Successful Windows 8 Boot Camp setup, keyboard not responding...

I successfuly managed to boot camp windows 8 pro (via the windows 7 upgrade route).. I rebooted the system at least a few times without experiencing any issues with the Keyboard.. yet now I can't do anything... I had windows setup eactly how I needed it after a few hours.. I have seen responses to try boot camping again in the hope by luck it will fix itself... But the problem I have is in order to activate Windows I had to spend over an hour on the phone with MS which I really don't want to have to go through again... It took about 3 - 4 hours to get it to where I had it and it would be an absolute pain in the a ss to have to go through it again.....

_LMD wrote:
Good day, I have installed Windows 8 successfully on my Macbook, [OS X Mountain Lion] using Boot Camp assistant. When I got to the step to install the Boot Camp Support software with the CD I created during installation through bootcamp, a pop up message appeared: "This version of Boot Camp is not intended for this computer model." I am stuck in Windows at the moment, there is no way to restart in Mac OS X now, I have tried the hold down the option key while restarting too, it doesn't work.
1. how can I get to restart in Mac again?
Reboot, hold the X key when you hear the chime, hold it until the computer starts to boot in OSX
2. where can I download the correct Boot Camp support software for this computer for Windows 8? [macbook pro with retina display; OS X Mountain Lion]
Windows 8 is not yet supported, there are no drivers, wait for them or use Windows 7.

Similar Messages

Windows 7 Boot Camp no longer recognize my wireless mouse and Keyboard?

I have a mid 2011 27in iMac on 10.9.1 and I run Windows 7 via boot camp, sometimes Parallels as well. Today I tried to boot up in to Windows via Boot Camp, but I can not control the cursor or input anything via kayboard. This has happened before and I only got it working again after reinstalling Windows, which I am REALLY trying to avoid
The thing is, when I boot in to Windows, it is definitely responding to the keyboard when I hold F8 to go in to safe mode, but once the desktop loads up, I lose any function of mouse or keyboard. Even when I try to manually add a device using a USB mouse, it is not detecting any wireless device.
Both my Magic Trackpad and Wireless Keyboard work fine in OS X, Windows 7 when in Parallels and works during the start up of boot camp, but not when Windows 7's desktop boots up.
Any help would be greatly appreciated!

Welcome to the Apple Support Communities
You have to download the drivers. To download them, press X key while your Mac is starting to start into Mac OS X, open Boot Camp Assistant and follow the steps to download them. You will have to burn them onto a DVD or USB drive, so you will be able to install the drivers on Windows. Then, it should work fine.
If you can't download them in Boot Camp Assistant, download the drivers from this website > http://www.cafe-encounter.net/p682/download-bootcamp-drivers The links are from Apple and that's safe to download and install

Windows 8.1 Boot Camp Setup App Error

Hello All
FINALLY managed to get Win8.1 installed on boot camp, but came across a familiar issue (when I tried with Win7): driver setup isn't working in Win8.1
Win8.1 boots up fine, but i have 5 device drivers that didn't install properly:
Bluetooth USB Host Controller
Ethernet Controller
FaceTime HD Camera
Network Controller
PCI Simple Comm Controller
I've downloaded the file from Boot Camp Support Software 5.1.5640 (I'm using an early 2013 Macbook Pro Retina, 15"), and tried Boot Camp Support Software 5.1.5621 as well, with no luck
When i click on the boot camp setup file E:/BootCamp/setup.exe (provided by either download in the links above), i get the error "This app can't run on your PC, to find a version for your PC, check with the software publisher"
Has anyone else had this problem?

Yes I have the same problem. I am using a Kingston USB 3.0 Windows-to-Go (TM) Certified 64GB storage device. I used Windows 8.1 Enterprise x64 bit edition to format the device. I used Microsoft's own directions to format the Windows-to-Go device to be compatible with Macbook Pro specifically to use the Macbook with the Kinect v2 API. http://blogs.msdn.com/b/kinectforwindows/archive/2014/07/28/developing-with-kine ct-v2-on-a-mac.aspx
I can boot my Macbook Pro Retina 15" Late 2013 using the USB 3.0 windows-to-go drive (using alt / option upon boot to select the USB device). Windows boots and after BitLocker will allow me to log in to the computer's desktop. I can navigate, clumsily (no right click support) to device manager and see there are no drivers installed for things like network card, bluetooth, important things, etc.
I download the 5.1.5640 Bootcamp drivers from this URL (Boot Camp Support Software 5.1.5640) and then unzip them to the root directory of a USB 2.0 drive.
I boot the Macbook using the USB 3.0 drive then mount the USB 2.0 drive with the downloaded Boot Camp drivers version 5.1.5640. I navigate to \BootCamp\Drivers\Apple\ and double-click on BootCamp.msi. I then receive a Windows 8.1 error dialog that reads "This app can't run on your PC. To find a version for your PC, check with the software publisher". This is not a helpful error message.
What am I doing wrong? Is there a way to "trick" Windows into ignoring the "app can't run on my PC" check to unpack the files and allow me to at least try installing the drivers one-by-one?

