Subversion checkout - no files show - 11.2 migration problem ?

We have an application in a subversion repository and have successfully checked things in/out using the versioning navigator.
In a new jdev 11.2 instance I checked out the application and saw files being extracted, etc.
jdev asked to migrate and I said yes. That went OK no issues.
Problem was that no projects or files show in the application navigator. Made sure no filters are on.
I can see the files and projects in the versioning navigator with their version next to them but I can't get the files to show.
So, closed the application, cleared it out of the folder I extracted to and used tortoise to extract the application. That went OK, too.
Went back to jdev, opened the application's .jws file , jdev asked to migrate, I said OK, no issues but also no files.
What am I missing ?

never mind - developer had much too aggressive filtering on initial check-in. Those .jpr files are important.

Similar Messages

Opening Adobe AI file shows fonts error "font problem....Gen.Arial and Gen.Arial.Bold".

Currently I have Adobe AI files that generate "Font Problem" message when they are opened.
The error specific as follow:
Gen.Arial: Font not found on the system: missing font has been substituted.
Gen.Arial.Bold: Font not found on the system: missing font has been substituted.
HelveticaNeue-Condensed: Font not found on the system: missing font has been substituted.
The document uses fonts or characters which are not available or are in a different format than originally specified.
I continue with opening the file and everything else looks ok. I have tried searching for the fonts but could not locate. I even performed Type>Find Font and replaced all missing fonts and still get the above error when re-opening the file.
Not sure how to resolve this issue.
Thanks for all the help.

Thanks for the help....if it is not too much to ask can you please give the step you applied to troubelshoot? I am on the IT side and helping the user who is working with the AI files.
If I am not mistaken the charts might have been copied from other programs and maybe led to this issue. Not sure about a redo since there many more files with same problem. Is it possible to apply fix to each file and then save?
Thanks.

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant. The files show up on the new MacBook but cannot be opened. Thanks!

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!

Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

How to recover my backups?? i used migration assistant but none of my old files showed up. I backed up daily and did a full disk back up twice.

how to recover my backups?? i used migration assistant but none of my old files showed up. I backed up daily and did a full disk back up twice

Open System Preferences and select Users & Groups. Assuming the migration was successful, you now have a new account - it was migrated. Migration Assistant doesn't copy files, it copies accounts. To see your documents you'll need to log into the account you migrated. (It has the same password it did on the other computer.)

Time Machine disk not showing up in Migration Assistant

I have backed up my Snow Leopard with Time Machine and I'm trying to import my stuff into Lion using Migration Assistant. However, my Time Machine disk is not showing up in Migration Assistant even though it's connected and shows in Finder. Any idea why?

I couldn't migrate from Snow Leopard drive either -- Snow Leopard used PGP encyption, migration copied the files, but they seem inaccessible to Lion with "permission denied" errors.
It sounds like you did migrate successfully. It's normal for the permissions to be wrong -- Migration Assistant creates a new account with the files from the old one.
What I would do in your place is start over. First, decrypt the SL volume and uninstall PGP. You should do that anyway, because PGP is a turkey and not needed in Lion. Erase the Lion volume (assuming you have no data on it that isn't already on your SL volume), reinstall Lion, and then use Setup Assistant, not Migration Assistant, to do the migration.

Workflow to color Subversion checkouts - encountering a few problems!

I've been trying to write a simple workflow that will find all my local Subversion checkout folders (easy - each one has the directory ".svn" in it) and "label" them with a particular color. However, I've encountered two problems:
1. The regular Finder workflow items can't find files or directories prefixed with a "." (i.e. hidden files).
2. If I use the Shell Script workflow, it outputs any results as text and therefore Finder doesn't recognise them as "Finder Items".
Is there another way I can achieve this?

That's because lists are suppose to be enclosed by { curly, braces } . That's also compatible with AppleScript's way of doing lists, but it's usually referred to as records, I think.
If you check the results of an action itself (button at bottom of action) that returns lists, e.g. *Get Specified Finder Items*, you'll see what a list looks like, as well as other outputs. There's also some buttons in the result part of the action itself that'll switch the view to icon, list, and text so you can see how the results are being interpreted (e.g. are files being found so an icon is shown?).

Cannot Checkout a file from sharepoint 2013

hi everybody,
i have been following this link
http://office.microsoft.com/en-in/sharepoint-server-help/check-out-check-in-or-discard-changes-to-files-in-a-library-HA102803583.aspx
and when i select a file and say checkout it shows below error.
and User have full rights on site as well on document library, i have double checked and damn sure about this and documents are not even checkout.
Wierd thing is when i checkout multiple file (even 2 files) that worked like a charm, what might be the problem.
Please help me...

Hi,
Is there anything useful in the ULS log about this issue?
You can check the ULS log by following these links:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
http://blogs.c5insight.com/Home/tabid/40/entryid/190/All-About-SharePoint-2010-ULS-Logging.aspx
Best regards,
Patrick
Patrick Liang
TechNet Community Support

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show up. How do I prevent this?

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show and open up. How do I prevent this?

Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
Make sure your kids' account(s) do not have admin privileges.

What is happening when recovered files show up in my trash everyday. These files are recovered from my Iweb.

