Successfactors Employee Central to ADP: using SAP PI

Hi all,
My client wants to integrate Successfactors Employee Central with ADP. They want to make flat files for ADP using SAP PI.
Could you please let me know:
1. Is it feasible? If yes then is it going to be very complex ?
2.If there is a standard content available for this scenario?
3. What is the general architecture approach to be used ?
Regards,
Arijit

Hi Arjit,
Please follow the below link , it will help you.
HowTo: Configure Communication Channel with SFSF Adapter for SAP Process Integration (PI)
If you are using Eclipses else you can check on below links also.
Configuring SFSF Adapter Receiver Channel - Configuring the Communication Channels with the SFSF Adapter - SAP Library
Hope these link will help you.
Cheers,
Rakesh

Similar Messages

  • Using SAP  Program RSADRLSM02 for Employee Address Clean Up

    We have a requirement to clean up as well as maintain on an ongoing basis valid employee address data, so that any postal mailers are not returned 'Undeliverable'.
    We have seen documentation that says customers can use SAP provided program RSADRLSM02 (note 132948) , through which you upload  periodically  third party file ( USPS or any other provider file) into SAP.  The data then resides in cluster tables within SAP . There are BADIu2019s / User Exits available that can be implemented to go against this cluster data during address entry through ESS / PA30.
    However, SAP's recent direction seems to be towards DQM.
    Are there customers  using RSADRLSM02 still ? Any issues with this approach like performance or robustness of this load process ?
    We understand data may have to be mapped from the USPS file to what RSADRLSM02 needs.
    Thanks for any inputs in advance.

    Bumping it up to see anyone has comments.

  • How to use SAP Business Workflow along with Interactive Adobe Form

    Hi Experts,
    I am working on SAP Business Workflow since last couple of years.
    Now i have got a new Project where client wants to use SAP Business Workflow along with Interactive Adobe Form.
    I am new to Interactive Adobe Form and Portal thing and i really dont know from where to start.
    We have one central system and 2 local systems. when we do create a Material document using adobe form workflow should trigger and notification should go to group of users who can approve or reject it, once they approve it document gets created in central system and replicated to 2 local system through ALE.
    In the Local system they do extend the document to different plants, again workflow triggers and notification will go to Managers inbox for the approval.
    Once the final approval done data should go and store in SAP.
    Now here i have couple of Questions.
    1. In SAP R3 Business workflow when i execute the workitem from the inbox i do get the application screen ( i.e. MM01 MRP View ) , what is going to happen if the same case i have with Adobe form?? is it possible or do we have to design a adobe form and we will have to map the fields with backend application??
    2. Do i have to maintained 3 separate Org Structure for 3 different system or using UWL  i can manage the show
    3. Untill final submit is not done, where the application data is going to be, is there any kind of buffer that we will have to keep it or its there with XML file??
    Please help me out.
    Thanks in Advance.
    Regards,
    Manoj

    Hi Manoj,
    Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
    1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
    2) Am not clear or your System landscape to advice you in these regards.
    3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
    Hope this helps.
    Regards
    <i><b>Raja Sekhar</b></i>

  • Can I use SAP HR to drive ESS Portal user creation?

