Sudden extreme slow performance

I have run Tiger on this machine for about 6 months with no problems. In the last few weeks everything has started slowing down noticably. The hard disk is running ragged, constantly reading/writing, from looking at the cpu monitor it seems like the computer is not actually using it's ram and is just reading and writing. I tried clearing caches and that worked for a few hours but the machine now seems to lock up after a few hours use. I get to the point where i cannot open menus, switch programs, or even force quit or restart. Everything locks up - spinning beachball - and the hard disk is left constantly writing. I have 9 -15Gb free out of 40Gb on the disk - i assume this is enough. Playing music and safari is no problem. But I am using iphoto and photoshop as well as other programs in the background. This was never previously a problem and ran smoothly. I know it's fairly vague but if anyone can help..

Hi, Ben.
Thanks. However, it would help to see some of the specific data points from the instructions in those FAQs. Specifically:
1. You wrote: "(the pageins/outs are about equal) but i'm getting REALLY slow performance across the board. "It still sounds like it is "thrashing."1.1. Did you check the pagesin/pageouts per second as described in my "Problems from insufficient RAM and free hard disk space" FAQ? The per-second values can only be found using top as described therein.
1.2. Did you check for a runaway process in Activity Monitor per the "Troubleshooting" section in my "Tuning Mac OS X Performance" FAQ?.
The activity you describe (beach ball, heavy disk writing) has to be coming from somewhere, so checking Activity Monitor as I describe in that FAQ should tell you. Find the process consuming the most %CPU as instructed in the FAQ. Post back the result, i.e. the process name.2. You wrote: "It seems to lock itself up with the hard disk clicking and crunching. Is it possible the hard disk is giving up and so is writing at a very slow speed??? "To check this, see my "Resolving Disk, Permission, and Cache Corruption" FAQ:2.1. Perform at least Steps 1-3 of the Procedure section therein in the order specified.
2.2. Also, review the section therein on "Bad Sectors" to see if the "clicking and crunching" sounds you are hearing are similar to those that generally indicate bad sectors.3. If the disk checks out OK per point 2 above, and depending on what you find in point 1.2 above, the process may be an errant Startup or Login Item. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

