Success with 150+/ Verizon Packages in the DC Metro area?
Has anyone had any luck getting a 150+ package in the DC metro area?
I just went through 3 days of pain trying to upgrade my 75/75 to 150/150 and finally had to cancel the order. Now I'm waiting to see how bad my billing gets screwed up.
Tuesday I had the ONT port switched to copper/Router to copper. Still get 75/75 (85/85 really) download speeds. Onsite tech said it wasn't turned on to 150 yet, and give it an hour and left. Nice guy, left his personal number and such if I needed help. My Services still showed 75/75 online. That made sense with what Herb told me.
Tuesday night phone support they said it would speed up at 10pm when the billing system updated to 150/150. Ok no big deal.
Wednesday it didn't update in My Services, nor did my speeds improve. Networking support all say that I'm fully setup at 150, verified. Told me wait 24 hours for billing to catch up. My Services section of Verizon.com said I was still at 75/75 by the end of the night.
The Wednesday support guys insisted I run the optimizer tool on my system, which ended up breaking my Direct Access connectivity for work and screwing me for about 2 hours while I figured out what it broke. (sidenote: run "netsh interface tcp reset" to un-screw what it does). I had to uncable half my house to prove that gigabit directly off the router still showed the same speeds. (i have cisco grade networking equipment throughout my home that they can't trust, understandable for troubleshooting, no complaints there).
Today, it now says I have 150/150 AND 75/75 in My Services. And now they want to send another tech to my house on Sunday.
I gave up and just canceled the order and went back to my 75/75. I'm thinking they just can't handle it in my neighborhood, or that reminiscence of 75/75 still in my account was messing something up. Either way, too tired to keep trying.
To make things even worse, the automated phone system kept calling me trying to verify the system was fixed. Press 1 to close the ticket, press 2 to talk to technicians again. I naturally pressed 2 everytime it called so that they wouldn't ignore the problem and close my ticket. This happened 3-4 times a day throughout the whole process, starting around 830am or so, and stopping around 6-7pm i think.
Anyways, just curious if anyone actually got this working.
-Jim
123home123 wrote:
Is it possible that Universal Sports is carried on Ch. 460 under the name "NBC Plus" [WRC]? That channel range is devoted to secondary stations of the local network stations. The other stations have weather stations. Last fall, NBC discontinued their Weather Plus service and changed it to Universal Sports in most markets. I don't have Verizon FiOS yet and one of the main reasons was the absence of Universal Sports. If NBC Plus is indeed Universal Sports under a difference name, then I'd be much more likely to sign up for FiOS.
NBC Weatherplus is still on in the DC area on channel 460. I read on another forum that Universal Sports will begin on March 23 in the DC area on Channel 464
Similar Messages
-
I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg WilliamsBoilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB -
How can I sync my iPod with my computer without deleting the songs that are on my ipod
how can I sync my iPod with my computer without deleting the songs that are on my ipod
See this post by forum regular Zevoneer on transferring files from the iPod to your computer.
tt2 -
Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.
Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
Try what I suggest think to will help u -
My conversation with a Verizon Rep concerning the iPhone shipments.
I understand that a lot of you think that the CSR's are not very knowledgeable about the shipment of our phones, and that may be the case, however I thought I would post my conversation that I just had with one.
I added more to the bottome as I continued my chat.
JoAnn Ford: Great! Thank you for your help.
Please hold for a Verizon Wireless sales representative to assist you with your order. Thank you for your patience.
You are now chatting with 'Brittany'
Brittany: Hello. Thank you for visiting our chat service. May I help you with your order today?
JoAnn Ford: I pre-ordered an iPhone 4s. Im sure you are getting a million of these questions so I apologize ahead of time....
JoAnn Ford: But I didn't order mine until yesterday. I received a confirmation email, and a few hours later I received an email stating that my phone had shipped.
Brittany: I will be glad to help you with your phone concern today. Was this an upgrade order?
JoAnn Ford: But the link to track takes me to the USPS website and the tracking number doesn't work just yet. Do you know why this is?
