Sudden Internet issues....

I bought my Macbook in Jan 2011, and this week my internet has been acting up.  I cannot access the itunes store or applications, and a lot of my internet pages are not accessable. Pretty much only Facebook and youtube work... if I try to use any other sites, it shows as an error. My msn also signs me out constantly.  My wireless internet is connected fully, and appears to have no connection problems, yet this has been happening.  I thought I might have a virus, but I checked my system and I don't. Help please!

john Watts Jr. wrote:
The other two cannot connect.
I ran airport utility on all 4 machines.
Welcome to Apple's discussion groups.
Could you see your base station from each Mac?
On the Macs that can't connect you might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take you a minute or so to try.

Similar Messages

  • 10.3.9 Internet issues

    Hi All
    i have been trawling through the fourms and still cannot find a solution to my iMac internet issues. I have done a complete format and reinstall of Mac OS X 10.3.9 (to be fair i downloaded update on another computer and instelled via USB stick) everything works great can import into firewire from camcorder etc. Airport card can see the wireless connection but when i enter the password it states there is a problem and connot connect. I have tried everying (to what i can understand anyway) and teh main reason for a clean install was to get rid of any possible conflicts that may have been there.
    everything else can use the internet including my MacBook (intel) fine. Some one did suggest once that DNS settings were not correct which to be honest i did not userstand how to alter them, plus if eberying else was ok why just this iMac playing up.
    Please can you assist just want to this to connect so my son can upload his filming to pleople for his re school assignments.
    thank you in advance
    Peter

    Oops!
    Could you specify what iMac you have, the specs of the system & computer,
    as that may help research or find workable ideas for you to try. This would
    help in troubleshooting, or in discovering Support articles to link you to in
    the course of a discussion.
    I just re-read your post and had thought it was for a later
    mac + OS X that would not run in PowerPC vintage!
    (The mention of MacBook threw me off, as did a recent newer
    OS X upgrade that may run -- in that newer hardware 10.9.3)
    So you've upgraded a PowerPC iMacG4 to Leopard 10.3.9
    and the internet doesn't work? The wireless router may be
    using a different security protcol than the old Airport Card
    can support; you may have to test the unit via Ethernet to
    be sure the computer itself is fully updated. It may go to
    Apple servers to look for Software Updates.
    The settings for the wireless security may be incorrect,
    since later WPA2, won't apply to vintage AirPort card.
    With a later OS X such as Tiger 10.4(.11) the odds do
    improve for connectivity to the internet.
    The DNS settings should not be an issue if you can use the
    internet with a recent version computer and later OS X.
    Not sure how to help, except to try as a test, to run without
    the security you'd really want with the wi-fi (WPA2, etc)
    turned on, to see if the old iMac can then use it.
    Another issue would be the lack of correct frequency; a
    newer Wi-Fi system may not be set to be backward
    compatible to 802.11a/b, newer ones use 802.11/b/g/n/+
    You may check to see if the router has a setting to allow
    use of lower or older spec connection.
    •Solutions for connecting to Internet, set up sm Network & troubleshooting:
    http://support.apple.com/kb/HT1714
    •Creating a small ethernet network:
    http://support.apple.com/kb/HT1433
    Panther is a very old OS X and hardly finds any support.
    There is an area in ASC discussions for 10.3.x & earlier:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.3_and_earlier
    You may be able to get a download .PDF manual for Panther
    http://manuals.info.apple.com/en_US/MacOSX10.3_Welcome.pdf
    Or later Tiger, in .PDF from this Manuals support site:
    http://support.apple.com/manuals#macos
    Sorry to not have more info...