Extremely slow performance with Radeon HD 7870

Hi,
I am using a number of Adobe programs on my new Windows 8 64 bit system, with 16 gigs of ram, an Intel Core i5 2.67ghz, and AMD Radeon HD 7870 2 gig. All the programs (including After Effects and Illustrator) work very well with the exception of Photoshop CS6 64 bit, which has extremely slow performance with Use Graphics Processor enabled in my preferences (which Photoshop selects by default). If I turn off Use Graphics Processor, the slow performance vanishes. If I change Drawing Mode to Basic, there might be a slightly detectable improvement over Normal and Advanced, but it's still horribly slow. The refresh rate seems to be just a few frames per second. Everything is slow: brushes, zooming, panning, everything.
I've tried changing the settings I've seen suggested elsewhere: I switched Cache levels to 2, history states to 10, and tile size to 128k. No effect. Photoshop is currently at the default of using 60% of available ram. Efficiency has remained at 100% throughout all my tests. Also, this slow performance has affected me from the moment I installed Photoshop; it didn't crop up after previous good performance. The problem exists regardless of the size or number of documents I have open. Performance is still terrible even when I create a 500 x 500 pixel blank new canvas and try a simple task like drawing with the brush.
Photoshop is fully up to date, and so are my graphics drivers (Catalyst version 13.1). Any help would be greatly appreciated; at the moment performance is so bad in Photoshop that it's unusable with graphics acceleration enabled. Thanks in advance for replying.
Photoshop System Info:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2665 MHz
Built-in memory: 16379 MB
Free memory: 13443 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 2
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 AMD-APP (1084.4)
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: AMD Radeon HD 7800 Series
Driver Version:
Driver Date:
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
Video Card Number: 1
Video Card: Microsoft Basic Render Driver
Driver Version: 9.12.0.0
Driver Date: 20121219000000.000000-000
Video Card Driver:
Video Mode:
Video Card Caption: Microsoft Basic Render Driver
Video Card Memory: 0 MB
Serial number: 90970078453021833509
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\RAFFAE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.5G, 534.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/09/10-12:31:21   5.0.4   79.517869
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1686
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.0.20577   2.1.0.20577
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1681
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
Required plug-ins:
   3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   Angled Strokes 13.0
   Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.3
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Embed Watermark 4.0
   Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Extrude 13.0
   FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mezzotint 13.0
   Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Pinch 13.0
   Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.1.2
   Shear 13.0
   Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Sumi-e 13.0
   Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Wind 13.0
   Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   DAZ Studio 3D Bridge 12.0
   DazUpdateScene 12.0
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Great news!
I followed your suggestion, Noel, and uninstalled my drivers with the Catalyst Uninstall Utility (which I hadn't used before), rebooted, reinstalled Catalyst 13.2 Beta 7, rebooted, deleted the PS Prefs, started PS, and now the performance is radically improved!
It baffles me why I would need to do a clean driver uninstall in a new system environment that has only ever had this video card, and is only a few months old, but that action seems to be what's improved the situation. Note that because I deleted the PS preferences, the good performance now occurs with the default Use Graphics Processor enabled, and Drawing Mode set to Advanced (with every feature in the Advanced dialog checked except 30bit display).
Having no reference point, I can't tell for sure if performance is as good as it theoretically ought to be for my system specs, but using the standard 13px brush is only slightly laggy behind the cursor, even if I become reckless and squiggle on the canvas violently. It wasn't just sluggish response before: Photoshop seemed to be in pain trying to draw the line segments as it laboured to catch up to the cursor. That is pretty much gone now.
Much more tellingly, zooming and panning the canvas is like it ought to be, responsive and clean, more or less like it was for me in CS4 with my old Nvidia 9600GT. The poor performance with zooming and panning was the most worrying aspect of the issue. It's a great relief to see these working more properly now.
I have to confess I'm a little embarrassed to have drug you through all this hassle only to discover that something as rudimentary as properly cleaning out the drivers would be the apparent solution. I never would have imagined that doing that, with such a new and stable system, would make any difference, since I don't have a legacy of older drivers dotting my hard drive. In any event, I'm really grateful that you guys took the time to try to help me.
In the interest of completeness, here's the relevant portion of my system info after doing the reinstall steps I mentioned above:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2665 MHz
Built-in memory: 16379 MB
Free memory: 13680 MB
Memory available to Photoshop: 14695 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 3.0
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: AMD Radeon HD 7800 Series
Driver Version:
Driver Date:
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
Video Card Number: 1
Video Card: Microsoft Basic Render Driver
Driver Version: 12.100.17.0
Driver Date: 20130226000000.000000-000
Video Card Driver:
Video Mode:
Video Card Caption: Microsoft Basic Render Driver
Video Card Memory: 0 MB
As you can see, the Microsoft Basic Render Driver still appears as a Video Card in the list. This presumably has something to do with Windows 8, and I really don't know if its presence here is still a sign that my card is not being used to its optimal capability. I have a hunch that the slight lag that I am still experiencing with the brush when Use Graphics Processor is on -- totally absent with the acceleration turned off -- implies that Photoshop is still unable to take maximum advantage of my card. I would assume that the brush tool should be more responsive with acceleration on than off, in a rig without any issues, but that's just assumption on my part. If you turn off Use Graphics Processor on your systems, is the brush tool more or less responsive?
But again, panning the canvas with the hand tool is now extremely responsive, without any screen tearing or visible lag, and that's a massive improvement over the total meltdown of performance I was suffering from before.
Thanks again very much for your help. I'm grateful to all of you who took the time to chime in.

Airport Express and USB Hard drive and extremely slow performance

HI Guys,
I seem to having a lot of trouble with an Airport express and a Lacie 1TB drive. While I have solved several problems by updating firmware and enabling journalling on the Lacie, I am still having problems with extremely slow performance with my macbook, particularly using itunes and Firefox.
Any ideas and any further information needed?
Regards
BJDprivate

BjdPrivate wrote:
HI,
I formatted it using the Lacie setup program for Mac and later enabled it for journalling using Disk utility. This seemed to solve a lot of the recognition problems I was having, however the I-Tunes and firefox performance is still atrocious. If I do Need to completely reformat it using Disk Utility, will I lose my files on the disk now?
not if you move them to a temporary location before you start.
yes, you are better of formatting the drive with DU.