JoAnn Ford: I just signed a 2 year contract and ported a number from sprint, then turned on an old VZ phone and ordered it as an upgrade on the website, but technically it is not an upgrade.
Brittany: The phone has not really shipped out yet could be my only guess. The phone is not set to ship out until the 13th.
JoAnn Ford: MY phone will ship the 13th? even though I ordered it yesterday and not on Friday?
Brittany: Yes, for pre-orders made online, it will ship out on the 13th overnight and delivered on the 14th.
Brittany: No problem at all.
JoAnn Ford: Great! Thank you for your help.
JoAnn Ford: No thanks! You have answered all of my questions.
JoAnn Ford: Can I ask you one more question>?
JoAnn Ford: My boyfriend call a rep earlier about this and he told me that the representative on the phone informed him that the shipments were pushed back until the 21st. Does this meant that that is not true??
Brittany: That is for people who places the order on the 14th. The day that it comes out in stores.
Brittany: Wait.
Brittany: Do you remember the time you placed your order?
JoAnn Ford: OK Great thanks!
Brittany: Was it after 6pm?
JoAnn Ford: Let me check when I got my confirmation
Brittany: Okay.
JoAnn Ford: At about 3:30 PM yesterday afternoon
Brittany: Yesterday. Hang on and let me check the email I have (it is about shipments made for the phone).
JoAnn Ford: Ok thanks
Brittany: It is showing that it will still ship out on the 13th and orders placed online after the 14th will have the phone delivery on the 21st.
JoAnn Ford: Ok! Hope thats true!
Brittany: It is. I am looking at the email right now. So just be on the look out on the 14th.
JoAnn Ford: Ok thanks alot
Brittany: No prob. Is there anything else I can assist you with today?
Brittany: Thank you for visiting Verizon Wireless, I look forward to speaking with you again. Have a great evening!
JoAnn Ford: No thanks! You have answered all of my questions.joannsford wrote:
I understand that a lot of you think that the CSR's are not very knowledgeable about the shipment of our phones, and that may be the case, however I thought I would post my conversation that I just had with one.
I added more to the bottome as I continued my chat.
JoAnn Ford: Great! Thank you for your help.
Please hold for a Verizon Wireless sales representative to assist you with your order. Thank you for your patience.
You are now chatting with 'Brittany'
Brittany: Hello. Thank you for visiting our chat service. May I help you with your order today?
JoAnn Ford: I pre-ordered an iPhone 4s. Im sure you are getting a million of these questions so I apologize ahead of time....
JoAnn Ford: But I didn't order mine until yesterday. I received a confirmation email, and a few hours later I received an email stating that my phone had shipped.
Brittany: I will be glad to help you with your phone concern today. Was this an upgrade order?
JoAnn Ford: But the link to track takes me to the USPS website and the tracking number doesn't work just yet. Do you know why this is?
JoAnn Ford: I just signed a 2 year contract and ported a number from sprint, then turned on an old VZ phone and ordered it as an upgrade on the website, but technically it is not an upgrade.
Brittany: The phone has not really shipped out yet could be my only guess. The phone is not set to ship out until the 13th.
JoAnn Ford: MY phone will ship the 13th? even though I ordered it yesterday and not on Friday?
Brittany: Yes, for pre-orders made online, it will ship out on the 13th overnight and delivered on the 14th.
Brittany: No problem at all.
JoAnn Ford: Great! Thank you for your help.
JoAnn Ford: No thanks! You have answered all of my questions.
JoAnn Ford: Can I ask you one more question>?
JoAnn Ford: My boyfriend call a rep earlier about this and he told me that the representative on the phone informed him that the shipments were pushed back until the 21st. Does this meant that that is not true??
Brittany: That is for people who places the order on the 14th. The day that it comes out in stores.
Brittany: Wait.
Brittany: Do you remember the time you placed your order?
JoAnn Ford: OK Great thanks!
Brittany: Was it after 6pm?
JoAnn Ford: Let me check when I got my confirmation
Brittany: Okay.
JoAnn Ford: At about 3:30 PM yesterday afternoon
Brittany: Yesterday. Hang on and let me check the email I have (it is about shipments made for the phone).
