Subwoofer/bass too loud

Hi!
When playing a videoclip or playing a game in flash the bass is way too loud. Anyone else with this problem? It only appears when I'm using Firefox, not Chrome.
I've tried re-installing Flash and Firefox.
Flash-version
11.8.800
Web browser
Firefox 23.0.1
Operating system
Windows 7 64bit

@Chris Campbell
Thanks for your reply! And apologies for my slow response.
I've followed the steps closely to uninstalling Flash Player and installed Flash Player 11.7 for both IE and other browsers. After uninstalling I checked the versions using this link:
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
and noted the following versions:
On my Google Chrome 30.0.1599.101 m:
Your Flash Player Version: 11.9.900.117
Your OS: Windows 7 (32-bit)
Your Browser: Google Chrome
On my Maxthon 4.1.3.4000:
Your Flash Player Version: 11.5.502.149
Your OS: Windows 7 (64-bit)
Your Browser: Google Chrome
On my IE 10.0.9200.16721:
No Flash Player found
Seems like the uninstall process did not clean up Flash Player entirely. Nevertheless, I tried installing Flash Player 11.7 to see what we get. Post-installation, I checked the versions again and saw the same for Google Chrome and Maxthon but for my IE, I now see:
Your Flash Player Version: 11.7.700.242
Your OS: Windows 7 (64-bit)
Your Browser: Internet Explorer
I then went back to YouTube to check the bass levels and still heard a bass boost when using Maxthon and IE and not Chrome.
Hope this is useful! Let me know what you'd like me to try next

Similar Messages

Bass too loud in T6100 5.1 set

Hey, a few days ago i got a t6100 and im really impressed by it.. Maybe a little too much, because even on the lowest level of the subwoofer it makes the house+neighbourhood shake.. So i had to put a piece of cardboard under the subwoofer, put the lower tones in the equalizer very low.. but there is no difference between alot of bass, and no bass when i do this, where the tracks lose their vibe.. on my old t200 when i turned the knob of the subwoofer down all the way, it would give very little to none bass. I wonder if i can make this possible in the 600 without these measurements?
I will get an x-fi sound card in a few days, are there any options in there to temper the bass?

hey aki i got the same set as yours but wheni turn the bass button on it lowest i dont hear anything (must be equalized i suggest u have onboard sound as i have X-Fi Xtreme Gamer i think maybe that will be the difference)
Greetzz

I have a MEX-BT4000P Bluetooth Audio System. The subwoofer is always way too loud.

I have a MEX-BT4000P Bluetooth Audio System. The subwoofer is always way too loud, even when the volume is turned way down. I need to know how I can reduce the bass for the subwoofer.
Thx, Scott

Hi Scott! Are you using the rear speakers as subwoofer? If yes, you can adjust the Rear Bass Enhancer (page 34 of the manual).
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Ipod playing too loud?

Hi there, JOSH!!! Oooooooohhhhhhhhh! Anyway, I've been having some problems with my ipod nano (4th gen) recently and I'm wondering if ya'll could help me out, if you'd kindly :3
Firstly the ipod is playing too loud, way too loud. Now this is not just your typical loudness, this is.... Advananced loudness.... To the point that the song becomes barely listenable.. Ok, to give you an example, let's say I'm listening to "POWER" by Kanye West. When the drums and the 'beat' come in at about 0:25 it just sounds like grabbled static, really loud, grabbled static. :/
And I've no idea what's going on.. At first I thought that the bass and treble in the equalizer was too high, but it turned out the equalizer wasn't even on :S Then I tried restoring it to factory settings (Several times), but that didn't work either. And 'then' I thought it might just be the headphones, but that was a dead end too! :O Now I'm left wondering, just what the **** is going on :/ Anyone have any ideas on this? (P.S Volume limit was never used)
Secondly it runs out of battery, like that *Clicks fingers* I think after 45 minutes it's already out of juice. :/ Though I believe that this might be due to the 'loud' problem, it could be something else ...
Thirdly it keeps 'crashing' and it's not just a 'hold down ya menu and play button and it'sa better' crash. It's a 'Restore to factory and resync your whole ****ing libeary everytime' crash :/
It's only recently started doing this. About the time itunes was last updated.. I synced up and poof ipod starts acting funny :S
So can anybody find me!!! Somebody tohelpmefixmyipod?
As a note my Nano magically recovered from being dropped in water about a year. However it's been working just fine and dandy for about 5-6 months now.

Try verifying that you do not have optional volume adjustment cranked up.
While in iTunes, get info on a track that is having this issue. Go to the options tab and at the top there is a "Volume Adjustment" setting. It should be set to "None". If it is set to +100%, that is your problem.
To fix, all of them at once, you can select all in your music library, then right click and select "Get Info" it will ask if you want to change multiple files at once, say yes. Then go to the options tab and set it to None and it will put that on all your tracks.
click ok, resync your music and see if that does it.
i

Need Headset recommendation... my Motorola Headset is too LOUD at min vol.