  • Macbook pro internet issues

    my computer has been taken in three times for internet issues. each time they say it is fixed. I have rest my safari several times, all the internal parts have been checked and are said to be in perfect working order, and i have had the entire profile of my computer wiped clean, having to reinstall everything. now it is doing this and will stay on this gray screen for up to a half hour, until the box that says safari has quit working, or the flash player plug in has quit working. Has anyone else had this problem, if so any help would be great, casue I really do not want to take the computer in again only for them to tell me its fine. 

    my computer has been taken in three times for internet issues. each time they say it is fixed. I have rest my safari several times, all the internal parts have been checked and are said to be in perfect working order, and i have had the entire profile of my computer wiped clean, having to reinstall everything. now it is doing this and will stay on this gray screen for up to a half hour, until the box that says safari has quit working, or the flash player plug in has quit working. Has anyone else had this problem, if so any help would be great, casue I really do not want to take the computer in again only for them to tell me its fine. 

  • Incessant Internet Issues

    Hi there
    It's been a while since I last posted on these forums with an internet issue, but my connection is really messed up. I'll see if I can do the speedtester stuff in between the constant disconnections that I am getting.
    My router stats are at the end of this message. Despite the fact my Downstream speed keeps switching between 6Mbps - 7.9Mbps, I am getting around 1.6Mbps, which I expect. The very high number of errors is telling me that my line is really noisy: my parents have told me that the line, when using the phone, was very noisy when calling other people, which would confirm that theory. 
    I do know that there are some works being done in a plot of land right next to the telephone exchange and I suspect it's BT adding the fibre broadband exchange in preparation of activating fibre in my area by the end of the year, is it possible this is causing line issues ? I know we've also had really bad weather and I'm suspecting this to be a factor in my connection issues.
    Many thanks for any help I can get.
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:05:55
    Downstream:
    6.375 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.2 dB / 22.0 dB
    Line attenuation (Down/Up):
    7.5 dB / 4.0 dB
    Output power (Down/Up):
    12.0 dBm / 12.3 dBm
    FEC Events (Down/Up):
    9986496 / 638
    CRC Events (Down/Up):
    12054 / 615
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    143872 / 649
    Error Seconds (Local/Remote):
    933 / 604
    YouTube Channel: http://youtube.com/lpsajuuk
    Follow me on Twitter @supersajuuk
    Solved!
    Go to Solution.

    john46 wrote:
    the infinity upgrade will have no effect on standard broadband services are you connected to the test socket also have you tried the quiet line test dial 17070 option 2 you should here no noise any noise heard need reporting to BT Faults on 151 with no mention of broadband in the call
    I'm not connected to test socket, but I doubt that would make a difference to a noisy line ?
    I'll do quiet line test, but my router settings do seem to be indicating the line is noisy. Here's another set of stats from just now.
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:26:38
    Downstream:
    6.375 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    12.8 dB / 22.0 dB
    Line attenuation (Down/Up):
    7.5 dB / 4.0 dB
    Output power (Down/Up):
    12.0 dBm / 12.3 dBm
    FEC Events (Down/Up):
    13286918 / 840
    CRC Events (Down/Up):
    16125 / 833
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    221506 / 887
    Error Seconds (Local/Remote):
    1084 / 707
    YouTube Channel: http://youtube.com/lpsajuuk
    Follow me on Twitter @supersajuuk

  • Is July 9 internet issue a problem for Mac Pro users?

    Is the July 9 internet issue a problem for Mac Pro users or has Apple taken care of this issue in updates?

    It is a only a problem for users affected by the malware that replaces their DNS IPs on their macs. They already have a serious problem which they should fix. Follow the url in sig's post to determine if you are infected and how to remove it.

  • Lots of crazy internet issues

    I seem to be having a massive amount of random internet issues after upgrading to Leopard. The first and most apparent is that Mail and iChat both get randomly disconnected and Mail often insists that it cannot connect to the IMAP server one moment, only to work perfectly again within a minute while no other internet services (Safari, Transmission) are affected.
    Safari has decided that http://news.bbc.co.uk is actually http://www.apple.com. I kid you not. I try and look at BBC news and I am consistently redirected to Apple's website. news.bbc.co.uk/iphone goes to apple.com/iphone. I've never seen anything like it before in my life.
    Mail's RSS feeds seem to randomly disappear. No trace of their existence is left. After switching the 'default RSS reader' preference to Safari and then back to Mail, they re-appear - with all articles unread.
    On the whole, quite a number of confusing bugs.