JoAnn Ford: Ok thanks
Brittany: It is showing that it will still ship out on the 13th and orders placed online after the 14th will have the phone delivery on the 21st.
JoAnn Ford: Ok! Hope thats true!
Brittany: It is. I am looking at the email right now. So just be on the look out on the 14th.
JoAnn Ford: Ok thanks alot
Brittany: No prob. Is there anything else I can assist you with today?
Brittany: Thank you for visiting Verizon Wireless, I look forward to speaking with you again. Have a great evening!
JoAnn Ford: No thanks! You have answered all of my questions.
You just ordered your phone yesterday and they're shipping it on the 13th?!?! Wow. Did you just go through the main menu and talk with a customer service rep? -
Any success with iTunes 8.2 resolving the CD burning issues 8.1 has had?
Just wondering whether I should attempt to install the 8.2 version if it still isn't allowing CD burning capabilities. I upgraded to 8.1 a couple of weeks ago and now I'm wondering if I should downgrade back to 8.0 until this major issue has been resolved. If I've read the various posts here correctly, the CD burning problems started with version 8.1 and not 8.0? I haven't attempted to burn with either version yet, so I'm trying to avoid the problems most other iTunes users have been having with it.
I have had the problems described here and after an exhaustive search, I did the following and it fixed the problem.
The issue is related to GEAR. Go to:
http://www.gearsoftware.com/support/drivers.php
and download the driver. I did this and *no longer* get the error about not being able to burn a disc or disk drives not found. I have Vista and this is with iTunes 8.2. Hope this works for you as well! -
When I attempt to view the construction of the new Hoover Dam bypass bridge, to do so, you must click on the icon (while holding down the CTRL key) on the site camera to bring the camera up. This will not work with my latest version of Firefox but I can do this with Microsoft's Windows Explorer 8.
== This happened ==
Every time Firefox opened
== After Firefox recently installedWorks for me on Firefox 3.6.6 - hold Ctrl and click on the Web Cam icon on the left side of this page - http://www.hooverdambypass.org/ - then hold Ctrl and click on the '''Click Here''' hyperlink in the popup window.
It crashed Firefox once for me, but after I re-opened Firefox it worked fine for 5 minutes as I tried the panning control and viewed both the Nevada and Arizona side cameras. The non-Java view worked for me too. -
Success with linux/mencoder/xvid on the Creative Zen
I just encoded a youtube video with mencoder (using the xvid codec) on Linux and I'm watching it on the zen right now.
I have to use the SD card on Linux for now, because I couldn't get gnomad2 to work with the Zen.I use mencoder to encode tv programmes. The first argument is the input file and -o specifies the output file. IIRC the threads argument splits the process in two to make it more efficient on a dual core machine. the scaling and croping arguments keep the original aspect ratio. I found this on another website somewhere, but I can't remember where.
mencoder /home/mythtv/recordings/2503_2007226232800.mpg -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=000:vhq:keyint=250:threads=2 -oac mp3lame -lameopts cbr:br=28 -ffourcc XVID -vf scale=320:-2,crop=320:240,expand=320:240 -o mighty-boosh-li've.avi
I usually put that on the SD card with videos, but libmtp => 0.2.4 works with the zen to copy files via mtp. -
Using airport express with a verizon hotspot for the internet.
I recently purchased a new laptop. Wanting to be able to print from my laptop and not having to connect the USB printer cable I purchased an Airport Express router. I use a Verizon HotSpot it get access to the internet. My problem is that I am unable to print data from the internet since I have to disconnect from it to gain access to my network printer. Any ideas how to be able to print data from the internet using my network printer?
I don't have one of these to verify, but have you tried reconfiguring your AirPort Express Base Station (AX) as a wireless client? In this configuration, the AX would join the wireless network created by your Verizon Hotspot device and its USB port would be enabled to share the attached USB printer.
To set up the AirPort Express Base Station (AX) as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Perform a "Factory Default" reset on the AX.
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX. -
From what I'm reading in these forums, this is likely an issue due to some 3rd party software / kernal conflict. I am going to run a diagnostic and perhaps someone here can help me evaluate the results and determine what software must be removed.
