SubVI: Access IOs and Frontpanel

I have a problem accessing the io-interface (Input and Output on the
Symbol) and the frontpanel. I have a main-vi which loads other sub-vi's
and displays there frontpanel in a tab-widget ("registerkarte" in
german)and i also have to connect there ios.
can anybody give me a help how to handle this.
Max

I'm not sure exactly what your problem is. Can you not wire front panel controls and indicators to subVIs or is it something else? Further explanation would be helpful and if you could attach the main VI and subVIs that would help too. To save everything to a single file, select Save With Options and choose Development Distribution.

Similar Messages

IOS 6, Netgear access point and Internet

Hi,
I’ve reached a point where I’m not entirely sure what to do next.
Here are some quick details (all are on most recent firmware unless stated):
Router: Draytek Vigor2830n
Access Point: Netgear WG102
Devices: iPhone 4, iPhone 5, iPad 2 and two iPad 2’s for comparison on iOS 5.
So, all devices running iOS 6.1.3/4 will connect to the Netgear access point just fine, can browse the LAN / stream media from network shares but internet access seems to be 'delayed' and can take anywhere between a minute to 20 minutes to connect (I give up after this). In comparison both the iPad 2’s running iOS 5 will gain internet access immediately after connecting to the access point.
On the other hand, when connecting to the routers wireless on all devices it works flawlessly and internet connection is 'instant'.
Given the problems that Netgear wifi has had with iOS 6, which were supposedly ‘fixed’ in iOS 6.1, I’m not sure what to do. It’s definitely a software problem, and could well be something to do with the router (along with connecting to the access point and iOS 6), but I’m not sure what to start changing first. iOS 5 works fine, so what has changed in iOS 6 to break it?
Its not a security issue like before 6.1 and not being able to connect to the access point at all.
Basically:
- I either need to figure what in iOS 6 is causing this ‘delay’ and how to fix it
-Give up on the access point and buy a new one (seems a bit extreme given that every other devices works fine – iOS 5, blackberry, laptops etc).
-Wait for iOS 7, hopefully in the next couple of weeks and see if it fixes it, though I can find little information on this issue as it is, and nothing to suggest iOS 7 might help. Though if iOS 5 is fine, iOS 6 broke it and 6.1 slightly fixed it, maybe iOS 7 will cure it? Doubt it…but worth waiting a few days.
Anyone got any suggestions? I have been through all the usual (HTTP proxy, forget this network, reset network settings), nothing makes it work flawlessly like iOS 5 and the issue is the same on a wide spread of devices running iOS 6.

Dont know my routerand access point works fine. Try http://support.apple.com/kb/HT4199 and make sure your setting are correct.

Since upgrade ios and iTunes can't access homeshare on ipad

Since upgrade ios and iTunes can't access homeshare on ipad. I see 'share', when using music app on iPad. I click on it and then select my MacBook Pro. Circle starts goes half way the stops. My Apple TV works great. So iTunes on MacBook must be set up right. Videos app is similar, the circle just spins and spins. My wifi is an apple airport. I beginning to think I have invested badly. I have signed out and in again of home share on iPad and MacBook as advised. I have read and re-read. Is there a solution?

Hello Gary,
Thank you for the details of the issue you are experiencing with Home Sharing. It sounds like you are not able to access iTunes from your iPad using Home Sharing. I found an article with steps that I think would help with this issue.
I recommend reviewing the full article below, but I think steps 4-7 are specifically useful for what you described:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Thank you for using Apple Support Communities.
Best,
Sheila M.

Switch between frontpanel of MainVI and frontpanel of SubVI

Everybody,
I want to Switch between frontpanel of MainVI and frontpanel of SubVI.Detailedly,when i call the subVI in the MainVI,hide frontpanel of the MainVI,And show the frontpanel of the MainVI when i close the subVI.Like LV.I have a unsuccessful example.
Using LabVIEW 8.0.0 on Windows XP
Attachments:
HidePanel.zip ‏19 KB
HidePanel_MainVI2.JPG ‏39 KB
HidePanel_SubVI1.JPG ‏21 KB

Hello Richar,
instead of 'FP.Open' you can use the property 'FP.State' to hide the main vi. You only have to set this property in the subvi. To show the subVi you have to set the properties in the vi properties dialog (right click on icon): window appearance-> show when called & close afterwards.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

After installing iOS 5, my ipad 2 will not accept my access code and has locked me out

after installing iOS 5, my ipad 2 will not accept my access code and has locked me out. Any ideas?

