SubVI missing, but visible in windows

It looks like one of my sub-VIs has gotten corrupted (for a 2nd time).  The main VI will load, but it pops a dialog box asking for the location of the one, sub-VI.  The sub-VI is there, and clicking on it gets the same dialog box back.  Even if I just try to open the sub-VI, I get a dialog asking to locate that same sib-VI.  I'm using Labview 7.1 running on XP, and the last time the sub-VI was not corrupt is was programatically closed using VI server.
I'm not sure how the routine got corrupted, and I have no idea how to bring it back.  The last time I reverted back to an old saved copy (lost several hours of work) and made my changes again.  Any advice, aside from save more often?
Thanks,
Casey

Thanks guys-
For Network permissions:  the file is on the local machine, I have
administrator rights, and I created the file, so I don't think it's a
permissions issue.
For Virus scanner:  That's an interesting idea.  A virus
scanner is running, and I don't have full control to disable it, but
that's definitely a possibility.  Seeing how this has happened
twice, and both times to the same file, it seems that there is
something to do with the file itself that lends it to getting corrupted.
For the corrupt link:  It definitely does seem that the link is
corrupt, but the files link with itself is corrupt.  If I just
click on the file then I get a dialog asking where it is. 
Clicking on it again, this time from inside the "please find the file
named..." dialog, now opens the file.  So, it seems that it's link
with itself is corrupted.  Weird.  I can relink it to other
VIs that would call it by deleting the subvi and reinserting it. 
How would I relink it with itself?  I guess pasting the entire
block diagram into a new VI would be one thing to try.  I'll give
it a shot and let you know.
Thanks for the thoughts.  Any more ideas?

Similar Messages

  • IPod nano: Connected to the iTunes on Mac OK but not visible in iTunes on Windows. But is visible in Windows explorer as a disc.

    Hi,
    I have an issue with my iPod nano. I first connected it to the iTunes on Mac and synced perfectly, but now I am trying to connect it to the iTunes in Windows but iTunes can't see it. Even althought the iPod is visible in Windows explorer so it is connected to the PC. Don't know what to do next.

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Cheers,
    Patrick

  • New folder is not visible inside my project but shows in Windows Explorer.

    I created a new folder under another folder.  The new folder is not visible inside my project but shows in Windows Explorer.  Also, if I try to add another folder of that same name, it denies the action since the folder (although invisible) already exists.  My co-worker can access the same file (on a share drive) and see the new folder just fine.  This error occurs whether I was the one creating the new folder or she is the one creating the new folder.  I am new to RoboHelp and she has used it for years.  I suspect something is not yet set up right on my side.  Ideas? (I thought I posted this yesterday but I can't find it anywhere)

    Hi there
    What version of RoboHelp are you using?
    Did you create the folder from inside RoboHelp or did you create it using Windows Explorer?
    Cheers... Rick

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • Trying to install itunes but keep getting windows error126 message and libicuin.dll missing

    trying to install itunes but keep getting windows error 126 message and libicuin.dll missing have reinstalled numerous times and keep getting same messages.

    Are you saving the installer first and then installing, or are you running the installer directly from Apple's website? Also save first.
    If you're saving first and still having issues, try and use Microsoft's Cleanup Utility and then reinstall Quicktime/iTunes:
    http://support.microsoft.com/kb/290301
    Make sure it's a new and fresh download from:
    http://www.apple.com/itunes/download/
    If not mentioned in the articles, make a new user account in Windows and see if iTunes opens. That will tell you if there's something funky in your main account (if the new user works), or if you have a system-wide issue.

  • Missing buttons in CRM Portal but visible in PCUI

    In many portal iviews, buttons (New, Delete, Save...) are missing but I can see them in PCUI. Does anyone have any idea what I may be missing?
    For example: in Process Inventory List (Channel Inventory and Claims), all the buttons (New, Copy,Delete,Save,Validate,Release,Logs,  Cancel,Display ) are missing in Portal but are visible in PCUI.

    Hi Umesh,
    I guess this problem is coming because the page assigned to the EP role for the user id you are using is using different BL View than the one for which you have made the configurations in PCUI.
    Ex: The Opportunities page assigned to the EP Role might be using NAV_MAN BLView, where as all you configurations have been made for the Blank BLView.
    Hope this info helps
    Thanks and Regards

  • I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

    I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

    Welcome to Apple Support Communities
    You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
    You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible

  • I want to instal itunes 10.5.1 but it says that there is a missing thing in your windows package

    i

    Unless you give up the actual message (it did not say there is a missing thing in your windows package, did it)
    it will be hard to help.

  • Links in artwork missing in cs4 but visible in cs2.

    When opening in CS4 get a message links missing but not when opening with cs2. Anyone else ever encounter this?

    When i open artwork in cs4 i get warning links are missing and they are missing in links panel...when i open in cs2 it opens normally with links showing in links panel. Artwork was supplied to me and created in cs4.

  • Strange display problems: lines, missing icons, pieces of windows that stay on screen...