    Hello
    We are implementing a new instance of SAP HR and Portal for ESS and MSS and I am not sure of all the steps that need to be completed so any guidance / tips would be greatly appreciated.
    Company currently has an LDAP - but not used extensively. Not all employees currently in LDAP as not all have network ids. All employees will have a SAP account to enable ESS (via Kiosks etc).  ESS iViews in Portal will call SAP HR and possibly SAP BW.  We have an instance of SAP already and user admin maintained via CUA - this will continue.
    Scenario:
    My initial thoughts are that we try to use SAP HR as the leading system to drive the ESS Portal users and access.  Basically I want to create the user in SAP and assign them an ESS SAP role... then through syncronization have the user created in the Portal and have the correct ESS Portal assigned (in the Portal)
    My thinking so far is to go the following way;
    1) Create User Master Record in SAP (SU01)
    2) Hire employee into the org structure (via HR processes)
    3) Populate Infotype 0105 with SAP username
    4) Populate Infortype 1016 - with SAP role to be assigned to allow ESS access (not sure about this aspect) or role could be assigned in 1) above
    I am not sure of the next steps - I think there must be a way in an SAP table to map the ESS SAP role to the ESS Portal Role (is this via WP3R?)
    then I am hoping that a standard job can be run (is this RSLDAPSYNC_USER) that will create the user in the Portal (UME?) and assign the correct Portal role ?
    (obviously configuration needed)
    For MSS and HR Power users - we would continue to assign SAP roles via SU01.
    Can anyone assist with;
    - Is my thinking correct in terms of how this should / could work?
    - in SAP how can I map SAP Roles to Portal Roles ?
    - will syncronization in SAP create the user in Portal and assign the role ? what do I need to configure?
    Thanks in advance

    Dear Michale,
    I just dont know if this can throw some light on your prob.'
    In our Orgn we had around 250 ess users and 200 sapr/3 users. Some of the r/3 users also logon to ess via their r/3 uname and password.
    What we have done is like follows:
    1. Created a role for only the ess users ZHRESS. For this i asked the HR functional people with sap_all profile to do all the job which the ESS users are supposed to do and tracer the authorization via tcode st01. We created the role on the basis of this trace report.
    2. For the purely ESS users we created the users via tcode HRUSER and assigned then with the above role.
    3. For the R/3 users who are supposed to avail the ess facility we assigned them with the role ZHRESS role in addition to the other roles assigned to them to carry out their normal R/3 transactions. Then we mapped their R/3 uname to their employee no via PA30 infotype 105.
    4. Tcode HRUSER saved time  which would have consumed had we done it via su01 and moreover it picked Name etc data from the HR master table. In HRUSER tcode , setting the user attributes helps to define what roles the users are to be assigned, what should be their initial password etc.
    Pl let me know if it satisfies you querry.
    Regards

  • Advantages of using SAP

    hai
    advantages of using SAP some implemented some manufating companys
    sridhar.v
    [email protected]

    Hi Vegendla
    Technology playing a major role in today's business environment. So many companies and corporations have adopted information technology on a large scale by using Enterprise Resource Planning (ERP) systems to accomplish their business transaction and data processing needs. And in this technology SAP R/3 plays a significant role when compared with other similar tools.
    ERP system takes a lead role because of some of the following reasons:
    Many large corporations use several different and separate information systems, often because they have merged with and/or acquired other companies with varied systems. An ERP system integrates these separate information systems and results in improved data reliability and processing efficiency. ERP systems are not only used by large corporations but becoming popular with small to mid-sized companies also.
    Simplify business transaction processing and thus work load is reduced.
    Some of the main advantages of using SAP R/3 are listed below:
    SAP's R/3, introduced in 1992, is the most used ERP system in the world.
    The R/3 software package is designed to allow businesses to effectively and efficiently operate a variety of business processes within a single integrated information system.
    The software is customizable using SAP's proprietary programming language, ABAP/4. R/3 is scalable and highly suited for many types and sizes of organizations and runs on six different platforms.
    SAP’s R/3 has been designed to be the best ERP system in the four areas of human resources, financial, supply chain management, and marketing. R/3 is also an international product, and meets the local fiscal, language, and tax requirements of most countries.
    SAP Manufacturing:
    Drive Manufacturing at the Speed of Business
    Manufacturing isn't getting easier. You're under constant pressure to deliver innovative products, respond to customer demand quickly, and eliminate costs.
    Enter SAP Manufacturing. This powerful solution integrates manufacturing with your other operations, so you can identify changes in demand and supply and rapidly respond to new customer requirements.
    SAP Manufacturing is the only comprehensive solution for managing manufacturing operations with embedded Lean and Six Sigma – empowering you to deliver superior responsiveness and performance. And since it's built on the SAP NetWeaver platform, SAP Manufacturing connects seamlessly with your entire enterprise, including your current plant floor infrastructure. So you can accelerate time-to-value and lower total cost of ownership.
    <b>SAP Manufacturing gives discrete and process manufacturers functionality to:</b>
    Coordinate operations with partners and suppliers
    Detect and resolve exceptions and performance deviation in real time and at low cost
    Institutionalize Lean and Six Sigma processes and monitor production to drive continuous improvement
    Comply with environmental, health, and safety standards
    Improve employee productivity and create a high-quality work environment
    With SAP Manufacturing, your management and production departments gain real-time visibility into key data – enabling them to act quickly. Managers can document, track, and interpret quality and performance using rich analytics capabilities. Production teams can leverage role-based applications for plant managers, production supervisors, maintenance supervisors, and quality inspectors to detect and respond rapidly to exceptions and variances – and deliver superior performance.
    SAP Manufacturing helps you to plan, schedule, sequence, execute, and monitor all your manufacturing processes optimally. So you can achieve higher profits and marketplace wins.
    Reward if useful to u
    null