I don't know if your symptoms are the same as mine, but my problem is the same. Specifically:
My update seemed to go fine, but I noticed that items in Notification Center were not current or missing, as compared to the iPhone. Also, when iTunes saw the iPad without it being connected by cable, the portion of the iTunes screen that displayed the OS status was blank, and it told me that I had to connect physically to update. When I did, iTunes confirmed that iOS 5 was indeed installed and current.
With this, I decided to shut down the iPad completely, and restart it. When it came back up, the lock screen had changed. I now get a full keyboard (not just a number pad). When I attempt to enter my 4-digit passcode (and I know I'm entering the correctone), the iPad won't take it. Now it's completely locked and I can't access it.
The odd thing is the way the screen changed to display a full keyboard on the lock screen. This didn't happen to the iPhone.
All devices are running the current versions of everything.

Is it possible to synchronize mail between all iOS and OS devices?

I am running an iPhone 5 and iPads 3 & 4 with iOS 8.1 plus 2 MacBook Pros, and 3 (4th ordered) Mac minis with OS Yosemite 10.10. I also use an iPhone 4 and iPad 1 with older iOS software but mail is not important on them. I am the only user of these devices (reason = personal convenience).
I have mail accounts with Hotmail, Live, iCloud, Yahoo and Centurylink.
My problem is that because the mail is not synchronized (deleting an email on one device does not delete it from other devices or from the server) I now have up to and over 10,000 accumulated emails on various devices. I don't mind keeping all my old emails IF I could eliminate all the emails I choose to delete from any of the devices.
The result is that email has become unmanageable for me.
I had very high hopes that Apple would fix this with Yosemite and iOS 8.1 but that does not appear to be the case.
I suppose I could work around it by always going to Hotmail, Live, Yahoo, Centurylink etc. on the internet and not using iOS and OS mail but that seems a dumb way to have to do it.
Every time I buy a new iOS or OS device (like the new mini) it compounds the problem with yet another disorganized mail mess.
There is so much spam, phishing, data mining etc. going on that I use the multiple email accounts to pre-filter anticipated email responses. As an example I need a Yahoo account to use Yahoo but I know almost all Yahoo mail is spam so I can ignore it most of the time.
Any suggestions?
Thanks

Thank you for your reply.
I am somewhat new to iOS and OS having grown up with DOS and Windows. I am not familiar with IMAP and iCloud and I am not even sure which types of servers my various emails use.
The problem I would anticipate with iCloud is that (I assume) it would limit my access to data (including mail) on the iCloud to when I happen to be logged onto the internet. I also assume(?) that large files (photos etc.) would require some time to download whenever I wish to access them from whichever device I happen to be using (I hope I am wrong about this).
I have kept my devices to 500gb - 1TB for OS and 32gb - 128gb for iOS but since I have pretty slow WiFi (shared with DirecTV Whole Home and Netflix streaming) it is my impression that iCloud might be quite limited due to data transfer times.
Perhaps a factor would be that I have 2 DSL lines and my main DSL line is connected to two wireless routers (to also provide WiFi in a metal building that blocks WiFi and Cellular signals)
I may be totally wrong in my assumptions regarding iCloud. My mail is not so urgent that I need access to it instantly and I could wait until I had internet access or I can get it on my iPhone. My main concern with iCloud would be my data files (Word, Pages, Excel, Numbers etc.).
On the other hand, if I wanted to keep my 10,000 emails that would take up a lot of iCloud memory and I don't know how to measure how much storage it would take or how to move Hotmail or even iCloud mail to iCloud.
It may take me some time to figure this out.

Getting quite frustrated with my iPhone 4S. Can't access WIFI and/or Bluetooth nor will my computer allow it to be a "hotspot" unless physically tethered to computer. It started acting up after download....it also has messed up some app

I've only had this phone since Sept. and have already had to have the speaker replaced. NOW I can't access wifi and/or bluetooth (both are grey). I can't use the Personal Hotspot either (and the passcode no longer shows up). I can only access internet via the phone through the USB. This started over the past few days (and after I updated to IOS).
Some of my apps no longer work either...over 100+ hours of audiobooks on Audible can't be accessed as the Audible app just shuts off.
Any recommendations on how to recify? I'm pretty rural so downloaded anything takes going to the next town over to get a signal from the library... and all of my searching is eating into my 5gb limit through ATT....so it is a bit irritating

called Apple Care this a.m....new upgrade on 12/31/12 is supposed to fix the "bug"

