Success with RaLink Chipset (PCI G)

Hello there,
I took a chance and bought a RoseWill PCI G card for my MDD. It uses the RaLink chipset and it works great! Downloading speeds have more than doubled (now > 9000 kbps) and the connection is rock solid.
The best aspect was the cost, ... $9.64 (out the door price!) at NewEgg. So if you're considering a PCI G card for your MDD, Ralink-based cards may work.
Later,
Jacobo

Pacifist is a small program that opens up .pkg installer packages and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package (for example, if you deleted Sherlock and need to reinstall it, but not the whole operating system), if you experience bugs in Installer.app that mess up your symbolic links, or if you just like a little more control over the installation process.
It can be downloaded free here. http://www.macupdate.com/info.php/id/6812
Open the enabler trough pacifist and click install. The program will place the items where they should be.

Similar Messages

Issues with Ralink chipset

we have a secure wireless network that supports both WEP and WPA and requires users to authenticate (LEAP and PEAP both supported). APs are 1130 and 1210 using 12.3.8-JA. Setup works fine except when client wireless device has Ralink chipset (Dlink and Belkin). Basically, the APs 'ignore' the clients. users can use theses Ralink based devices on non secured wireless networks and they work fine. i've tried various drivers for the clients (both card manufacturer and Ralinks) and also 3rd party clients like Funks Odyssey.
Does anyone have any suggestions
thanks andy

There's a good troubleshooting doc. The URL is:
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a008024aa4f.shtml

General Warning! [Ralink chipset + Windows 7 64bit + 4GB RAM = driver crash]

I just wanted to put a general warning out there.
There seems to be a pretty big problem with Ralink drivers right now, even ones automatically downloaded from Windows Update for at least 3 Ralink Chipset groups.
The problem:
There's some kind of messup when certain environments are the same. Windows 7 64 bit and over 3GB of RAM and a Ralink Wireless card/usb device. Once these variables are the same, most ralink wireless drivers will crash. The crash is very sneaky, it simply looks like your wireless connection has been switched to limited, however the wireless system can't and won't recover. You can try to disconnect or connect to another wireless system, but this doesn't work. You also won't be able to shut down or restart your machine, even after log off. If you do try and let the computer wait it out, eventually it will blue screen and reboot after a very long time.
This happens when the system transfers a significant amount of data or sometimes at a certain speed. For me it happened whenever I xfered a certain amount of data or once the card hit 5 MB speeds. But it varies with driver version and system. Sometimes it seemed random and just happened while surfing.
I have 2 usb devices with the ralink chipset and I've been able to reproduce the crashes everytime on several machines. The ONLY machine that does not mess up is a laptop with 2GB of RAM.
I decided to make this general warning, because I imagine some people are blaming their routers for the problem. I've read several posts on here where people have these symptoms and assume that it's their router.
The only fix/workaround right now is to remove some RAM, which of course isn't entirely convenient. I've contacted Ralink about it and heard nothing back, so I don't know if they've identified it as a problem or not yet. The other option is to get a usb device or card with another chipset brand....I purchased a usb device with the atheros chipset (the only cheap alternative to ralink, all the others are slightly more expensive) and that usb device worked PERFECTLY.
If you are using a pci card or usb device with a Ralink chipset and the computer specs I've mentioned and it actually WORKS, I'd love to hear from you right here. Remember, it has to be a Windows 7 64 bit system and 4GB or more of RAM. Make sure the system is 4GB and not 3.x because of an onboard GPU. The problem MAY happen on Vista as well, but I haven't tested it...all my systems are running 7.

Affected driver as of 10/31/2009
09/25/2009
2K/XP:1.4.7.0
Vista:2.3.7.0
Win7:3.0.7.0 [This is the only driver I've tested for Windows 7]
for chipset:
USB (RT2870 /RT2770 /RT307X /RT2070 /RT3572)
Message Edited by neoprimal on 10-30-2009 09:27 PM

Windows 8.1 on HP ProBook 4330s with Ralink RT3592 802.11 a/b/g/n 2x2 WiFi - BSOD - IRQ_NOT_LESS_OR_EQUAL

