Successful HotSync - how do I now see my data?

I have successfully completed my first HontSync having had to replace my hard drive as previous one crashed. When I open my Palm Desktop I can't see my data and don't know how to get to it - it mys be there somewhere as my first HotSync was executed successfully. Can anyone please help me with this?
Thank you.
Post relates to: Palm m505
This question was solved.
View Solution.

If you click on Start, then Programs then Palm or Palmone (whichever you have) You should see PIM conduit sync, under that you should see two choice, Sync with Outlook and sync with Palm Desktop
Post relates to: None

Similar Messages

I just bought a new macbook, and am trying to transfer my settings, etc, from my old imac. I have connected the two with a firewire. How do I now transfer the data?

I just bought a new macbook, and am trying to transfer data from my old imac. I have connected the two with a firewire, and how do I now transfer the data?
Thanks in advance.
Joel

You can connect them in Target Mode http://support.apple.com/kb/HT1661 and then drag and drop from the iMac to the MacBook.

Does anyone know how to get Now Up to Date?

It's still the best calendar program I've used for Mac... Any other ones out there?

I guess I kind of figured out how to do this. I had to totally inactivate end-to-end monitoring in the runtime workbench configuration and then re-activate it.
The only problem was that the messages that were in the gap (in your case 8 hours) never got put into end-to-end monitoring.
So I did get it caught back up, but not in the way that I wanted. That is why I left the question open, to see if anyone else had a better way to do this.
Jeff

HT4859 Where can I see what data is in my iCloud backup?

I haven't gotten an error recently, but the iCloud settings don't say when the last successful backup was. I also don't know how to check to see my data on a PC browser or verify that it backed up everything I want it to. Thanks!

You can see when your last successful backup was by going to Settings>iCloud>Storage & Backup and reading under Bac Up Now at the bottom.
You can see what is in your backup. You can only see what you have selected to be backed up by going to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your phone on the Backups list at the top, then looking under Backup Options. Note: your backup will contain other data as well (such as your text messages); these don't show under Backup Options because you don't have the option to exclude them from that backup.

My fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my messages on his phone, how can i fix this?

my fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my text messages that I type on his phone, how can i fix this? I don't see any of his, just the other way around. The icloud account is in my name.
also, would this affect being able to facetime each other?
Thanks!!

we do what your doing... we use the same ID for "Icloud".
We do NOT use the same ID for: Face time and Imessage

How do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes? Once is enough and no checkbox exists to say "do not show this message.....".

When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."

Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

HT4743 I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3). How can a show I purchased be incompatible with the latest version of iTunes?

I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3).
How can a show I purchased be incompatible with the latest version of iTunes?
I want a refund, but I can't even figure out how to request one through support. Super frustrated and long time Apple customer.

After a day of trying, both iTunes and my Apple TV are telling me that the episodes of Scooby Doo I purchased are incompatible due to QuickTime. I still don't understand how I purchased something from iTunes that doesn't work with iTunes.
the exact error I receive when I try to play an episode is the following:
"This movie requires QuickTime, which is not supported by this version of iTunes."
Any advice would be great!

Hello, Recently, I asked about the possibility of swap the Adobe Design Standard CS5.5 from windows to mac. In response, I was directed to the help page and and i know that it is possible. Today I see that the help page is out of date. How cann I now swa

Hello
Recently, I asked about the possibility to swap from windows to mac with Adobe Design Standard CS5.5. In response, I was directed to the help page and i know that it is possible. But today I see that the help page is out of date.
How cann I now swap platforms for Adobe Design Standard CS5.5? Do I realy need to buy CS6? Or afer dowloading the mac version of CS5.5 I get the key. And if I realy need upgreade the CS5.5 cann I use the Mac version of CS6 for the dowloaded mac version of CS5.5? Is it possible?

Thanks !
I didn't know that I cann buy CS6 Mac upgrade in Adobe Store.
So I have only to buy the CS6 Mac versions and upgrade CS5.5 Win to CS6 Mac?
How does look the procedure?
Do I need to install first the CS5.5 Mac on my Macbook and then upgrade it or is it not necessary?
Thanks
Langosz

I recently upgraded from Firefox 3.6.5 to Firefox 4.0.1 and status updates after pressing "Sync Now" which tell you that data sync is in progress or has finished, have STOPPED appearing. How do I know whether my data has been synced or not?

More specifically even when I click Tools->Sync Now nothing happens. Also when I do a "Reset Sync" via Tools->Options->Firefox Sync, nothing happens. Meaning no progress bar appears indicating that data is being synced or has been synced, as it used to happen in earlier versions of Firefox. Is there a way to know after pressing Sync Now that my data has been synced?