What is heppening when folder entitled "Recovered Files" show up in my trash daily for the last 3 days?
They are apparently recovered art thumbnails from my I web.

Annoying, but nothing to worry about.
Sometimes the OS just tries to rescue files you've trashed.
It will happen almost every time if they were built-in templates (but the Application will replace them anyway)
Just empty the trash.

When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open. How can I change this?

When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open. How can I change this?

It should be an attachment. Your Mac just displays a preview of certain attachments (such as .pdfs) in the body of the message. A PC, for example, will see it as an attached file rather than a preview.
You can save the attachment on your Mac by Control-clicking on it and selecting Save Attachment.

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?
What do I need to do to bring the graphics and exhibits from the PDF file to the Word file?

Hi jackp52432917,
How was that PDF file created? Please see Will Adobe ExportPDF convert both text and form... | Adobe Community
It could be that the PDF file you're converting was created using a third-party application, and it doesn't contain all the information necessary to ensure a clean conversion. Have you had similar troubles converting other PDF files?
Best,
Sara

Files showing up on iTunes, but not in iPod

So a few days back, my iPod acted up and restored itself, sort of. Well, my iPod synced itself and added the music files from my library. So now when I look at my iPod files through my iTunes, the files show up grey and i can't play them yet they're still showing up. when i go into my ipod to find them, they aren't in there at all. anybody know what's going on?

Typo correction on my topic post: I realized the only music I could see in my library was what was updated off of my new laptop.

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

Photoshop Elements 5.0, 1 in 10 RAW files show broken

I have PS Elements 5.0 running on Vista Home Premium. I am shooting with a Sony Alpha 100 and the RAW files are .ARW. Approximately 1 in 10 of my RAW files show an end-of-file error. I've not yet update the firmware (should I need to?), but I have had a friend open up the same files in CS3 no problem. I have tried new memory sticks, used my laptop with the same Elements licence and I'm still having problems. It comes up with a greyed out box. If I delete the files from the HD and reinstall them, the same ones show up as broken, so it's something specific to these files. They open okay in the Sony RAW editor that came with the camera. What to do!?

Photoshop Elements Forum is Here
http://www.adobeforums.com/webx/.eeb4f8b/
First read the FAQ for your version, then go to the section
Technical Issues (All versions) to ask a question

.xmp files showing up in my SD card when accessing RAW files in Finder... Very weird!

Hi,
I'm having a very weird problem... I'm using a 4GB Scandisk SD card and am shooting my RAW photos on a Canon Rebel 2ti. I'm using a Macbook Pro, 2011 2.3Ghz i5, 4gb of Ram, with Lion v. 10.7.2 and am accessing the SD card RAW files through Finder. I'm secondary clicking on the image file or double clicking them as PS is my default opening program for RAW files. When I hit the "Done" key on any of the Photoshop files, a new .xmp file shows up in Finder. When I open it, it's a Microsoft Messenger for Mac 8 License Agreement...
I do have Microsoft Office 11 installed and have never used Messenger. It's not a huge deal, but it's driving me crazy and it's totally weird!
Thanks,
-Dave

It's a lot of separate, unrelated things happening to you in one long chain, but each step is normal and explainable.
You are opening raw files straight from a card into Photoshop. Photoshop will open them in Camera Raw. Camera Raw's preferences are set to save changes in XMP sidecar files. You are clicking Done, which applies the default Camera Raw processing, and that change generates an XMP file to store these new settings. That's why an XMP file is showing up in the same folder. On a computer, that's fine. But writing back out to a camera card with a device other than the camera is not recommended. What is recommended is to use another, faster way to preview raw files on a card without changing them (Adobe Bridge, Lightroom, Apple Aperture, Photo Mechanic, etc.), so that the card's left untouched as it should be.
If you don't want the XMP file to be generated, you have to do just one of the following:
In Camera Raw preferences, change the "Save image settings in" option to "Camera Raw database", not "Sidecar XMP files".
Instead of clicking Done every time, which applies any changes, click Cancel instead, if you were just looking and not editing.
Use something other than Photoshop to preview raw files. Most of the other ways are faster than opening them in Photoshop. The recommended workflow is to use a camera downloading utility to look through all the images on the card at once (instead of one by one as you are doing), and then select only the ones you want to bring into your computer. Bridge (via File > Get Photos from Camera, not by browsing), Lightroom, Aperture, and iPhoto all have that capability.
As to why double-clicking an XMP file opens a Messenger license agreement: As you probably know, the system has to figure out what program should open a file with a given filename extension. It sounds like maybe both Adobe and Microsoft have used the XMP extension, and the Office installer probably associated it with some type of MS Messenger file. So when you double-click an XMP file, Mac OS X opens Messenger. Since you have not used Messenger before, it's showing you the "first run" screen for Messenger, and Microsoft has set it up so that you have to click Agree on the license agreement before using it. If you never click Agree, it will still be the "first run" next time you open Messenger, whether you meant to or not. You can use Get Info in the Mac Finder to reassign XMP to open in another program.
You probably didn't expect so many things to happen from just opening a raw file off a card, but that's the way it worked out.

Subversion checkout - no files show - 11.2 migration problem ?

Similar Messages

Maybe you are looking for