Same issues posted here:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/bsod-with-irqlnotlessorequal-when-fresh-install-of/790c6c20-40b3-483a-9cea-25916cbd9c13
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-on-hp-probook-4330s-with-ralink-rt3592/c9d8dd16-451a-4130-bdf8-2b1f1b72e587
I have a batch of 50x HP Probook 4330s that I would like to update to Windows 8.1 (x64).
To prepare and test an image I am attempting a clean install using the Enterprise DVD iso over network via WinPE boot from USB.
The installation eventually fails with a BSOD :-( IRQ_NOT_LESS_OR_EQUAL error and the system reboots after user input and the process cycles over and over.
See above link #1 for same issue from another user.
I am able to complete the Windows 8.1 install by disabling the Wlan card in bios.
Following the suggestions at:
http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Can-not-install-Windows-8-1-on-HP-4530s-with-Ralink-wi-fi/td-p/2955735
Then:
- Enable card in bios
- Boot to safe mode
- Disable card in device manager
- Reboot to normal windows
Then:
- Windows Update - ok
- Windows Update - optional driver update - Ralink RT3592... BSOD
- Any other Ralink driver....BSOD
- Any other HP driver for ralink card....BSOD
I have an open HP case.
I have contacted Mediatek for support via email address listed on:
http://www.mediatek.com/_en/07_downloads/01-1_windowsDetail.php?sn=5000
I posted in Microsoft communities but was directed here. I'm really hoping for a solution or some suggestions.
Regards
Andre Tomlinson
IT Manager
All Saints Grammar

Hi Andre Tomlinson,
Based on my research, we can find many same issues related to Ralink RT3592 wireless card.
Meanwhile, I analyzed the dump file from the same case provided by customer in other forum.
Crash DMP points to netr28x.sys.
Netr28x.sys is Ralink driver.
I suggest we try the following driver to test it.
http://www.driveridentifier.com/scan/driver_file_detail.php?inf_file_id=1717350&md5=d3fdb7b09dac78ff59ec7fabae612f9a&scanid=BF49AEABBD324C94A897C82A72A304E2&item_id=296364557&hardware_id=PCI%5CVEN_1814%26DEV_3592%26SUBSYS_1638103C
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If the issue still persists, since it is a driver issue, I suggest you contact HP support for further help.
Regards,
Kelvin hsu
TechNet Community Support

Ralink bluetooth pcie

The RALINK bluetooth pcie adapter will not install. I have tried the driver update listed as problem solved but still cannot install the driver. I have an HP h-8 envy 1450 desktop running windows 8.1. When I try to install the device windows finds the driver but ends with a cannot install

Hi:
I have read numerous posts from forum members with that card used in notebooks repoting issues with the bluetooth not working.
Not about the drivers not installing such as in your situation, but the bluetooth device simply not working even if the drivers are installed after updating to W8.1.

Ralink bluetooth PCIe missing

HI
MY NOTEBOOK PROBLEM IS RALINK BLUETOOTH PCIe MISSING AS WELL AS BLUETOOTH ICON NOT SHOWN IIN NETWORK DISPLAY BUT WIFI AND LAN IS PROPERLY WORKING CONDITION .
I USED HP PAVILION 15 NOTEBOOK PC WINDOW 8 SINGLE LANGUAGE 64 BIT AND PRODUCT NO.E6G12PA#ACJ .
THIS PROBLEM MIGHT BE SOFTWARE BUT I COULD NOTUNDERSTAND HOW DOES HAPPEN AND SOLUTION. SO I REQUEST YOU MAY KINDLY BE INTIMATED FOR YOUR SUGGESTION AND ENABLE ME TO USE WITHOUT SUCH TYPE OF PROBLEMS IN FUTURE.

