Succession Planning - German text displayed

Hi,
We are experiencing a problem where a German text appears in Career Type column for a position that is displayed on Nakisa screen. The text in the Postion Attribute though is in English.
This happens when slecting Positions ==> All Positions ==> then search for position using position title or position ID. Position ID, Title, Career Type, Career Level, etc columns are then displayed. The Career type text for a position where Career Type and Level values are captured are displayed in German. Can you advise how to fix this.
Succession Planning 2.0; Nakisa 2.1; SAP ECC 6.0, Service Pack 6.
egards,
Ike

Hi Ike,
Ah ha! Now I know the problem! I have correction instructions from SAP that I know are fixed in a later service package for SAP, but I haven't seen a SAP note released with the fix. This is from the OSS message:
there is an error in the Enterprise Search modelling which has been
corrected by support packages in the meantime.
In the technical template SUBTYP the field SUTXT in the node
T777U is not marked as text field. So the search does not know
that this field contains a language dependent text which has only
to be provided in the logon language.
The modeling in SAP-Standard has been corrected in the meantime
by support packages. You can correct the error in advance by
changing the technical template subtyp as indicated in the attached
picture: You only have to check the field "contains text".
For this you probably need to create your own software package and then include EA-HRGXX because some nodes in the standard software component cannot be changed.
Best regards,
Luke

Similar Messages

Manager Succession Planning: Display all reports

Hello,
We have configured the Succession Planning Manager application (TVN 2.1, java, Product Version: 6.0 Build Version: 6.00.003.00).
The application displays the positions reporting to the connected managers. We would like to give managers access to these positions + all positions underneath: N-1, N-2...N-x. We need therefore to be able to browse the org units beneath the manager's org unit. This would be similar to what is available for TMS in Succeession Planning application (they see everything underneath the org unit they are TMS for)
In the data connection (general settings) for My reports, we have:
Data Table BAPI_ReportingPosition_DataSet
Data Filter Type='S'
If I understand well, this is used to select the objects displayed in the view. Is there something else we can use in order to achieve our requirement?
Thanks,
Laurent

Thanks.
This menu was not active for English in IMG.
I see a config called "Specify Type of Reporting for Determining the Manager". Only one field, REPORTING_LINE, the value is "Indirect" which is the default value. the other option is direct but doesn't change a thing (seems to be specific to S-S-P)
Are you sure it is not an issue with the dataelement and the filter defined in the admin console?
Thanks,
Laurent

How to influence the text display of key figures in the interarctive DP

Hello all,
Does anyone know if there is a possibility (BADI, etc.) to change the text display of key figures (not characteristics!) in a planning book/data view?
I know that you can define a free text in the data view but still, this is only one fixed text and it cannot be changed.
Reason for the request: We would like to use the same key figure (and hence, indicate 2 different texts) for two different purposes (in different selections) without having to create a new data view.
Kind regards,
Klemens

if you dont want a new data view and might even go to the extent of creating a user exit for this ... here is an idea
- just create auxillary KF ( or use spare Temp KF depending on what you want to do with the data in the view) for each of these KF with the text
lets say you have KF1 and KF2 - create KF1A and KF2A
Make sure KF1A = KF1 and KF2a = KF2
Now depending on user you can display KF 1 and KF2 or KF1a and KF2a depending on the user by using macros USER() and ROW_VISIBLE(0)

NS 9 and Text Display Properties (AFC)

Text Display Properties not working in newScale 9
Has anyone tested the newScale 9 in dev yet? We have an issue where the display properties of a text field is not taking effect when configuring the column length. It will just remain the default length no matter what the value is set at. We have exported the service from nS 9 back to 2008.3 and the text display changes work as expected. Is there a work around for this or is this a known bug?

Hi Craig,
Good news -- there is a hotfix for this already available. If you are going to be installing SP1 for newScale 9, the hotfix is included in the service pack. If you are not planning to install SP1, please contact customer care and ask them for 2009.1_HotFix_FormDataTypeTransform.

Plan order text in CM29 screen

How to display plan order text in CM29 screen? Reply appreciated.

Hello,
I don't know any. Since there is a customer exit exactly for changing the text for the bar, I believe there is not a customization step.
Regards.

Job History in Succession Planning

Hi,
Has anyone used Oracle Succession Planning in R12.1.1 ?
I have setup the module as per the implementation guide.
I am not able to see the Job History of the employee in the Job History box.
Has anyone seen this work? Is there any additional configuration required ?
Any comments on this will he highly appreciated.
Regards,
-Debojyoty

In 10.2.0.5 Grid Control, in order to speed up the response time for the page, 'All' behavior was changed to show only all Jobs executed in the past 24 hours. So when the job activity page loads, you see job history from only the last 24 hrs.
To view complete history, you can switch to advanced search and change search filters to view
complete history. This has been fixed in 11.1 by adding help text on the page.

