Successful conversions of all type of vids to ipod format!

Hey all, I just got my vid ipod last week and have loaded tons of vids, some movies like Star Wars ep 3. I have been using a software called Total Video Converter. It can convert all types of vids (even HDTV transport streams, VOBs, etc directly to ipod mpeg4 format). Just make sure you select 320 x 240 resolution for standard 4x3 format vids or 320 x 176 custom for 16:9 vids. I use this on a XP Windows machine. I tried Quicktime Pro but had issues with lack of sound. TVC is also super fast. Has internal engine and can also convert wmv via directx.

No but only 45$. It is so well worth it. BTW, fyi I think it is windows based!
Check it out here:
http://www.effectmatrix.com/
Look what it can convert -
Main Features of Total Video Converter:
Convert all kinds of videos to mobile videos or audios (mp4, 3gp, xvid, divx mpeg4 avi, amr audio) which are used by cellphone, PDA, PSP, iPod;
High compatibility and high efficiency for Importing RMVB or RM video/audio;
Convert various videos to MPEG videos compatible with standard DVD/SVCD/VCD;
Rip DVD to popular videos of all sorts;
Extract audio from various of videos and convert which to all kinds of audios (mp3, ac3, ogg, wav, aac);
RIP CD to audios of all sorts directly.
Total Video Converter supports reading the following file formats:
Video Formats:
¡¤ Rmvb(.rm,.rmvb)
¡¤ MPEG4(.mp4)
¡¤ 3gp(.3gp, 3g2)
¡¤ Game Psp(.psp)
¡¤ MPEG1(.mpg, mpeg)
¡¤ MPEG2 PS (.mpg, mpeg, vob)
¡¤ MPEG2 TS (DVB Transport Stream)
¡¤ Ms ASF(.asf, .wmv)
¡¤ Ms AVI(.avi)
¡¤ Macromedia Flash video FLV (.flv)
¡¤ Real Video (rm)
¡¤ Apple Quicktime(.mov)
¡¤ FLIC format(.fli, .flc)
¡¤ Gif Animation(.gif)
¡¤ DV (.dv)
¡¤ Video Formats Dx9 Directshow can open
Audio Formats:
¡¤ CD audio(.cda)
¡¤ MPEG audio(.mp3, mp2)
¡¤ Ms WAV(.wav)
¡¤ Ms WMA(.wma)
¡¤ Real Audio (.ra)
¡¤ OGG(.ogg)
¡¤ Amr audio(.amr)
¡¤ AC3(.ac3)
¡¤ SUN AU format (.au)
¡¤ Macromedia Flash embedded audio(.swf)
¡¤ Audio Formats Dx9 Directshow can open
Game Video Formats:
¡¤ Technologies format, used in some games(.4xm)
¡¤ Playstation STR
¡¤ Id RoQ used in Quake III, Jedi Knight 2, other computer games
¡¤ format used in various Interplay computer games,Interplay MVE
¡¤ multimedia format used in Origin's Wing Commander III computer game,WC3 Movie
¡¤ used in many Sega Saturn console games, Sega FILM/CPK
¡¤ Multimedia formats used in Westwood Studios games, Westwood Studios VQA/AUD
¡¤ Used in Quake II, Id Cinematic (.cin)
¡¤ used in Sierra CD-ROM games, Sierra VMD
¡¤ used in Sierra Online games, .sol files
¡¤ Electronic Arts Multimedia, Matroska
¡¤ used in various EA games; files have extensions like WVE and UV2
¡¤ Nullsoft Video (NSV) format
Total Video Converter supports generating the following file formats:
Video Formats:
¡¤ MPEG4(.mp4)
¡¤ 3gp(.3gp, 3g2)
¡¤ Game Psp(.psp)
¡¤ MPEG1(.mpg, mpeg)
¡¤ NTSC, PAL DVD mpeg
¡¤ NTSC, PAL SVCD mpeg
¡¤ NTSC, PAL VCD mpeg
¡¤ Ms Mpeg4 AVI(.avi)
¡¤ Divx AVI(.avi)
¡¤ Xvid AVI(.avi)
¡¤ H264 AVI(.avi)
¡¤ Mjpeg AVI(.avi)
¡¤ HuffYUV AVI(.avi)
¡¤ Swf Video(.swf)
¡¤ Flv Video (.flv)
¡¤ Gif Animation(.gif)
¡¤ Mpeg4 Mov(.mov)
¡¤ Apple Quicktime(.mov)
¡¤ FLIC format(.fli, .flc)
¡¤ Gif Animation(.gif)
¡¤ DV (.dv)
Audio Formats:
¡¤ MPEG audio(.mp3, mp2)
¡¤ Ms WAV(.wav)
¡¤ Ms WMA(.wma)
¡¤ OGG(.ogg)
¡¤ Amr audio(.amr)
¡¤ AC3(.ac3)
¡¤ SUN AU format (.au)
¡¤ m4a(mp4 audio)
P.S. WMV is read supported by directx. It works , I have converted wmv files directly to IPOD mpeg4 format.

