Successor of SAP Solution Manager SPS 20

Hi!
Has some one of you information about the successor of SAP Solution Manager after SPS 20?
If yes, when the next SPS will be delivered and what will be the new function?
Thank you!

>
Holger Thomasson wrote:
> Has some one of you information about the successor of SAP Solution Manager after SPS 20?
>
> If yes, when the next SPS will be delivered and what will be the new function?
Hi Holger,
The successor is SPS21, which is expected to be released for customers in calendar week 44/2009 (end of October 2009).
[SAP Support Package Stack Schedule|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722640&_SCENARIO=01100035870000000202&]
There does not yet exist any (public) information what improvements are contained in SPS21.
In general, you should expect mainly bug fixes.
Best regards,
Ruediger

Similar Messages

EWA for Business Objects (XI 3.1) within SAP Solution Manager

Hello!
We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
Question
Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

Hello,
The short answer is no. You can verify this in SAP Note 1507629 - Preparing a BOE system for Service Sessions in Sol. Manager.
"...1.) Managed System Setup
Perform the Managed System Setup for SAP BusinessObjects Enterprise as
described in the "End-to-End Root Cause Analysis System Landscape Setup
Guide". This guide can be found in the SAP Service Market Place:
-> http://service.sap.com/diagnostics
-> Navigate to the "Media Library"
-> Open the document "SAP Solution Manager Landscape Setup Guide"
Please ensure that you perform all steps mentioned in the guide which
are relevant for your product and version. Please read also SAP note
1357901, which is also referred to in the above mentioned setup guide."
So this is a requirement. There are also pdf documetns attached to this note that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
Regards,
Paul

Upgrade process to SAP Solution Manager 7.1

Hello!
We use SAP EHP 1 for SAP Solution Manager 7.0 (SPS 26) and plan to upgrade to the new SAP Solution Manager 7.1.
We currently do not have Java Stack there.
Some questions about Upgrade process
1) Can a direct Upgrade from SAP EHP 1 for SAP Solution Manager 7.0 (SPS 26) to SAP Solution Manager 7.1 be realized?
2) Should we first install Java Stack and then proceed with the Upgrade or otherwise?
3) Will Windows 32 Bit and None-Unicode Version of SAP Solution Solution Manager be supported?
It will be great to get some helpful information.
kind regards

Hello!
Trying to answer your question
1) As described in note 1244225, there no restriction to upgrade the Solman EHP1 to solman 7.1. Refer to the section:
In case you do not participate in this current Solution Manager 7.1 beta shipment there are no restrictions for implementing now SP stack 25 and upgrading in the future to an equivilant SP stack of release 7.1."
2) The Solman EHP1 must always be a dual stack system, I am not sure, how you are running the Solman EHP1 without a Java Stack, you should have one.
3) I am not sure if there will be a Solman 7.1 32Bit Non-UNICODE version. But, SAP recommends to run Solution Manager on Unicode (see also customer letter on http://service.sap.com/Unicode). At solman EHP1 there are some issues when running the system as Non_UNICODE, refer note 1383407.
I am not sure if I could clarify all your doubts.
You may check the following URL:
http://service.sap.com/instguides
- SAP Components
- Solution Manager 7.1
As this is a very new software there is few documents in it, but soon you should see a upgrade guide here.
Regards,
Allam

Blank Screen in Message Window of Solution Manager SPS 13

Hi Gurus,
We have SolMan SPS 13 and we have very strang Issue at the ABAP side : The Message Windows ( Most of them ) appears as just plain white Blank Screen i.e. there's a header in the message window but, no msg text as the entire window is pure white i.e. Totally Blank. So, the User ( in Client 000 ) can't read the Messages at all and can not decide which button to click in the Window ?
I checked on the SMP and have no mention of this weird issue - This seems Graphics Related Problem in Client 000.
Even the Solution_Manager and DSWP TCode also has entire screen as Blank ..can't use these TCode and Practically
SolMan is Useless.
Also, Can we configure the SolMan for Local SLD in Production ( non 000) client ? Or 000 Client is MUST for this ?
Was / Is anybody in the Same boat ? Any Suggestions To solve this ?
Sincerely appreciate any / all input on these 2 Issues.
Thanks,
Best Regards,
- Ishan

