SubVI - Main VI: Intensity graph update too slow ??

I have an intensity graph in my subvi that I call onto my front panel
using control references. It works nice but it is a lot slower than if
I just call it as a subVI which loads upon call. Has anyone faced this
problem before ?
Thanks
Kudos always welcome for helpful posts

I agree with tst, your PP VI runs at unlimited speed for no good reason. You should pace it with a small delay so it will release the control to other processes after each iteration.
Also your DAQ part seems inefficient. Why do you configure the DAQ task from scratch, acquire, and close at every iteration? This is way too much work. You should flatten this out to the PP vi. Configure outside the loop on the left and close outside the loop on the right. Place only the ACQ part inside the loop.
Also, place the real terminal of the graph inside the loop and clear it once at the beginning using a local variable. A local variable is always more expensive and less efficient.
I don't understand why you need a timeout event in the main VI, it does not do anything except spin the loop, right? Just delete the timeout event.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Advanced ?? Control Reference Update - Too slow.

    I have a main VI which controls a bunch of SubVIs. Each of these subVIs
    get data from the DAq and generate the plots and intensity graphs. I
    use a control reference to display these plots and graphs on my main
    VI. This is really slow. When I compare the speed at which the main VI
    is updated and the subVI is updated, there is a significant difference.
    Is this usually the case or am i missing something ?
    Thx
    Kudos always welcome for helpful posts

    I agree with tst, your PP VI runs at unlimited speed for no good reason. You should pace it with a small delay so it will release the control to other processes after each iteration.
    Also your DAQ part seems inefficient. Why do you configure the DAQ task from scratch, acquire, and close at every iteration? This is way too much work. You should flatten this out to the PP vi. Configure outside the loop on the left and close outside the loop on the right. Place only the ACQ part inside the loop.
    Also, place the real terminal of the graph inside the loop and clear it once at the beginning using a local variable. A local variable is always more expensive and less efficient.
    I don't understand why you need a timeout event in the main VI, it does not do anything except spin the loop, right? Just delete the timeout event.
    LabVIEW Champion . Do more with less code and in less time .

  • Update too slow of a user field..

    Hello everyone,
    I have a problem with the update of a massive field in user stores.
    The update works but it takes too much time, about 1.5 seconds to Article!
    This is my code sample:
                Dim sql As String = ""
                sql = "SELECT T0.ItemCode,T1.OnHand FROM OITM T0,OITW T1" & ControlChars.CrLf
                sql = sql & " WHERE T0.ItemCode=T1.ItemCode  " & ControlChars.CrLf
                sql = sql & "  AND T1.WhsCode='{0}' " & ControlChars.CrLf
                sql = sql & "  AND T0.FrozenFor='N' AND T1.OnHand>0"
                sql = String.Format(sql, WhsCode)
                Dim line As Integer = -99
                Dim ret As Boolean = False
                Dim itm As SAPbobsCOM.Items
                itm = CType(_SboCy.GetBusinessObject(BoObjectTypes.oItems), Items)
                Dim rows As DataRowCollection = GetRows(sql)
                For Each R As DataRow In rows
                    If itm.GetByKey(R("ItemCode").ToString) Then
                        If line = -99 Then
                            For i As Integer = 0 To itm.WhsInfo.Count - 1
                                itm.WhsInfo.SetCurrentLine(i)
                                If itm.WhsInfo.WarehouseCode = WhsCode Then
                                    line = i
                                    Exit For
                                End If
                            Next
                        End If
                        itm.WhsInfo.SetCurrentLine(line)
                        itm.WhsInfo.UserFields.Fields.Item("U_MyQty").Value = CDbl(R("OnHand"))
                        ret = (itm.Update = 0)
                    End If
                Next
                NothingObj(CType(itm, Object))
    Please know me suggest another solution?
    Thanks

    Hi Enrico,
    If you perform the same update using the SBO client (ie go to the Stock tab in Item Master Data and set a value in your UDF field) is the speed faster than the DI API? Do you have any customisations in the SP_SBO_TransactionNotification proc in the database? If you update a standard system field rather than your UDF field is the speed in the DI API the same?
    Kind Regards,
    Owen

  • Update too slow

    Started Apple TV update an hour ago. Not even half way on step 1. Help?

    Had to restore. But same slow update problem after. Thanks for responding...at least I knew to let it be! All better now!

  • SubVI - VI Update ? Graph, Intensity graph.

