Sudden I can't do any thing with my iPhone, It got died

Hi,
All on a sudden I can’t do any thing with my iPhone. It got died, upon plugged in the power to recharge the battery its automatically switch on and start working, i have been facing this issue consistently (from last 1 week i was facing this issue around 3 times). Please look few other details below and provide some solution for this.
FYI - 1. phone was fully charged when phone was died.
2. when phone was dead, i tried to press home button and lock button simultaneously 10 to 15 seconds, still it is not responding

macminded wrote:
on the about tab, it says 13.7 gb capacity.
Available: 0 bytes.
You have "0" available.

Similar Messages

I have miny iPad that I restored ,i can not do any thing with it just because iam not the original owner, went to apple trying to do something , they could not help,look like apple is trying hard to make me trash my all devises.thanks apple

I have miny iPad that I restored ,i can not do any thing with it just because iam not the original owner, went to apple trying to do something , they could not help,look like apple is trying hard to make me trash my all devises.thanks apple

Sounds like you bought the iPad secondhand and the previous owner did not remove it from his/her iCloud account.
If you are unable to contact the original owner, the iPad is (unfortunately) useless to you.
~Lyssa

HT5312 I can't buy any thing with money on my iTunes I fregot my security questions and I can do it any other way I now my password and every thing else

I can't buy any thing with money on my iTunes I fregot my security questions and I can do it any other way I now my password and every thing else

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

Can't join any wifi with my iPhone 5

the error message states it states "incorrect password for wifi". I can get on with ipdad and macbook. password is correct. I set the wifi to WPA/WPA2 Personal

Howdy Benjamin,
Here is a great little article about troubleshooting wifi connections on iOS. Named iOS: Troubleshooting Wi-Fi networks and connections it can be found here http://support.apple.com/kb/ts1398.
These sections in particular:
Occasionally while using your iOS device, you may notice unexpected Wi-Fi behavior, such as:
Difficulty locating or connecting to a network
Unexpected Wi-Fi signal strength or disconnects
Unable to access the Internet
Not automatically connecting to Wi-Fi when expected
Follow these steps to troubleshoot the above issues.
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
And
Unable to connect to a Wi-Fi network
Verify that you are attempting to connect your desired Wi-Fi network.
Make sure you are entering your Wi-Fi password correctly.Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Regards,
Sterling

I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In

I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In. I Can Not Type Anything Into Yahoo Search Or Any Where I Need A Password. Anytime I Try To Type Anythink In It Locks Up Firefox The Same With Thunderbird Can't Write An Email Thunderbird Locks Up When I Start Typing. My Roboform Will No Longer Fill In The Forms. I Have Uninstalled All Three Programs Three Times. Can You Give Any Help.
Thank You

Hi,
Sounds like you have two problems there. One for Firefox and one for Thunderbird.
We can help you with the Firefox question but your other Thunderbird question will have to go into the Thunderbird queue. You can create a new Thunderbird question by going to [/questions/new/thunderbird]
Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

Suddenly I can't burn any tunes to disc. I receive an error report - 4280. What's the problem? It all worked fine last week.

Suddenly I can't burn any turnes to disc. I receive an error report - 4280. What's the problem? It was all fine last week.

Additional information:
-also ran "Repair" with new download of iTunes
-am using the same spindle of CDs that worked perfectly a month ago. Tried another brand also to be safe. None worked.
-ran CD/DVD diagnostics within iTunes with Apple Care - no issues apparent
-also tried write-speed 20X on advice of Apple Care (don't know why they thought 20X would be the magic number after the other 3 I tried didn't work)
-tried running itunes in another user account on the computer - same problem, same error code
-Apple suggested it was a copyright issue. I can't even burn music that I created/recorded myself, so that doesn't make sense.
-They thought maybe Quicktime wasn't installed properly, so we checked a film in Windows Media - it played, meaning Quicktime was fine apparently.
Solution:
Unclicked CD text option & Sound Check, ran burn from the File drop down menu (max speed) on a Philips CD-R and it worked! Had been right clicking the playlist name and selecting Burn option from there. That being said, it did not work on 2 other brands prior, with same settings. Not sure why. Just happy it's working again. Is it a brand issue?

My apple. Version is 4.2.1 and I can not download any thing on it being books, audio books video etc. I mean nothing how can I do it and also upgrade my iPad?

My iPad can not download any thing at all.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

I can no longer hold down a key and get the character to repeat as say, aaaaa. Instead I get a menu of accented a's, such as àáâäæãåā. I can't find any thing in the System Preferences that allows my to turn this function off

I can no longer hold down a key and get the character to repeat as say, aaaaa. Instead I get a menu of accented a's, such as àáâäæãåā. I can't find any thing in the System Preferences that allows my to turn this function off.

Back up all data before proceeding.
Please triple-click anywhere in the line below on this page to select it:
defaults write -g ApplePressAndHoldEnabled NO
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Log out or restart the computer.

Since last update , I can't see any thing any more

Since last update , I can't see any thing any more, but I can hear sound and music, and I can see my mouse change to the arrow in order to clic. Windows 7, explorer 9, flash player 11.6, I follow your prost it in order to fix it with out go result. What to do? I try to find a previous update for try, but I can't find it.
Thank for reading

fadesone28 wrote:
i did the last update 2 days ago with the whole removing older versions of flash and what not, now my whole internet looks different and i cant sign into latest version of yahoo home page for my mail or anything , any help or can i un-update?
You can always revert your system to how it was 2 days ago by reinstalling from your Time Machine Backup. Otherwise I would be having a read through the Yahoo Troubleshooting forums for people who may have a similar problem.
Pete

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed

All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

Hi
I haven't even touched anything that I know of?
And You've not moved or emptied any folder on Your Hard Disk named
• iMovie Event's - or -
• iMovie Project's
Or - disconnected any external hard disk/s
As one CAN NOT move the Event's or Project's on / via DeskTop/Finder - AS iMovie then loses the connection to them. Moving them - MUST BE DONE - within iMovie application - to work OK.
So if You by meaning or accident moved it/them - Move them back - and iMovie might work again.
ELSE - If You are 100% sure that You didn't move them then
• Trash iMovie Pref and Cache files
• Run Repair Permissions - Disk Util tool
• Run Repair Hard Disk - Disk Util tool - BUT YOU MUST Start-Up Your Mac from DVD or External HD to do this
and may be all will work OK again
Yours Bengt W

Hy i Upgrade my iPhone and now my mp4 Data are in the file Video and i can't make any Playlist with them! Any idea?

Hy i Upgrade my iPhone and now my mp4 Data are in the file Video and i can't make any Playlist with them! Any idea?

I'm having the same issue, i restored my phone to Factory settings, even tried restoring it to my backup, half of my music bought from itunes won't play on my iphone and i'm super annoyed, this only happened once i updated to ios 7.2 so i assume its another glitch to go with my imessages not sending, getting sick of this.

HT4623 when i make software update my i phone shut down and it can't start it always Show the apple mark and then disappear i can't make any thing what the problem and what the solution thank you

Dear gentlemen:
i know how can update ios update but when i make update my iphone shut down and it can't start.
it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
thank you

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Sudden I can't do any thing with my iPhone, It got died

Similar Messages

Maybe you are looking for