Extremely slow performance on projects under version control using RoboHelp 11, PushOk, Tortoise SVN repository

We are also experiencing extremely slow performance for RoboHelp projects under version control. We are using RoboHelp 11, PushOk and a Tortoise SVN repository on a Linux server. We are using a Linux server on our IT guys advice because we found SVN version control under Windows was unstable.
When placing a Robohelp project under version control, and yes the project is on my local machine, it can take up to two hours to complete. We are using the RoboHelp sample projects to test.
We have tried to put the project under version control from Robohelp, and also tried first putting the project under version control from Tortoise SVN, and then trying to open the project from version control in Robohelp. In both cases, the project takes a ridiculous amount of time to open. The Robohelp status bar displays Querying Version Control Status for about an hour before it starts to download from the repository, which then takes more than an hour to complete. In many cases Robohelp becomes unresponsive and we have to start the whole process again.
If adding the project to source control completes successfully, and the the project is opened from version control, performing any function also takes a very long time, such as creating a topic. When I generated a printed documentation layout it took an astonishing 218 minutes and 17 seconds to complete. Interestingly, when I generated the printed documentation layout again, it took 1 min and 34 seconds. However when I closed the project, opened from version control, and tried to generate a printed documentation layout, it again took several hours to complete. The IT guys are at a loss, and say it is not a network issue and I am starting to agree that this is a RoboHelp issue.
I see there are a few other discussions here related to this kind of poor performance, none of which seem to been answered satisfactorily. For example:
Why does it take so long when adding a new topic in RH10 with PushOK SVN
Does anybody have any ideas on what we can do or what we can investigate? I know that there are options for version control, but am reluctant to pursue them until I am satisfied that our current issues cannot be resolved.
Thanks Mark

Do other applications work fine with the source control repository? The reason I'm asking is because you must first rule out that there are external factors causing this behaviour. It seems that your it guys have already looked at it, but it's better to be safe than sorry.
I have used both VSS and TFS and I haven't encountered such a performance issue. I would suggest filing it as a bug if you rule out that the problem is not related to external influences: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Kind regards,
Willam

My macbook is experiencing an extremely slow performance. Everytime I try to do something, the screen will freeze and the pinwheel symbol would appear. How do I pix this?

My macbook is experiencing an extremely slow performance. Everytime i try to do something, the pinwheel symbol will pop up. I do not have an antivirus software until recently, which I got free from school and it said my mac has a virus, which has been quaratined. Unfortunately the problem still persist. Help?

kasturi pryanka,
your current slow performance might have been caused by installing that antivirus software. Have you tried disabling it, to see if that make a difference with its performance?

My iMac with Comcast is suddenly extremely slow

Suddenly my imac with comcast internet with apple airport is extremly slow.
This sort of came out of the blue.
I have called Comcast and they said everything on their end seems to check out fine.
Going a bit nuts here. Any ideas as to why this is happening?
Anything I should test?
Doug

