Succsess!!!

Yey!
I am a new mac user and i just bought a new intel mac. After importing over 10K of picures, I was woefully unhappy with iPhoto. it took (i timed it) 1:15 to load and 1:20 to close! (thats 1 minute btw).
So i browsed the forums and i thought I would try the Onyx repair permissions thingy. HOLY CRAP. iPhoto now loads in like, 6 seconds. Its amazing. So, if anyone is having problems after a large import with the out-of-the-box iLife 6 on the intel imacs, use onyx. seriously you wont believe it.
I cant wait to get that extra stick o' ram.
So, the purpose of this post: What does "repair permissions" do? is it like a registry editor? Sorry but i have only had my imac for 5 days.
happy photoing.
me

Hi jsblack,
Here is probably more info than you want to know about the permissions
http://docs.info.apple.com/article.html?artnum=106712

Similar Messages

Need advice about making a application log over every task succsessfully done to a target

Hi!!!
I need an advice about how to make an application log over every task succsessfully done to a target with an unique ID.
I have developed an application with several tasks on the menu which have to be done in a certain order to program and test a target board,
and the user want a log about which tasks are done to the target, so it is easy to know which step is next on the menu (It is a very routinebased job).
Do somebody have any good advice on how this can be done in a cleaver way ?
Best regards,
A

Also, now that I have an ethernet cable, if I go ahead and use migration assistant to transfer the account from my old computer, will Logic only be available through the new account I have set up on my new computer? Would I have to log out of one account and into the other and back and forth to access the different files/programs? Any help would be much appreciated

Iphone after succsessful unlocking

I have iphone 5 at&t model A1428, IOS 8.2 clean without contract.
Yesterday I sent a request to unlock online AT&T. Request is successful. I talked to customer support, they confirmed that my phone is unlocked.
But I put my sim card GSM operator from a country outside the United States. I am now outside the United States. And my phone says that it can not work with this sim card.
I shall carry out any instructions. Restores phone. Restores in DFU mode. But I did not help. Customer Support AT&T advised to call Apple. They claim that they have everything in order.
Give me a phone number where I can help in my question?

Hi BazzTex,
Thank you for using Apple Support Communities.
I see you are having issues getting an unlocked phone to work with a new carrier. It sounds like AT&T has done what they needed to do, now you will need to contact your current carrier, the one you got the new SIM card from. For contact info for your carrier, see this link:
iPhone - Contact Support - Apple Support
Select your carrier from Carrier Support, but look at the round flag icon in the lower right corner to be sure you have your current location selected. Click on the icon and select it if not already selected.
Regards,
Jeff D.

TS1398 I am unable to connect iPhones to our home wifi. Other devices work fine.

Recently, I was having issues with our D-Link Dir-665. I did a factory reset to it on the routers settings (ie. 192.168.0.1). I was able to succsessfully connect my laptop, as well as our Kindle Fire HD. However, when trying to connect our iPhones (4 & 4s), it does not even see the SSID. So, we tried setting it up under "other network" and it says "Could not find network". After searching some other forums we also ended up reseting the network settings, hard resets and syncing the devices as well. All to no avail. . The router gives the option to add the device but requires a PIN from the devices (not really sure if this will even help)...
When I reset the router I am sure it probably reset things like the WPA and channels etc. I am pretty lost at this point. Help
Thanks

I was able to do a full reset on the router (pushing the tiny button near the power input). Then ran through the setup process and it started working on my device.

How to print new line in webdynpro

Friends,
I want to print a success message in new line, the below shown is a one singe line and want to split two lines.
I used this:
wdComponentAPI.getMessageManager().reportSuccess("Example : this is the test message i would like to print in two lines, some how it is not working please help me how to "+
"/n/n print this in two new lines.")
when i execute the above code it is displaying on screen as succsess message as below shown in one line:
Example : this is the test message i would like to print in two lines, some how it is not working please help me how to print this in two new lines.
But my requirement expecting some thing below shown:
Example : this is the test message i would like to print in two lines, some how it is not
working please help me how to print this in two new lines.

really? how? Ó.o

Why can I not get a video downloader?? They dissappear and or don't show up after selecting them fromthe add on page??

I had a simple easy downloader on my fox page it left a green arrow on the bar for downloads, all I needed to do was click on it and pick the type i wanted (mp3 or flv etc) but youtube was giving me ahard time when I tryed to download more then one video, I would get all the same ones as the first one, so i tryed a different downloader it showed a video reel as it's symbol and it seemed to work but then I accedently clicked on something and it dissapeared. Now whenever i go to the add-ons to get one it says I's been done succsessfully but doesn't show up once I get back to my home page???Can you help fix this issue please!!