  • Configuration for Central Monitoring System in SAP Solution Manager.

    Hi Folks,
    I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
    There are couple of items on which  I am really confused.
    In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
    it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    Can you guys please help me to configure properly?
    One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    Also, is there any document which clearly explains the setup of  Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
    I have SAP Solution Manager 7.0 EHP1.
    Thanks.
    Jennifer

    Hi,
    >
    > it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    >
    You should created this user in working client.
    > Can you guys please help me to configure properly?
    >
    > One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    >
    You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
    Thanks
    Sunny

  • Advantage of using SAP SRM

    Hi,
    Could any one please explain the advantages of using SAP SRM over MM module. As per me we can de most of the activities in MM except some vendor related activities (and that even if SUS is used).
    Thanks in advance.
    Regards,
    Lalit

    Hi Lalit,
    All advantages of using SRM and MM module is in Plan-Driven Procurement documentation on service.sap.com/instguides -> SRM.
    Generally planning in APO or MRP in an ERP system calculates the quantity and materials required. This requirement can be transffered to the EBP system. Requisitions from SAP Plant Maintanance or Project System are also possible requirements.
    The requisitions are passed to EBP. If the data is complete and unique, purchase orders can be created automatically. If the data is missing, the proffesional purchaser has to complete the missing information in Sourcing or via Process Purchase Orders. An option for the professional buyer is to assign un-sourced PO to an RFQ and send it out for bids.
    The proffesional purchaser completes the orders, assings source of supply, add or deletes item.
    Once the order is complete it is issued automatically to R/3. XML is the upcoming medium, since the data can be automatically integrated in more and more supplier's systes, or You can send orders by e-mail, fax or print them.
    Goods receipt is either done in EBP by supplier via an XML confirmation, by employee who requested the item by general goods recipient or in the backend system. Inventory is updated in backend.
    The invoice is processed in EBP manually by the requestor or an accountant submitted by the supplier via an XML invoice, possibly from SUS or backend system.
    You can also look in Self-Service Procurement documentation on:
    http://help.sap.com/saphelp_srm50/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
    Regards,
    Marcin Gajewski
    Please assign points for useful answer.

  • 'Change your password' error when log to designer using SAP Authentication

    Hi All,
    Here is the scenario. I want to create a universe on BW.
    1. I try to log into designer using SAP authentication (by choosing SAP as the authentication option)
    2. In the system name its the name of the CMS
    3. The username and password that I entered were for my SAP system. (Yes, my SAP role is already present in CMC)
    4. After I entered, I got a message saying ' You must change your password to continue. If you do not change your password, your account might get disabled'.
    5. I am prompted with dialogue box to change my password.
    6. After I enter a new password (fairly complicated), it gives an error Failed to change password/ Details : [repo_proxy 15]. Sessionfacade:: changePassword - User password has not been updated (Incorrect password).
    I know that's not the case because I am able to log into SAP GUI and into CMC using my SAP credentials.
    Any advice please ? Why is this happening in designer ?

