Sudden hotsync "device database version is incompatible" error

I have a Sprint Treo 755p with software version 1.07. Desktop is 4.1.4.
Hotsync has been working fine for 6 months. Suddenly yesterday I started getting "The device database version is incompatible with this conduit. Doing nothing" in my hotsync log (see below for log result) . Contacts are synchronizing, memos have disappeared, and calendar is not synchronizing. After attempting to synchronize the 755p soft resets. It also soft resets when I do a string search and while it is searching the calendar. This may have all started yesterday when I sent a text message. The message went then the phone froze. I haven't had any freeze-ups with this phone so I was surprised. I popped the battery, but after restart my text message history was gone.
Did something get corrupted? I'd appreciate any advice.
OK Quick Install
VersaMail
- Sync configured to Do Nothing
-- Memos
- The device database version is incompatible with this conduit. Doing nothing.
OK Calendar
OK Contacts
OK Tasks
-- Backing up AddressingLibRecent-HsCh to C:\Program Files\palmOne\DJ\Backup\AddressingLibRecent-HsCh.PDB
Thanks
John

Never mind. I deleted the following files Memodb and MemoDB-Pmem, hot sync'd and now I am able to get Memos to open.  Guess I had something in the database that didn't jive.
Post relates to: Treo 680 (Unlocked GSM)

Similar Messages

  • BIB-16633 Cannot connect because the database version is incompatible with

    BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
    Reply
    why is this?
    oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
    at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
    at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
    at oracle.dss.connection.client.Connection.connect(Connection.java:425)
    at oracle.dss.connection.client.Connection.connect(Connection.java:342)
    at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at java.awt.Component.show(Component.java:1133)
    at java.awt.Component.setVisible(Component.java:1088)
    at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
    at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
    at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
    at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
    at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
    at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
    at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Lisa Sherriff
    Posts: 137
    OTN Member Since: Jan, 2001
    Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
    Reply
    Hi,
    From the 10.1.2 BI Beans Install Guide it says:
    OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
    * Oracle9i Release 2 Enterprise Edition, as follows:
    o 9.2.0.6 for all platforms.
    o 9.2.0.5 with the latest OLAP patch for Windows-only.
    * Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
    From the error message it would appear that the Database is not one of the above.
    Thanks,
    Lisa
    JDev QA
    401488
    Posts: 48
    OTN Member Since: Aug, 2002
    Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
    Reply
    Hi,
    Please note that we have follwing versions of DB up and running:-
    1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
    With the Partitioning and Real Application Clusters options
    JServer Release 9.2.0.5.0 - Production
    Pls let us know the solution to resolve this problem ASAP.
    Thanks.

    You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
    10g - 10.1.0.3 with additional OLAP patch
    9i - 9205 with additional OLAP patch
    9i - 9206
    I would suggest that you have not applied all the required database patches to your instance.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oraclc Corporation

  • Happily used Firefox for 2 years, suddenly it won't open - getting this error message: "Platform Version incompatible with minversion =1.9.1.11 maxversion =1.9.1.11" What can I do?

    Before this happened, I was having a problem for about a month where Firefox wouldn't close. I'd close the browser window, and later when I tried to reopen it to connect to the Internet, I 'd get a msg saying that Firefox is already running, and I must close the current window before opening a new one. I'd have to restart my computer at this point.
    I don't know if this is related to why I can no longer use Firefox at all.

    The "Platform version incompatible" error message can be caused by a problem with the installation of Firefox. Remove your current installation of Firefox and re-install.
    # Delete all the files and folders inside the Firefox installation directory - C:\Program Files\Mozilla Firefox\
    # Download the latest installer from [http://www.mozilla.com/en-US/ Mozilla] and install it.
    Doing the above will not remove your bookmarks, passwords etc, since they are stored in a separate folder.
    If after re-installing you get the "already running" error, see [[Firefox is already running but is not responding]].

  • UDI-00018: Data Pump client is incompatible with database version 11.2.0.1

    Hi
    I am trying to import data in Oracle 11g Release2(11.2.0.1) using impdp utitlity and getting below errror
    UDI-00018: Data Pump client is incompatible with database version 11.2.0.1.0
    Export dump has taken in database with oracle 11g Release 1(11.1.0.7.0) and I am trying to import in higher version of the database. Is there any parameter I have to set to avoid this error?