Help Please! I just purchased a new iPhone (am loving it!).
Only problem is my current Motorola 500 Headset when paired with my iPhone is way too loud for my hearing even at the lowest volume settings. Have both iPhone and wireless headset volumes set to minimum.
I want to buy a new headset, but both AT&T and Apple staff tell me I'll need to do a trial and error of headsets to find a "quiet" one. '*Am hoping someone here, 'in discussions', might have a suggestion for a suitable bluetooth wireless headset.*
Many Thanks and appreciation...
Geoff

Absolutely positively the BEST headset Ive ever found so far is the one in the Apple Store:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=MTU 4MTc&fnode=home/shopipod/ipodaccessories/headphones&nplm=TP637LL/A
The V-MODA VIBE Duo Earphones/Headset for iPhone
The bass on these things is incredible. Never heard such good bass in a headset.

ITunes 10 upgrade makes airtunes volume too loud even at minimum setting

I just updated to iTunes 10 this morning and love the interface and most of what is has to offer. I have, however, encountered an issue with the volume when streaming my music through Airtunes (or Airplay now) and my Airport Express to external speakers. I have an Express set up in my son's room and hooked up to a pair of computer speakers via a stero-mini to stereo-mini. Before the update the volume adjustment worked fine but after updating to iTunes 10 even the minimum volume is too loud for the white noise we put on to help him sleep. If you have ever had a fussy infant you understand that this is a HUGE problem. I've read the forums and come up with nothing. I know that I can manually change the master volume of the sleep sounds (get info on specific track and change master volume) but that's a ridiculous work-around. I've resorted to using Airfoil (an excellent program by the way) because I can't get Airplay to work right. All of the setting are there for it to be a real hit (individual volume settings for each set of external speakers - I have 2 airport express units) but they just DON'T WORK. What a shame that after an update I have to resort to a 3rd party program. I hope Apple hears this and updates very soon or the folks at Airfoil are going to be getting a lot of business very soon. Next post is at Engadget and Mashable
cool. please let me know if you've found a setting that I don't know about.
thx.

iTunes 10 allows each AirTunes (AirPlay) zone to have a separate volume. Try selecting "Multiple Speakers" in the "AirPlay" tab and adjust the volume from there. Also make sure the "Preferences" settings are set to allow for remote volume to be set.

Nokia 2700 handsfree kit volume too loud

my car (2007 bmw with fitted in bluetooth handsfree kit) connects fine with the new 2700 nokia i bought, however people keep telling me that they can hear me too loud over the phone, while in the car the volume is ok. I didn't have this problem with my previous nokia model, or with the one my son has, 5310 Xpress Music. The problem is that i can change the volume settings in the car, only the speaker volume that is,and the phone, once connected, doesnt allow any change of volume settings.
it is just the microphone volume, so not the speaker volume, and that i don't have this problem with other nokia models...
Yours sincerely,
Nicolas

As always, as this is a place where people will often/likely come when they have an issue of some sort you can't really measure whether or not something is structural or 'general occuring' by posts here. No one would deny that you may have an issue, but if it were as widespread as you seem to think it would be all over the media which is isn't.
I'd have the phone checked at the retailer or a Nokia Care Point.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

HT1577 The movie I rented from ITunes was so quiet I couldn't hear all the words despite my Tv being on top volume which is way too loud for TV programs.

Rented movie was so quiet despite TV being too loud when watching TV programs.
How can I solve this?
Captions were on the movie and I could get rid of them
how do I do it ?

Hi and welcome to the forums!
Sorry to inform you that there are no setting for the intensity of the vibration feature.
I have not seen 1 post that is similar to your post.
Please feel free to take advantage to the search box upper left corner, to see if you
can find another user with your concerns.
I wish there was an answer to address four concerns, but I'm afraid there isn't.
If you need more information, please ask!
If not, please resolve the post using the options by the kudos’ star.
Just check the post that had your answer!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

IMovie to iDVD--Video too dark, sound too loud--Help!

I created three iMovie projects for my son's swim team, then made a DVD using iDVD. It was fine when viewed in iDVD's preview, but when burned to the DVD-R the video was too dark and the sound was way too loud. This is footage taken on a Sony digital camcorder (DCR-TRV11).
I did the iDVD project by starting from scratch from within iDVD, then dragging the iMovie pieces and still images into the iDVD project. The iMovie pieces were prepared by using Share to make them into "full quality" .dv movies.
When I play the finished DVD on my iMac, there are no unusual problems with the video or audio. It looks and sounds like it did when played from the digital camcirder. But when played on both of my standalone DVD players + TVs, the video is too dark and the audio is much too loud.
Any idea why this is, and to fix it? I don't find a way to reduce the audio volume in iMovie. Maybe there is a workaround using the Relative Volume feature, but all my clips have a similar sound level. Any help will be appreciated.
--Eric
iMac G5 Mac OS X (10.4.3)

when burned to the DVD-R the video was too dark
They is a VERY slight darkening during the MPG-2 compression process (see my pages Digital Video Color Bars Test at http://homepage.mac.com/profpixel/color_bars/colorbars.htm and iMovie HD and iDVD 5 Gray Patch Test at http://homepage.mac.com/profpixel/gray_patches/graypatches.htm )
I suspect what you are seening is a major difference in brightness/contrast between your computer monitior and your TV set (and in fact you admit this: "When I play the finished DVD on my iMac, there are no unusual problems with the video or audio. It looks and sounds like it did when played from the digital camcirder. But when played on both of my standalone DVD players + TVs, the video is too dark and the audio is much too loud.") so you aren't seeing an iDVD problem.