Good Morning @rojina2004 ,
Welcome to the HP Forums!
It is a wonderful place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your wireless is working fine but you are missing your Bluetooth.
If you look in Device Manager is the Bluetooth card recognized, if not would you right click on the network adapter and scan for hardware changes.
Have you tried reseating the network card?
Understanding and troubleshooting Bluetooth wireless technology (Windows 8.1, 8, 7, Vista, XP)
You can also try these steps.
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link"
If you are still unable to pair with a Bluetooth device try the following:
Step 1. Search for "Change device" in the Windows 8 Start menu.
Step 2. Click on where it says Change device installation settings.
Step 3. Select the No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click Save changes to save the settings you just chose
As well you can try this
Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter
Step 2: Now find “Bluetooth Support Service” and double click on it
Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
Step 4. Click on “This Account”
Step 5: Now remove any passwords leave the password field blank
Step 6: Underneath the upper left title should be a hyperlink "Start" Click it
You can also check the Power Management tab and unchecked the box that says "Allow the computer to turn off this device to save power."
At any time you may contact HP support for assistance. As they can remotely access your system they may be able to quickly pinpoint the issue and resolve it for you.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

What is the recommended way to do multiple channel, single point sampling for control with an NI PCI-6255 in RLP?

Hello,
I am writing a driver for the M-series NI PCI-6255 for QNX. I have downloaded the MHDDK and have all the examples working. I have also enhanced the examples to do interrupt handling (e.g. on AI_FIFO interrupt or DMA Ring Buffer interrupt). My ultimate goal is to write a driver that I can use for closed-loop control at 500 Hz using all 80 channels of the NI PCI-6255. I may also need to synchronize each scan with a NI PCIe-7841R card for which I've already written a driver. I want an interrupt-driven solution (be it programmed I/O on an interrupt or DMA that generates an interrupt) so that the CPU is available to other threads while the 80 analog inputs are being read (since it takes quite a while). I also want to minimize the number of interrupts. Basically, I will need to collect one sample from all 80 channels every 2 milliseconds.
There are many different options available to do so, but what is the recommended technique for the NI PCI-6255 card? I tried using the AI FIFO interrupt without DMA, but it seems to interrupt as soon as any data is in the AI FIFO (i.e. not empty condition), rather than when all 80 channels are in the FIFO, so more interrupts are generated than necessary. I tried using DMA in Ring Buffer mode to collect a single sample of 80 channels and interrupting on the DMA Ring Buffer interrupt, which appears to work better except that this technique runs into problems if I cannot copy all the data out of the DMA buffer before the next AI scan begins (because the DMA will start overwriting the buffer as it is in ring buffer mode). If the DMA is not in ring buffer mode or I make the ring buffer larger than one 80-channel sample then I don't have a way to generate an interrupt when one sample has been acquired (which I need, because I'm doing control).
I saw something in the documentation about a DMA Continue mode in which it looks like you can switch between two different buffers (by programming the Base Count/Address with a different address than the current address) automatically and thereby double-buffer the DMA but there is no real documentation or examples on this capability. However, I think it would work better than the Ring Buffer because I could interrupt on the DMA CONT flag presumably and be copying data out of one buffer while it is filling the other buffer.
Another option would be DMA chaining, but again, I cannot find any information on these features specific to the NI DAQs.
I tried interrupting on AI STOP figuring that I could get a single interrupt for each scan, but that doesn't appear to work as expected.
I know that DAQmx on Windows has the ability to do such single sample, multiple channel tasks at a fixed rate so the hardware must support it.
Any suggestions would be appreciated.
Thanks.
Daniel Madill

Hello,
The interrupt that will happen nearest the times that you need is the AI_Start_Interrupt in the Interrupt_A group. This interrupt will occur with each sample clock. By the second time this interrupt fires, the AI FIFO should have the samples from the first conversion. If it is easier to use programmed IO, you can read the samples out of the FIFO until you get all 80.
Additionally, you can set the DMA to send samples as soon as the FIFO is no longer empty...instead of waiting for half full or full. This change will reduce latency for your control loop. You can set AI_FIFO_Mode in AI_Mode_3_Register to 0. By the second time this interrupt fires, you should be able to check how much data is in the DMA ring buffer and read the 80 samples when they are available. You can make the ring buffer larger than 80 samples if you see data getting overwritten.
There is no interrupt associated with 80 samples being available in the FIFO or 80 samples being available/transferred by DMA to the host. X Series has much more flexibility with these interrupts.
I hope this helps!
Steven T.

