Subworkflow instance cannot be created

Hi,
Iam calling a public subworkflow using Call Public Workflow.
Iam getting follwoing error.
It will eb great if someone help me to comeout from this problem
regards
Ananth
<Nov 15, 2002 7:24:42 PM IST> <Error> <B2B> <000000> <<B2B-BPM-Plugin> ERROR:
Ex
ception while creating subworkflow instance object
com.bea.b2b.wlpi.WLPIException: Cannot create process to handle workflow instanc
e conversation

Yeah that is a problem for some but not for others. Could be you have 4 primary partitions on the drive already and the Recovery HD partition needs to be primary and there can't be more then 4 of them on any drive.

Similar Messages

How to call a instance method without creating the instance of a class

class ...EXCH_PRD_VERT_NN_MODEL definition
public section.
methods CONSTRUCTOR
    importing
      value(I_ALV_RECORDS) type ..../EXCH_VBEL_TT_ALV
      value(I_HEADER) type EDIDC .
methods QUERY
    importing
      I_IDEX type FLAG
      i_..........
    returning
      value(R_RESULTS) type .../EXCH_VBEL_TT_ALV .
Both methods are instance methods.
But in my program i cannot created instance of the class unless i get the results from Query.
I proposed that Query must be static, and once we get results we can create object of the class by pasing the result table which we get from method query.
But i must not change the method Query to a static method.
Is there any way out other than making method Query as static ?
Regards.

You can't execute any instance method without creating instance of the class.
In your scenario, if you don't want to process your method of your class, you can check the instance has been created or not.
Like:
IF IT_QUERY IS NOT INITIAL.
CRATE OBJECT O_QUERY EXPORTING......
ENDIF.
IF O_QUERY IS NOT INITIAL.
CALL METHOD O_QUERY->QUERY EXPORTING....
ENDIF.
Regards,
Naimesh Patel

Webi Reports - Object with id ... cannot be created because it has no name

I'm trying to launch a Webi report from our application using openDocument method. When the report is launched it fails with following error -
30567: Unable to save the document to the repository due to the following error: The object with id number '27731' cannot be created because it has no name. (Error: WIS 30567)
Before scheduling the report I'm calling setName method to set the name of the report but still it does not work. Any help would be greatly appreciated.
Thanks
Manas

Hi John,
I will try to give you some more background about this problem.
From our application we are not directly launching the report. We schedule it to run immediately and then view the instance created (using the instance id returned by the schedule call).
For scheduling we use the web services API (BIPlatform) and before scheduling we fetch all the prompts (again using a webservice API). The call is something like this -
WebiProcessingInfo wProcessingInfo = boWebIReport_.getWebiProcessingInfo();
After that we populate all the prompts with their corresponding values in application and schedule it. However the scheduling fails with the error I mentioned in the start of this thread and when we try to view it we are presented with a screen to enter prompts again.
From the scheduling error it looks like its failing because the name could not be set but I really doubt if thats the case. We use same calls to schedule and view Crystal reports also and they work perfectly. Only Webi is giving this error.
Thanks for looking into this.
Manas
Edited by: Manas Mandlekar on Sep 10, 2008 7:14 AM

Workspace in use or Cannot be Created

Is it possible to setup CFBuilder so files opened in Windows explorer open in the currently open instance. The final release tries to spawn a new instance and displays "Workspace in use or Cannot be Created". I got around this in Beta's but i can't find a workaround in the final release.

I will also pipe in and state that this is something that I have seen a few times, more
so on Windows 7 than any other version of Windows.
The problem is that there are times when you think you have closed ColdFusion Builder / Eclipse down, that it in fact is still actually running.
So when you go and try to use the same workspace you are presented with the message that it is in use or cannot be created.
The solution is simple, if this is the case with people then it is just a matter of killing that instance of Eclipse that is still running.
Regards,
Andrew Scott
http://www.andyscott.id.au

The Server Instance cannot be started

I have Jdeveloper 11g and when i am running my .jsf page, it shows error that *"The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully."*
Kindly provide your help for the same

Not sure if you have reviewed the following thread:
Error Creating Integrated WebLogic domain for JDeveloper 11.1.1.1
Additionally, I generic search of this error led me to Support doc (which can be reviewed using My Oracle Support):
Rebuild the Integrated Weblogic Domain When It Was Not Built Successfully (Doc ID 1346199.1)

Relationship cannot be created between identical business partners

Hello,
I am implementing CRM 5.0 and trying to create business partner relationships to the identical business partner. For example, I am trying to makbe BP#1 have te relationship 'Has a Contact of' to BP#1. However, I am getting the error message:
'Relationship cannot be created between identical business partners'.
(Message no. R1776)
Has anyone ever encountered this error? Is there any way to create a relationship in SAP-CRM to the same business partner?
Thanks much for your help,
Dan