No Problem ..!
About the SPRO Config > The issue is two fold :
#1 Client has done Config of SolMan / Satellite Sysetms but have no documentation of who did what ( and based on
which SAP Guide / Resources !!)
#2 Even the SPRO Screen has white out - Blank - screen when I go for Config for SolMan
( under the Window 'Preparation for the Configuration of SAP Solution Manager ) , I see again only white screen.
So, I believe unless and untill we run the SGEN ( once we have space for it !!! ) , then I can have this Blank Screen Err Solved and I can move on from there to Profile Parameter Check as well !!
Thanks a Lot Again..
Best Regards,
- IShan

Documentation in SAP Solution Manager.

Hi Experts,
we are looking for documentation (configuration Doc.) for ISU billing in sap solution manager.
could any one please tell me the required steps to get the same.
Thanks & regards
Arpan Saini.

Thank you Shafi for your response.
I have previously looked at the note you suggest but it only seems to contain, for the ERP 6.0 HR module , the support pack 29 (along with SPs for other applications). I've also looked at notes 1156006 for stack 13 which also contains SP29, note 1129210 for stack 12 which contains SP27. These are the only Support Stacks I can find that contain any HR SPs above 24. Note 1081261 for stack 11 has SP22 which is not applicable as we are at SP level 24.
I cannot seem to find any documentation for any of the other support packs 25, 26, 28, 30-34. I know the one for 35 is supposed to be released today so hopefully there will be something put out for that one soon.
Any other help you can provide to point me to the documentation for the other SPs for ERP 6.0 HR would be greatfully appreciated. Again, thank you for your time in responding.
Samantha

Performance issue within SAP Solution Manager

We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to access the desired solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
How can I check whether the SOLMAN works in a pull or push mode, when the data from the satellite systems will be collected and how can this be changed?
As I know there are two ways of sending/retrieving the data:
via RFC (pull)
via CCMS (push)
Which method is faster?
Is there some changes in CCMSPING possible? (interval for sending/retrieving the data)?
Is there some other settings, e.g. like profle parameters (e.g. rdisp/...) that could be performed to solve the problem?
Thank you very much for any helpful information
Regards
Thom

Push is beter for performance. SAP advice.
Maybe activating Central Data Cache on the CEN and SolMan with parameter alert/cache/size_MB can help.
more info here: http://help.sap.com/saphelp_nw70/helpdata/EN/10/75ea3b6d73e807e10000000a11402f/frameset.htm

Questions on "FAQ - SAP Solution Manager for VARs"

Hi,
I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
Sorry for this long text.. hope you have some helpful ideas!
Regards,
Richard

Hello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich

Install SAP Solution Manager with DEV instance in the same server (MCOD)

Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind Regards

Hi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C.

Error in installation of Sap Solution Manager - AIX / Oracle

Hello,
We are installing SAP Solution Manager in Operating System is AIX 5.3 and Database System is Oracle 10.2
After the Oracle Installation, in the phase of Abap Import (16 of 44), we are
receiving the follow error message:
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
ERROR 2007-04-12 15:27:41
CJS-30022 Program 'Migration Monitor' exits with error code 2. For
details see log file(s) import_monitor.java.log, import_monitor.log.

The installation export DVD was copied to local machine (the directory
list is attached in zip file). We get this DVD from
service.sap.com/swdc.
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
IMPORT_MONITOR.JAVA shows this message:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
And the directory is OK
/oracle/install/51032524
ls -l
total 160
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.ASC
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.EBC
-rwxrwxrwx 1 root system 9093 Apr 12 09:54 COPY_TM.HTM
-rwxrwxrwx 1 root system 5787 Apr 12 09:54 COPY_TM.TXT
-rwxrwxrwx 1 root system 8559 Apr 12 09:54 CRCFILE.DAT
drwxrwxrwx 4 root system 256 Apr 12 10:03 EXP1
drwxrwxrwx 4 root system 256 Apr 12 10:11 EXP2
drwxrwxrwx 4 root system 256 Apr 12 10:14 EXP3
drwxrwxrwx 4 root system 256 Apr 12 10:16 EXP4
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.ASC
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.EBC
-rwxrwxrwx 1 root system 20 Apr 12 09:54 LABELIDX.ASC
-rwxrwxrwx 1 root system 22361 Apr 12 09:54 SHAFILE.DAT
-rwxrwxrwx 1 root system 22 Apr 12 09:54 VERSION.ASC
Please, anybody have any idea?
Thanks for help,
Carlos Nogueira