Nothing seems to have changed at all Allen.
Still taking *forever* to download images, pages, etc.
Here is the new report:
Hardware Information:
          iMac (24-inch, Early 2008)
          iMac - model: iMac8,1
          1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 8800 GS - VRAM: 512 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:56:41
Disk Information:
          ST3500418AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (415.73 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Iomega External HD 1 TB
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    Media (disk1s2) /Volumes/Media: 999.86 GB (626.31 GB free)
          Hewlett-Packard HP Color LaserJet CP1518ni
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Mitsumi Electric Apple Optical USB Mouse
                    Apple Inc. Apple Keyboard
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.logmein.driver.LogMeInSoundDriver          (1.0.3 - SDK 10.5)
          net.telestream.driver.TelestreamAudio          (1.0.5 - SDK 10.6)
Startup Items:
          ColdFusion10: Path: /Library/StartupItems/ColdFusion10
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.barebones.authd.plist 3rd-Party support link
          [System] com.barebones.textwrangler.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.logmein.logmeinblanker.plist 3rd-Party support link
          [System] com.logmein.logmeinserver.plist 3rd-Party support link
          [System] com.logmein.raupdate.plist 3rd-Party support link
          [System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.amazon.sendtokindle.launcher.plist 3rd-Party support link
          [System] com.flipvideo.FlipShare.AutoRun.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.logmein.logmeingui.plist 3rd-Party support link
          [System] com.logmein.logmeinguiagent.plist 3rd-Party support link
          [System] com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
          [System] com.wacom.pentablet.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac.helperTool.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
          [not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          EvernoteHelper
          Skype
          Dropbox
          BitTorrent
          Google Drive
          AdobeResourceSynchronizer
          EvernoteHelper
          BambooCore
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          WacomNetscape: Version: 1.1.1-1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
          WacomSafari: Version: 1.1.1-1 3rd-Party support link
          AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 3rd-Party support link
          LogMeIn: Version: 1.0.935 - SDK 10.7 3rd-Party support link
          Flash Player: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
          LogMeInSafari32: Version: 1.0.935 - SDK 10.7 3rd-Party support link
          googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          AdobePDFViewer: Version: 11.0.04 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Searchme: Version: 1.3
          1Password: Version: 3.9.20
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
          WebEx: Version: 1.0 3rd-Party support link
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 3rd-Party support link
          Picasa: Version: 1.0 3rd-Party support link
          RealPlayer Plugin: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
          3ivx MPEG-4 3rd-Party support link
          PenTablet 3rd-Party support link
          DC30 Xact Driver Panel 3rd-Party support link
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Growl 3rd-Party support link
          Pastebot Sync 3rd-Party support link
          Perian 3rd-Party support link
          TextExpander 3rd-Party support link
Old Applications:
          Transmit:          Version: 4.2 - SDK 10.5 3rd-Party support link
          Corel Painter Lite:          Version: 1.0.821 - SDK 10.5 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Users/[redacted]/Library/Application Support/WebEx Folder/1224
                    convertpdf:          Version: 1.2 - SDK 10.5 3rd-Party support link
                    Cisco WebEx Meeting Center:          Version: 1207.04.2732.10 - SDK 10.5 3rd-Party support link
                    asannotation2:          Version: 8.25.31.0 - SDK 10.5 3rd-Party support link
                    atmsupload:          Version: 4.14.29.0 - SDK 10.5 3rd-Party support link
Time Machine:
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 77.79 GB
          Destinations:
                    Media [Local] (Last used)
                    Total size: 931.19 GB
                    Total number of backups: 173
                    Oldest backup: 2010-10-10 13:20:12 +0000
                    Last backup: 2014-04-22 16:27:56 +0000
                    Size of backup disk: Adequate
                              Backup size 931.19 GB > (Disk used 77.79 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               5%          WindowServer
               1%          EtreCheck
               1%          Google Chrome
               1%          Activity Monitor
               1%          launchservicesd
Top Processes by Memory:
          156 MB          com.apple.IconServicesAgent
          143 MB          mds_stores
          119 MB          WindowServer
          102 MB          Adobe Photoshop Elements
          102 MB          Skype
Virtual Memory Information:
          1.24 GB          Free RAM
          1.56 GB          Active RAM
          678 MB          Inactive RAM
          557 MB          Wired RAM
          579 MB          Page-ins
          0 B          Page-outs

Extremely slow performance transferring data over USB with Time Capsule

I have the 2TB wireless Time Capsule. I have it setup as an extension to my current WiFi at home, since I already had a WLAN router. I have an external harddrive (500gig) that I connected to my Time Capsule because I wanted to transfer data from the Time Capsule to the external HD. The external HD is formatted with FAT32 file system, so read/write is no problem.
When, using my MacBook Pro, I navigated to the Time Capsule and dragged files over to the connected USB harddrive (connected directly in the Time Capsule), the performance to transfer is extremely SLOW! It was slower than doing the transfer completely wirelessly (USB drive connected to laptop and transfer wirelessly from TC)!
I do not understand this at all! It should be a simple transfer using the USB connection! When I do a transfer from my laptop directly to the USB harddrive, with it connected directly to the laptop, the transfers are super fast!
What happened? Can someone please explain this or tell me what I need to do?
Thank you!