    AUTHSTATE=compat
    A__z=! LOGNAME
    CLASSPATH=/app/oracle/11.2.0/jlib:.
    HOME=/home/oracle
    LANG=C
    LC__FASTMSG=true
    LD_LIBRARY_PATH=/app/oracle/11.2.0/lib:/app/oracle/11.2.0/network/lib:.
    LIBPATH=/app/oracle/11.2.0/JDK/JRE/BIN:/app/oracle/11.2.0/jdk/jre/bin/classic:/app/oracle/11.2.0/lib32
    LOCPATH=/usr/lib/nls/loc
    LOGIN=oracle
    LOGNAME=oracle
    MAIL=/usr/spool/mail/oracle
    MAILMSG=[YOU HAVE NEW MAIL]
    NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
    NLS_DATE_FORMAT=DD-MON-RRRR HH24:MI:SS
    ODMDIR=/etc/objrepos
    ORACLE_BASE=/app/oracle
    ORACLE_HOME=/app/oracle/11.2.0
    ORACLE_SID=AMT6
    ORACLE_TERM=xterm
    ORA_NLS33=/app/oracle/11.2.0/nls/data
    PATH=/app/oracle/11.2.0/bin:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.:/usr/local/bin:/usr/ccs/bin
    PS1=nbsud01[$PWD]:($ORACLE_SID)>
    PWD=/nbsiar/nbimp
    SHELL=/usr/bin/ksh
    SHLIB_PATH=/app/oracle/11.2.0/lib:/usr/lib
    TERM=xterm
    TZ=Europe/London
    USER=oracle
    _=/usr/bin/env

  • ORA-15204: database version 11.1.0.0.0 is incompatible with diskgroup DG_FR

    I havre a 2 node cluster ...just installeled using ASM.....Database and ASM version is 11.1.0.7.0 on
    Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) 2.6.18 128.4.1.0.1.el5 (64-bit)
    Getting this error any idea ...COMPATIBLE is 11.1.0.0.0
    ARCH: Archival stopped, error occurred. Will continue retrying
    ORACLE Instance IDMPROD2 - Archival Error
    ORA-16038: log 4 sequence# 4 cannot be archived
    ORA-00254: error in archive control string ''
    ORA-00312: online log 4 thread 2: '+DG_REDO/idmprod/onlinelog/group_4.260.695076357'
    ORA-15001: diskgroup "DG_FRA" does not exist or is not mounted
    ORA-15204: database version 11.1.0.0.0 is incompatible with diskgroup DG_FRA
    Errors in file /ora00/app/oracle/diag/rdbms/idmprod/IDMPROD2/trace/IDMPROD2_arc3_31883.trc:
    ORA-16038: log 4 sequence# 4 cannot be archived
    ORA-00254: error in archive control string ''
    ORA-00312: online log 4 thread 2: '+DG_REDO/idmprod/onlinelog/group_4.260.695076357'
    ORA-15001: diskgroup "DG_FRA" does not exist or is not mounted
    ORA-15204: database version 11.1.0.0.0 is incompatible with diskgroup DG_FRA
    Mon Aug 17 00:07:05 2009
    ARCH: Archival stopped, error occurred. Will continue retrying

    Hi,
    ORA-15204: database version string is incompatible with diskgroup string
    Cause:      The database compatibility of the diskgroup was advanced to a later version.
    Action:      Upgrade the database instance to appropriate version of ORACLE.
    REgards,
    Tom

  • Java Mapping - Class versions are incompatible (linkage error)

    Hi Friends,
        While testing java mapping in Integration Repository i am getting an error - "Class versions are incompatible (linkage error)". Can anyone plz tell what might be the reason.
    Regards,
    Gowtham Kuchipudi.