Recruitment and Succession Planning Infotype maintance maintenance in ECC

Is there a way or transaction in ECC(not using portal) to maintain following infotypes
Work Experience (Infotype 5103)
Education (Infotype 5104)
Qualifications (Infotype 5105)
Desired Employment (Infotype 5106)
Desired Location (Infotype 5107)
etc.
There infotypes are related to Recruitment and Succession Planning
and also same of for maintaning talent group (infotype 5115) maintenance
Thanks
YSS

Dear YSS,
Unfortunately there are no way to maintain these corresponding HRP51* tables in ECC according the documentation : Display/maintenance allowed to limited extent
Usage of standard table maintenance tools is allowed to a limited extent:
- Transaction SE16 allows the display function for this Dictionary object, but no maintenance.
- Generation of a maintenance dialog for this Dictionary object is possible using transaction SE54
- Transaction SM30 does not allow maintenance and display functions for this Dictionary object
Best Regards,
Christine

Career and Succession Planning : Implementation

Dear All,
We have to implement Career & succession planning.Other modules implemented here are SAP HCM-PA,OM,Time ,Payroll,Training & PMS
.I had not worked on Career & succession planning till now.
Will you please guide me to move further ?
Thanks & Regards,
VJ

Hi Vijay,
Currently we are implementing the same.Can u please let me know your findings,integrations required for Career and succession planning and how it is displayed in portal.
Thank u

Succession Planning 3.0: Assigning values to potential, risk, performance

Hi,
In the employee details panel of Succession planning, there is a tab called Talent Assessment. In this tab, there are potential, risk and performance. However, I can't assign a value to it. Where am I supposed to assign these values for the employee?
Thanks.

Hi All,
Yes this is correct - In using the documents available for talent and performance assessments, as well as risk of loss, the values will become populated in SAP's associated infotypes and therefore visible in Nakisa. Risk of Loss is another infotype, not 7408 or 7409, but has the same concept as both performance and potential.
The Nakisa application connects directly to these infotypes to read the stored data. There are a few additional configurations here that also need to be done to display these values in the grid specifically:
In the ABAB Add-on keywords section (Nakisa administrator console, Data center), you will need to define the scales used for performance, potential, and risk of loss values. You will also need to define the criteria ID to use for risk of loss as only one criterion can be displayed in the grid.
Hope this helps!
Agatha

How do I customize the tab text displayed on bookmarked sites?

I often use "open all as tabs" for a bookmark folder of weather.com "5 day forecast" sites covering the towns in a geographical region where I plan to go hiking.
One Firefox browser with six tabs for six towns in my state. "5 day forecast for Gorham," "5 day forecast for Jackson," "5 day forecast for Lincoln," etc.
The problem is the tab displays only some of the first few words of the site description: "5 day forcas," "5 day forcas," "5 day forcas," etc.
I'd like to display only the end of that sentence, which is the name of the town. This way I would have a list of towns across the top of the browser for direct reference.
I changed the "name" property of each bookmark, but that only affects the name in the bookmark collection list, not the display name of a tab in use.