    I have a subVI which calculates data that is to be displayed in an
    intensity graph as it gets updated. I want to display the same
    intensity graph on my main VI to show the progress and update. I've
    tried using global variables, but it doesn't work well. Any suggestions
    Thanks
    Kudos always welcome for helpful posts

    I tried that before. doesnt seem to work. Please see attachment...
    Kudos always welcome for helpful posts
    Attachments:
    main.llb ‏36 KB

  • "LOGIC PRO X: Disk is too slow or System Overload.  (-10010)"  This is the message that I was having since two weeks ago with my Logic 9.  I updated two days ago to Logic X and I am still having the same problem.

    "LOGIC PRO X: Disk is too slow or System Overload.  (-10010)"  This is the message that I was having since two weeks ago with my Logic 9.  I updated two days ago to Logic X and I am still having the same problem.
    I recently formatted my computer.  In other words, I'm not using too much memory of my HD.  My Memory Ram is 8GB.

    dandotcraig wrote:
    A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
    Umm,, no offence... but what is ridiculous...  is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
    So.. Here's the thing.... 
    LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
    Here are just a few ideas to think about.. for around the time this started..
    Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
    If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
    Did you install any new Apps on your Mac?
    Did you add a new Hard Drive? How is it formatted?
    Did you start recording or creating music in a different way to how you used to before the problem started?
    Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
    Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
    Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
    Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
    Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
    ....and maybe a few of the others here will come up with other ideas and suggestions to help you...
    Good luck and let us know how you got on...

  • Insert or Update Item Master is too slow

    Dear Expert,
    I have a problem in add or update Item Master Data. When I click Add/Update, the process saving is too slow (need more than 5 minutes). This condition appear yesterday. In 2 days ago process add/update item master data normal.
    But the others transaction like business process, transaction is normal.
    I have did shrink database in SQL, but not help.
    Does anybody help my problem? how should I do?
    Thank you before help me

    Hi pak Hendra,
    May I know how much is your livedb size now ? If it is still slow after reindexing, you may consider to do these followings suggestions:
    1. Increase your server hdd size
    2. Increase your server's processor
    3. cut off and do new opening balance
    Is the problem happened in branch/outlet ? do you use citrix to access the server from branch ? Of course you can reindex the db to solve this issue but it is not the only one solution. You must also concern about the connection.
    Rgds,
    JimM@sbo_knowledge_village

  • HT1338 I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

    I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

    Thanks for your response. I was told, obviously misinformed, that you needed to dl Lion prior to Mountain Lion, so thanks for clarifying that. I cannot dl from the internet as it is too slow and I have limited GB per month. I know, at one point, you could purchase a jumpdrive with Lion for those of us who have this problem or no internet access. I will check into that via Apple or try to borrow internet service from a friend and move my computer there.
    Thanks again.

  • Help! macBook is too slow, haven't updated in months, rehilete always appears? What should I do?

    HELP! My MacBookPro is too slow, rehilete always appears, haven't Updated in months, is that the problem? What should I do?

    MaryKarmen wrote:
    HELP! My MacBookPro is too slow, rehilete always appears, haven't Updated in months, is that the problem? What should I do?
    Can you explain what  "rehilete always appears" means?

  • New iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server

    new iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server. by the way i try to dowload from turkey.

    anyone help me there? )=

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • 10.9.4 update- MacBook Pro now too slow to use

    I installed the 10.9.4 update on July 17. Early 2011 13" MacBook Pro. It has since become too slow to be functional. 'Spinning wheel' constantly, and delays after keystrokes. I had no problems at all before this update. I have read that repairing disk permissions sometimes helps and have tried that. I sometimes have brief periods of normal performance, then it slows down again.
    The problem is not specific to an application. It is slow regardless of what I am doing, even when first staring up and logging in.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I have iphone4 16gb i am update my phone to ios7.0.6 now my phone is too slow pleas help me....

    hello ...
    i have iphone4 16 gb i am update my phone ios7.0.6 now my phone was too slow and some calling probleams pleas help me....

    No, quite a few people have been having Facetime problems this week.
    See here for System Status and how to report a problem.
    http://www.apple.com/support/systemstatus/

  • After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?

    After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?

    I called tech support and I got the same **** canned response, backup and reset to factory settings.  Yeah right!  Everything was fine until Verizon shoved the software update down my throat.  I finally unchecked the box in Wi-Fi settings for auto network switch.  However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
    In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues.  I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me.  Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything.  Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away.  What a colossal waste of my time!

  • Eclipse/netbeans IDE way too slow after 10.9 OS update

    After updating to 10.9 eclipse and netbeans have become too slow. Netbeans takes around 10-15 mins to start, eclipse is better than that but is again too slow compared to what it was before upgrading to 10.9. Slowness is not only in startup but also in all of its operations.
    I updated to 10.9.1 too, but I dont see any changes in the loading time for these IDEs, they are still too slow.
    Have anyone faced this issue ? Any possible solutions ?
    Thanks

    No one else facing this issue ?

Maybe you are looking for