I am still confused here.
My original question was regarding the use of my USB external harddrive. It was connected to the back of the TC. The TC was wirelessly speaking to my WLAN router. Using my laptop (also wirelessly speaking to WLAN router), I navigated to the TC and saw 2 listings - one for the data on the harddrive in the TC and one for the new external USB drive connected to the back of the TC. I wanted to transfer data from the harddrive in the TC to the USB external drive. Based on what I expected, I thought the transfer rate would merely be limited by the USB 2.0 interface that is being used by the external drive. However, I was definitely wrong! The transfer rate (shown by the estimate in time to transfer the data by my MacBook Pro) was doubled to 14 hrs.
Originally, it was only 7 hrs when the USB external drive is connected directly to my laptop and I connect to the TC wirelessly. Weird!
So why doesn't the TC simply transfer the data from its internal harddrive to the external USB drive directly without using any wireless technology?
The second question I have is regarding the setup of the TC itself. I have a NetGear WLAN router and its an "n" router. So the speed is good. I have my TC currently downstairs from the WLAN router. Therefore the TC is setup as simply a wireless harddrive. It speaks through the WLAN router in order to be available to all my laptops in my house. My question is whether it should instead be directly connected to the WLAN router using an ethernet cable? Would this improve my overall transfer rates to/from the TC?
Thanks so much.

USB connection suddenly extremely slow

As I ususally have manny film, series on my external hard drive connected to my Airport Extreeme, I suddenly got a big supprise when the speed suddenly got extremely slow. Not possible to use it for anything. The internet connection is however perfect.
As it has allways functioned perfectly for me I don´t know what to do. It was about that time I uppdated the Java pack resently submitted by Apple. But I can´t see why this should have aything to do with this.
Has anyone had any simmilar problems, and what is the remedy. I am all blank....

Keep in mind that the very first device you connect will determine the default speed for the entire USB bus. So, if you boot up the MBP, log in, and plug in a USB2 device, then the bus will never operate faster than USB2. You would then need to reboot the computer, and first connect the USB3 device to ensure the bus steps up to USB3 speeds for USB3 devices.
Also, make sure you are using a USB3 compatible cable with any USB3 devices to get max. transfer speeds.
see http://support.apple.com/kb/HT5172

Sudden EXTREME slowness, crashing

I was using my Macbook Pro today for just regular stuff, playing some music, when suddenly it slowed down to a really ridiculous speed. I double-clicked on a song in iTunes, it went to the pinwheel and took 15 seconds before the song played. I figured I would restart, so I did and now the computer is literally slower than I could have imagined.
At first reboot it sat at the Apple logo loading screen for a long time, to the point where I turned it off and let it sit for a moment, then turned it back on. For the next five or so off / on cycles it displayed a blank light-blue screen and nothing else, not responding to any kind of input. Holding down the button to get to the boot menu to choose between Windows and Mac didn't work.
Finally I left it for quite a long time and it managed to boot up to the login screen after about 30 minutes of loading. I managed to type in my password (which took awhile, it went to pinwheel for about 10 seconds before recognizing keyboard inputs). Another 10 - 15 minutes before it displayed the desktop and dock, then another 5 minutes before it displayed the top menu.
It continued to run extremely slow, and over the course of the next hour I managed to open up Disk Utility and Activity Monitor. Activity Monitor shows random tasks as "Not Responding", as does Force Quit. Different tasks at different times show up red, including SystemUI, iTunes, and Disk Utility itself.
I attempted to verify the disk, it worked for a moment, displayed a few errors and then stopped with the message "Underlying task failed", or something to that effect. I tried to Verify Disk permissions and it threw a long list back at me before freezing. Over the next 20 minutes I managed to force quit Disk Utility, and now my computer is apparently entirely frozen.
The Windows drive also didn't appear on the desktop, and under Disk Utility my windows partition showed up greyed out and d03 or something like that.
I'm going to try to restart with the install disk and run Disk Repair off of it and see if it will work, but I was hoping someone out there had an idea of what's gone wrong with my MBP before I just wipe the whole thing clean and start over...if I can.
It's a Macbook Pro, one of the first-iteration Macbook Pros that came out a few years ago.
Thanks a bunch.

