Successfully changing frame size of footage shot portrait on iphone4

ive been fighting the iphone embedded orientation lock for shot footage.
i have a clip i hit record at the beginnin gthe the phone didn't realize i was recording it widescreen (landscape).
i tried rotating in final cut, but since the frame size is 720x1080 and not 1080x720 after the footage has been rotated the original size of the frame is naturally cropped it.
i transcoded the orig clip in compressor to the correct frame size, but it's now squeezed.
how can i get this clip to be 1080x720 non anamorphic?

You can't add what's not there...
You will have to scale up the video to the width of your canvas... being that the original source is not really a decent camera (and you wouldn't want to do this with a decent camera either), your resulting video will look fuzzy and/or pixelated...
Or you can also change your sequence settings to SD (720 x 486)... but it all depends what is the end use of this video...

Similar Messages

  • How do I change frame sizes to user-defined frame sizes

    Hi,
    I hope someone can help me. I dont know how to change my project frame size to a user-defined frame size.
    ( like from 1920x1080p to 575x900p ) Ive found nowhere a answer to this question.

    You can try this workaround:
    http://library.creativecow.net/payton_t/FCPX_Custom-Resolution-Timelines/1

  • Changing Frame Size in MPEG2

    I'm using compressor to change less than stellar VHS video to MPEG2. I see that compressor has an option for frame size, but its ghosted out for MPEG2, can this be overridden in any manner? MPEG2 can be resized to LoRes MPEG2, with other programs, to 352x240 which is VHS quality and would make the video look generally better on a TV.

    MPEG-2 (or MPEG-1) output file frame size can't be altered in Compressor. Sorry.

  • Help! Trying to change frame size of project/sequence

    I have tried everything I can to change my project's frame size to 320 x 240 from 720 x 480--modifying sequence settings (nowhere to change size, just "timeline options" and "render control" tabs), clicking on the sequence's frame size in the browser (even with option and command), going into user preferences, system preferences, item properties, project properties without any dialog box that will help me make the change. I checked off "Prompt for seeings on New Project/Sequence" in User Preferences, but it only gives me a pop-up menu with the Easy Setup options. What's happening? This is taking me forever to figure this out. Any help would be greatly appreciated. Thanks.

    Hi Bob,
    Why do you want a project at 640 X 480 ? You will not be able to print it to your camcorder.
    Just put those values in quicktime conversion box, and your exported movie will has this frame size.
    May be the confusion become from the aspect ratio of pixel...
    DV pixel are displayed "as square pixels" in Final Cut Express, if you uncheck this option in viewer, you will get a horizontal squashed image.
    That's because TV set do not handle pixel like computer monitor and your camcorder record it with this aspect.
    So don't be concern with the 720 or 640 question: just export your movie using quicktime conversion set to 640X480 for viewing on computer (like I suggest earlier) or simply "print to tape" from FCE to your camcorder (with stretched pixel for TV monitoring).
    Michel B.

  • How to Change Frame Size in FCE 2

    Hi,
    I'm very new to this video stuff. Is there a way to change the frame size in FCE 2? When creating a new project there are different options for the type of video but there does not appear to be a way to change the frame size from 720 x 480. I would like to use a different frame size.
    Thanks!!
    john

    Tom Wolsky wrote:
    FCP can. What size is the material and where is it coming from?
    The material is 360 x 243, it is a .mov file from a SVHS transfer. Is 360 x 243 a standard size for an SVHS transfer? I expected the frame to be 640x480.

  • Changing frame size in avi

    I'm editing a number of clips (different sizes) and I to save all of them in the same size. When importing I could only convert all their sizes to the projects size (which I couldn't change). When exporting, the feature enabling saving in a different size was disabled.
    I used the scaling option, but then the movies are saved in the same size, only with a black background. Is there any way to actually set the movies to the size I want?
    The clips are AVIs (could it be a codec issue?)
    The operating system is windows XP
    I'm using Adobe Premiere CS3
    If it is not possible to save the movie with smaller dimensions - is there at least a way to determine the background color?
    Thanks,
    Aya

    Thanks! The GSpot looks like a good program to have
    The codec is MP42 (S-Mpeg 4 version 2)
    And the initial settings are the default ones - DV-PAL 48kHz
    What I would really like to do is to crop (and resize) the videos, then save them all in the same size (smaller than the default 720x576), without a black background. Is it possible?
    Thanks!