    hello
    I have this message but my trace look like this:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <Trace level="1" type="B" name="interface activity determination">
      <Trace level="1" type="T">Version 000</Trace>
      <Trace level="1" type="T">Message status 000</Trace>
      <Trace level="1" type="T">Interface action INIT</Trace>
      <Trace level="1" type="T">(must be INIT for a new determination)</Trace>
      <Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
      <Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
      </Trace>
      <Trace level="1" type="E">CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV">
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Interface Mapping http://Migdal.co.il/CRM/SAP-CRM/ProposalDeatailsService ProposalDeatailsService_WS2RFC_IM</Trace>
      <Trace level="1" type="T">LinkageError at JavaMapping.load(): Could not load class: xmlpayload</Trace>
      <Trace level="1" type="T">java.lang.UnsupportedClassVersionError: xmlpayload (Unsupported major.minor version 49.0) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrun.server.mapping.MappingLoader.findClass(MappingLoader.java:158) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrun.server.mapping.JavaMapping.load(JavaMapping.java:95) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:45) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor296.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy158.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor428.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:107) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:157) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</Trace>
      <Trace level="1" type="T">Linkage error occurred when loading class xmlpayload (http://Migdal.co.il/CRM/SAP-CRM/ProposalDeatailsService, d7e31f30-53be-11dc-8fbd-ee09c0a8664d, -1)</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Linkage error occurred when loading class xmlpayload (http://Migdal.co.il/CRM/SAP-CRM/ProposalDeatailsService, d7e31f30-53be-11dc-8fbd-ee09c0a8664d, -1) at com.sap.aii.ibrun.server.mapping.JavaMapping.load(JavaMapping.java:115) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:45) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor296.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy158.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor428.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:107) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:157) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) Root Cause: java.lang.UnsupportedClassVersionError: xmlpayload (Unsupported major.minor version 49.0) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrun.server.mapping.MappingLoader.findClass(MappingLoader.java:158) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrun.server.mapping.JavaMapping.load(JavaMapping.java:95) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:45) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor296.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy158.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor428.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:107) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:157) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</Trace>
      <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
    the error that I recieve in the SXMB is:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">LINKAGE_ERROR</SAP:Code>
      <SAP:P1>xmlpayload</SAP:P1>
      <SAP:P2>http://Migdal.co.il/CRM/SAP-CRM/ProposalDeatailsS~</SAP:P2>
      <SAP:P3>d7e31f30-53be-11dc-8fbd-ee09c0a8664d</SAP:P3>
      <SAP:P4>-1</SAP:P4>
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Class versions are incompatible (linkage error)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    this is my XI information
    Runtime Environment
    Java version:1.4.2_12
    Java vendor:Sun Microsystems Inc.
    Version
    Service pack:21
    Release:30_VAL_REL
    Latest change:409678
    Sync time:200709211024
    since I already have the SP required by the note, any other suggestions?
    Thanks
    Kfir

  • XI Mapping: Class versions are incompatible (linkage error)

    Hi,
    i have a simple File-to-File scenario, and I am getting the following error as observed in the XI Monitor:
    <SAP:Category>Application</SAP:Category>
    <SAP:Code area="MAPPING">LINKAGE_ERROR</SAP:Code>
    <SAP:Stack>Class versions are incompatible (linkage error)</SAP:Stack>
    To troubleshoot the mapping, I have removed all mappings, and put the target nodes to constant values. I am still getting the error in Mapping (linkage error).
    I am using XI3.0SP0 (J2EE SP07, ABAP SP3). Is this a known problem / OSS notes available ? thanks.
    Regards,
    Manish Agarwal.

    Hallo Agarwal,
    have a look in OSS Message #755302
    Regards Franz Forsthofer

  • Class versions are incompatible (linkage error)

    Hi All,
    I New to SAP XI and i've been working on java mapping, i Used RAD 6.0 for generation of class files, i imported the generated files into Integration builder.
    but when i execute the scenario i'm getting this error
    "Class versions are incompatible (linkage error)"
    in message monitoring with a red flag..
    can anyone explain me why i'm getting this error....
    Thanks & Regards,
    Sai Kumar Madduri

    Hi,
    Our PI Details:
    Runtime Environment
    Java version: 1.5.0_14
    Java vendor:Sun Microsystems Inc.
    Version
    Service  pack:09
    Release: 645_VAL_REL
    NWDS IDE: 1.5.0_14
    XI
    Software component details
    XI TOOLS 3.0
       Support Package 11 of SAP_XITOOL, 3.0 SP011 011
    XI TOOLS 7.0
       No Entry for Support Packages.
    Request to advise what is the best option for my JAVA Dom program to run
    regards
    shekar Chandra

  • Cannot boot from Windows 8 notebook - Error: Operating system version is incompatible with Startup Repair