Thanks for the quick reply. I tried restarting with the install disk, but it failed to repair with the same error. I'm going to have to send it in now anyway because the install disk is now stuck in there. Hopefully (with my luck) it won't spontaneously explode before I can get it to an Apple Store to have them send it back, I guess.
Thanks.

Lightroom 4 suddenly extremely slow after download free trial of Lr5

Hi I have Lightroom 4 and last night I downloaded Lightroom 5 with a free trial for 30 days, but I couldn't work on that because was very slow, so I uninsalled Lr5, but now I can't work in my Lr4, it is extremely slow and it was perfect before. I have a MacBook Pro OS x Lion 10.75, 2.8 Ghz Intel Core i7, storage of 591GB free out of 749 and I have all my photos in an external drive "my passport" with 737 GB free out of 999 GB. Could you please help me??? I am very upset and desperate, I have been trying to work for 6 hours already, something that will take me only 30 minutes, and I can't even finish it. Please help me!! Thank you.

Get rid of Trusteer. It doesn’t work well under Mac OS.
Trusteer Rapport Uninstall
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

T42 hangs, extremely slow performance

Hello,
I can boot up my T42, but it works very slowly. In safe mode with networking, it works great. I have automatic updates turned on, but it cannot successfully download updates. It still has service pack 2. Not sure if that's related to slow performance.

Hello,
I can boot up my T42, but it works very slowly. In safe mode with networking, it works great. I have automatic updates turned on, but it cannot successfully download updates. It still has service pack 2. Not sure if that's related to slow performance.

Extremely slow performance with NEW hdd

Ok guys, this is pretty frustrating. Today I bought 2 new external hdd's, same manufacturer, same model. One of them seems to work great, but the other one.. well look at this:
/dev/sdk1:
Timing buffered disk reads: 96 MB in 3.04 seconds = 31.53 MB/sec
bash-3.2# hdparm -t /dev/sdj1
/dev/sdj1:
Timing buffered disk reads: 4 MB in 4.30 seconds = 951.52 kB/sec
As you can see, my sdj is extremely slow - what could possibly be wrong here?

fukawi2 wrote:Is DMA enabled in the BIOS?
Probably - If it wasn't the other drive shouldnt behave like normal.
By the way:
bash-3.2# dmesg | grep -i ata.*dma
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata1.00: configured for UDMA/133
ata2.00: ATA-7: ST3320820AS, 3.AAD, max UDMA/133
ata2.00: configured for UDMA/133
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
ata3.00: configured for UDMA/133
bash-3.2#

Extremely slow performance with ojdbc6.jar on IBM JVMs (Java 6)

We are consistently seeing slow performance (easily demonstrable by the simplest of test cases) while using ojdbc6.jar on IBM JDKs. Pefrormance is normal when we simply opt for ojdbc14.jar under the same JDK, same java program.
Works well
=======
JRockit, ojdbc6.jar
JRockit, ojdbc14.jar
IBM JDK, ojdbc14.jar
A lot slower
=======
IBM JDK, ojdbc6.jar
All we had to do was to write a simple JDBC access program and measure time taken around
Connection conn = DriverManager.getConnection(jdbcURL, dbProps);
The first 3 combinations mentioned above return comparable numbers. The 4th combination takes 3-4 times as much.
We initially saw this during performance test of our software on WebSphere (also supported on Weblogic). Later was able to eliminate WebSphere and Weblogic as the problem areas and narrow it down to the JVM. Reproduce-able on development machines.
We have been using Oracle/WLS since BEA used to market 'Tengah' servers. This is the worst we have seen as far as the qaulity of support staff goes. We first level support seems clueless. We filed this case and the support comes back tells us that IBM JDKs are not supported for WLS! Oh, we have been running WLS/AIX/IBM JVM combination only for 5+ years.