I good video downloading software that I recommend and use, is the [http://www.freemake.com/free_video_downloader/ Freemake Video Downloader]. It is free and comes with a Firefox add-on.
I use it to download my friends' YouTube videos.
<b>NOTE: </b>This program is <b>NOT</b> to be used for piracy or other illegal activities.
<b>WARNING: </b>Always use caution when downloading content from the internet. I will take no responsibility for any damage caused by a download. <b><u>Download at your own risk!</u></b>

Repaint() - problems with queueing/blocking

hello,
im writing a game as an applet using awt, but i cant get the repaint() method to execute where i would want it to.
import java.applet.* ;
import java.awt.* ;
import java.awt.event.* ;     //depreciated
import java.util.* ;
public class matches_applet     extends Applet
                    implements ActionListener , MouseListener , ItemListener {
     // var declarations
     // init
     // reinit for starting new game
     // waiter for simulating "thinking"
     public void move( int srcX , int srcY , int destX , int destY ) {
          //check if vaild move...
               // mode : 1 = single player , 2 = mulitplayer
               // player: 1 = human , 2 = human/computer
               if (mode == 1 && player == 1 ) {
                    waiter() ;     //simulate computer player "thinking"
               //add move to list of done moves...
               System.out.println("repaint attempt");
               try {
                    Thread.currentThread().sleep(2000);
                    field.repaint();
                    Thread.currentThread().sleep(2000);
               } catch ( Exception e ) {}
               System.out.println("repaint succsessful");
               if (mode == 1 && player == -1 ) {
                    //send human move to ai...
                    //receive ai move
                    //write ai move to vars fromX , fromY , toX , toY
                    move( fromX , fromY , toX , toY ) ;
     // listeners
     // move invoked from mouseClicked( MouseEvent mouse ){}
     public class CentrePanel extends Canvas {
          @Override
          public void paint( Graphics g ) {
               System.out.println("repaint in");
               // paint stuff
               System.out.println("repaint out");
}now when i attempt to move a pawn, my console prints :
     repaint attempt
     repaint succsessful
     repaint attempt
     repaint succsessful
     repaint in
     repaint out
for the part inside the move.
insted it should print ( correct me if im wrong ) :
     repaint attempt
     repaint in
     repaint out
     repaint succsessful
     repaint attempt
     repaint in
     repaint out
     repaint succsessful
i know that the
if (mode == 1 && player == -1 ) {...}is blocking the queue, but i dont know how to get it not to.
thx for any answers in advance,
westernmagic
Edited by: westernmagic on Feb 1, 2009 5:36 AM

Pete_Kirkham wrote:
An alternative approach is to bypass the event queue and call paint directly with the components Graphics object whilst in the loop.
Pete[http://forums-beta.sun.com/thread.jspa?messageID=2065345]
thanks Pete.
@ admin/mod : feel free to close.
Edited by: westernmagic on Feb 1, 2009 1:26 PM

EJB 3.0 Locking (entity not in the persistence context)

hi all,
i have some problems about locking,
i have 1 remote and one local interface
1. Remote Interface
public @Stateful
@Remote(RemoteInterface.class)
class RemoteInterfaceBean implements RemoteInterface
       @PersistenceContext(unitName = "CustomerCareOracle")
     private EntityManager oracleManager;
        public MySomeEntityObject object;
       @EJB
        MyLocalInterface inter;
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    public void fillMyObject(someparameters .... )
      // filling MySomeEntityObject object
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    public void commitMyObject()
      inter.AnotherOperatOnObject(object);
      oracleManager.persist(object);
2. My Local Interface
public @Stateless
@Local(MyLocalInterface.class)
class MyLocalInterfaceBean implements MyLocalInterface
       @PersistenceContext(unitName = "CustomerCareOracle")
     private EntityManager oracleManager;
        @TransactionAttribute(TransactionAttributeType.REQUIRED)
         public void AnotherOperatOnObject(MySomeEntityObject object)
               oracleManager.lock(object,LockModeType.READ);
// <= Here I Got An Error
               // do some operation and is succsess, It's very good ;)
}     when i tryed to lock object i got an error, i can't resolve this problem :(
can anybody help me ?
error trace
17:43:21,343 ERROR [errorCat] java.lang.IllegalArgumentException: entity not in the persistence cont
ext
        at org.hibernate.ejb.AbstractEntityManagerImpl.lock(AbstractEntityManagerImpl.java:336)
        at org.jboss.ejb3.entity.TransactionScopedEntityManager.lock(TransactionScopedEntityManager.
java:101)
        at com.magti.businesslayer.ejb3Fasade.oracle.ccare.TransactionFasadeBean.lockAccounts(Transa
ctionFasadeBean.java:203)
        at com.magti.businesslayer.ejb3Fasade.oracle.ccare.TransactionFasadeBean.doAfterCheck(Transa
ctionFasadeBean.java:76)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:112)
        at org.jboss.ejb3.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:166)
        at org.jboss.ejb3.interceptor.EJB3InterceptorsInterceptor.invoke(EJB3InterceptorsInterceptor
.java:63)
        at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)
        at org.jboss.ejb3.entity.ExtendedPersistenceContextPropagationInterceptor.invoke(ExtendedPer
sistenceContextPropagationInterceptor.java:57)     Regards,
Paata.