Memory Leak Issue for Adobe Access iOS API

Hi,
We are trying to develop an iOS app (with ARC enabled) using Adobe Acces API 4.0 and we have identified that the function [drmManager createDRMSession] has memory leak.
DRMSESSION = [drmManager createDRMSession:METADATA playlist:PLAYLIST error:nil complete:^() {}];
We are using:
DRMSESSION -> weak
METADATA ->strong (as need to share within object)
PLAYLIST ->strong (as need to share within object)
After calling this function, the object is unable to dealloc and most of the leaking object related to networking (such as CFNetwork...)
Is this a known issue for the Adobe Access iOS API or we are missing some key steps.
Any suggestions is appreciated. Thanks in advance.

ans0600, sorry about that, I read Hiroshi's forward too quickly. I've done a little digging and have come up with two work-arounds:
Create a file with ARC disabled to translate the returned object to be an autorelease
declare the returned DRMSession as __unsafe_unretained and use CFRelease, as noted on stackexchange
In the future we may change this method to return an autoreleased object to avoid this issue. Let us know if you have any further questions!

TS2446 I just got my Ipad and I can not download apps. I get a message saying my Apple ID has been disabled. I have reset my password, I can access itunes and icloud but still can not download apps. Can someone please tell me how to get my ID activated

I just got my Ipad and I can not download apps. I get a message saying my Apple ID has been disabled. I have reset my password, I can access itunes and icloud but still can not download apps. Can someone please tell me how to get my ID activated? TY

Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

How can I access copy and paste history in iphone 4, absent some app, if I have copied another block of text before pasting the first?

Is there ANY way to access the copy/paste history in iphone4 without an app? I have the latest verdsion of ios, and I'm using an iPhone 4... The issue arose when I copied a large, VERY large block of text, and then another before I pasted the huge one that took forever to hammer out and was unsaved by any other method, and now I really need it all back!!! Please help! Is there no "clipboard" or similar tool that remembers copied text history for a while, or am I SOL on this one? I can tell you this, as important as the lost words are to me, I don't think I could summon the energy or creativity to repeat it, so any suggestions would be greatly appreciated, and possibly rewarded with cupcakes and affectionate (albeit digital) hugs. Thanks in advance!

I'm currently using Linux Fedora system.
Doesn't matter. There's no standard way for D&D on Linux, no single API.
Every application has its own mechanism which may or may not be compatible with any other.
Gnome and KDE groups are doing some work to provide a common standard but as you know the Linux zealots are completely opposed to anyone telling them what to do (such as creating standards) and won't in general follow them.

Adobe Reader for iOS and Android & Rights Management

This week's release of Reader for iOS and Android devices incorporates support for accessing files secured by Adobe LiveCycle Rights Management.
As you are probably familiar, LiveCycle Rights Management protects sensitive documents by encrypting them with industry-standard AES encryption and enabling central management of their access permissions. Protections persist even when documents are accidentally distributed via email, the cloud, or saved on a lost mobile device.
Many of the core capabilities that you are used to on the desktop versions of Acrobat and Reader are now supported when you are on the go on your tablet or mobile phone. We intend to incorporate additional functionality in future releases of these mobile devices and look forward to your feedback.
We've had several questions thus far about how this works. More information about the product, as well as a link to an FAQ can be found at:http://blogs.adobe.com/security/2011/10/just-released-adobe-reader-10- 1-for-ios-and-android.html
Jonathan

Hello Jonathan,
is there an way to trigger iOS download to immediately open using "Adobe Reader"
instead of using the default Previewer (showing an plain empty white window) and then re-open it using "Open with" ?
Is there an MIME-Type to indicate IRM-protected PDF-files?
Thanks,

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
signal=0x17, code=0x5, context=0x0
When I run the command:
rommom1> boot bootflash:
boot: cannot determine first file name on deice "bootflash:"
rommon2> boot slot0:
boot: cannot open "slot0:"
boot: cannot dtermine first file name on device "slot0:"
BTW System Bootstrap, version 7.1
I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
Any one have another new idea I can use, thanks in advance

This is a potentially complex issue.
Is this SUP configured to run as IOS native or CatOS Hybrid?
While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
Can you provide the screen captures as it boots?
You would be bette served by hacing a TAC case.