Number keys on Mac keyboard with Windows in boot camp

I am using the full size wired keyboard with my iMac. While I am in WIndows XP Pro on Boot Camp, I can not use the number keys on the right side. Is there any way I can make these work? It might be picky, but is sure annoying the crap out of me. Any thoughts?

The Boot Camp forums are here:
http://discussions.apple.com/category.jspa?categoryID=237

Can't install windows it says the boot camp partition is not formatted as a NTFS file structure

Using boot camp assistant it gets to the point of installing windows 7 and it won't because the boot camp partition is not a NTFS file structure. It also seems strange to me that there are 5 partitions would have expect ether 2 or 3. Please help this is very frustrating.
Thanks in advance

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

I have a mac pro wich will not open windows in boot camp i get to the two options select windows but iyt will not load can you help please

i have a mack pro which will not open in windows from boot camp get to the two options and select windows drive but it will not open can you help Please

Hi there, Well, i thing i might have had the same problem (if you dont mean the selecting part, then try keyboad with usb and without if u dont have a macbook pro or so), i did the same and after selecting windows it said "No bootable disk" or " no boot disk" or something like that and the installer wont start when i was trying to install via CD/DVD.
The sulution is to use 2 usb-drives, one for the support drivers from apple and one for the windows it self after burning the CD/DVD to the usb on a PC using the windows own tools and creating a ISO file.
(there might be problems whit CD/DVD install sometimes)
The ISO file on a own USB is the most importat thing!! (and even apple and windows didnt know that but me and a technikal support guy from the store i bought it managed to fix it after like 4 days )
Hope it work now mate!

How do I remove the Windows partition? Boot Camp Assistant does not allow me to select the remove option.

I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?

You can try removing it in Disk Utility.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed.
You should now have a restored single volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

Boot camp files do not show in Mac following Windows restore

I am trying to increase the size of my boot camp partition (using Winclone to create an image).
This is my stupid messing around which created the problem:
I had previously tried changing the partition sizes, repartitioning my HD: making windows bigger (uninstall via boot camp, reformat drives, reinstall mac from time machine and windows from boot camp). This worked fine, but I stupidly tried restoring my files mannually in windows using my file backups, but this messed up the location of some of my files (e.g. creating another C folder within the boot camp (C) partition). So I started again: I had made a system image of windows using the windows backup of the partition, before I physically changed the files.
This is what I did to fix it:
I reformated my drives back to the previous size (making windows smaller, uninstall, reinstall via boot camp assistant; and mac larger) restored windows using system restore in windows. I was able to restore to the previous windows system image, and I can boot up windows using the option key at start up.
This is what I'm left with:
However now the boot camp hd icon is called 'untitled' (not boot camp), and contains no folders (disk utility says it is practically empty). I can't repartition my drives if I am unable to clone the boot camp files (e.g. using WinClone) from the mac partition.
I know the windows restore worked, because I can boot in windows, it seems my mac partition is no longer reading the boot camp side? How do I fix this? How can I find the boot camp windows partition files within my mac?
Thanks.
I have a mid 2011 iMac with Lion OS X 10.7.2, and Windows 7 Home Premium 64 bit.

Is there a way to do this that doesn't cost money?
What is the problem with my boot camp? Is it the mac side not reading the boot camp files?

HT1899 Installed windows 8 through boot camp ,track pad not working

I installed windows 8 though boot camp , track pad not working

The update to boot camp is now available!
Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
After going through the usual process from boot camp, then installed windows and the support drivers... the trackpad rt click did not work. I had to then go download the boot camp again from windows 8 using the url below and ran the set up.exe from the boot camp folder you can download from below. Run it within windows 8.
http://support.apple.com/kb/dl1638
Boot Camp Support Software 5.0.5033
This solved the Trackpad Right Clicking issue (not working) as well as tapping.
The wireless and network connectivity issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Red Alert 2 on Windows 7 Boot Camp

New MBA 13" 2011.... Installed Windows 7 (Boot Camp) with latest Windows Support tools/drivers from Apple. Install Red Alert 2 the game but get a graphic glitch where the videos and user menu isn't displayed.
Anyone help?

I ran the automatic setup, I did notice that there was an ATI folder there, however I thought the graphics were Intel graphics not ATI on the new MBAs.