    Hi all,
    I have searched through forums, but could not find the solution to my problem:
    I have a notebook ASUS with Windows 8 preinstalled.
    Yesterday I was doing some housecleaning jobs with some freeware tool (don't remember the name).
    Afterwards I have not been able to boot into Windows.
    CURRENT SITUATION: When I switch the PC on, after the welcome screen of ASUS and Windows 8 the system goes to a blank screen (no cursor, no mouse, CTRL+ALT+DEL not working).
    On next reboot, it does not start automatically the Recovery/Repair procedure and goes through the same steps again. It's not a loop, it just hangs.
    Looking into c:\windows\system32\LogFiles\Srt\srttrail.txt I see the following error message at the bottom of the file on the time of my last boot attempt: "Operating system version is incompatible with Startup Repair"
    I tried several things without success, so now I want to solve the problems one by one and first thing is to understand what might be causing the "Operating system version is incompatible with Startup Repair" error and how it can be solved.
    Thanks for reading

    Hi,
    Any update here?
    I agreed with the others.  First, if we have any backup available to restore Windows 8.1, we may take use of that.
    If we don't have any backup available, we'd better contact the manufacturer side for a deeper help.
    Or as Janek Fehn suggested, make a clean install of Windows 8, then update to Windows 8.1 again.
    Best regards
    Michael Shao
    TechNet Community Support

  • Error 8201 (Database version not available) during ODatabase() in VC++

    Hello all,
    I'm Beginner and i think i have a stupid problem,
    when i execute under VC++ V6 SP5 (and IE 5.5 SP2) Under W98se :
    OStartup();
    ODatabase odb("essai","SYSTEM","manager"); // 'essai' is an existing database, no problem with sql*plus
    if (!odb.IsOpen()) {
    long err = odb.ErrorNumber();
    char chaine[100];
    sprintf(chaine,"Error n0=%ld",err);
    ::MessageBox(0,chaine,"DataBase",0);
    Displaying 'Error n08201' : 'Database version not available' ???
    PLEASE, THIS PROBLEM TURN ON MY MIND DURING ALL THIS WEEK-END AND I TEST, I RELEASE, I SEARCHE, AND NOTING...

    My Reponse from My Question :
    It was so easy to run 'lsnrctl start'.
    (Listen Module Manager).
    2 days to find this.
    VB doesn't work anymore.
    I've executed an pre-compiled example 'login.exe' which display --> 'No Listen Module'.
    Bye All.

  • EXP-00037: Export views not compatible with database version

    kindly help with this error. We have already run catexp.sql but still that is not helping, we are still getting the same error.
    we are exporting 8i db.
    Export: Release 8.1.7.0.0 - Production on Thu Feb 21 14:34:25 2008
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    Connected to: Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    EXP-00037: Export views not compatible with database version
    EXP-00000: Export terminated unsuccessfully

    Does this apply to you?
    Error: EXP 37
    Text: Export views not compatible with database version
    Cause: The Export utility is at a higher version than the database version
    and is thereby incompatible.
    Action: Use the same version of Export utility as the database.

  • Can I completely reset /clear the bluetooth subsystem / device database?

    I have a Canon MP600 printer/scanner and connected a bluetooth dongle to it (the official Canon part) for the first time today. Unfortunately the user guide omits a few important details and the net result is that both a Mac Pro (early 2008, BT module included) and Macbook Pro (~late 2006, Leopard upgraded) appear to have become very confused about what to do with it.
    Initially, contrary to its documentation, the printer ships with bluetooth security turned off. So, my Mac Pro connected to it happily without requesting a passkey and I printed a test page OK. The laptop wouldn't see the printer, though; it seemed that without security features turned on, the printer would only allow one computer to connect. I dug around in the printer's settings (it has an LCD screen so you configure it on-device), found the security option, enabled it and set a passkey (a 4 digit number in this particular printer's case).
    Using bluetooth preferences on the Mac Pro, I removed the printer from the device list, then re-ran the setup assistant. It saw the printer, immediately recognising its name (the first time ever, the machine showed the address first, then the name a while later). It prompted for the passkey at the "gathering information" stage. In bluetooth preferences, the printer icon was showing 'Connected' status. At the "To complete the set up..." stage of the setup assistant, I named the printer, clicked on Continue, and watched the printer status suddenly change to not connected. The setup assistant re-showed the "To complete the set up..." page; I set the same name again; this time, I was taken to a page saying "You did not configure any of the available services for your Bluetooth device". Huh?! Extended information on the device in BT preferences says says that it's configured and paired, but not connected. Searching for the error message on Google produces literally no hits, which is a rare thing indeed.
    Worse still, the laptop now does exactly the same thing. I've even tried turning off security entirely on the printer, power cycling it and rebooting both machines, but now neither will properly talk to the printer ever again. They just flicker through these strange "Not connected -> connected -> not connected" cycles and refuse to proceed with the obscure "You did not configure..." message.
    Given that the Mac Pro successfully printed via this printer at least once, I should be at least able to get the thing to work again with security settings turned off (inadvisable though this is). But Leopard refuses. It's caching some data about the printer somewhere and this is screwing things up.
    So, the short part of my very long question is: How do I totally reset the bluetooth software and/or hardware subsystem / device database so that it has no "prior knowledge" or expectations of devices which it detects?
    Many thanks.