IOS and Android Native Scroll in Adobe AIR

I think it would be a great idea to implement the smooth scroll present in native iOS and Android applications for use in Adobe AIR projects.
Currently, the only way to obtain smooth scrolling lists with images is using StageWebView to show the image list in HTML format, and then awkwardly implement some JavaScript / AS3 communication functionality so the list in the StageWebView is interactive and can communicate with the main program. This is excessively complicated and very error prone (I've found some inexplicable JavaScript errors that only happen in the iPad, not in Android, and not in the PC!).
It would be way better to be able to skip all the StageWebView process altogether and being able to use a simple AS3 API to put any sprite/movieclip into a scrollable canvas which can be moved using the iOS native scroll.
Using Flash animation to simulate the scroll in a list with images is too slow in the iPad and gives a bad user experience. iPad users expect the native iPad scroll, not some poor jerky simulation. A native scroll is the only way to go.
And even though I talk about the iPad, this should be applicable to the native Android scroll, too.
Scrolling is a VERY BASIC action in a tablet, so this should be implemented as soon as possible.
Actually, I'm amazed we're already at AIR 3.0 beta, and still after all this time nobody thought of this. All sorts of fancy stuff is being added to AIR (hardware accelerated video, webcam and microphone access, etc...) but still something as basic and important as a smooth scroll, which every tablet user expects, is still not possible in Adobe AIR. We either have to implement some slow Flash animated scroll, or use the extremely complicated StageWebView with JavaScript/AS3 communication approach (I'm using a third party library called StageWebViewBridge for the JS/AS3 interoperations, which is great, but still, it's a far from ideal solution, since it's pretty fiddly and the JavaScript code doesn't always work properly in iOS).

Hi again jackson@mja.
I've given your scroll component a try just for some static texts, and I've found quite a few important bugs:
1. If the referenced sprite/movieclip is shorter than the scrolling area, it starts bouncing infinitely in a quite funny way,
    which renders the component unusable. Sometimes it even happens when the content is not shorter.
2. If your component is used inside another sprite/movieclip which is added dynamically from code ("addChild(mySprite);"),
    it doesn't work and stops with an error, because the EventListener for mouseDownHandler is being added to this.stage
    in the constructor, but a dynamic movieclip doesn't have access to the stage while in the constructor step (unless it is
    already in the stage added in the Flash IDE, such as in your FLA example). To fix this, I've added the following code
    to the ScrollArea() constructor:
this.addEventListener(Event.ADDED_TO_STAGE, init);
this.addEventListener(Event.REMOVED_FROM_STAGE, close);
    And then I've added the following listener functions:
private function init(event:Event):void {
this.removeEventListener(Event.ADDED_TO_STAGE, init);
this.stage.addEventListener(MouseEvent.MOUSE_DOWN, this.mouseDownHandler);
private function close(event:Event):void {
this.stage.removeEventListener(MouseEvent.MOUSE_DOWN, this.mouseDownHandler);
3. Also, the scrollbar is only correctly rendered if the scroll area is located at the up and left corner of the stage. To put text somewhere else, the component must be put inside a movieclip.
4. This is not really important, but I've found the following variables are never user and so I've removed these lines:
var xy:Point = this.localToGlobal(new Point(this.x, this.y));
var wh:Point = this.localToGlobal(new Point(this.width, this.height));
var sign:int = sign(obj[i]);
I hope this can help you improve your classes.
Best regards,
OMA2k

Native Mobclix Extension for iOS and Android

I'd like to announce to everyone that my Mobclix ANE for both iOS and Android is now available.
You can view the API, supported events, and download a full functioning demo from http://www.airextensions.com or directly by clicking http://bit.ly/mobclixANE
Support iOS 4.3 and greater, support for iPad ad sizes, receive event callback on all Mobclix events in actionscript, AdMob and iAd support for iOS, same API for both iOS and Android, support device rotation and more.
Hope you like it.
Mark Andrade
Sputnik Games

Well nothing prevent you from mixing flascc with native extension.
Also, I think that you can also use domain memory in AS3 with the Bytearray class (not sure about that).
Flascc vs normal as3 is mostly a question of language (portability) Do you want to write as3 or c++?
Native extension give you speed and native platform access(platform specific feature).
So, you should think about it this way:
AS3, run in flash and air. Is sandboxed. Can use domain memory, but it's a bit harder to leverage than flascc.
Flascc, run in flash and air. Is sandboxed, Can use domain memory. Give you the potential of leveraging the hundreds of opensources lib already out there.
Native extension, run ONLY in air. Is not sandboxed. Native memory management. Also let you leverage the c++ lib.
The best (in my opinion) is to write native code for mobile and desktop (no air or flascc involve) and use flascc for the flash/web platform. It's harder, because you have write portable native code (lots of abstraction), but you mostly have the same problem with native extension.

SubVI: Access IOs and Frontpanel

Similar Messages

Maybe you are looking for