It's hard to describe what I'm seeing on screen. I've never seen anything like it. I get a number of lines that begin at the top left of my screen, about at the apple icon, and they spread out in a triangular pattern from left to right, top to bottom across my screen, while the entire screen flickers uncontrollably. I realize that iMacs from this era have screen issues, but since I can boot fine in safe mode, this can't be a hardware issue.
Any assistance is greatly appreciated!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Links with special characters work on the web, but are broken in RSS feed
Hi everyone,
I've been searching the forum, but haven't found anything relevant.
Here is my problem. Most embedded links on my blog posts work fine. However, sometimes I use links with embedded special characters. Here's an example link to a YouTube video:
http://www.youtube.com/watch?v=ugiY9t6fzo4
When I go to my blog on the web and click on the link, the link works fine. BUT, when I look at my RSS feed from the blog, the link gets transformed into:
http://www.youtube.com/watch%253Fv%253DugiY9t6fzo4
... which doesn't work.
Something (I presume iWeb?) replaces the "?v=" with "%253Fv%253D"
Obviously, I get a lot of e-mail from my RSS subscribers telling me about broken links.
What can I do? Does anyone else have this issue?I followed the topic concerning the Firefox photoalbum problem but I´m using Safari and the albums will not show up on the web !!!! I also exchanged the detailview and headercontrol *js which worked fine for opening the photoalbum on my harddisk with firefox. But when its uploaded to the server it won´t display and that in Safari!!!! On the published folder on my harddisk everything works fine
www.voyage64.com
just cklick on "photoalben" no album apears. Does anyone have the same problem with safari ???
regards,
David -
I spoke with a verizon agent on the phone. she said to go on internet and put information requested to get my $50.00 rebate even though I missed the date requested. I held on to it so that my husband could decide if he wanted to keep his droid. Can you help me. Thank you
We want your rebate process to be as smooth as possible donnag48! We do have an option via your My Verizon account to submit the rebate and gain access to the form online; however, please be aware this will not apply for expired rebates. We do recommend testing the device for the 14 day trial period to ensure it meets your needs. We do not recommend waiting much beyond that point to apply for the rebate.
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
How to Include JRE with our Setup Package
please help me,
i have created one swing application.i successfully created setup.exe using installsheild 11.It is working in my machine.when i run this in another machine .it is not working.iam using some external jar also in the appln.i put that jars into the jre/lib/ext in destination machine's directory then it works.
i want to include JRE with my setup package(first the setup should find whether the jre is installed or not ,if not it must insall JRE and put my external jar files into jre/lib/ext directory in destination machine then only my appln should insall).please give me a solution for thisWhat?!! It isn't considered legal to access a
root-level class from a higher level package?Well it's not now because your code won't compile, but
prior to 1.4 you could. I think the JLS has been
updated to say you can't import from the unnamed
namespace.Hmm! I must have missed that bit (not that I read it in any great detail, anyway!). I suppose it forces you to use packages, which is a good thing, IMHO.
What I was wondering about was, is the directory structure of classes strictly necessary, given that a class contains information on its package anyway? I know some IDEs don't require the source files to be in the right directory - they will check on the package statement, and locate the class file accordingly - but is it absolutely necessary for class files to be located according to their directory structure? I know the JLS says they have to be, but could the JLS be relaxed on this point, without breaking anything?
RObin -
Import Successful with warnings....ORA-01658 error..
Friends,
OS: RHEL AS 3.0
DB: Oracle 9iR2
When i try to import the dump, i am getting the below message.
"Import was successful with warnings"
when i check the log file there is
IMP-00017: following statement failed with oracle error 1658:
IMP-00003: ORACLE error 1658 encountered
ORA-01658: unable to create INITIAL extent for segment in tablespace PROD_DEFAULTPlease check the below, this is what i did before importing.
I want to import only the table structures without rows from the user "SMS" to "NMS".
After creating the below tablespace the free space in "/u02" is 3GB.
AM i have to change any value in the below statement?
