done. So I tried through Matrix which i was unable to do so.
    I tried to solve this problem by copying the existing subtype A002 with time constraint 2 ( for IT1001). Everything is fine in IMG and when trying to create the relationship via subtype in Easy access it is throwing error as Time constraint is missing but when i checked it is there in the table .
    can anyone suggest how to handle this issue.
    Regards
    Raji

    Hi Raji,
    As I have understood with you is that the Time Constraint is not changed properly. My client also had a requirement at that time i prepared a document.
    If you put a mail on my ID [email protected] I will forward that document to you
    reg
    Govind

  • Issue in PA - Header Modifications for IT0105

    Hi All,
    I have done header modifications for PA30 Screen, IT0000, IT0001 and IT 0105 (Communications) and for IT0021.
    I am able to get the details of PA, PSA, EG and ESG in the header details.
    But when an employee PA/PSA/EG/ESG has changed becoz of any action, the same information is not shown in IT0105 header details. System is picking up the old PA/PSA/EG/ESG details only.
    If i change the start date in IT0105 as per the last action run, then it is picking up the updated information. Where in the employee IT0105 (Mail ID/ Mobile Num) remains the same from his Date of joining.
    But as the action is been run and the PA/PSA/EG/ESG has already changed the same information should be updated automatically.
    Request you to guide me to get the updated PA/PSA/EG/ESG in  header details of IT0105.
    Kind Regards
    Nag
    09581555404

    Dear Nagesh,
    what our Team members suggested is correct.
    check the F1 help of Field CHOOSE DATA in Table V_582A_B.
    F1 help.
    Use
    If you set the Choose Data indicator, you will use data that is valid for the start date of the current processed, or displayed, infotype record to structure the infotype header.
    If you do not set the Choose Data indicator, the data that is valid for the system date will be used to structure the infotype header.
    so uncheck the CHOOSE DATA field
    regards,
    mohammed

  • Subtype for custom INFOTYPE

    Hi all,
    My requirement is to Create Custom Infotyp 9100 with two new subtypes(9001 & 9002).
    Subtype 9002 will pick up relationship data from the subtype of Infotype 0021
    IT9801 u2013 Subtype 9001
    PERNR     EmpNo     NUMC     8
    ZISNo     Serial No     NUMC     4
    VORNA     First Name In Passport     CHAR     25
    NACHN     Last Name In Passport     CHAR     25
    MIDNM     Middle Name In Passport     CHAR     40
    IT9801 u2013 Subtype 9002
    PERNR     EmpNo     NUMC     8
    ZISNo     Serial No     NUMC     4
    VORNA     First Name In Passport     CHAR     25
    NACHN     Last Name In Passport     CHAR     25
    MIDNM     Middle Name In Passport     CHAR     40
    SUBTY     Relationship Serial No     CHAR     4
    The field SUBTY should display as drop down by picking up the subtypes  related to Infotype 0021 from the table T591A
    Can you please provide ur inputs as this is very urjent requirement .Step by step procedure will be of great help.
    Thanks in advance.

    Transaction to create an infotype is PM01. See online help there.
    You have to create the PS structure first (SE11). This structure containms the fields, look at existing infotype for example.
    hope it helps.

Maybe you are looking for