Similar Messages

Automatically generate thumbnail image icons for all pix and vids...

hello,
i've searched around on the forums a bit about making the icons of my pics and vids actual thumbnail images made from the picture or the first frame of the video.
a lot of responses are mistaking this question for "how do i put the window into icon view?" this infact is not the answer that i suspect a lot of windows converts are looking for.
windows automatically makes such icons for all pix and vids if you put the window into icon view.
i notice in at cmd-j or in the window preferences there is a checkbox for "show image preview" or something like that, but despite this being checked, my pix and vids do not show an image preview. i'm gathering that this information does not exist in the resource fork which mac uses to organize photos.
is there any script or addition i can make to my system to automatically generate icons for pics and vids of all types? how to i suggest to mac that they add this functionality into the next release?
thanks for your time,
max

The Finder will create icons "on the fly" for nearly all graphic type files (jpegs, tiff, psd, and so on) and display them in both icon view and column view, provided the appropriate view preference has been set. Movies will just have the generic movie icon in icon view, and have a "live" preview in column view, ie you can play them in preview mode. If you want to add a permanent thumbnail which will display in all views, and whether or not the preference has been set for a particular folder in Finder, you'll need to add a thumbnail to the file. There are lots of ways to do this for static pictures, even rather clumsy ways to do it for movies, but the easiest thing is to get CocoThumbX:
http://www.stalkingwolf.net/software/cocothumbx/
Drag and drop both static pictures and movie files onto the application and a permanent thumbnail is created. Indeed, it will create cool thumbs even for things like PDF and HTML files (code or rendered display). For movies to get a thumb, they must be in a format that QuickTime can read. It has a set of preferences for just how you want the thumb determined (eg random or at a certain time), and you can drop batches of movies or even folders to have it assign thumbs to multiple movies at the same time. It is a way cool piece of shareware.
Francine
Francine
Schwieder

Conversion puts all data in one column

conversion puts all data in one column on excel

ok i created my own function
CREATE OR REPLACE TYPE t_varchar2_tab AS TABLE OF VARCHAR2(4000);
CREATE OR REPLACE FUNCTION tab_to_string (p_varchar2_tab IN t_varchar2_tab,
p_delimiter IN VARCHAR2 DEFAULT ',') RETURN VARCHAR2 IS
l_string VARCHAR2(32767);
BEGIN
FOR i IN p_varchar2_tab.FIRST .. p_varchar2_tab.LAST LOOP
IF i != p_varchar2_tab.FIRST THEN
l_string := l_string || p_delimiter;
END IF;
l_string := l_string || p_varchar2_tab(i);
END LOOP;
RETURN l_string;
END tab_to_string;

IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
Marco

Hello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can some one translate these instructions D-Link DI-524: installation as wireless HUB/Bridge General ON ALL TYPES OF ROUTERS DHCP SERVER HAS TO BE DISABLED ON ALL TYPES OF ROUTERS UPnP ALSO HAS TO BE DISABLED OTHERWISE YOU CAN SEVERELY HINDER OTHER USE