    Hi,
    Your issue may be fixed in FP1.8 with the following reference:
    ADAPT01229385
    Description:
    +If an Enterprise alias is created for a SAP user accounts in the Central Management Console (CMC), and set to change their+
    +passwords at the next log on, the SAP users may be unable to log on to applications with their SAP credentials.+
    +This problem happens even after the Enterprise alias is removed from the SAP user accounts in the CMC.+
    I hope this helps.
    regards,
    Henry

  • Change Employee team to another using DI

    Hi There,
    I have a request from customer are they want to change Employee from team to another, i'm using SAP B1 8.81 and i was try to find all property in Object Team, i just founnd property to add employee to Team by
                Dim RetVal As Long
                Dim oTeam As SAPbobsCOM.Teams
                oTeam = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oTeams)
                oTeam.GetByKey(2)
                oTeam.TeamMembers.EmployeeID = EmpID
                oTeam.TeamMembers.RoleInTeam = SAPbobsCOM.BoRoleInTeam.borit_Member
                oTeam.TeamMembers.Add()
                oTeam.Update()
    Any suggestion to remove employee from old team and move them another team by using DI, Pls help
    Thanks and Best Regard.

    Hi,
    Please repost above discussion in http://scn.sap.com/community/business-one-sdk to get quick response.
    Close this thread by marking helpful answer.
    Thanks & Regards,
    Nagarajan

  • Timewrite across company codes using SAP CATS.

    Hi Experts,
    Want to know please, Can we timewrite across company codes using SAP CATS.
    Thanks,
    Muhammad

    Hello,
    You surely can.
    When the employee enter his time there will be the respective field to identify the cost center or the one you want to assign.
    If you are using the Worklist, bear in mind to correctly have those codes assigned and I would mention to filter the worklist via CATS0001 user-exit to show only the correct ones (which are relevant for that employee).
    Regards,
    Bentow.

  • Central User Administration using EP

    Hi,
    Can any body tell me how we can do central user Administration using EP. My landscape has multiple SAP systems, BW system and EP system. How should we go about it?
    Any help?
    regards,
    Sujesh

    HI Sujesh,
    EP is not able to serve as a hub for central user administration in my opinion.
    You can connect EP to several user stores like LDAP servers (including Microsoft ActiveDirectory) and SAP Systems.
    So
    a) you store all your users in an LDAP and connect all your SAP systems to that LDAP
    b) you declare one of your SAP systems as central user administration (CUA) "master", connect all other as "slaves" and connect the EP UME to the master
    But in any way - there is no GUI inside the EP where you can administer all user related things like roles from all systems, etc. This can only be done in an ABAP system.
    Hth,
    Michael

  • ADP to SAP table maps

    Experts,
    I am looking for table relationships between ADP and HCM infotypes, for loading employee master data from ADP into SAP. I do have an 1800+ page document with all the tables in ADP, however, I was hoping there should be one map available...
    Edited by: NW on Sep 23, 2009 9:58 AM

    Experts,
    I am looking for table relationships between ADP and HCM infotypes, for loading employee master data from ADP into SAP. I do have an 1800+ page document with all the tables in ADP, however, I was hoping there should be one map available...
    Edited by: NW on Sep 23, 2009 9:58 AM

  • Using SAP ECC as a MDM Hub

    I would like to know the pros and cons of using SAP ECC as a MDM hub instead of using standard MDM tool like SAP MDM.  Many folks in my company thinks that it is  possible by adding some  governance functionality & quality tools to standard SAP ECC. 
        Please  let me know if this is a good idea , if not what are the reasons.
    Thanks