    Replying to my own message for the sake of search engine archives.
    I have not found a way to reset/clear the 'knowledge' that the Bluetooth system seems to keep of devices once it's talked to them, or, therefore, a solution to the strange Bluetooth setup assistant behaviour. Curiously, though, the 'not connected' issue with the printer doesn't seem to stop it from being printed to.
    Having rebooted a few times, I printed a web page accidentally (! - I meant to save as PDF from the print dialogue box) and the device brought itself on line, received the data and printed, then dropped offline again. So it seems to be working fine. My guess would be that the online/offline behaviour is actually a normal feature of the way this particular device works, while the strange setup assistant behaviour is its way of saying that the device is already set up and working so it has nothing else it needs to do.

  • Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

    I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
    there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
    Maybe there is a newer setup installer? But I can't find it.
    [10:42:54]: Error:
    :Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read returned true.  so far, this is OM DB, not an empty DB
    [10:42:54]: Debug:
    :Connection was not open.  We will try to open it.
    [10:42:54]: Debug:
    :SqlConnectionReady returned True.
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read did not return true.  The MG is missing. This is not OM DB
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Always:
    :Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.

    Never mind, found it!
    Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
    CLR Types for Microsoft® SQL Server® 2012 and now it works!! 

  • Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

    Team , Thanks for looking into this  ..
    As a last resort on  optimizing my stored procedure ( Below ) i wanted to create a Selective XML index  ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
    Index feature is not supported for the current database version.. How ever
    EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
    Is there ANY alternative way i can optimize below stored proc ?
    Thanks in advance for your response(s) !
    /****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    -- EXEC [dbo].[MN_Process_DDLSchema_Changes]
    ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
    AS
    BEGIN
    SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
    SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
    select getdate() as getdate_0
    DECLARE @XML XML , @Prev_Insertion_time DATETIME
    -- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
    SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
    -- PRINT '1'
    CREATE TABLE #Temp
    EventName VARCHAR(100),
    Time_Stamp_EE DATETIME,
    ObjectName VARCHAR(100),
    ObjectType VARCHAR(100),
    DbName VARCHAR(100),
    ddl_Phase VARCHAR(50),
    ClientAppName VARCHAR(2000),
    ClientHostName VARCHAR(100),
    server_instance_name VARCHAR(100),
    ServerPrincipalName VARCHAR(100),
    nt_username varchar(100),
    SqlText NVARCHAR(MAX)
    CREATE TABLE #XML_Hold
    ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
    BufferXml XML
    select getdate() as getdate_01
    INSERT INTO #XML_Hold (BufferXml)
    SELECT
    CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
    FROM sys.dm_xe_session_targets xet
    INNER JOIN sys.dm_xe_sessions xes
    ON xes.address = xet.event_session_address
    WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
    --RETURN
    --SELECT * FROM #XML_Hold
    select getdate() as getdate_1
    -- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
    CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
    FOR
    PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
    --RETURN
    --CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
    --SELECT GETDATE() AS GETDATE_2
    -- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
    --CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
    --USING XML INDEX [IX_XML_Hold]
    ---- FOR VALUE
    -- --FOR PROPERTY
    -- FOR PATH
    --SELECT GETDATE() AS GETDATE_3
    --PRINT '2'
    -- RETURN
    SELECT GETDATE() GETDATE_3
    INSERT INTO #Temp
    EventName ,
    Time_Stamp_EE ,
    ObjectName ,
    ObjectType,
    DbName ,
    ddl_Phase ,
    ClientAppName ,
    ClientHostName,
    server_instance_name,
    nt_username,
    ServerPrincipalName ,
    SqlText
    SELECT
    p.q.value('@name[1]','varchar(100)') AS eventname,
    p.q.value('@timestamp[1]','datetime') AS timestampvalue,
    p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
    p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
    p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
    p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
    p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
    p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
    p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
    p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
    p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
    p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
    FROM #XML_Hold
    CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
    WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
    p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
    AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
    AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
    SELECT GETDATE() GETDATE_4
    -- SELECT * FROM #TEMP
    -- SELECT COUNT(*) FROM #TEMP
    -- SELECT GETDATE()
    -- RETURN
    -- PRINT '3'
    --RETURN
    INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
    [UserName]
    ,[DbName]
    ,[ObjectName]
    ,[client_app_name]
    ,[ClientHostName]
    ,[ServerName]
    ,[SQL_TEXT]
    ,[EE_Time_Stamp]
    ,[Event_Name]
    SELECT
    CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
    ELSE T.nt_username
    END
    ,T.DbName
    ,T.objectname
    ,T.clientappname
    ,t.ClientHostName
    ,T.server_instance_name
    ,T.sqltext
    ,T.Time_Stamp_EE
    ,T.eventname
    FROM
    #TEMP T
    /** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
    -- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
    WHERE ddl_Phase ='Commit'
    AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
    AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
    WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
    AND MN.[DbName] = T.DbName
    AND MN.[Event_Name] = T.EventName
    AND MN.[ObjectName]= T.ObjectName
    AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
    AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
    -- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
    --SELECT GETDATE()
    --PRINT '4'
    --RETURN
    SELECT
    top 100
    [EE_Time_Stamp]
    ,[ServerName]
    ,[DbName]
    ,[Event_Name]
    ,[ObjectName]
    ,[UserName]
    ,[SQL_TEXT]
    ,[client_app_name]
    ,[Created_Date]
    ,[ClientHostName]
    FROM
    [dbo].[MN_DDLSchema_Changes_log]
    ORDER BY [EE_Time_Stamp] desc
    -- select getdate()
    -- ** DELETE EVENTS after logging into Physical table
    -- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
    -- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
    -- SELECT @XML
    SELECT GETDATE() GETDATE_5
    END
    GO
    Rajkumar Yelugu