    My white 24" iMac has recently started having problems with the display. Because I'm able to capture it with Grab and due to the nature of the problem, it doens't appear to be hardware related. But, not sure. See the screen cap I took below as an example of one of the problems I'm seeing.
    I'll try to describe a few other display anomalies I'm having:
    Moving a window leaves the background that it was on intact all around the edge of the window, where the drop shadow would be.
    The Dock, which is set to be hidden until my cursor moves into that area, will appear sometimes with some of the icons missing, but, the shadows for those icons are visible on the Dock. Or, there are weird lines and patterns around each icon.
    While using Safari and a few other apps, I'll frequently get colored lines and patterns that suddenly appear across the screen, and then disappear when my cursor moves over that part of the screen.
    When I click on the minimize button, the window uses the Genie effect to move into the Dock, but, often leaves a bit of the window on the screen. It will sometimes clear when I drag another window over the area, or the window I'm dragging will start looking like it does in the screen cap below.
    My graphics card is a NVIDIA GeForce 7300 GT. I updated the firmware to ROM Revision 3467, but, it didn't seem to make any difference. The only think I can recall doing before this problem happened is I installed the iTunes 10.4.1 update. I'm running OS X 10.6.8 (Snow Leopard).
    This iMac is about 4.5 years old, so, it's not covered by warranty anymore which means I can't take it to an Apple Store for troubleshooting. I'm hoping someone knows how I can fix this. It just started doing this a week ago. Thanks!
    Tom

    Hi Michelefree,
    My iMac does not have a separate video card, so, I was not able to replace it as suggested above. Apparently with the Intel iMacs, or at least the one I have, the video "card" is actually a few chips on the logic board. I was told the only way to fix this is to replace the entire logic board, which is too costly (no longer within warranty).
    I did a bit of research and discovered that the problem seems to be related to how hot the computer gets. I noticed this, too. When I started using my iMac first thing in the day, no problems. As the day progressed and the computer heated up, I'd start having all these video problems.
    I found a utility called smcFanControl which allows you to speed up the mininim fan speeds inside the computer, which helps keep it cooler. Since I installed this, I've had very few video problems. So, it appears to have "solved" my problem for now.
    I wish there was a better solution than this band-aid fix, but, it's a lot cheaper than having the logic board replaced or buying a new iMac, the only choices I was given by Apple. Hope it works for you, too!
    Tom

  • HT1329 iPod classic disc use - only some music visible in Windows Explorer!?

    I followed above steps but then realized that it has only copied some of my music over. When I look at the music folder on the ipod in Windows Explorer, I only see some of the artists/albums/songs that actually on the iPod! I can see that a certain song is on my iPod and can play on my iPod without a problem, but it is not visible in Windows Explorer, hence it doesn't get copied over.
    I can find the songs in the hidden ipod_content file on my ipod, but if I copy a file over to iTunes it gets added as a new file (which works), but the 'old' non-functional file is still there. We are talking hundreds of songs so doing it this way would mean hours and hours of locating manually and adding to playlists plus deleting the 'old' file in iTunes.
    Is there a way to copy everything over from the ipod_content file and getting iTunes to match that with the missing songs like it did with the songs that were copied over the first time around?

    Hmm.
    Ideally you would have copied the entire iTunes folder from the old computer to the new one, having first consolidated your library to make sure that all the media content was inside the iTunes folder. If it isn't too late then go back and do it again.
    Otherwise see Recover your iTunes library from your iPod or iOS device. If you have your preserved library file what might work is to manually recover the media files into a new iTunes library with the iLounge article near the end, get iTunes to organize the media. Then cut and paste the new media folder onto the one you had previously so that no duplicate files are created. With luck your original library can then find the recovered files.
    tt2

  • I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

    I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • My iPod Touch 4g not visible in Windows or iTunes

    My iPod Touch 4th generation is not visible in Windows or iTunes. It also doesn't seem to want to charge. I've tried the Troubleshooting Assistant but nothing happened. Any ideas? It was working fine last night, and this morning started acting wonky.

    http://support.apple.com/kb/TS1538

  • Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

  • All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

    All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

    Hi
    I haven't even touched anything that I know of?
    And You've not moved or emptied any folder on Your Hard Disk named
    • iMovie Event's - or -
    • iMovie Project's
    Or - disconnected any external hard disk/s
    As one CAN NOT move the Event's or Project's on / via DeskTop/Finder - AS iMovie then loses the connection to them. Moving them - MUST BE DONE - within iMovie application - to work OK.
    So if You by meaning or accident moved it/them - Move them back - and iMovie might work again.
    ELSE - If You are 100% sure that You didn't move them then
    • Trash iMovie Pref and Cache files
    • Run Repair Permissions - Disk Util tool
    • Run Repair Hard Disk - Disk Util tool - BUT YOU MUST Start-Up Your Mac from DVD or External HD to do this
    and may be all will work OK again
    Yours Bengt W

Maybe you are looking for

  • Two separate enterprise WiFi networks in the same building

    I work in a building that currently has Cisco controller based access points. The access points aren't managed by us and are actually part of another campus. We are given access to them but they don't work quite like we want them to. So we are wantin

  • Red Media suddenly went offline - Please Help!

    Hello, I am aware that this is a reccurent problem. I remember seeing a similar post last week but for some reasons I can't find it anymore. Here is my situation. After months of endless editing of a feature film, I am about to export the final cut a

  • Upload image in executable program

    hi, upload a image into executable program, with out using  se78. thank you, dinesh.

  • Where is stocked the description of different object in ABAP Dictionary ?

    Hi, Please, Can any one tell me where is stocked the description of different object in ABAP Dictionary like: Domain (Description, value range u2026), View, Data Type...? Best regards Mustapha

  • Help with Skype Access Number for South Africa

    Hello Can someone point me in the right direction for the Skype access number for South Africa (where I am going on holiday later this week). I can see numbers for other places in my account but cannot figure out how to add one for a new country. Tha