SUCCESS ! 9IAS Infrastructure-SuSE 8.2 Professional
It is finally running. Oracle thew us a slider on
this one. You will need to edit your postcfg and change
the invocation of oidca to use the 1.3.1 jre. The shell
script comes delivered to blow up because it uses the
1.1.8 jre. There is no way she is going in clean until
you make this change on Suse.
Also, get yourself a copy of ehtereal up and running.
I needed it to sniff the ldap request that was failing
when the password randomizer was failing.
It was trying to bind with a password of 'kr11wb2e' when
it was connecting to the ldap server.
I had to go into the ldap server via oidadmin and set the password to match was the applet was looking for.
After this I had all check marks on my runInstaller session!
All the services are up and running and they past the santity checks.
Now on to part 2.
I found this
Re: 9iAS R2 SuSE 8.2 ins_calypso.mk failure install
Yakub wrote:
Guidance Please,
I'm encountering make errors when installing Oracle 9iAS R2 9.0.2.0.1 on
SuSE 8.2 Professional. The following error is generated:
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile
/lv01/app/oracle/product/iasinf/webcache/lib/ins_calypso.mk
Thanks in Advance
Have had the same problem - did not care; it's WebCache, and
I don't have good experiences with it (V1 of 9iAS).
There's some documentation on Metalink (which did not
resolve the problem in RH9): doc id 144959.1
Edit $ORACLE_HOME/bin/genclntst, from line 98 onwards:
do
case "$objname" in
# REPLACE following 2 lines
# library=`expr $objname : '\(.*\)\(.*\)'`
# object=`expr $objname : '.*\(\(.*\)\)'`
library=`echo $objname | sed 's/(.*)//'`
object=`echo $objname | sed 's/.*(//' | sed 's/)//'`
libname=`basename $library`
echo $library > $WRKDIR/$libname.nm
echo $object >> $WRKDIR/$libname.objs
object=$objname
cp $object `basename $object`
esac
done
Rerun genclntst (still barks about DISCARD), should now
create libclntst9.a
Also rework the relink script:
Rework $OH/bin/relink:
line 50:
# if [ x${ORACLE_HOME} = x ] -o [ ${ORACLE_HOME} = "" ] ; then
if [ x${ORACLE_HOME} = x -o ${ORACLE_HOME} = "" ] ; then
line 102 (103 after the change above):
# MAKE="/usr/ccs/bin/make" # full path to make
MAKE="/usr/bin/make" # full path to make
HTH, YMMV, HAND
Similar Messages
-
Problems with installing 9ias infrastructure
Iam trying to install oracle 9ias application server on a windows 2000 professional edition.
so before installing application server iam trying to install 9ias infrastructure.
my initial attempts have failed so iam trying to reinstall it again after deinstalling the existing infrastructure.
the error iam getting is that the user who installed earlier is different from current user.
i use only one account on the machine. how can i correct the problem.
thanks
chakriThe server has 2 500mhz Pentium Processors.
Actually, I was able to bypass the issue by forcing the OUI to use 1 processer (Note 229478.1), but I am now having issues with the Infrastructure Schema Configuration Assistant. Even though it says it succeeded, the log says otherwise. -
Help: problem trying to re-install 9iAS Infrastructure
I'm using Windows 2000.
A while ago I installed 9iAS Infrastructure, and later I deleted the entire installation.
Since then, I have changed my computer's name. Now, when I try to re-install the Infrastructure, I'm getting an error message which says that I must use the same user login to install the Infrastructure as I originally used. I'm getting this message even though I deleted all the files (that I'm aware of) associated with the original installation, so, clearly, my computer still has a "memory" of the deleted installation somewhere.
Can you please tell me which additional file or files I must delete from my system to destroy this trace of the original installation? Please note that I am using the same downloaded files now to try to perform the installation as I originally used.
Thank you for your assistance.
HughHugh, here's the info you wanted:
PURPOSE
This article describes the procedure how to manually perform the actions to
create a "clean machine" on Microsoft Windows 95/98/NT/2000/XP and how to
manually remove all Oracle components (e.g.: oracle RDBMS database server,
IAS, OEM, client installations, etc) and services from your computer.
SCOPE & APPLICATION
This article is intended for DBA's on the Microsoft Windows platform.
WARNING:
1. Remove all Oracle components from your computer only as a last resort,
and only if you want to remove ALL Oracle components from your system.