I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfull restarted my sy

I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg Williams

Boilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB

Success with adding an external eSATA drive to a Verizon FIOS DVR

August 4, 2012 - Success with adding an external eSATA drive to a Verizon FIOS DVR
I just upgraded from a Comcast DVR to a Verizon FIOS DVR. I upgraded because my old DVR was limited to 500GB (1/2 TB) on the internal drive and the new FIOS DVR allowed for a much larger external eSATA drive. Selecting a viable external drive for the FIOS DVR was easier said than done. The three drives listed on the Verizon web site as compatible with FIOS DVRs are no longer manufactured by western digital and are not available on the market.
The DVR that I received from Verizon was a Cisco "CHS 435 HD DVR" that came with a 500GB (1/2 TB) internal drive. This is one of their "Multi-Room DVRs" that allows other set top boxes (not DVRs) to watch videos recorded on it.
I selected a western digital "WD30EURS" eSATA disk drive because it was a follow on product to one of the three listed as acceptable by Verzion on their web page and it was 3TB in size. I ordered from amazon.com for $170.99. This drive is a "bare drive" so it does not come with an external encloser or a eSATA cable.
According to the Western Digial web site this is a AV-GP drive: "These drives are designed to last in high temperature always-on, streaming digital audio/video environments such as PVR/DVR, IPTV, and video surveillance systems."
http://www.wdc.com/wdproducts/library/AAG/ENG/2178-771131.pdf
I got a "Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD" to hold the drive for $34.39. I chose this one because it does not use a fan that could cause continious noise. The box is made out of metal so it cools itself as long as it is exposed to air (not covered up). This box comes with an external power supply that has a small transformer that plugs into a wall outlet.
Then I needed a eSATA cable. I got a "StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)" for $6.50 and a 3-foot version for $5.90. I went with the longer one so that the cable would be less likely to become accidentally unplugged if I need to move the drive or the DVR. The cables and the drive houseing came from the same Amazon provider so it saved me on shipping. The drive came from Amazon/Western Digial directly but they do not have external housings or eSATA cables on that site.
The total cost was $255.56 including shipping for all these items.
I went with the largest (3TB) drive from western digial's AV-GP line to avoid a future upgrade from a smaller drive to a larger drive. There is no way to copy videos from one external eSATA drive to another drive because they are formatted by the FIOS DVR in a propriatary format. That would mean that any future upgrade would require losing all recorded files during an upgrade. That also means that there is no way to back up the contents of the drive to protect yourself from hard drive failure.
The installer who setup the DVR did not want me to plug in the drive while he was there and explained that I was on my own when I attached this kind of personal device to the DVR. When I plugged in the new eSATA drive it was automatically discovered. I was asked by the DVR if I wanted to format the new drive. I answered yes and within 2 hours the drive completed formatting. I did not watch the boring format so it could have finished faster.
When I started recording new videos they go directly to the external drive automatically and avoids the internal drive. It had no trouble recording two HD shows and playing a recording at the same time. I now have 20 hours of HD video recorded and the 3TB external drive is 17% full. So far my experience with the external drive has been great. No problems or issues. Learning the new remote control, new DVR menu system, and web browser control of the DVR from a laptop is another story. It will take some time to figure out how to make all the new features work.
It took me a while to figure out how to make this work since the verizon web site made useless suggestions and pointed me to products that are not available any more. I could not tell if this really would work until I plugged it in and then I was pleasantly suprised that it did. I have had this working for 3 days without any issues. I hope this post makes it easier for you to add an external eSATA drive to your DVR.
Here are the three items ordered from Amazon to make this work:
Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Driv...
Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD
StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)