It looks like you're trying to call lock before the entity has been created within the persistence
context. Persist the entity within the persistence context before calling lock.

Showing values beside html5 slider

I have a page layout that I rather not break, and on the particular page (http://www.evolvedtools.com/hardwareTools.html) I have a range slider that I have been playing with.
I have been looking at some examples where people have been able to constantly display the value of the slider, alongside the handle , as it is being moved. The values are not what's important for now, but rather the implementation in my existing code. I am not willing to restructure my whole page to fit it in.
In the code for my page I have commented out the code for a "bubble" solution I picked up on the net. It produces a little container that is supposed to follow the range slider and display a value for it. It doesn't work for me though, and I am not all that surprised, as I guess the implementation is a little bit more difficult in my case than the example..... ( Example: http://css-tricks.com/value-bubbles-for-range-inputs/) I see that it makes use of webkit elements also, which I don't like...
So my question is: Where would I have to go from here to implement such a feature ?
page HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Hardware Tools</title>
<link href="evolvedMobile.css" rel="stylesheet" type="text/css" media="only screen and (min-width: 0px) and (max-width: 650px)" id="stylesheet-650" />
<link href="evolvedTablet.css" rel="stylesheet" type="text/css" media="only screen and (min-width: 651px) and (max-width: 1000px)" id="stylesheet-800" />
<link href="oneColLiqCtr.css" rel="stylesheet" type="text/css" media="only screen and (min-width: 1001px)" id="stylesheet-1920" />
<script src="http://cdn.jquerytools.org/1.2.7/full/jquery.tools.min.js"></script>
<Script type="text/javascript" src="respond.min.js"></Script>
<script src="SpryAssets/SpryEffects.js" type="text/javascript"></script>
<Script type="text/javascript" src="Javascript Cookie Script.js"></Script>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
function MM_effectAppearFade(targetElement, duration, from, to, toggle)
    Spry.Effect.DoFade(targetElement, {duration: duration, from: from, to: to, toggle: toggle});
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
</script>
<style type="text/css">
body,td,th {
    font-size: 0.70em;
    font-family: "Arial Black", Gadget, sans-serif;
</style>
</head>
<body bgcolor="#000000" onload="MM_preloadImages('images/HomeMainBlank2_03.png','images/HomeButton_03.png','images/ToolingButtonBlank2_07.png','images/BlogBlankM_07.png','images/Script_07.png','images/PluginTheory_05.png','images/flashBack_12.png','images/umlPage_12.png')">
<div class="TabWrapContent" id="wrapperExt">
<div id="homebutton"><a href="index.html" onmouseover="MM_swapImage('homebutton','','images/HomeButton_03.png',1)"onMouseOut="Set_Cookie('homeHardware','TRUE','','','','')"><img src="images/HomeMainBlank2_03.png" alt="HomeMain" name="homebutton" width="138" height="55" border="0" class="AllElements" id="homebutton2" /></a></div>
<div id="PluginM"><a href="PluginT.html" onmouseover="MM_swapImage('PluginM','','images/PluginTheory_05.png',1)"onMouseOut="Set_Cookie('PluginFromHardware','TRUE','','','','')"><img src="images/ToolingButtonBlank2_07.png" name="PluginM" width="142" height="55" border="0" class="AllElements" id="PluginM2" /></a></div>
<div id="Scripting"><a href="ScriptsT.html" onmouseover="MM_swapImage('Scripting','','images/Script_07.png',1)"onMouseOut="Set_Cookie('ScriptingFromHardware','TRUE','','','','')"><img src="images/BlogBlankM_07.png" name="Scripting" width="135" height="55" border="0" class="AllElements" id="Scripting2" /></a></div>
<div id="umlTools"><a href="UmlTools.html" onmouseover="MM_swapImage('umlTools','','images/umlPage_12.png',1)"onMouseOut="Set_Cookie('umlToolsFromHardware','TRUE','','','','')"><img src="images/flashBack_12.png" name="umlTools" width="125" height="55" border="0" class="AllElements" id="umlTools2" /></a></div>
</div>
</div>
<div id="contentWrap">
<div id="wrapperExt2">
<p> </p>
<p><span style="font-size:1em;">Hardware Tools</span> is a term I hope will seem pretty self explanatory. This page is meant for descriptions of useful hardware electronic and ergonomical tools. To get a decent workflow going it is increasingly important to multitask, even when doing art or design - work. People have preferences according to their profession or field of interest, but the designer aspect is emphasized here. Also note that I am here referring to more or less mobile solutions for the individual designer.<br />
<br />
Firstly, for me I have slowly come to the conclusion that your workstation(read laptop/pc) and its specs are not going to be the piece of equipment that is most importent to you. With a decent processor, graphics card and installed memory you really can squeeze A LOT out of your mid -range machine. I will take examples from my own setup here to show you what I mean, and the interconnectivity you can acchieve through peripherals. I am talking everything from tuning software, through harware add - on's, to monitors, tablets, cell phones, networks, graphical equipment, etc..<br />