D-Link DI-524: installation as wireless HUB/Bridge
General
ON ALL TYPES OF ROUTERS DHCP SERVER HAS TO BE DISABLED
ON ALL TYPES OF ROUTERS UPnP ALSO HAS TO BE DISABLED
OTHERWISE YOU CAN SEVERELY HINDER OTHER USERS IN YOUR NEIGHBOURHOOD!
Practical example: D-Link DI-524
The DI-524 is a wireless router.Although the manufacturer doesn't mention this, you can also install this device as a wireless hub.Of course this is not supported by the manufacturer. Therefor you have nowhere to go in case of any problems Plug in the power cord of the DI-524. Do not yet connect the network cable!Search for existing wireless networks with your computer. Connect with the router.This can for example be done like this:
Click the start-button (at the bottom in the left corner of your screen).
Go to control panel
Go to internet connections (you may have to choose classic representation first)
You can now see your wireless network card, among other things. Right-click and 'View available Wireless networks'.
Connect to the router. In most cases the router will be called 'default'.Check your IP-address: you get an IP address from the DI-524
Go to the start-button
Go to 'Run'
Type 'cmd' and press enter
type 'ipconfig' and press enter
your IP address starts with 192.
Surf to your router with your regular browser. For this you need the address and a password, which you can find in the documentation.
In this case the address is 192.168.0.1
Now you must secure the router. For this it is best to use WPA-PSK
Your key is a randomly chosen sentence. Don't make this sentence too short.
Warning: Case sensitive!
You cannot reach the router anymore now.
Go back to your network card via "make connection". Search for your wireless network again and make a new connection
You are asked for a key. Supply this key the way you configured it in your router.
Surf back to the router.
Disable the DHCP server.
!! YOU HAVE TO DISABLE UPnP ON ALL TYPES OF ROUTERS
OTHERWISE YOU CAN SEVERELY HINDER OTHER USERS IN YOUR NEIGHBOURHOOD!
for this, go to Tools, Misc and switch off UPnP
Save these settings.
If you do not have a D-link router, look up in the manual or somewhere else where you can disable UPnP
Now you cannot reach the router anymore again.
It is only from this moment that you can connect the router to the modem.
Important: Use one of the 4 LAN ports. Never use the WAN port!
Go to your network card via the control panel. Right-click and "Repair"
Now you should get an IP-address in the range of 10.nnn.nnn.nnn
If you still don't have 192... you've made an error. The DI-524 still functions as a router and this is not allowed!

There are no Mac based instructions. The router is accessed and adjusted the same way whether you are using a Mac OS X, Windows or Linux. As noted in the other post it is done through your web browser which works the same from any computer. Even a Chrome Book.
akertrav wrote:
Thank you for that what I have been trying to do is extend the range of my wifi witha second dilink router. I was hoping for some mac based directions to achive this rather than the PC based as presented. Thank you for your ireply Paul

Getting all types of files with the help of get_file_name function

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
i have used get_file_name function to the file name of all type of files
but i am able to get only the folders when i tried like below
:FILE_NAME := GET_FILE_NAME(NULL,NULL,NULL,'Choose a Directory',OPEN_FILE,FALSE);my requirement to get all types of files on the window(user will selects whichever way he wants)
Can i acheive it through get_file_name or i have to go for any alternative to get the file list, so that user can select by browsing the folders.
Please help.
Thanks..

hi,
in my code the select file was set to false(so showing only the directories) now i have set it to 'true'. its showing the files now.
with the help of my above shown code i can get the full path of the file.
is there any way to get only the file name?(other than the last occurance of '/' logic or that is only the way?)
Please help.
Thanks..

All type in my menu bar and under icons has disappeared how do I get it back?

I lost all type in my menu bar and in drop down menus as well as under icons and next to icons in the hard drive menu. The dashboard also doesn't pop up when the curser goes over it. How do I get the type back?

Do any fonts work or show up at all in any application?
Have you installed any new Fonts or Adobe/MS Apps?
See if you can run Font Book in Applications, verify Fonts & check for duplicates.

How to turn OFF Organize by Conversation in all mailboxes at once and set it as default?

The Apple Mail Organize by Conversation is not working properly on Mail 6.5 on Mac with OS X 10.8.4 (Mountain Lion).
How to turn off such Organize by Conversation in all mailboxes of at once and leave it off as default for past and new messages?

It works doing it with one mailbox at a time, selecting it and then deselecting "View - Organize by Conversation". A real pain and clealry impractical when you have thousands of mailboxes...
It does not work at all deselecting even all items in "Mail - Preferences - Viewing - View Conversations". After that, all the imported mailboxes have the Organize Conversation active.
Anyone knows how to overcome this? Thanks.

Acrobat 9 HTML to PDF conversion sets all checkboxes to checked - Duplicate question

I am converting html files to pdf using Acrobat 9 pro. All of the check boxes and radio buttons come out checked.
This is exactly the same as the following thread:
Acrobat 9 HTML to PDF conversion sets all checkboxes to checked?
That thread is old, but not answered. Has there been any update to this?

Hi Don,
Have you tried updating to v 9.5.5 and checked.
Which OS and browser are you using?
Have you checked the behavior with a new sample form on the browser?
Regards,
Rave

Showing bangla character in all types of java mobile using bitmap fonts

i am a new user of j2me.but i cannot find any helps.
i want to do english to bangla dictionary for all types of java mobile using bitmap
fonts.
initially how can i display bangla character using bitmap font in non unicode supported java mobile???
but i cant do it.
please send me source code or any helping resource.
i am waiting for your reply.