Wifi under windows 7 boot camp keeps dying

I have been running windows 7 64 bit under Boot Camp for just under a week, and last night have started to have some pretty serious issues with the built in wifi.
Periodically, without any consistent cause, when I am booted into Windows 7, my internet connection begins to degrade. Not disconnect or anything, just taking on like 60% packet loss or more, pings to both my default gateway (the wifi router) as well as to anything further out on the internet. My ipad, iphone, macbook pro are all fine and able to use the internet at the same time without issue, its only the imac booted into Windows 7. I can reboot with no change, still completely unusable (unable to load even a single web page) for Windows 7. reboot to OSX, no issues. Its not the router, or the ISP, its JUST when I'm in win7 using wifi. I've changed IPs, used a static DNS, measured wifi, etc. I was using this setup for almost a week before the issues started, and I'm assuming its something wrong with Windows7. Fully patched and up to date, both OSX and Win7.
I finally figured out that I can temporarily fix the problem by resetting the driver for the wifi interface under the Network Adaptor troubleshoot wizard in Windows, this buys me between 5 minutes to half an hour before the issue starts up again. Nothing else I've found will fix the issue even temporarily.
I finally ran a 50 ft ethernet cable from the imac to the router and this has for now solved the intermittent issue, but its not sustainable this way as I cannot leave the cords like this. But clearly there seems to be an issue with the wifi driver in windows that boot camp is using.
Can anyone provide some suggestions of what to look for within windows or a way to debug this more directly? I used the BootCamp assistant to burn a DVD of drivers at install time and I believe they were the most recent versions, but not sure how to check further. Device manager reports I am using the Atheros AR938x Wireless adaptor, and this is a mid-2011 27" iMac running Lion.

I'm having the same problem. Wifi loses connection after 5-ish minutes.
Wondering if it's an issue with the 802.11n drivers...? Seems a little more stable on the "g" networks.
This has been happening since the latest OS X update. I have a mid-2010 Macbook Pro 15".

New Retina MBP + Windows 7 boot camp = no nVidia GPU

I'm hoping someone will correct me wrong on this...
I have a brand new 15" Retina MBP 2.6GHz 16GB RAM 500 SSD.
After finally getting Windows 7 SP1 installed (along with countless updates ) and boot camp 4.0, I have noticed some display problems. My only reslution options are: 1600x1200 (which looks stretched), 1280x1024 (reallly stretched), and lesser resolutions with which I didn't bother. This didn't seem to make sense given the nVidia 650M.
Also, NONE of the external video ports are working (Thunderbolt to DisplayPort, HDMI to HDMI, HDMI to DVI) -- they're simply not getting a signal at all.
So I went into device manager, and the 650M is not even showing up as being installed! All I see is "Standard VGA Graphics Adapter", which tells me Windows is only acknowledging the integrated Intel graphics.
I can't simply install an nVidia driver, as it can't see the device onto which that driver would be applicable.
I assumed this was an issue of the "automatic graphics switching." Apple confirmed this, telling me that Windows doesn't have an option to choose between displays. I couldn't find a way to trigger it with any third party app, either (including Adobe After Effects).
Further, Apple claims 64-bit drivers aren't yet available for this GPU, so even if I could switch it over, I'd have to step down to a 32-bit install.
So, basically, my boot camp side looks like a netbook.
I cannot be the only one experiencing this!
Thanks in advance,
Andrew

Paul22 wrote:
You can't install the windows support software before you partition. 1. Start boot camp in OS X and create the windows support CD; 2. Install windows using boot camp; 3. Install windows support software from the CD that you made.
I followed the boot camp manual exactly and the Nvidia drivers were not installed. I had to go into the Nvidia drivers directory in the windows support CD and manually run the setup.exe file. After that, the drivers were installed.
Note: when you create your windows partition in boot camp, you will select custom, and then format. It is critical that you format your boot camp partition and not your OS X partition. It will not say boot camp, but you can tell it's the right one by its size. For example, if you selected a 40 GB size for boot camp, the size of the drive you select to format should be 40 GB.
Paul
That is exactly what I said, are you sure you wanted to reply to me?
FYI, In a normal Bootcamp installation the partition will be named Bootcamp

Problems with starting Windows after Boot Camp was installed on a Win-PC

Hi,
i have a very interesting problem for the MacComunity (haha -.-). The problem is: after I have installed Boot Camp from my Snow Leopard DVD on my Windows PC (not my iMac); I can not start the system. In the Boot Camp System where i can set the system to start with, there was only the Boot Camp System available (not Vista). However, the system installs some Vista-Updates and some Updates from Apple Software Update (iTunes 9.2, Quicktime 7, Safari 5, Airport 5, Boot Camp 3.1) on my PC.
Everything was all right but after I have restarted the System nothing happend. the System freezed when the boot-Screen (Intel Logo) appears. The Systemkeyboard was not detected. It only detects a n external apple Keyboard. There are some reactions when I press the keys, but the Monitory is frozen, anyway. What can I do?

Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.

Successful Windows 8 Boot Camp setup, keyboard not responding...

Similar Messages

Maybe you are looking for