<br />Both at home, at work and on- the- go there is increasing need for efficiency and productivity. But the large workstations are on their way out. Ordinary desktops, desktop monitors and the like have seen their glory days, and efficient computer development reduces the need for large hardware solutions. Computing is being distributed across several pieces of equipment, as opposed to being centered in a core. Mechanically, this can be seen in solutions like the ones where your average laptop has its capacity expanded by establishing an externally housed pci-express card through the laptop's expresscard slot. Storage solutions working on cloud platforms make the need for tactile storage components redundant. This eliminates a lot of permanent hardware- needs for the traveler. And then you have visual aspect with screen real estate being a keyword. As an example here I would like to refer to a brand by the name of <a href="#" onclick="MM_openBrWindow('http://www.displaylink.com','','scrollbars=yes,resizable=yes,width=625,height=625')">DisplayLink</a>. This is a company that develops solutions for USB - connected Display solutions, like portable monitors. They make use of their own graphic adapters in the hardware, so you are not limited to the ordinary 1 extra display per standard workstation. With USB 3.0 making its presence felt, the bandwith will allow these solutions to get even better. This is of course due to the higher bandwidth that the new USB provides. On a regular pc you can connect up to 6 USB displays, and 4 for the Mac. On Windows multipoint server up to 14 displays are supported. This is of course without counting the extra displays supported by your graphics card/s. The ingenious thing about these products is the way they relieve the stress on your main hardware in that they distribute the graphics computing to several instances. This means you do not have to have a powerhouse pc to be productive on more than two displays. The graphics adapters rely on your internal cpu, but do not need much else. Hook up to any HDMI or DVI monitor or projector anywhere instead of dragging things around with you. I strongly suggest checking out their page and their products(DisplayLink), and see which products they have avaiable for your region. <br />I am currently using several DL-3500 chip graphics adapters for 1920x1200 monitors connected to my laptop. They are small and handy and I can take them with me and hook them up anywhere for more screen real estate. The difference between the fluidity of a usb 3.0 monitor setup and a usb 2.0 one is quite noticable. The adapters are really pretty gentle on your processor though, so no big worries there. I know other companies have produced solutions for multiple monitors earlier, but those looking for extensive monitor setup nowadays should test a multi monitor usb 3.0 hub from DisplayLink. And if you are going to the desolute place that doesn't have any kind of stationary monitors available you can always get one of the highly affordable, portable USB displays(Also Displaylink) and put it in you backpack. But we don't have to stop there. Finally good ultra - portable projectors with HD - resolution have started to hit the market, and I mean projectors that both have decent spesifications, are extremely portable and don't have lamps that have to be changed. Brightness, colors and resolution have usually been poor in these kind of devices, but the bar has been raised.<br />
<br />So what else would a nomad designer need ? Well, for one thing touch would be nice! And while we're at it, graphical capabilities would also be something many would crave. So lets have a look at the options. If you are using a internet tablet with touch( Android or ios), you can now use it as an extended desktop. A lot of tablets have something called a ADB composite interface(Android Debug Bridge), which is a way for your computer to interact with your tablets file system. It is also a way of enabling software developers to make applications that let you control your computer from your tablet, not only your tablet from your computer. An example is the software application <a href="#" onclick="MM_openBrWindow('http://www.shapeservices.com/en/products/details.php?product=idisplay&platform=android','','scrollbars=yes,resizable=yes,width=625,height=625')">IDisplay</a> from Shapeservices, which lets you connect your tablet via the composite USB cabel and use your tablet as an extended desktop. The nice thing about this is that you can use input from your tablet(Touch with fingers, stylus pen, keyboard, mouse) to control applications on your computers operative system. While graphically this is mostly for sketching, it can also be used succsessfully in other applications. Also this software enables you to connect through any wireless connection, so you are not limited to the composite cable if you don't have it. Which brings me to the point of networks.<br />