Hi Carlos, can you resolve this ? because i have the same problem, but with sql and win 2003.
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) Client VM (build 1.4.2_15-b02, mixed mode)
Required system resources are missing or not available:
Import directory sapinst\saptrans\D51032007\EXP1' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP2' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP3' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP4' does not exist.
thanks in avance.

Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"

I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PM

Hi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram

Error in Import Java Dump phase while installing SAP solution Manager 7.1

Hi,
While installing SAP solution manager 7.1 I am getting the below error during the phase "Import Java Dump".
An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step : Execution of JLoad tool 'C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx1024m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/sharedlib;D:/usr/sap/SPT/SYS/exe/uc/NTAMD64/mssjdbc/sqljdbc.jar" -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir "D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP" -job "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
JLOAD.JAVA log details below
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Jload R 7.12 V 0 A 0
Jload -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP -job C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Connecting to database
Couldn't connect to DB
com.sap.inst.common.exception.DBConnectionException: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:157)
     at com.sap.inst.jload.Jload.main(Jload.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.common.db.DBConnection.connectViaSecureStore(DBConnection.java:111)
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:151)
     ... 6 more
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
I have gone thru with the notes and it didn't help me much.
I have used J2SDK 1.4.2_17 nad JCE_Policy-1.4.2 files.
Please let me know where IO went wrong.
Thanks in advance.
Sai

Hi,
1. Did you select java path (Export CD/DVD) while intsallation? Check once again.
2. Add JAVA_HOME = Java path in environment variable.
3. What is the exact error, you got it, post error here.
Regards,
Srini Nookala

How to Unlock the Object in SAP Solution Manager

Hi all,
Iam trying to Upload the TS into Solution manager, but the Project Documentation TAB is locked by another User.So i am unable to get ADD button enable
I dont have access to SM12 or SE03. How to Unlock this
Regards

This is not the right forum to ask your doubt. Post this in Solution Manager forum
SAP Solution Manager
Regards,
Prateek

Document Management in SAP Solution Manager

Hi All,
I would like to know If you are using SAP Solution Manager as a central tool for overall Documentation Management?
Could you please share some information about your solution?
Many thanks.
Regards,
Ridouan

Hi Ridouan,
For this i suggest two options:
*Use Template Projects to manage templates:
http://wiki.sdn.sap.com/wiki/display/SM/Template+Projects
*Use Solutions to re-use some structures:
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/87/38037ccd314c9aac4f026f1ba34558/frameset.htm
further about document management: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/46/87f790498b5cede10000000a114a6b/frameset.htm
Kind regards
Fabricius

FAQ - SAP Solution Manager for VARs

You can find further technical questions around configuration & functionalities in a comprehensive
FAQ to SAP Solution Manager for VARs.
This FAQ covers questions and answers around:
    > SAP Solution Manager, enterprise edition
    > SAP Solution Manager VAR setup: configuration of Service Desk
    > Work Center Service Desk: functions & configuration
    > Work Center System Monitoring: setup of SAP EarlyWatch Alert
You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
Please notice: The FAQ will be updated from time to time.
Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
Edited by: Susanne Schlehf on May 18, 2009 12:56 PM

Hello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich

SAP Solution Manager - Learn and Use

Hi All,
I have some knowledge in SAP ABAP. I am interested to learn about SAP Solution Manager and how to work in it.
Can anyone help me in this regard? If you have any documents or presentations, please let me know.
Thanks in advance.

Hi,
First start with learning what solution manger can do.
http://service.sap.com/solutionmanger
then click on Media library on left hand pan there first go through use case presentations, which will give an insight into possibilities.
Then you can explore more.
Hope this helps.
Feel free to revert back.
--RAgu

Successor of SAP Solution Manager SPS 20

Similar Messages

Maybe you are looking for