  • What settings are needed for Flip 4 Mac to change frame size?

    I just installed Flip 4 Mac Studio Pro so that I can make wmv files in different sizes. It works in 340x240 and 480x360, but freezes up when I choose the preset 384x288. Are there other settings that need to be changed to make this work. I thought this version of Flip would allow me to do most anything.
    I'm exporting a short 4 min sequence from FCP using Quicktime conversion.

    This will give you the instructions on how to set it up step by step.
    http://community.virginmedia.com/t5/Email/Setting-up-access-to-Virgin-Media-NTLW ORLD-email-on-iPhone-or/td-p/883445

  • Resize of picture changes frame size

    Hi,
    I put an 8 point stroke around my photos and if I resize by using command option shift while draging the corner the stroke changes too.
    This is a new behavior for me and I am not sure of the terms to use to look it up in help. How do I resize without changing the stroke weight?
    Thanks,
    Garrett

    Where specifically in the upper control panel?
    I'm assuming you mean the lower of the two upper control panels?
    So, in the upper control panel there is a button that says "?" click that exact particular button and the window that says Stroke Styles will open.
    Alternatively, please tell me what terms to use to look up "Stroke Styles" in help.
    Thanks,
    Garrett

  • JFrame content displayed only after changing frame size

    Hello everybody,
    could someone explain to me why the content in this frame:
    public class PHPTableReport extends JFrame {
         public PHPTableReport() {
              getContentPane().setLayout(null);
              final JLabel newAppletLabel = new JLabel();
              newFrameLabel.setBorder(new BevelBorder(BevelBorder.LOWERED));
              newFrameLabel.setBackground(Color.BLUE);
              newFrameLabel.setText("New Frame");
              newFrameLabel.setBounds(10, 10, 50, 58);
              getContentPane().add(newAppletLabel);
         }when invoked like this (in a JApplet):
    PHPTableReport pHPTFrame =  new PHPTableReport();
    pHPTFrame.setVisible (true);
    pHPTFrame.setBounds(300, 300, 800, 600);only displays after dragging the window/frame bigger or smaller?
    Thanks in advance again
    Jan

    Change this :
    pHPTFrame.setVisible (true);
    pHPTFrame.setBounds(300, 300, 800, 600);To:
    pHPTFrame.setBounds(300, 300, 800, 600);
    pHPTFrame.setVisible (true);

  • Changing Frame Size in MPEG_Streamclip for FC

    I have a 4 cameras shoot with 3 cameras filming in PAL at 1920x1080 interlaced, and a different 4th camera filming at 1440x1080 interlaced.  I'm trying to convert the 4th camera to match the others, and do a Multiclip editing.  So I used MPEG Streamclip for conversion and opened a Destination Folder.  But when I imported the 1920x1080 converted files from that folder into my project they were 1440x1080 !  Does anybody have a solution please?  Thank you in advance.

  • Final Cut Pro 7 Slow Render, Frame size changing

    I have a sequence open with the following properties:
    29.97 fps frame size: 720 X 480, Compressor: DV/DVCPRO - NTSC, Audio Rate: 32.0 KHZ
    The Clips I'm editing with have the following properties:
    29.97 fps, 854X480, DV/DVCPRO - NTSC, 32.0 KHZ
    Everything was going smoothly until this one clip I dragged in with the exact same properties changed it's frame size. There had been two perfect black bars on the top and bottom of all the shots up until this one clip that changed frame size and covered up those black bars. It's also taking forever to render any small edit I do with that troublesome clip. I was thinking it might have to do with the difference in frame sizes from the sequence properties and the clip properties. I tried to change that by clicking: 1. Sequence 2. Settings.... and changing the width and heigth but it wouldn't let me. Anyone got some tips?