<br />4G wireless modems have hit the market some time ago, but they are not limited to a dongle in the side of your laptop. In fact they can and will feed your whole household with an internet connection if you use it right. Simple as this: Almost all routers use linux software, so the problem has been developing drivers for using the USB 4g dongles with a USB - enabled router. I am currently very successfully using a <a href="#" onclick="MM_openBrWindow('http://www.draytek.com/user/PdInfoDetail.php?Id=121','','scrollbars=yes,resizable=yes,width=625,height=625')">Draytek</a> Vigorfly200 802.11b/g/n router connected to my Netcom 4g dongle, and besides being fast I can take it with me everywhere and (depending on location) still get the same fast speed for everyone to use. If you are streaming or connecting devices wirelessly, this is gold! They have written drivers for 4g dongles, so a firmware update does all the work for you.<br />
<br />But, returning to graphic designer work, there are some options that I feel have completely erased the need for things like the traditional paper - based drawing surface. The reason I am saying this is that these tools are so precise and make the transition from computer to drawing so minimal, that the thought process of designing/programming/sketching becomes a lot more interesting and intuitive. The problem with relatively great products earlier that use a separate mat surface for drawing, separate from the screen, is the hand/eye coordination. I have used one myself and still occasionally do, but there is no question whatsoever that seeing the direct result of your brush stroke without having to move your eyes one way or the other is a better way of interacting with your work. Why drive your car with a remote control if you can sit inside ? Let's go straight to the products, and you can judge for yourself. The king of the hill is as of now the <a href="#" onclick="MM_openBrWindow('http://www.wacom.com/en/Products/Cintiq.aspx','','scrollbars=yes,resizable=yes,width=625,height=625')">Wacom Cintiq 24HD</a>, which lets you draw on a supreme ergonomical- design monitor with detailing and specifications that will satisfy any business. It works also of course as an extended desktop, so again you get increased productivity. I am not going to say more, but take a look for yourself. Of course, these products are kind of pricy, but there are alternatives. Chinese Yiynova produce three notable drawing monitors in <a href="#" onclick="MM_openBrWindow('http://www.amazon.com/Brand-Yiynova-Digitizer-Tablet-Display/dp/B005EDNAPU','','scrollbars=yes,resizable=yes,width=625,height=625')">10"</a>, <a href="#" onclick="MM_openBrWindow('http://www.amazon.com/Yiynova-Monitor-MSP15-Adjustable-Support-Windows/dp/B005EIF3BY','','scrollbars=yes,resizable=yes,width=625,height=625')">15"</a> and <a href="#" onclick="MM_openBrWindow('http://www.amazon.com/Yiynova-Tablet-MSP19-19inch-1440x900/sim/B004CUT6NG/2','','scrollbars=yes,resizable=yes,width=625,height=625')">19"</a>, and while their spesifications are as good as most of the wacom's, the prices are way lower. Again, you have to decide for yourself.<br />
<br />Moving on to add- on products, I would like to mention the standards of EsataP and USB 3.0. If you have a 2 year old mid - range machine, chances are you do not have the new USB 3.0 ports. For quite a while I have been using the esatap ( external sata powered) port on my computer for external harddisk backup. SATA is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. On a lot of laptops or desktops you have the possibility of either installing an esata card or you may have an esataP port on your laptop. What you in fact then have is a combined USB/esata port with speed that nearly rivals the new USB 3.0 standard. Using an esatap cable you can get up to 100 MBytes/s transfer speeds to or from your external drives for now. The port conncets directly to your sata harddrive, so the theoretical speed is 3GBit/s which is 375Mbytes/s, or in practice more like 300MB. If you have one of these ports I strongly suggest you use it. People have made a big deal about the need for shutting down your system before removing your esatap device, but that is completely unneccesary. I will just say <a href="#" onclick="MM_openBrWindow('http://mt-naka.com/hotswap/index_enu.htm','','scrollbars=yes,resizable=yes,width=625,height=625')">HotSwap</a>.<br />
<br />If you have an expresscard 34 or 54 slot you can of course add an expresscard with usb 3.0 port/s, but tests show that the expresscard interface and the 2.5Gbit/s limit of your revision 1.0 or 1.1 pci-e will not give you full USB 3.0 speeds, and even if you had a revision 2.0 or later (5GBit/s), you would still have to have have the ExpressCard 2.0 slot on your machine, as only this makes use of the full bandwith of the USB superspeed(3.0). With the more ordinary ExpressCard 1.0 slot you still get 2.5 GBit/s which is actually very much faster than USB 2.0.<br />
<br /> More to follow.....</p>
</div>
</div>
    <div class="slider" input type="range" name="eivi" max="-6" min="2000" step="1" value="0">
    <div class="progress" style="width: 3px;"></div>
    <a class="handle" style="top: 0px;"></a>
</div>