There is no visual representation to show that it has worked or is in progress, but if it fails you get a bar appearing at the bottom of the screen telling you that the sync failed.
If you add the Firefox Sync toolbar button to the toolbar, hovering the mouse over the button will give a tooltip showing the last date/time of the last successful sync. For details of how to add the button see https://support.mozilla.com/kb/how-do-i-customize-toolbars

I have created my new Air as a new instead of registering as my existing ipad 2 - how do I now install my backed up ipad 2?

I have created my new Air as a new instead of registering as my existing ipad 2 - how do I now install my backed up ipad 2?

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

How can I implement @see's behavior in a taglet?

Admittedly I didn't search the whole forum, so please forgive me if this has been asked and answered before.
However, I am attempting to implement a silly little taglet that will allow me to have a class 'link' to its junit test case. The reason it's silly is three-fold: 1) i know i can accomplish the same thing with @see but choose not to, 2) i know i can accomplish the same thing with {@link} but choose not to, and 3) i want the link to follow the color scheme used in the junit javadoc (i.e. color red, visited color green).
I have it working...sort of. I'd really link to take advantage of how @see attempts to find the referenced class but I don't know how. Right now I take the Tag text, blindly take the class name (assumes text is correctly referencing a class), output the necessary style information and then output the link.
Example:
@testcase packagename.MyTest
[class exists] -
JUnit TestCase:
MyTest <- in the style of a hyperlink
[class does not exist] -
JUnit TestCase:
packagename.MyTest <- plain text
I would appreciate any assistance: a reference to some documentation that outlines how @see works, a reference to some source code of @see, possible algorithms for me to implement.
Thanks, in advance
Mel Riffe

Hi Mel,
If you are using the latest version of Javadoc, I recommend that you extend com.sun.tools.doclets.standard.tags.SeeTaglet . Override method toString() and modify the link to follow the desired color scheme.
Then, pass your new taglet to Javadoc using the -taglet and -tagletpath options.
Good Luck!
-Jamie Ho
Javadoc Team

How I can see the data of my message after processing?

Hi guys,
My scenario is XI -> R/3 (asynchronous) using ABAP Proxy.
When a try to send a message the flag code is ok and the message enters in R/3 inbound queue, so it means that everything ok!
I want to know how I can see my data in queue or better how it enters in proxy and how I can see? In proxy method I put a break point... but can't stop there!!!
What I need to do to make a little test and verify that really works?
Anybody could help?
Thanks in advance,
Ricardo.

Hi Ricardo
If you want to do Debug Asyn Inbound proxy. Do the following steps.
1. Get the Queue-Id from MONI.
2. Deregister the Queue for your message (SMQR).
3. Now resend the message. The message will be stopped in the Deregistered Queue.
4. Start Transaction SMQ2 and select your specific Queue. Double clicking will take you to the detailed level.
5. Press F8 to start the Debugger. And now you can debug the whole Proxy mehtod for Inboud proxy method.
Check the file 'How to Debug XI Applications' for more information.
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
Regards
Paresh

I used to have iPod shuffle connect to PC, I now want to use it on my Mac - how can I now assign iPod to Mac

I used to have iPod shuffle connected to a PC, I now want to use it on my Mac - I cannot get iTunes to see the shuffle at all - trid the 5 sec fix - no go. How can I now assign iPod to Mac?

You can do a platform swap
Order product | Platform, language swap

HT1391 I had all of my music on an external hard drive that failed. I have iTunes Match so all of my music was synced with the "cloud". How do I now download and save all of my music back down on a new external hard drive?

I had all of my music on an external hard drive that crashed. I have iTunes Match so all of my music was synced in the cloud. How do I now re-load my music back down onto a new external hard drive?

Hey Rbe58!
I believe this question can be answered by the information in the following article:
iTunes 11 for Windows: Access all your music anytime, anywhere with iTunes Match
http://support.apple.com/kb/ph12492
Play or download songs from iCloud
You can play songs directly from iCloud, or you can download songs so you can play them when you’re not connected to the Internet.
If a song is available in iCloud, it has a Download button next to it.
To play the song, double-click it.
To download the song, click the Download button.
After you download a song to a computer, it remains in the computer’s iTunes library, even if you turn off iTunes Match.
To only display downloaded songs in your iTunes library, choose View > Hide Music in the Cloud. This also hides any previous iTunes Store purchases you haven’t downloaded.
For information about downloading and playing songs on an iOS device, see the documentation for the device.
Thanks for using the Apple Support Communities!
Cheers,
Braden

Successful HotSync - how do I now see my data?

Similar Messages

Maybe you are looking for