2. These instructions remove all Oracle components, services, and registry
entries from your computer. In addition, any database files in the
subdirectories under ORACLE_BASE\ORADATA\ are also removed.
3. These procedures will also remove Oracle network configuration files,
user written scripts and any other user generated files that may be stored
in Oracle_Base directories.
4. Exercise extreme care when removing registry entries. Removing incorrect
entries can severely compromise your computer.
MANUALLY REMOVING ALL ORACLE COMPONENTS AND SERVICES FROM YOUR COMPUTER
Section A (steps 1-6) describes the removal of all Oracle components on
Windows NT,2000 and XP.
Section B (steps 1-4) describes the removal of all Oracle components on
Windows 95 and Windows 98.
A. Removing Components on Windows NT/2000/XP.
To remove all Oracle components from a computer on Windows NT/2000/XP:
1. Check privileges:
1.a. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle services (if any are running):
2.a. NT: Choose Start > Settings > Control Panel > Services.
2000,XP: Right click My Computer > Manage > Services and Applications >
> Services
2.b. If any Oracle services (their names begin with Oracle) exist and have
the status Started, select the service and click Stop.
2.c. Click Close to exit the Services window.
2.d. Close the Control Panel/Computer Management window.
3. Remove the entries in the Windows registry:
3.a. Start the registry editor:
Choose Start > Run > regedit
Note: On Windows NT you can use regedt32 instead. The searching
capabilities of regedt32 is limited compared to regedit. It will be
needed to be able to edit 32-bit entries in the registry. Since we
are not going to update any 32-bit entry it is not needed.
3.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the
Oracle Universal Installer (OUI). The default location is
C:\Program Files\Oracle\Inventory. If this value is different, make
note of it, so we can delete these files later.
Delete this ORACLE key.
3.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver"
3.d. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and remove
all keys under here that begin with ORACLE or ORAWEB.
3.e. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\...
...\Application and remove all keys under here that begin with ORACLE.
3.f. Go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\...
...\Uninstall and remove any entries related to Oracle.
3.g. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
3.h. Close the registry.
4. Clean up the environment settings:
4.a. NT: Choose Start > Settings > Control Panel > System > Environment tab
2000,XP: Choose Start > Settings > Control Panel > System > Advanced tab >
Environment variables.
4.b. At "System Variables" click on the variable PATH in order to modify
the value. For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;C:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN
4.c. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
4.d. If JRE was installed by Oracle, remove the JRE path.
4.e. If there is a CLASSPATH variable under "System Variables", first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
4.f. Check if there are any other Oracle variables set in "System Variables",
ORACLE_HOME, ORACLE_SID, TNS_ADMIN, JSERV or WV_GATEWAY_CFG. If these
exist, delete them also.
4.g. Click on APPLY and OK.
4.h. Close the Control Panel window.
5. Delete the software and icons:
5.a. NT: Choose Start > Programs > Windows NT Explorer.
2000,XP: Choose Start > Programs > Accessories > Windows Explorer.
5.b. NT: Go to %SystemDrive%\WINNT\PROFILES\ALL USERS\START MENU\PROGRAMS
2000,XP: Go to %SystemDrive%\DOCUMENTS AND SETTINGS\ALL USERS\...
...\START MENU\PROGRAMS
Note 1: These locations depend on whether OS was upgraded from NT, or
this was a fresh install of 2000/XP.
Note 2: To locate your System Drive, type in DOS-box: echo %SystemDrive%
and delete the following icons:
- Oracle Installation Products
- PRODUCT_NAME - HOME_NAME e.g.
Oracle for Windows NT - Dev6i
Oracle Reports 6i - Dev6i
Oracle Olap Client 2.2 - Dev6i
Oracle9i Lite
Oracle - OraHome92
5.c. Go to %SystemDrive%\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 3.b. and delete this directory.
Note: In order to successfully delete all files, you may have to reboot
your computer first, in order to clear Operating System locks
on those files.
5.d. Go to the temporary directory and delete all files and directories in here
(see note in 5.c.).
NT: %SystemDrive%\Temp
2000,XP:
%SystemDrive%\Documents and Settings\<username>\Local Settings\Temp\
5.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive (see note in
5.c.).
5.f. Close the Windows Explorer / Windows NT Explorer.
6. Finish the removal:
6.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin.
6.b. Reboot your computer.