<script type="text/javascript">
// get handle to the scrollable DIV
var wrapperExt2 = $("#wrapperExt2");
// initialize rangeinput
$(":range").rangeinput({
// slide the DIV along with the range using jQuery's css() method
onSlide: function(ev, step) {
wrapperExt2.css({bottom: step});
// display progressbar
progress: true,
// initial value. also sets the DIV's initial scroll position
value: 0,
// this is called when the slider is clicked. we animate the DIV
change: function(e, i) {
wrapperExt2.animate({bottom: i}, "fast");
// disable drag handle animation when when slider is clicked
speed: 0
</script>
<script type="text/javascript">
$(function() {
var el, newPoint, newPlace, offset;
// Select all range inputs, watch for change
$("input[type='range']").change(function() {
   // Cache this for efficiency
   el = $(this);
   // Measure width of range input
   height = el.height();
   // Figure out placement percentage between left and right of input
   newPoint = (el.val() - el.attr("min")) / (el.attr("max") - el.attr("min"));
   // Janky value to get pointer to line up better
   offset = -1.3;
   // Prevent bubble from going beyond left or right (unsupported browsers)
   if (newPoint < 0) { newPlace = 0; }
   else if (newPoint > 1) { newPlace = height; }
   else { newPlace = width * newPoint + offset; offset -= newPoint; }
   // Move bubble
   el
     .next("output")
     .css({
       top: newPlace,
       marginLeft: offset + "%"
     .text(el.val());
// Fake a change to position bubble at page load
.trigger('change');
</script> */
<script type="text/javascript">
if (Get_Cookie('homeHardware')) { document.getElementById('homebutton2').src="images/HomeButton_03.png" ; }
if (Get_Cookie('PluginFromHardware')) { document.getElementById('PluginM2').src="images/PluginTheory_05.png" ; }
if (Get_Cookie('ScriptingFromHardware')) { document.getElementById('Scripting2').src="images/Script_07.png" ; }
if (Get_Cookie('umlToolsFromHardware')) { document.getElementById('umlTools2').src="images/umlPage_12.png" ; }
</script>
</body>
</html>
CSS ( for the "bubble element"):
/*.output {
    position: absolute;
background-image: -webkit-gradient(linear, left top, left bottom, from(#444444), to(#999999));
background-image: -webkit-linear-gradient(top, #444444, #999999);
background-image: -moz-linear-gradient(top, #444444, #999999);
background-image: -ms-linear-gradient(top, #444444, #999999);
background-image: -o-linear-gradient(top, #444444, #999999);
    width: 30px;
    height: 40px;
    text-align: center;
    color: white;
    border-radius: 10px;
    display: inline-block;
    font: bold 15px/30px Georgia;
    top: 50%;
    left: 100%;
    margin-top: -195px;
    margin-right: -185px;
    margin-bottom: 1%;
    margin-left: -180px;
    /*bottom: 175%;
left: 0;
margin-left: -1%; */
.output:after {
content: "";
position: absolute;
width: 0;
height: 0;
border-top: 10px solid #999999;
border-left: 5px solid transparent;
border-right: 5px solid transparent;
top: 100%;
left: 50%;
margin-left: -5px;
margin-top: -1px;