Hi Daniel
In short: No, it is not possible to have a relationship "between" a BP and itself.
In long: In R/3 there are partner roles like Sold to, ship to and others. When CRM was designed the people at SAP did want to simplify a bit and implemented the following logic for partner determination: If there is no relationship of a searched type, the BP itself is taken. As a result a relationship pointing to its source is not allowed as it would duplicate the information already existing.
Hope this helps,
Kai

G/L account 59500140 cannot be created as a cost element

Hi Viewers,
When I try to do the KO88 Process order settlement i am getting the below error:
G/L account 59500140 cannot be created as a cost element
Message no. KQ119
Diagnosis
When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
System Response
The entry invalid.
Procedure
You have the following options:
Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
I would like to know the GL Account 59500140 is a P&L Account. Is it correct?.
Please help me to overcome from this issue.
Thanks & Regards,
Aswin

Execute transaction code FSP0 and check whether the account is a P&L or a Balance Sheet. Nevertheless, you can only enter accounts that are not created as cost elements in customizing transaction OKG8. If you enter an account that is also a cost element, then you need to configure default CO account assignment using OKB9 or a substitution using OKC9. Please refer to the following SAP Notes.
https://service.sap.com/sap/support/notes/581296

Data source cannot be created : MAPVIEWER-00011: Error creating a map data

Hi everyone,
i am getting an error meaasge while creating datasource
" Data source cannot be created : MAPVIEWER-00011: Error creating a map data source."
pls help

You should assign only one value to jdbc_sid. Try with this
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="false"
/>
Make sure that oracle sid is 'ORCL'
Sujnan

Delivery cannot be created (only 0 qty of material available )

Hello All,
I have created a sales order for material A on plant B for one qty. The delivery date is 29.12.10 but the system has confirmed the schedule line with a delivery date of 3.1.11. The material availibilty date is 28.12.10.
But when I create the delivery, the system gives message, "Delivery cannot be created (only 0 qty of material available )".
I have checked MMBE and CO09 , there is a stock of qty 2 for material A for plant B. Also there is no other sales order consuming the stock in CO09 for material A in plant B.
The schedule line catergory is CN(not relevant for MRP) in sales order and that is why I cannot see sales order requirement in Md04/Co09. But in any case since the stock is available, the system confirmed the schedule line for 3.1.11 in sales order as said above.
While creating delivery, we are giving a delivery date of 28.12.10 (equal to material availibity date ). I have not checked the availibilty check group but even if checking group= no check, still I think ,the system will confirm schedule line since stock is available and it has confirmed stock in sales order as said above
But still we cannot create delivery and receives the error, "Delivery cannot be created (only 0 qty of material available )"
Pls help.
regds
Pamela

Hi Pamela,
It seems that material A is not available in plant B on 28.12.2010 even if the stock is shown as 2 qty in MMBE
Please go to MMBE place the cursor on storage location and the check the Warehouse stock for that material.
It may be that material qty 2 which is currently shown in stock overview is lying in interim storage type 916 against some goods movement (601) issued against some other sales order.
Also check whether negative stock are allowed in that storage type. In your case , I think they are not allowed.
I hope this helps
Br,
Tushar

When trying to restore an iCloud backup, I receive the error message "Appe-ID cannot be created. invalid device while updating mme delegate account".

After a complete crash of my iPad 3 (WIFI only) because of updating to iOS 7.03, I try to restore my config from iCloud.
I managed to get into the settings assistant and enter my Apple-ID (which is valid as checked via iTunes).
But then I see the error message "Apple ID cannot be created - invalid device while upgrading mme delegate account".
I have no clue what the mme delegate account is but need my data back.
Any suggestions?

All you need to do is restore the iphone in itunes as new
and then set up as new
after this is done
then you can restore from itunes back up with out any error!!
-Johnny

Error in file receiver adapter (Directory does not exist / cannot be create

I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??

Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK

PROBLEM IN SETTLEMENT CO88 - G/L 7000203 cannot be created as a co element

Dear friends,
I am facing with an error. Kindly suggest the way how to come up with the issue.
My Client due to some reason passed an JV in the month of december in PRD.
Now after this all the settlement for the next periods are in error. The following is the error while executing CO88.
G/L account 7000203 cannot be created as a cost element
Message no. KQ119
Diagnosis
When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
System Response
The entry invalid.
Procedure
You have the following options:
Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
I even tried to create make default the COST CENTER in OKB9 for that cost element as stated in the message itself but still the problem exist. I got another suggestion. Firstly i will transfer the values in new GL a/c, and make the necessary config changes in OKG8 with the new GL a/c.
can somebody guide me whether i am on the right way or is there any work around possible.
regards,
sandeep jain

Hi Sandeep,
In Transaction OKG8 the GL account for P&L(7000203) should not be a cost element. I dont know how it was allowing you all this while.
Try assigning another P&L account without a cost element.
Keep us posted on the progress please.
Thanks
Naveen

Error while displaying file " C:Temp Filename.Ext cannot be created"

Dear Friends
Some users face problem while display the file. They get message " C:\Temp\ Filename.Ext cannot be created ". I checked Details. I got explaination as follows.
Caution! You are not authorized to work with temporary storage
Message no. ED204
Diagnosis
You do not have authorization to read or write from or to the temporary storage.
The system uses the temporary storage when you display or change programs using the ABAP Editor.
The system checks to see whether there is a temporary version of the program.
If there is, a dialog box appears in which you must choose whether to use the temporary version or the database version.
The system fills the temporary storage when the editor crashes or you save a temporary version of the program.
System Response
You probably do not have the authorization object S_DATASET.
Procedure
Ask your system administrator to assign you the relevant authorization.*
Actually this problem never occurs frequently. User access the files very frequently creating around 200 Mb to 400 Mb in C:\Temp Folder per day per user. I observerd as per message that User is not have Access right to C drive. Once I get access from IT for that user he is able to display file. But before giving right he is able to display file. But suddenly he is not able to display. I am not getting exact reason why this problem occurs. Some users temp folder size is upto 700 Mb with no acces right to C Drive still he is able to see the image.
In DC20 I have kept C:\Temp as path for temp folder.
I have checked the links also
Request you to provide me
What is exact reason of the error?
Is the solution to problem is giving access rights to the user?
Do I have to give authorization object S_DATASET to a user?
With Regards
Mangesh Pande

Dear Amaresh
Thanks for your reply and solution.
So you mean to say thats this Authorization object has to be provided to user?
But my question is how the user was able to see the file even when this Authorization Object was not assigned.
He was able to display all file. But for particular DIR he is not able to display.
I have checked this thread
http://wiki.sdn.sap.com/wiki/display/PLM/Error26172withSAPGUI710+patch13.
User has SAP GUI 7.10
File Version 7100.1.0.1027
Build 0
Patch Level 0
Request your help
With Warm Regards
Mangesh Pande

DNS server cannot be created because the authoritative parent zone

I am working in 2008r2sp1. I tried adding DNS Server and DHCP Roles first. Then under DNS Forward Lookup Zones I added "mysite.com" as a New Zone.
Also I searched my computer for a "NTDS" folder and the only on I found was "C:\Windows\inf\NTDS".
A delegation for this DNS server cannot be created because the authoritative parent zone cannot be found or it does not run Windows DNS server. If you are integrating with an existing DNS infrastructure, you should manually create a delegation to this DNS server in the parent zone to ensure reliable name resolution from outside the domain "artisdextri.com". Otherwise, no action is required.
The folder C:\Windows\inf\NTDS> is not valid. Specify a valid path, including drive letter. For example: C:\NTDS.
dcpromo /unattend:"C:\Users\Administrator\Documents\ForestAdd.txt"
ForestAdd.txt
[DCINSTALL]
InstallDNS="yes"
NewDomain="forest"
NewDomainDNSName="mysite.com"
DomainNetBiosName="MYSITE"
ReplicaOrNewDomain="domain"
ForestLevel="4"
DomainLevel="4"
DatabasePath="C:\Windows\inf\NTDS>"
LogPath="C:\Windows\inf\NTDS"
SYSVOLPath="c:\Windows\SYSVOL"
SafeModeAdminPassword="pass1"

Hello,
If this is the first forest root DC, just ignore the information.
Check the blog:
A delegation for this DNS server cannot be created because the authoritative parent zone cannot be found or it does not run Windows DNS server.
http://blogs.technet.com/b/activedirectoryua/archive/2011/07/07/a-delegation-for-this-dns-server-cannot-be-created-because-the-authoritative-parent-zone-cannot-be-found-or-it-does-not-run-windows-dns-server.aspx
Hope this helps.

Field groups cannot be created in the OO context.?

Hi All,
The current ABAP command is obsolete while using Field Group in ECC6.0.
I am getting this error "Field groups cannot be created in the OO context." How to replace Field groups with some other statement.
Thank you,
Swapna.M

Hi Madhavi,
There is no other solution than rewriting the program, e.q. by creating internal tables for the fields now defined with FIELD-GROUPS in HEADER and ITEMS and looping over these tables.
Regards,
John.

Subworkflow instance cannot be created

Similar Messages

Maybe you are looking for