6.c. Optionally: If you are on Windows 2000 or XP run the System Defragmenter
utility:
- from Control Panel, select Administrative Tools > Computer Management
- expand Storage, then select Disk Defragmenter
- highlight each virtual drive, in turn, and click Defragment
- reboot your computer when finished.
B. Removing Components on Windows 95 or Windows 98.
To remove all Oracle components from a computer on Windows 95/Windows 98:
1. Remove the entries in the Windows registry:
1.a. Start the registry editor at the MS-DOS command prompt:
C:\> REGEDIT
1.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the Oracle
Universal Installer. The default location is
C:\Program Files\Oracle\Inventory
If this value is different, make note of it, so we can delete these files
later. Delete this ORACLE key.
1.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver".
1.d. Go to:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall
and remove any entries related to Oracle.
1.e. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
1.f. Close the registry.
2. Clean up the environment settings:
2.a. Open your AUTOEXEC.BAT with an editor to modify the PATH variable.
For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;G:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN .
2.b. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
2.c. If there is a CLASSPATH variable set in the AUTOEXEC.BAT, first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
2.d. If JRE was installed by Oracle, remove the JRE path.
2.e. Save the AUTOEXEC.BAT file and close the edit.
3. Delete the software and icons:
3.a. Choose Start > Programs > Windows Explorer.
3.b. Go to SYSTEM_DRIVE:\WINDOWS\START MENU\PROGRAMS
and delete the following icons:
- Oracle - HOME_NAME
where HOME_NAME is the previous Oracle home name.
- Oracle Installation Products
3.c. Go to SYSTEM_DRIVE:\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 1.b and delete this directory.
3.d Go to SYSTEM_DRIVE:\Temp and delete all files and directories in here.
3.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive.
3.f. Remove any Oracle-related .INI files that may exist in the Windows
directory. The Windows directory may be found by entering
"echo %WINDIR%" from a command prompt.
Typical Oracle .INI files include ORADIM73.INI, ORADIM80.INI,
ORACLE.INI, ORAODBC.INI
3.g. Close the Windows Explorer.
4. Finish the removal:
4.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin
4.b. Reboot your computer.
RELATED DOCUMENTS
Oracle Installation Guides for Windows.
SEARCH WORDS
WIN95, WIN98, WINNT, WIN2000, Windows95, Windows98, WindowsNT, Windows2000,
de-install, deinstall, re-install, reinstall
Copyright (c) 1995,2000 Oracle Corporation. All Rights Reserved. Legal Notices and Terms of Use. -
Problem Linking 9iAS infrastructure on Linux - Please Help
My installation of 9iAS infrastructure fails at the linking stage.
The install documentation states that I must install the binutils patch,
binutils-2.11.90.0.8-13
from the Oracle Metalink site.
I have no Metalink account so am unable to obtain the patch from there.
My Red Hat Linux installation is 7.2 and my binutils package was at 2.11.90.0.8-12
I downloaded binutils-2.11.93.0.2-11.i386.rpm from the Red Hat site and installed it.
I still however get linking errors.
Do I need this specific (binutils-2.11.90.0.8-13) patch ?
If so, where can I get it from if I have no Metalink account ?
Many thanks,
AdrianHello.
I'm installing 9iAS R2 on SUSE Linux 8.0.
The installer failed when it relinks:
'Error in invoking target relink of makefile /home/oracle/8.1.7/precomp/lib/ins-precomp.mk'
I solved this problem editing the file:
$ORACLE_HOME/bin/genclntsh and change the following line
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh. Also make sure you have all the Oracle environments set!
The script should create new lib file!
After that hit retry in the error popup.
All the Infrasctructure installation finished succesfully.
I'll hope this help you.
Now I'm trying to install Portal and Wireless, but the installer says can't find the SSO Server (default port is 7777?).
If you can install it, please, let me to know it: [email protected]
Good luck !!!
Adolfo. -
Installation problem of 9iAS infrastructure
During the installation of 9iAS infrastructure, it cannot create the database and the error log shows the following message:
Total System Global Area 139228284 bytes
Fixed Size 283772 bytes
Variable Size 88080384 bytes
Database Buffers 50331648 bytes
Redo Buffers 532480 bytes
Create controlfile reuse set database iasdb
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE ??
ORA-01565: ???? 'K:\oracle9\9ias\infrastructure\oradata\iasdb\EXAMPLE01.DBF' ?????