I would use jQuery UI Slider for this -- click on examples for other options.
http://jqueryui.com/demos/slider/#slider-vertical
Nancy O.

File to idoc with BPM

Hi All,
I have one File to IDoc Scenario. Now I want to throw posting error in a file.
i.e., if mapping goes not well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a file(Flat file) will be created at sending system side.
I am planning to design this scenario with BPM. Now end user requires a akwoledgement for this scenario eithere it may be succsess or failure in file format. If succsess the file will be created with succsess information(any format), either failure also file will be created with error information. The user requires only file format b'coz this file will be read by another java application (user didn't require to his mail).
Can anybody suggest the solution for this:
1. How to generate aknowledgement file for sucsess or failure.
2. How to use this file to idoc scenario in BPM with out using Alert configuration or Mail adapter.
Regards,
Konala.

Hi,
As you know Idocs are used for asynch communication, only was to get acknowledgemnet is using ALEAUDIT. For your scenario there can be one work around. When you post IDoc in the, in that function module after the posting is done call one more RFC with the the success/failure message which will trigger RFC to File sceanrio.
If you get any other solution, please post it back to same thread.
Thanks,
Prateek

Adobe Photoshop CC & CS6 crashes after lunch

Iam realy mad right now.
Nether Photoshop CC is running, nor CS6. Both getting suspended direktly after lunch.
I tryed everything. Lougout from appmanager, restart appmanager, reset derfault settings of Photoshop even a complete reinstall of applications with the cleaner and a complete reinstall of windows and applikations. Photoshop CC is not working, CS6 can be used till i install the new fancy and buggy application manager.
I NEED PHOTOSHOP for my work. And that i did all these attempts to solve the issue and downloaded everything 4 times because you dont provide the possibility of an offline installation is very, very generous of me. I am not a newbie, i know my system.
get that problem fixed !
edit: .... sry for my tone, but i spend to much time on that issue. I realy like you Adobe, even the CC concept. But this is driving me crazy

Try to update all CS6 and or CC. That did the job on my PC.
kglad wrote:
you just need to fix a server error issue: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html
kglad, that had not done the job. I did a lot of other stuff like deleting windows font and such things, without succsess.
Today, there was a notification for an update for Photoshop CS6, i installed it and viola, PS CS6 & CC are working fine ! I cant imagine that it was the update. My feeling is they changed something with Creative cloud "license account thing" . If it was the Update, why the update for CS6 would also fix CC ?
anyway, it is working !
Thanks Adobe

Help with running OS X 10.5 with a GMA X3100 video card

I am trying to boot Mac OS X 10.5 on my iPod. I kept booting, and every time it came up with a kernel panic. I ran it in Verbose mode, and it said that the video card was not supported. The updaters said that my iPod didn't meet the requirements, which I think that Leopard needs to be succsessfully booted to be able to update. I need help booting into Leopard so I can do some things.
Jack

BGreg wrote:
Mac OS X 10.5 can't run on an iPod. A MacBook, yes, an iPod no.
I have been able to run Cheetah and Tiger on it. Also, the partition is Mac OS Extended (Jounaled) and the disk has the GUID Partition Table. The iPod is a 2nd gen "Touch Wheel" iPod, 20 GB. The HD on my MacBook is just about full, so what other way can I use Leopard without using an external drive?

Connect to SAP gateway failed Connect_PM TYPE=B

Hi experts,
I get the following error when i ping through JCO destinations on portals.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=imtsapdev01 GROUP=CLUST R3NAME=DMI MSSERV=sapmsDMI PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       partner '127.0.0.1:3310' not reached TIME        Tue Jan 27 16:39:54 2009 RELEASE     700 COMPONENT   NI (network interface) VERSION     38 RC          -10 MODULE      nixxi.cpp LINE        2823 DETAIL      NiPConnect2 SYSTEM CALL connect ERRNO       10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER     1
However my JCO destinations were working perfectly until recently. I checked on the logon group. I have one called CLUST, which i use for this purpose.
I have also checked both service files and they have the following for the ECC server im connecting to.
3610 because its system number 10 i am connecting to.
sapmsDMI 3610/tcp
From the JCE destinations screen i cannot even ping the server. I can though when i log on to the server through remote desktop.
thanks and regards
dilanke
as a reply to nishants posts.
goto rz70
give hostname -->
service --> sapgw00 (sapgw(instance number)
execute it
click on yes
check rfc call (success or failed)
I have done this. i left hostname as "blank" gave service as "sapgw10"
The following is what i got as the output.
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDRFC
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDMSGSRV
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDIPSERV
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDINSTSP
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDINSTSC
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDGWSRV
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDDBSYS
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDCOMPSYS
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDCLIENT
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDBCSYS
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDAPPL_SERV
    0: IMTSAPDEV01_DMI_10                        : Execute program: SLDASSOC
    0: IMTSAPDEV01_DMI_10                        : Collection of SLD data finished
    0: IMTSAPDEV01_DMI_10                        : Data collected successfully
    0: IMTSAPDEV01_DMI_10                        : RFC data prepared
    0: IMTSAPDEV01_DMI_10                        : Used RFC destination: SLD_NUC
    0: IMTSAPDEV01_DMI_10                        : RFC call failed: Error opening an RFC connection.
    0: IMTSAPDEV01_DMI_10                        : Existing periodic jobs removed. Number: 1
    0: IMTSAPDEV01_DMI_10                        : Program scheduled: 20090127 184357
    1: IMTSAPDEV01_DMI_10                        : Event-controlled job already exists; scheduling not necessary
so i guess its not successful. when i look at rz70 of a server where this works correctly its not succsessful either
if it is success then technical system name will be in sld
to restart sld --> /sld --> administration --> stop server --> restart server
or check in VA --> SLD data supplier value --> Runtime
I checked this and i do not see aa problem. you have configuration status as valid and send reult as Success
Services file is locted on OS level of R3 system--> Goto --> Start --> Run -> (type)Drivers(enter) --> etc -> (here is services file)
check ur r/3 server entry is there or not,
I have the followng in the service file for the server
sapmsDMI 3610/tcp
if not add it