A quick solution to test this would be to do the following:
mv /dev/random /dev/random.bk
ln /dev/urandom /dev/random
Note: The quick solution will disappear after a reboot. You could add it to rc.local to automatically make this change, but I wouldn't recommend it.
The following is from [http://www.usn-it.de/index.php/2009/02/20/oracle-11g-jdbc-driver-hangs-blocked-by-devrandom-entropy-pool-empty/]:
"Oracle 11g JDBC driver hangs blocked by /dev/random – entropy pool empty
On a headless (=without console) network server, the 11g JDBC driver used for (java) application connect may cause trouble. In my case, it refused to connect to the DB without any error, trace or log entry. It simply hung. After several hours, it connected one time, and freezed again. Remote debugging done by the development clarified that it locks after calling SeedGenerator() and SecureRandom().
Reason: The JDBC 11g needs about 40 bytes of secure random numbers, gathered from /dev/random, to encrypt its connect string.
But public-available “man 4 random” says:
When read, the /dev/random device will only return random bytes within the estimated number of bits of noise in the entropy pool. /dev/random should be suitable for uses that need very high quality randomness such as one-time pad or key generation. When the entropy pool is empty, reads from /dev/random will block until additional environmental noise is gathered.
So far so good, now the question arises: Why does this mystic “entropy pool” runs out of gas?
The answer is as simple as unsatisfying: because too less entropy “noise” was generated by the system. You can check the “filling level” (maybe zero?) of your pool and the overall size of the pool (usually 4096) by issuing
cat /proc/sys/kernel/random/entropy_avail
cat /proc/sys/kernel/random/poolsize
Hint: /dev/random will deliver one new random number as soon as the pool has reached more than 64 entropy units.
So why does my box not generate more entropy noise?
Because only few drivers will fill the entropy pool, first of all keyboard and mouse. Sounds very useful on a server in a datacenter, isn’t it? Some block device and network drivers seem to do so as well, and I have read from guys on the net changing their network card and driver to enjoy this “feature”! But let’s stop ranting, /dev/random is simply made for high security randomness, and if it can’t make sure that randomness is as good as possible in this deterministic world, it stops. Intelligent people have created /dev/urandom for that, like “man 4 random” clearly states:
A read from the /dev/urandom device will not block waiting for more entropy. As a result, if there is not sufficient entropy in the entropy pool, the returned values are theoretically vulnerable to a cryptographic attack on the algorithms used by the driver. Knowledge of how to do this is not available in the current non-classified literature, but it is theoretically possible that such an attack may exist. If this is a concern in your application, use /dev/random instead.
Now let’s get back on our JDBC problem. Oracle JDBC 11g seems to use /dev/random by default, which causes usually no trouble on clients running with console access by a user, because his/her unpredictable :) actions will keep the entropy pool well-fed. But to make it usable on a headless server with a latently empty entropy pool, you should do several things, in descending security order (without warranty):
1. Involve an audio entroy daemon like AED to gather noise from your datacenter with an open microphone, maybe combine it with a webcam noise collector like VED. Other sources are talking about “Cryptographic Randomness from Air Turbulence in Disk devices“. :)
2. Use the Entropy Gathering Daemon to collect weaker entropy from randomness of userspace programs.
3. Talk your JDBC into using /dev/urandom instead:
-Djava.security.egd=file:///dev/urandom"