    Hi,
    To answer in general terms, It is like going to a physician for surgery instead of going to a surgeon.
    There is no restriction of exploring ECC for master data & governance. But SAP's EIM solution products like SAP NW MDM are result of growing market requirements for speciality tools. Read more about customer success stories of using SAP NW MDM solutions at - http://www.sap.com/platform/netweaver/components/mdm/index.epx
    Few highlights -
    SAP MDM is designed to be a central hub of master data. MDM will maintain global attributes that can be sent to different target systems including your ECC. Then each of your target systems can maintain their local attributes in additon to the global attributes sent by MDM. MDM will maintain the global unique ID's thus providing a single version of truth for your master data across the organization. SAP NW MDM can be integrated with SAP BOBJ DS and a continuous cleansing/validating/removing duplicates can be achieved. Master data Address cleansing/D&B enrichment can be achieved with real time services present in BOBJ DS & MDM. Enterprise Portal/BPM has standard MDM API's providing data governance capability at its best.
    SAP ECC on other hand is a transactional system/operational system. The load on ECC of maintaining global master data will unncessarily affect the performance. Maintaining master data, removing duplicates, running data vaidations/assignments for cleansing data, then adding central data maintenance with data governance is like adding load on your transactional system. The outmost priority of ECC system is its performance and availability.
    Similar SDN thread - MDM Vs ECC
    Thanks,
    Shambhu.

  • Send email on external email address using sap workflow

    Dear All,
    I wat to send email( on external email address) to all users on under one position in org unit using sap workflow.
    I have retrived all users under given postion using FM   'RH_OM_GET_HOLDER_OF_POSITION'.
    Please let me know how to get their email ids.
    Thanks & Regards
    Rajshree

    Hi Rajasree,
    You can get the email address by passing the PERNR of employee and read the infotype '0105' (communication) with subtype '0010'.
    DATA: lt_p0105 LIKE p0105 OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'HR_READ_INFOTYPE'
       EXPORTING
    *   TCLAS                 = 'A'
        pernr                 = pernr
        infty                 = '0105'
        begda                 = sy-datum
        endda                 = sy-datum
    *   BYPASS_BUFFER         = ' '
    *   LEGACY_MODE           = ' '
    * IMPORTING
    *   SUBRC                 =
       TABLES
         infty_tab             = lt_p0105
      EXCEPTIONS
        infty_not_found       = 1
        OTHERS                = 2.
    IF sy-subrc <> 0.
    * Implement suitable error handling here
    ENDIF.
    READ TABLE lt_p0105 WITH KEY subty = '0010'.
    email = lt_p0105-usrid_long.
    Regards,
    Pipit

  • SF Employee Central Associate Level Certification Exam preparation

    Folks,
    Did anyone give or know of any person who has given the new EC Associate Level Certification Exam rolled out by SAP / SF from 1st of October 2014? This is the new way of getting certified.
    I would like to know how do we prepare for it apart from the EC Academy training and going through Implementation Handbooks? I have already completed the EC Academy and want to practice some questions and the pattern. Is there any way we can get sample questions for preparations? Since this is a new format for EC certification, people are nervous on how to best prepare for it.
    The format includes 80 multiple choice questions with the pass mark being 63. On the certification website (SAP Learning Hub) there is a pdf with sample questions but there are only 9 questions. Need a few more.
    Any information / lead will be highly appreciated.
    https://training.sap.com/shop/certification/c_thr81_1405-sap-certified-application-associate---sap-hcm-cloud-employee-central-g/
    Thanks,
    Yash

    Hi Jignya Joshi,
    As per your recent post, you have completed your EC Certification (C_THR81_1405).
    Could you please provide how to prepare for exam and how is the exam for you?
    From where i can complete EC Mastery/academy? i have access to 'Cloud Learning Center' (https://sa.plateau.com/learning/user/personal/viewPersonalHome.do?ignoreBackLink=Y)  is this sufficient to complete?
    For each course structure 'launch quiz' link is there, is these quiz questions are helpful for certification?
    Thanks,
    Seshu Chunduri.

Maybe you are looking for