CREATE TABLESPACE "PROD_DEFAULT" DATAFILE
'/u02/oradata/PROD_DEFAULT.dbf' SIZE 3072M REUSE
LOGGING ONLINE PERMANENT BLOCKSIZE 8192
EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO
CREATE TEMPORARY TABLESPACE "PROD_TEMP" TEMPFILE
'/u02/oradata/PROD_TEMP.dbf' SIZE 3072M REUSE
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576
CREATE USER "NMS" IDENTIFIED BY "SDF345345KLSDSD8K" DEFAULT
TABLESPACE "PROD_DEFAULT"
TEMPORARY TABLESPACE "PROD_TEMP"
GRANT CONNECT,RESOURCE TO NMS
[oracle@linuxdb oracle]$ imp system/password file=/u02/today1.dmp
log=/u02/today1.log fromuser=sms touser=nms rows=n buffer=8000000 commit=yNote:
Even if i omit "buffer" and "commit" the same error occurs.
where im making a mistake? Is there any changes i have to made in the create tablespace statement.
Please point out the mistake.
thanks & regardsnot for a single statement. for all the statements
its showing the error.instead of 512 tables
structures, only 490 tables structures were created.Because it was not able to allocate contiguous space in the tablespace.
>
actually i want to import "NMS_DEFAULT" tablespace's
table structures to "PROD_DEFAULT" tablespace.
also I want to import only the table structures
without rows from the user "SMS" to "NMS".Use FROMUSER/TOUSER for this and set the default tablespace for NMS as PROD_DEFAULT.
Now specify rown=N while running import or at the time of running export itself.
i created the "NMS_DEFAULT" tablespace with 3072M.
so i created the "PROD_DEFAULT" tablespace with the
same size.
actually i created the "PROD_DEFAULT" tablespace
using below output.
"select
dbms_metadata.get_ddl('TABLESPACE','NMS_DEFAULT')
from dual"You didnt allocate sufficient space to the tablespace, i guess.
Amardeep Sidhu
http://www.amardeepsidhu.com
Corrected a mistake...
Message was edited by:
Amardeep Sidhu -
ORA-24344: success with compilation error While creating workspace
Hi,
We had an instance with db 9.2.0.5 and HTML DB 1.56.
First we upgraded database to to 10.1.0.4.Then we upgraded HTML DB to 1.6.1(Upgraded html db 1.5 to 1.6, Then applied patch 1.6.1 patch - 4173133)
Logged to the HTML DB as an administrator for creating application developer's workspace. I have got the error "ORA-24344: success with compilation error" while creating the workspace.
We are able to create the workspace successfully on HTML DB 1.5.
Any help is highly appreciated.
Thanks, VenkannaVenkanna - Do you think the workspace creation was at least partly successful? I mean, can you login to it, can you see anything about it in the admin app, etc.? It would be useful to get a list of invalid objects in the new workspace's schema. If there are none, then get a list of invalid objects in FLOWS_010600.
Scott
Maybe you are looking for
-
Error while transporting database index into quality system
Hello, I am getting an error while transporting a new index in quality system. I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility. While transporting the
-
Tv not supported when connecting HDMI to ipad 30 pin connector running ios 8
tv not supported when connecting HDMI to ipad-2 30 pin connector running ios 8. Was working fine with ios 7.
-
Thunderbird does not open URLs in a browser. A bug?
Did a fresh install of Arch 0.8. Thunderbird 2 came with it. On my workstation URLs within an email-body aren't opened in an external browser. Neither in konqueror nor in Firefox. Is this a bug that I should report, or do you all have a working thund
-
Reimbursement type not displaying on India Claims Application
Dear Experts, We are implementing SAP EHP5 for India and want to use Claims application on ESS. After doing all the configurtation still we are not able to see Reimbursement Types on ESS. Please let me know the possible reason for the same. Thanks &
-
Disk image become corrupt after copied to portable hard drive
Every time I copy a .DMG image to my portable Hard Drive it become corrupted; and when I try to open the .DMG I get the error "Image Data Corrupted". I have formated the drive several times, I tried OS X Journaled, Fat32, both with GUID and MBR. I ha