ORA-27046: ???????????????
OSD-04012: @I.W$j$p$#,[2E (OS 140255737)
My working environment :
Chinese Windows 2000 Professional
Anyone have any suggestion about this error. please help me.
thks.Hi,
The first ORA error in the stack suggests that something is wrong with the file size (for file example01.dbf).
The OS-specific error message says:
OSD-04012
File size mismatch
Cause: The file to be re-used is either too large or too small.
Action: Specify the correct file size or delete the existing file.
Hope that helps,
Fredrik -
Help with 9iAS Infrastructure post-instalation
Hi,
Can anyone tell me where I'm going wrong with this? Having installed 9iAS infrastructure component (V9.0.2.0.1) on a Windows 2000 machine, everything seems to work fine. I can log in using the IAS_ADMIN password I have set up, start up all the services and run all the demos. However, once I reboot, I can no longer log in as IAS_ADMIN. It refuses to accept the password I have set up. Is there any post-installation stuff I have missed?
ThanksEven I am having the same problem.
I am still struggling to get this right but in the meantime you can start from the following URL:
Re: Alter table doubts
All the best.
-Puneet -
Starting and stopping 9ias Infrastructure and Application Server
I have Oracle9ias R2 Infrastucture and Application running on one machine (bad idea - I know) on Windows 2000. I had to restart the system and of course all the different instances from Infrastructure and Application Server started in the wrong order and now nothing operates at all. (It was fine yesterday - really, it was).
Could someone please give me a rough guideline on how to start these services, or instances in the right order.
Much obliged
WilliamSir,
Can you help me to do the installation of 9ias rel. 2.
I installaed 9ias infrastructure on separate m/c.
But unable to do single sign-on on 9ias server side.
How to configure it for web applicaions?
regards -
Hi,
I'm currently investigating single sign on and have a question about
the 9ias Infrastructure I need to install. I know that the infrastructure
will work with Oracle9i Database and with Oracle 8i if I upgrade the Net8
listener but I was wondering if it would work with Oracle 7 at all ?
Cheers,
MaggieOracle9iAS Infrastructure is an install type in Release 2 (v9.0.2). This install type installs a 9.0.1.3 database which contains all the
metadata Oracle9iAS mid tiers components such as Portal, Wireless etc use. Only the database we ship with is supported to contain the
Metadata. We do not support any other 9i or 8i or 7 databases to contain the Metadata.
The only exception is Portal. Portal metadata can be populated into any 8.1.7 or a 9.0.1.4 database.
Thanks
Pavna Jain
Oracle9iAS Product Management -
Start 9ias Infrastructure services error
When i finish installed the 9ias Infrastructure server, all services can start. But when i restart the machine, some server prompt error which i can't start that service.
I can't start BC4J,Single Sign On and http server. When i click the http server,it propmt out "An error was encountered while loading page. Failed to initialize configuration management user session.. Repository access failed Root Cause: Password could not be retrieved. Password could not be retrieved".
have anybody know that??please help!!Hi.
I had such problem!!!
Whether except for an infrastructure costs{stands} that нибудь by this machine????
What services will start, and what are not present???
And if there is an opportunity give by mail or icq, my coordinates
e-mail: [email protected]
icq: 343295831
Is always ready to help!!!
I have started in manual:))) -
De-installing 9iAS infrastructure tier
I have a server that has the 9iAS infrastructure installed. None of the 9iAS mid-tier instances require SSO or clustering. The questions I have is:
- Do these 9iAS mid-tier instances use the infrastructure if they are not using SSO or clustering?
- If they're not, is there any impact on any of the mid-tier instances if the 9iAS infrastructure is de-installed
- If they do, is there a safe way to remove the 9iAS infrastructure without impacting the mid-tier instances?
Thanks
JamesHowever, once you have associated any mid tier with infrastructure, it is not supported to remove the infrastructure except in one case. If you want to use FOrms and Reports without Infrastructure, following the instructions you can find in the white paper available on OTN, you can remove Infrastructure. This means you will not be able to use SSO capabilities with forms and reports.
So, if you are using J2EE and Web Cache and do not care about SSO or database managed clustering feature, you have to make that decision during install and do not associate with infrastructure.