You are right. I can only access 2TB of my 3TB external drive. That gives me a total of 2.5 TB counting the internal (0.5 TB) and external (2.0 TB) drives. This is a significant improvement over the just the 0.5 TB internal drive. I have not been able to find a reason for this limitation. Cisco and Verizon do not mention any limits that I can find. I hope that a future BIOS upgrade could provide access to more space but this would probably require me to reformat the drive and lose everything recorded.
I paid $170.99 for the 3 TB WD30EURS drive at amazon. I could have gotten away with spending only $116.99 for the 2 TB WD20EURS drive. Not worth returning at this point so I will stay with it. Makes me glad I didn't buy the most expensive 6 TB external monster drive available from another company.
I bought: 3TB drive: Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Drive WD30EURS by Western Digital
I could have bought: 2TB drive: Western Digital AV-GP 2 TB SATA II Intellipower 64 MB Cache Bulk/OEM Internal Hard Drive - WD20EURS by Western Digital
Details of what I learned:
The external 2 TB drive now has 41 hours of HD video recorded and claims to be 34% full (66% free). My estimate would allow me to have aprox 120 hours of HD on the external drive (2TB) and 30 hours of HD on the internal drive (500GB) for a total of 150 hours of HD. This will keep me happy for the near future.
There is a hidden "diagnostic menu" that is not normally accessible or documented by CISCO or Verizon. This menu has a lot of interesting info on the inner working of the DVR. There was an obscure reference to this menu on another forum.
To access this diagnostics menu:
1) Get the DVR into normal live tv mode (no menu, no guide, no pause ...)
2) Go to the Cisco CHS 435 HD DVR (not the remote control) and press these buttons on the front of the DVR: Press both the Left Arrow "<-" button and "OK" button at the same time and hold them both down for aprox 5 seconds.
3) The "Verizon FiOS TV Diagnostics Menu" menu will appear. The menu can then be used by the remote control.
4) I chose "D03 Memory / HDD" and then "Hard Disk Information" and finally "OK"
A five page disk report appeared. With a little bit of interpretation I discovered:
The Internal Drive is know as "drive 1/hdc1" has 461 GB total space with 454 GB free.
The External Drive is split into two partitions "hdc2" and "hdc3" (aka two mount points).
"drive 2/hdc2" has 1007 MB total with 317 GB free
"drive 3/hdc3" has 1007 MB total with 974 GB free
The normal DVR menu has an "Eject" feature that allows you to stop the external drive and make it safe to remove it from the DVR without losing anything via an unplanned drive removal. This can be found at "DVR" button on remote then "Settings"->"External Hard Drive"->"Eject".

Order by in MATERIALIZED VIEW not work successfully with first column (ID)

Dears,
I am trying to create a Materialized View as below:
CREATE MATERIALIZED VIEW HR.MV_EMP
PCTFREE 10
MAXTRANS 255
TABLESPACE users
STORAGE (
INITIAL 65536
MINEXTENTS 1
MAXEXTENTS 2147483645
BUILD IMMEDIATE
REFRESH ON DEMAND
AS
SELECT *
FROM employees
where rownum < 5000 order by employee_id desc ;But while querying the MATERIALIZED VIEW, it did not work successfully as the data did not appear in the accurate order.
I tried to create the same MATERIALIZED VIEW but order by another column (Column Date), it worked successfully and the data appeared in the accurate order.
It means that MATERIALIZED VIEW not work successfully with the first column (id).
Can you please help me in this ?
Thanks & regards,,

A few pointers :
1. As has been pointed out, the ROWNUM has been incorrectly placed. ROWNUM values are assigned as rows are fetched from the source before the ORDER BY. You need to ORDER BY first (in a SubQuery) and then ROWNUM afterwards (outside the SubQuery).
2. I wonder why you want only the last 5000 EMPLOYEE_IDs. What if Employee_ID 1 is still an active employee (he is the founder, first employee and CEO ?). There could be very many "low" EMPLOYEE_IDs that are still active.
3. Logically I would expect some filter other than the ROWNUM ... ORDER BY to be used to select candidate rows. Then, an ORDER BY in the CREATE query would be unnecessary.
4. When querying the Materialized View you must explicitly ORDER BY (irrespective of whether you did or did not do an ORDER BY in the CREATE ...)
5. How do you expect to refresh the MV ? Will it always be a COMPLETE Refresh ? Remember that your "5000 employees" filter would likely exclude older employees at the next refresh. If you use some other filter, it should be consistent across all refreshs.
Hemant K Chitale

When i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

when i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

Photoshop Elements 1.0.1 seems like very old software 2001 I believe. Try asking in the Elements maybe someone there will be able to answer your question. Photoshop Elements

HT4060 iPad will not charge if hooked by USB to pc or plugged into wall. How do I know if the problem is with iPad, cable or power adapter. I have a 12, 10 and 5W adapters no success with any. Only one lightening cable so can't swap cables.

iPad will not charge if hooked by USB to pc or plugged into wall. How do I know if the problem is with iPad, cable or power adapter. I have a 12, 10 and 5W adapters no success with any. Only one lightening cable so can't swap cables.