Hi Experts,
when ilook at the remote gateway properties in SMGW this is what i see on the R/3 server. ive looked at my other system which i can connect to and there isnt much of a difference in the parameters. How can test this to see if it works?
                                                                                Details of remote gateway
entry                         = 0
state                         = CONNECTED
local                         = 1
system type                   = REMOTE_GATEWAY
client                        = FALSE
wait for frag write           = 0
suspended                     = 0
read/write socket             = 4
HANDLE                        = 4
TIME                          = Sun Oct 19 18:54:14 2008
SOCKET                        = 1352
STAT                          = NI_CONNECTED
TYPE                          = STREAM IPv4
OUT                           = 48225 messages 48225 bytes
IN                            = 1 messages 64 bytes
LOCAL                         = 127.0.0.1:3310
REMOTE                        = 127.0.0.1:1297
OPTIONS                       =
connect                       = Sun Oct 19 18:52:17 2008
last request                  = Thu Jan 29 13:09:58 2009
conversation no               = 0
thanks and regards,
dilanke

Problem arose when transfered music from desktop to ipod to new laptop

Please can someone help with my itunes library, this all began when i purchased a new lap top and transfered music files onto my ipod from my old computer(which i have done before and had great succsess). Now the problem began when i synced my ipod to new computer when certain files doubled and some did not. This happened with certain copied and original c.d's but not others ???
Meanwhile somehow, how it happened i do not know when i connected my ipod to old itunes library i lost all of my original files and blanked out my ipod ???
So what i have now is some duplicate albums and 4442 songs when there should be about 3100, how do i rid myself of these duplicates without doing it manually.
My computer knowledge is somewhat limited so please could i have a response in laymans terms thanx.
Also i can not seem to find my itunes folder which contains 20gb of stuff on my computer only a small portion of it is visible, and another thing as i have lost my old itunes file i suppose i have lost my playlists for good ?
Thank you for any help submitted.
Way.

anyone???

Oracle 10g R2 RAC - IP address Change

We succsessfully installed Oracle 10gR2 single database on two node RAC on Windows 2003. I followed the Oracle RAC installation documentation and assigned a public IP for the machine and another Virtual Public IP and a Private IP. We have also changed the "hosts" file in Windows to reflect the above mentioned confiuration. Here is a snippet of the "hosts" file in Windows.
xxx.xxx.xx.xxx NODE1
xxx.xxx.xx.xxx NODE1-VIP
192.168.1.161 NODE1-PRIV
xxx.xxx.xx.xxx NODE2
xxx.xxx.xx.xxx NODE2-VIP
192.168.1.161 NODE2-PRIV
After succsessful installation and testing for a few days, we are in a situation where we need to chanage the public IP's for NODE1-VIP and NODE2-VIP. If I change the IP's in the "hosts" file for NODE1-VIP and NODE2-VIP and restart the computer, both the nodes are not starting up and it comes back with a windows error. But If I change back to the old IP's, it works absolutely fine. How can we change the Virtual IP's associated for each node after a successful RAC installation?
Thanks.

Hi,
The VIP are registered as a highly available resource within the Oracle Cluster Registry (OCR).
If you want to use different VIP's than the previously configured you need this Metalink Note: 271121.1 - How to change VIP and VIP/Hostname in 10g
Be aware of the following bug: 4500688 - THE INTERFACE NAME SHOULD BE SPECIFY WHEN EXECUTING 'SRVCTL MODIFY NODEAPPS' that is not described in the mentioned Metalink note above. This means that it is better idea to modify the VIPs by explicitly specifying the network interface name, for instance: srvctl modify nodeapps -n mynode1 -A 100.200.300.40/255.255.255.0/eth0
Best Regards,
Radoslav Rusinov
http://dba-blog.blogspot.com

Succsess!!!

Similar Messages

Maybe you are looking for