Regards
Pavna Jain
Oracle9iAS Product Manager -
Oracle 9iAS Infrastructure Installation
I have been trying to install Oracle 9iAS Infrastructure on a machine. My database version 9.0.1.1.1 is running on a seperate machine. Every time I am trying to install, i am getting an error OC4J installation failed.
4) Last, the infrastructure comes with its own copy of database and application servers even you have installed or going to install any latest version of servers. It looks like Oracle doesn't integrate their products properly, the same story of Oracle CASE and database server.
Oracle Sales keep on saying they have got the best Application Server in the market. But I can't see the reason why the people will choose it. I saw a lot of messages from the forums saying the people tried to install the products on Linux for evaluation purpose. This will discourage people using the products if Oracle Support only provide solutions on the RedHat Advance Server.
I will try again with 9iAS 9.0.3 when I receive the package. Funny enough, I did ask people about their experiences on installation BEA Weblogic. It is smooth and only takes about half hour at all. -
9ias infrastructure installation
Hi:
i installed 9ias infrastructure, but when running oid configuration assistant, it failed during installation with an error "can`t find OID Server". Then other configuration assistans failed after oidca failed, like OPMN....
After that, i changed some environment variables, and started oidca, but and error message appeared "error configuring subscriber fails".
What can be wrong, has anybody got this error before. Should i start all over the installation from cero.
Please, somebody save my life......
Grantful......
Andres WongWhat I did was to let the Oracle create the infrastructure database and then shutdown the database and move the control file and datafile to other locations. There are more than 40 datafiles need to be moved. I am not sure you can change the database version.
Jean -
Update database installed with 9iAS Infrastructure?
Hi!
I'm about to install BIBeans on this system, which has Oracle 9i Database (9.2.0.4), 9iAS Infrastructure (9.0.2.3) and 9i Mid-Tier (9.0.2.3)... In the readme for the bibdemo schema, it says this: "Install (and upgrade, if you have an existing installation) the Oracle9i database. You must also install the required patchsets to get your database to version 9.2.0.3 or higher. Installation of the demo database schema will fail if the correct patchsets are not installed."
I previously patched the 9i Database instance up to 9.2.0.4, but I was under the impression that Infrastructure installed its own copy of the database... Is that correct? If so, do I also have to update the IASDB? I had a look at the readme for the 9.2.0.4 DB patch, and it looked like that could only be applied to the 9i Database Server...
Any help would be greatly appreciated.
Thanks!Even I am having the same problem.
I am still struggling to get this right but in the meantime you can start from the following URL:
Re: Alter table doubts
All the best.
-Puneet -
9iAS Infrastructure Redundancy
Is there a way to make the Infrastructure component of 9iAS redundant so that instances of 9iAS will have fault tolerant paths to the Metadirectory?
From what I can tell, it appear that in AS 9.0.2 hardware clusturing is the only option.
9.0.4 is supposed to have support for software based fail over -
Running a Dell server with win2000 service pack 3 and all updates
I have installed the ias infrastructure successfully.
I am abale to get into the OEM webpage to start and configure componets.
Upon restart of the server I am unable to gain access to OEM. I have verified password with EMTCL and it checks.
Any suggestion to what could be the matter.Running a Dell server with win2000 service pack 3 and all updates
I have installed the ias infrastructure successfully.
I am abale to get into the OEM webpage to start and configure componets.
Upon restart of the server I am unable to gain access to OEM. I have verified password with EMTCL and it checks.
Any suggestion to what could be the matter.
Maybe you are looking for
-
Black Screen Flashes!!
Once in a while, while i'm using "google" to search for something as i type or backspace using the keyboard the screen starts flickering a black screen. It would flicker once or twice as i'm typing. Nothing to bothering. i'm just concerned that it ma
-
Dear Experts, If my below query returns any rows, I want this to trigger an alert, I'm writing a shell script to do this, need help how to implement the SQL part of it. I don't think IF EXISTS is directly supported in oracle, is there a PL/SQL altern
-
Use of logbook or PM in high volume context
Hello, is "logbook" suitable for managing big volume of data (i.e. 3 to 10 millions of events like measurements per day) ? An idea could be to create a log entry per event of this type and only log measurement(s) when relevant and necesary ? Any insi
-
Arch 0.7.1 pre1 kernel headers
i have read that the kernel headers are included with the kernel packages, which is very nice because i have a sagem fast 800 modem and i need to compile drivers for it. Except for when i installed arch a few days ago i tried to compile my module and
-
can anyone help me out on this?