    @@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
        May 14 2014 18:34:29
        Copyright (c) Microsoft Corporation
        Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    (1 row(s) affected)
    Compatibility level is set to 110 .
    One of the limitation states - XML columns with a depth of more than 128 nested nodes
    How do i verify this ? Thanks .
    Rajkumar Yelugu

  • BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

    hello,
    i getting the following error message in event id while backing up my SQL db by third party backing tool
    BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
      <Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
    please suggest the solution.

    Hi pulkit,
    According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
    NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
    you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
    https://support.software.dell.com/kb/SOL14674
    In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
    Perform the following tasks as appropriate:
     1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
     2. Ensure that the backup and restore medium has sufficient space.
     3. Correct any errors raised by third-party backup and restore software.
    There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
    http://technet.microsoft.com/en-us/library/ms187510.aspx
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

Maybe you are looking for

  • I have a MACMINI and use Skype daily,

    I have a Mac Mini and I use Skype daily, but after a few minutes it starts to echo badly and make noises, How do I control this? what do I have to buy to stop the noise?

  • Use Oracle RAC Database 10g on SunOS nova 5.9

    Hello! We use Oracle RAC Database 10g Enterprise Edition Release 10.1.0.5.0 - 64bit that consist of two nodes on SunOS nova 5.9 Generic_117171-17 sun4u sparc SUNW,Sun-Fire-V440. Connection string as follows: jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALAN

  • No. Of files

    Hi Guys, Is there any Function Module to find number of file in an application Server Directory. I did check the FM RZL_READ_DIR_GLOBAL & RZL_READ_DIR. Not working for me. Regards Rajendra

  • Does Muse have a widget that will allow users to book tables and/or pay for take-away?

    I have already used Muse to set up my portfolio. Now a new challenge - I need to create a website for mobile / tablet users that permits browsing dishes, booking tables and maybe a widget that allows them to pay on-line before collection? I've scanne

  • Thumbnail image links to larger image - how?

    Mac OX 10.4.11 - GoLive CS(1) I want to create a series of thumbnail images that would act as link to a single large image area (see example http://www.markvelasquez.com/gallery.php?cid=1&pid=5 but ignore the dubious images). 10 or so different thumb