1. With all due respect for your attempt to help; Of course it's part of the page source! That's a given.
2. Again, with all due respect for you bothering; Letting me know that you don't think a thing is doable is not helpful, it's just chat.
Thanks anyway, for your time.
~~~~
My instinct is that of course there is something that could be done, it's a computer, every bit of it is adjustable.
Some browser function grabs the title-tag text for display. It could just as well be redirected by a script (is that the right term?) to grab text held in a list in the bookmark for that page. Let's hear from someone on this idea, please.
The point is, why have titles on tabs if it is junk information? Best use of the small tab text display area would be an abbreviation!

German text is appearing on top of the catalog screen

Hi Experts,
We have migrated from SRM4 to SRM7.0; In our upgraded system,in SRM shop portal we are facing an issue with the display of one hyper link. When punch into Supplier catalog/Internal catalog, German text is appearing on top of the catalog screen for the link to go back to SRM application.
"Zuruck zur SRM-Anwendung"
Highlighted is the German text. Any pointers as of how we can change the text to english ?
Thanks,
Ravi.K

Hello,
Take a look at Note 1347922 - Text "Zurück zur SRM-Anwendung" not translated in English
This should solve your problem.
Kind regards,
Tim

Standard SAP HR Roles in SUCCESSION PLANNING

hai all,
Can any one please let me know what are the standard SAP HR Roles in SUCCESSION PLANNING for user.
Thanks

Hi,
Career and Succession Planning
Purpose
The Career and Succession Planning component enables you to create, implement and evaluate succession planning scenarios. In Career Planning, you can identify possible career goals and draw up career plans for employees. You use Succession Planning to find people to fill unoccupied positions. Career and Succession Planning has two main goals. One is to advance employeesu2019 professional development within a company, the other is to ensure that staffing requirements are met.
Integration
If Career and Succession Planning is integrated with the Qualifications and Requirements component, you can:
Create profiles for objects. You can include these profiles in Career and Succession Planning.
You can compare these profiles against each other (to see how suitable a person is for particular positions, for example).
Integration with the Development Plans component gives you the following functionality:
You can plan and manage your employeesu2019 further training and education
Suitable development plans for eliminating qualification deficits are proposed automatically
See also the recommendations contained in the Integration section of Personal Development.
Features
The Career and Succession Planning component provides you with the following functions:
You can create careers. These describe the various career paths possible within a company. Careers are used in career and succession planning scenarios.
You can use a whole range of planning criteria when working through career and succession planning scenarios. These planning criteria are independent of each other.
You can define user parameters to specify whether essential requirements, alternative qualifications or depreciation meter information should be taken into account in career planning scenarios. See User-Specific Settings.
You can plan for a specific key date.
To identify career and development goals, you can carry out career planning for persons and for other object types.
To identify potential successors, you can carry out succession planning for positions. You can analyze the knock-on effects of succession planning by conducting a simulation.
You can work through career and succession planning scenarios without taking careers into account.
You can display a ranking list for every career and succession planning scenario. This ranking list is sorted on the basis of an objectu2019s suitability. Suitability is expressed as a percentage value.
Suitability percentages should be regarded merely as a criterion for sorting lists.
You can also define suitability ranges and thus structure the ranking list better (Customizing).
You can specify how the system should handle overqualification when the suitability percentage is being calculated (Customizing).
You can display ranking list entries by screen (Customizing setting).
From the career (or succession) plan you can:
Access the profiles of all the objects displayed
Match up profiles with each other
Evaluate qualification deficits
Display training proposals and book courses (business events)
Access careers
Create preferences and potentials
In career and succession planning scenarios, you can designate planning objects for positions. You can then include these designations for the rest of the planning scenario.
If you have found a suitable position for a person, or if you have selected a person as the successor to a position, you can transfer the person directly to the position in question.
Rupa Prasad

Can anyone help me solve the problem of text displaying very rough on my new ASUS PA279Q display monitor running off my MacBook Pro?

This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way --- ROUGH and with "HALOS" around each letter.
All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
Has anyone else had similar issues and figured out a resolution? Help!
MacBook Pro
Retina, Mid 2012, 2.3 Ghz Intel i7
8GB 1600 MHz DDR3
OS X 10.8.5
NVIDIA GeForce GT 650M 1024 MB
ASUS PA279Q

I uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.

What is the different between old and new succession planning?

Hi
I have worked a lot on succession planning in 4.6c. In ECC 6.0, the succession planning has shifted to e-recruitment section.
1. What is the difference between succession planning in 4.6C and ECC 6.0
2. Can I still use the old succession planning in ECC 6.0
3. Is there a requirement to transfer data from old succession planning to new succession planning if we move to ECC 6.0?
Thanks

http://java.sun.com/overview.html
I found that link in five seconds.

Posting Period text display

Hi Gurus,
I have a report where i have my GL account hierarchy on my rows and my key figure in column. i have posting period on top of my key figure and my client wants to display the report as
jan, feb, mar etc till dec. the problem is when i run it through posting period it shows me 1, 2, 3 ...12 instead of text.
my key figure is populating value based on user exit and i cannot use other time fields like fiscal year/period. i cannot create 12 restricted key figures as my key figure is getting value from exit variable.
how do i change the text display for 1,2,3 .....12 to jan, feb, mar....dec. is there any sap exit text variable?
please help
thanks
surya

i cannot create 12 restricted key figures as my key figure is getting value from exit variable.
why cannot u create restricted key figures ?
i didnot understand this....
second question - are u maintaining texts of 0FISCPER3
if yes then enter RSD1
enter 0FISCPER3
edit it
go to business explorer tab
over there display as text only and not key
this way it iwll display just text
if u rnot maintaitng texts for it
u have refer above solutions as mentioned by xperts so that u can load texts for 0FISCPER3
then follow the busines explorer tab changes i suggested...
if u can create restricted key figure ur problem will solve easily..

Succession Planning - German text displayed

Similar Messages

Maybe you are looking for