Mac audio TOO LOUD after rebooting Mac

After rebooting a PowerMac G4/500 (AGP) with Mac OS X 10.4.6 sounds too loud (as if it was at top highest volume) when playing audio files, even though the audio setting (keyboard audio keys) is set to only one to three points. Just clicking such keyboard audio buttons (to lower or even increase it) fixes it and the audio returns to its correct volume. What is going on? This is driving me nuts!
Thanks.

Justin,
Thanks. I have done as indicated, shut down and booted, yet the issue persists. For instance, if I go to iTunes and play a song, it plays very loud, yet the audio is set at a single point. I can see it clicking the keyboard audio keys. As said, once I click any of such keys (increase or reduce volume any amount) the audio returns to its normal volume until the next time that I boot the Mac. This is a 100% consistent issue. Weird.

Distorted Audio-Captured too loud through mixer

I have a video that has a man speaking and most of it is distorted. It sounds like he is mumbling. The problem occured because the audio was captured too loudly through the mixer. I have tried different filters but none have seemed to work. I have also done the tutorial mentioned on a lot of these discussions. If you have any idea of what to do please help me out.
Thanks,
Micah Wooten

If the audio was recorded that way to begin with then your pretty much screwed. You said it was "captured" too loudly. If that's the case then you could recapture.

2nd time this has happened. Computer making noises too loud for computer.

Okay, seriously I have had enough. While using Garage Band editing music, my computer once again made a too-loud beep/honk noise. This has happened once before. Now my audio/built in speakers are F'ed! NOW ALL MY AUDIO SOUNDS LIKE THIS: http://www.youtube.com/watch?v=OcTHGDOLEoc (you gotta play the video. )
This has happened once before, but everything was okay except for a bit of distortion. WHY does this keep happening?! Heres a bit more information:
- Using Garage Band, didnt press ANY buttons to trigger sounds
- In using wireless internet, password protected
- I only had iMovie and iTunes opened (as well as GB)
- THIS IS THE SECOND TIME THIS ** HAS HAPPENED
- The sound was WAY too loud for the computer. It was like Max times 50
- I've only owned my Mac for about a year.
- I do not want to get a new bloody Mac, I just downgraded from SL.
I'm not really happy atm, so dont give me stupid answers.
(Wow, it sounds like im listening to AM radio! WOW! ... -.- )

I don't think you got a KP when the machine was off, but rather you may have closed the lid before the MB was fully powered down and it went into a sleep state.
Did you try running the Apple Hardware Test to see if the ram is bad? Since yo never had a KP before adding new ram, and the only change was adding said ram. My guess is that its the memory that is the cause.
I cannot vouch for patriot ram, but I suggest in the future you consider Crucial as its a higher quality ram.
Mike

Action is too loud and talk is too low! Any suggestions?

I have noticed when I rent movies from iTunes on my Apple TV I find myself constantly adjusting the volume. It doesn't matter if I am using my tv speakers or my surround sound speakers. The action scenes are way too loud and I have to strain to hear people talking. Any suggestions?

Or use Compressor if you have it.
Create a Custom job.
Al

G6-1D96NR Laptop. Windows 7 Volumn is too loud

G6-1D96NR Laptop. Windows 7 Volumn is too loud on USB external speakers, even with the volume set to "1", in the volume mixer, and all the way down on the speaker. If I put it to "0" then there is no sound. Only options I have are "no sound" or too loud. No in between.

I have the same problem. Did you ever find a solution? I'm still looking for an answer, which I'll share, once I find it.

Cannot adjust sound without it being too loud

Hello.
I've basically had this problem since I upgraded to Windows Vista, and now it's starting to frustrate me quite a bit since going down the 64x bit route...
I cannot figure out how to get my volumes back to a normal state. When I was on Windows XP, I could have my main volume at about 75, and it would not be too quiet or too loud, but since the ugprade, the speakers are set to 4, and everything has to be jacked down otherwise it is far too loud.
The sound card is an Audigy 2 ZS.
This is what my volume mixer panel looks like.

I have the same problem on my 2011 Macbook Pro.
I've been using my computer with my lid closed and on external speakers and monitor and bluetooth devices for days on end and I haven't found a solution.
Has anyone out there found a solution yet?
This was the only place I found so far with the same exact issue I have.
I've had some virus trauma in my life, so my mind naturally goes to "VIRUS!" after any little strange thing happens. I'm pretty much imploding at the moment, so, if you guys have anything, let me know.

Subwoofer/bass too loud

Similar Messages

Maybe you are looking for