Adobe premiere cs6 suddenly EXTREMELY slow and CPU intensive

Hi everyone,
I'm editing candon 5d mk III footage (h.264 files) on my late 2011 MacBook pro. Here are the specs..
240 gig SanDisk SSD harddrive (190 gigs free)
500 Gig (250 gigs free)
8 gigs ram
2.4 ghz i5 processor
Intel HD graphics 3000 graphics card
I'm a wedding videographer and I am currently closing my last edits of the season. I have edited 20+ 45 minute videos on Adobe Premiere CS6 and have had absolutely no issues at all. I enjoy working on premiere so much that I've been trying to get my videographer friends to give a shot and simplify their workflows.
Upon starting my second to last edit (same process as the other 18 videos I've done this season, organizing the footage within it's respective folder, loading it into premiere with the couples' choice in music and opening 4-5 new sequences based on the events of the day) I noticed that I was having a lot of trouble importing folders into my media bin. I had to import all of the footage unorganized because loading the folders "Preperation, Ceremony, Photos, Reception" with the footage within them would cause premiere to freeze and become unrepsonsive. So, finding no solution I added all the footage in no particular fashion. Just one large unorganized group. Then, while organizing the files into bins, I noticed even the smallest move would take several minutes to complete. Because I was working directly off of my hard drive I figured these kinds of delays would eventually catch up to me, so I moved all of my files to my HDD and decided to work on them there. The project itself continued to be extremely slow and started crashing regularly (especially when applying audio effects). After a few hours, I stopped being able to play 1080p video at all. It would jam and stutter so often it become unuseable. 720p video was the next to go along with my ability to render anything in less than 30 minutes - 1 hour. At last attempt to use premiere I was getting an "Unable to compile movie - Unknown Error" message when trying to render alpha channel things (lower third titles and things of the nature), my ability to change the resolution of the playback had disappeared (Going from full, 1/2 and 1/4 did nothing, it just remained at full quality) and finally doing anything in premiere caused it to use 300% of my CPU (based off of my Activity Monitors metering).
Does anybody have any clue as to what could be happening to my machine/program? I have a yearly subscription to adobe's creative cloud service if that helps. Oh and I've tried moving my media cache's from my HDD to my SDD with little or no results. Don't know if that helps.
Thank you to anyone who helps in advance. What I believe to be clean installs aren't doing anything so I'm hoping somebody can give me a hand.

Sounds to me like specific media is dragging the Mac to a halt. (300%, really Apple? Isn't that like saying that my car can go up to 90mph, but last night I drove it at 300% speed, 270mph)
Some things to trouble shoot:
Do you have any assets in the project that are loaded directly from strange devices, like a SD card or CD audio? Any dynamic link media that may be problematic?
Is there anything that makes this footage different than footage from successful projects?
Can you work successfully with an old project?
Can you successfully start a new project using different or less media?
Is the 500 GB drive internal or external?
One time I was sent out at from work to troubleshoot a system that would freeze up like yours. The guy was an idiot and rude client that demanded that someone from our facility help him fix his own project. He said that he had been troubleshooting for a day, and then had convinced his organization's IT guy that he needed a way over spec new pc to run Premiere.
His system was fine. Within 3 minutes of checking media in his project, I saw that top track of the problem sequence had a video clip that was set to a speed of .01%, and he had the clip stretched for 24hours in the sequence. His project was supposed to be a 2 minute PSA. All his issues went away after removing the idiotic Day Long slow motion clip. He complained to my boss because I had laughed at him.
I relate that story to illustrate that it could be a weird thing with you media or fx, just as well as a hardware or software issue.
Good Luck

Computer suddenly extremely slow. Now grey screen.

Macbook Pro, OS X 10.6.8, purchased late 2009
Almost overnight, the computer became extremely slow when running apps. I tried multiple solutions -- verifying, repairing, etc. Yet as of now, its refusing to boot. Is there a way of restoring the system through time machine on an external HD on Mountain Lion? Does anyone strongly suspect (as I do) that this is the last gasp for the hard drive and a new one is in order? Or is the situation perhaps even more critical given the age of the machine?

It booted just now after many attempts, but is still extremely slow and unresponsive.
Once again, please: any help with the matter would be immensely appreciated. Would putting in a new hard drive solve the issue? I read somewhere that moving your computer when it's running can cause the drive to get corrupted. And in fact, that is more-or-less when my problems began.
Or should i try restoring the computer first through the OS X DVD?

Sudden extreme slow performance

Similar Messages

Maybe you are looking for