More info; installed mplayer2 which should work better with vdpau and this happened;
VO: [vdpau] 800x468 => 800x468 Planar YV12
[vdpau] Got display refresh rate 60.015 Hz.
[vdpau] If that value looks wrong give the -vo vdpau:fps=X suboption manually.
A: 6.3 V: 6.4 A-V: -0.000 ct: 0.000 0/ 0 1% 2% 0.2% 0 0
[h264 @ 0xb6b41640]left block unavailable for requested intra mode at 0 23
[h264 @ 0xb6b41640]error while decoding MB 0 23, bytestream (1111)
[h264 @ 0xb6b41640]concealing 399 DC, 399 AC, 399 MV errors
A: 6.5 V: 6.6 A-V: 0.000 ct: -0.000 0/ 0 1% 2% 0.2% 0 0
Seek failed
Seek failed
Seek failed
Seek failed
Seek failed
Seek failed
Alot of those "Seek failed"!

Implicit Conversion from data type sql_variant to datetime is not allowed.

Getting a odd error. This code was working perfectly before a SQLServer upgrade.
The linked database is working, I'm able to pull up data from it in separate queries just fine.
I'm getting the following error.
Implicit conversion from data type sql_variant to datetime is not allowed. Use the CONVERT function to run this query.
Invalid column name 'TotalDay'. (.Net SqlClient Data Provider)
can anyone spot the issue? I've tried sever variations of the same code, but still get the same thing.
If I put this section in a query by it self it works just fine.
( DATEDIFF(ss,
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X3
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X3.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate ASC
),101),
CONVERT(VARCHAR(10),( SELECT TOP ( 1 )
TimeDate
FROM [nav].AcsLog.dbo.EvnLog AS X4
WHERE UDF2 = E.No_
AND CONVERT(VARCHAR(10), X4.TimeDate, 101) = CONVERT(VARCHAR(10), @sdate, 101)
ORDER BY TimeDate DESC
),101)) ) AS TotalDayBadge ,

>ANDCONVERT(VARCHAR(10),X3.TimeDate,101)=CONVERT(VARCHAR(10),@sdate,101)
It is not a good idea to use string dates for predicates in WHERE clauses.
Use DATETIME or DATE in predicates.
If you are not interested in the time part of DATETIME, use DATE datatype.
Example:
SELECT CONVERT(DATE, getdate());
-- 2014-08-25
Datetime conversions:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Between dates:
http://www.sqlusa.com/bestpractices2008/between-dates/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

I have a dv7-4153d. Audio has sporadic skipping about every 3-8 seconds on all types of playbacks. .

HP dv7-4153cl. Audio skips contiuously on all types of play backs. CD's, wmv.,pps."utube" ect. Does it about every 3 to 8 seconds, just like a skipping record. Have reinstalled audio driver. Run short and long primary hard disk self test and memory test. Did a sfc /scannow, and Checked the lengthy drive for errors. ALL PASSED.

Hi,
One thing to check is the following.
If you have HP 3D DriveGuard installed, open windows Control Panel, open HP 3D DriveGuard, click the Disable button, click Apply to save the change, then click OK. Restart the notebook and see if this has had any effect on the sound issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Hi,
What is the exact name of the desktop app you have? Is it "Acrobat Reader DC", "Acrobat Pro DC" or "Acrobat Standard DC"?
(Previously, your question was posted to the wrong forum - the Reader/Acrobat DC mobile forum.)
If you have the paid product ("Acrobat Pro DC" or "Acrobat Standard DC"), you can contact Adobe Customer Care.
Contact Customer Care
If you have the free product ("Acrobat Reader DC"), Adobe Customer Care will redirect you to the user forum like this one. You just need to wait for someone (who is an experienced user but not necessarily an Adobe employee) to answer your question in the right user forum.
You may also try looking for answers for the same or similar problems by Google search.

How to detect id3 tag from all type of songs

Hi Friends,
I am new to mac development and i have to develop one music processing related project.
First i have to detect id3 tag of all type of songs like mp3, aac, wav.
So is there any framework or class library is available for detecting id3 tag?.
Best Regards.

hey,
Nobody knows about it?

Component for search all type of transactions

Does Web UI has component for search all type of transactions?
For example, for search activities, quotations, lead, opportunities simultaneously.
Denis.

Hi Stephen,
I think component suggested by Nisha "'BT_1O_SEARCH" in the above reply is built on one order query object and it allows searching on all the one order entities..
In case it's needed to reuse 'BT_1O_SEARCH' in the other components.. this component is integrated in docflow component as a component usage that will give the idea on binding etc..
Hope this helps..
Cheers,
Sumit Mittal

Successful conversions of all type of vids to ipod format!

Similar Messages

Maybe you are looking for