    Where did you get that footage?  854x480 is a display size.  It sounds like your footage was ORIGINALLY anamorphic DV.  Which is actually 720x480.  You would need to tell FCP that the footage is anamorphic, either on ingest, or by checking the anamorphic column in the browser-- EXCEPT that somehow the clips are baked in to a non standard size-- like someone exported them at the anamorphic display size.  You would do this for example if you were making a file for projection or computer use, where the anamorphic flag would not necessarily be recognized.  But you normally would not do this if you were still working with the footage in an editing program.
    You might also note that the top clip above is set to less than 100% scale.
    What happens if you select all in your sequence and Edit>remove attributes>basic motion and distort?
    Quite a mess you've built for yourself, or someone handed you.

  • Warp Stabilising footage after changing the size of the video frame size

    Hi everyone. I was wondering if anyone could resolve a problem I'm having with Warp Stabiliser in Adobe Premiere Pro CC. So I'm editing a video for a client and unfortunately a few scenes feature some camera shake, which don't look that aesthetically pleasing so I'm trying my best to get rid of the shake using Warp Stabiliser. I altered the frame size of the video from 1920x1080 to 1920x800 so I can have the 12:5 anamorphic look, however when I try to use Warp Stabiliser now a message pops up saying that it requires clip dimensions to match sequence and that I can fix it by nesting. I'm confused by this, I was wondering if anyone could help me by letting me know how to get round this, cause I would hate to have to do the entire video agin just because I altered the frame size. Thanks a lot.

    For the warp to do its thing the clip needs to be the same as the sequence settings.
    If not you get a warning like you have experienced. The only way to solve this is to nest the clip and then apply the warp to that nest.
    On a side note i would edit everything in 1820x1080 and on export make it 1920x800.
    For reference in your edit you can make a pillerbox matte in the titler.

  • How do i undo my changes in sequence settings? (the frame size)

    I have ran into a very frustrating problem. I have FCP 7 and my footage i am editing is HDTV 1080i. With this footage i have to change the frame size to 1440 by 1080 and in another instance i change it to another frame size. The problem is that i made a mistake with one of the frame sizes and i dont know how to undo the mistake. If i enter in a new frame size, the video will only add on to my mistake frame size instead of replacing it. The only way i see fixing this is redoing everything...but there has to be an easier way...any help?! Or am i unclear?

    Select the clips that aren't filling the frame correctly, and then right click on one of them to select "remove attributes". From the dialog box that will open, select "basic motion" then click OK. This should take care of your problem if I'm reading this correctly.
    Jerry

  • Changing Photo Album Frame Size

    I am having my first attempt at designing our business web page with IWEB. In reference to the My Albums Index page, the frame styles all seem to only suit landscape style photos. All our photos are portrait layout, and so they appear within the album frame with the top and bottom missing. I cannot see how to change this, without changing the photo format, which I would rather not do. Please help.

    Welcome to the Apple Discussions. I don't know how to change the frame size in the album layout but you might consider using either SimpleViewer for Flash Album Exporter plugins for iPhoto which create flash based slideshows/galleries. This demo page has some examples of them. They appear to handle portrait oriented photos well. Instructions on how to embed them in an iWeb page is included.
    There is one portrait oriented photo in each example.
    OT

  • Changing the frame size of a Quicktime image sequence

    I need to create an image sequence of a short piece of video. I know how to make an image sequence using the Quicktime conversion, but I can't get it to export in widescreen 1920 x 1080. It keeps exporting the frame size of the images as 1440 x 1080. How to you change the frame size?

    the original clip has a frame size of 1440 x1080 hence that is how it exports ... you must set the pixel aspect ratio in your image processing app to 1440x1080 then the footage should appear normal.
    (in Photoshop that's the HDV Widescreen 1.333 pixel aspect ratio setting)
    edit: or you could export a tiff image sequence using compressor and do the resize in there

Maybe you are looking for