I'm sorry but this is too funny to pass up.

I am trying to use apple configurator with ipads. I have been successful with all our ipads but 1. It will not allow me to add apps. The error I get is that it is refreshed but with errors e

I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either

Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile.

Is anyone having success with Alternatives Feature

Hi There Guys,
Since Logic Pro X arrived I have been using it and I really like it... I have been attempting to use Alternatives in my workflow since the feature arrived and with every update of Logic and OS X I am trying it again... But alas the problem is always the same. I am getting a SWOD whenever I try to use it.
I can create the alternative and begin working in the new alternative but whenever I want to switch between alternatives I am getting the SWOD and the console is over flowing with
12/02/15 23:40:38,872 Logic Pro X[21145]: dynamic_cast error 1: Both of the following type_info's should have public visibility. At least one of them is hidden. 16WCParamExtension, 30WCParamExtensionDynamicMarkers.
Then I have to force quit the app and re-open it.
I have not once had any success with this so called feature and at this point I am beginning to wonder whether others in here are having the problems I am having.
I have a few colleagues of mine which are using Logic Pro X but NOT using the Alternatives feature. I went to their place and there too the SWOD is appearing all the time when switching between alternatives...
I have no clue what to do here... So if any of you have a solution on how to get this to work... Please drop me a line
Thank You
I am on 10.10.02 and a Fully Loaded rMBP 2014

Thank you. We're getting close but this command created an error itself below.
What should I do?
rs-MacBook-Pro:sylpheed-3.0.1 r$ autoreconf -fvi
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal --force
configure.in:153: warning: macro `AMPATHGPGME' not found in library
autoreconf: configure.in: tracing
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in `.'.
glibtoolize: copying file `./ltmain.sh'
glibtoolize: Consider adding `ACCONFIG_MACRODIR([m4])' to configure.in and
glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in-tree.
glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.in:153: warning: macro `AMPATHGPGME' not found in library
autoreconf: running: /opt/local/bin/autoconf --force
configure.in:153: error: possibly undefined macro: AMPATHGPGME
If this token and others are legitimate, please use m4patternallow.
See the Autoconf documentation.
autoreconf: /opt/local/bin/autoconf failed with exit status: 1
rs-MacBook-Pro:sylpheed-3.0.1 r$ libiconv.2.4.0.dyliblibiconv.2.dyliblibiconv.dylib
-bash: libiconv.2.4.0.dyliblibiconv.2.dyliblibiconv.dylib: command not found
rs-MacBook-Pro:sylpheed-3.0.1 r$

Has anyone had had success with Time Machine and Airport Express 6th gen?

For the last six months I have attempted to use the Time Machine product to provide first level backup for my two MacBook Airs and iMac. Tryed a number of powered USB drives, tryed all of the current 10.8, 10.9 OSX software. The Time Machine product seems to work for about a month to six weeks and then fails with message about the file integrity or access problems. In all cases I can acess files on the drive and the only application that struugles with the AE usb drive is Time Machine.
You would think that if it works for a month it should work for a year?
I have purchased Carbon Copy Cloner and it seems to function without a problem and I think that I am probably better off with a once a day clone than a Time Machine with data integrity problems.
Has anyone had long term success with Time Machine and AE sixth gen?

You are connecting a USB hard disk to the new 802.11ac AirPort Extreme, not an Express, correct? If so, it works fine with both bus powered and self-powered drive enclosures, and I have no immediate explanation for what's going on.
You would think that if it works for a month it should work for a year?
Yes, besides the passage of time the only thing that is changing is the amount of available space on the backup volume, which could be a factor. Are you using separate drives for each Mac, or are they all being backed up to the same drive? If it's only one drive, is it partitioned or are they all sharing a single partition?
Are you sharing backup volumes with other, non-Time Machine files? That shouldn't cause the problem, but it's not a good idea.
What errors are being logged in system.log? Filter for backupd to find all Time-Machine related entries.

Success with RaLink Chipset (PCI G)

Similar Messages

Maybe you are looking for