    So, what happens if you go here: http://212.58.226.73/ ? That's the IP address that news.bbc.co.uk is supposed to point to. I found that by looking in Tiger's Network Utility as my Leo is still on it's way to me. If you want to know what that IP is before going there ( a good idea ), you can put that in the lookup tab on Net Util and see what comes back.
    If the IP works, then DNS is hosed somewhere. See what Net Util says news.bbc.co.uk translates to. If it the number above, it's a Safari thing. If it's apple (starts with 17 IIRC) then it might be fixable by flushing the DNS cache though I don't know how to in Leo (shouldn't be hard).
    If you did an upgrade install, you might want to reinstall using Archive and Install.

  • Sudden Internet Sharing Issue From Laptop to Tower

    I have a laptop ibook G4 running 10.5.7 that is connected successfully to wifi.
    Until yesterday, I was sharing successfully with my G5 tower running 10.4.11.
    I restarted my laptop last night and it wouldn't connect. I checked my settings under 'network/airport' and light was green and I got an IP address. I also saw 'network/ethernet' showed green and had a different IP address (not sure it is supposed to do that, but I'd assumed it was the IP address for my tower)
    Anyway, I unplugged the ethernet going to the tower and my laptop started working.
    Now, as soon as I plug the ethernet cable up, the laptop acts like its not connected.
    I turned 'network/ethernet' to off and that makes my laptop work again...
    Does this sound normal?
    My tower's prefs arent identical since its 10.4.
    I'd had both set to sharing/internet/ethernet and it's worked for weeks. I'm not sure what the current problem is a result of. Should my laptop 'network' settings be set for airport only? Or do I need to monkey with the 'ethernet' too? Should both computers be set for 'sharing' with built-in ethernet, or just the laptop?

    First update your Mac OS. This issue may have been solve in one of the recent updates.
    Second, be sure that the router firmware is up-to-date. This sleeping issue was common when Leopard first came out. Many of us had it and it was resolved by updating router firmware, or replacing old routers. I include myself in that group. The problem disappeared after updating both my routers.
    I would also ignore WEP encryption. It takes a few minutes for anyone in range to hack it.
    If your router does not support WPA2, then it's too old and you should replace it, killing two birds with one stone, so to speak.
    Any router sans WPA2 is simply too old for today's OSs, and Leopard is very demanding when it comes to router security.

  • MacBook Pro Internet issue

    Hello,
    I bought my MacBook Pro about 3 months ago (my first Mac) and I am having some pretty annoying internet/connectivity issues.
    The issue I am having is that I suddenly lose internet service randomly. The bars on the top right of the screen will still show full, yet I can't connect. I contacted my ISP and they came over to my house and replaced my cable modem. I also bought a new router (Netgear) since my last one was old.
    I still am having the same issue. Also, when it is working it only works if I am maybe 15 feet from my router. If I go any further in the house I lose service again.
    Any help would be much appreciated.
    Thanks

    Access the router's admin area and try changing the channel to 9. Then I would try using OpenDNS servers.

  • MBP mid 2009 sudden HDD issues / slow and unresponsive

    Hello all,
    First of all i want to apologize if there was a similar topic, but ive tried looking with no result. I am in a big crisis and i think this forum is my only way of finding a solution.
    The problem started yesterday, when all of a sudden my computer became unresponsive (finder and apps), although music from itunes continued playing. I had no choice but to **** it down with the button.
    When i turned it back on, i got the blinking folder with the question mark. Tried all the advice with no success. Then i opened the computer, checked the flex cable and the hdd which both seemed fine. Closed it back up, started it up again and the same story. Then i moved the computer after half an hour and the thing booted normally. The only obvious thing was that programs tended to freeze for a minute or two and i get the umbrella and then it works.
    Since im a photographer i have lots of work on it and immediately bought an external hdd for backup. Time machine wasnt successful since it worked so slowly and it worked on intervals. 2 mins of copying, 5 mins of nothing and really slow ( the hdd graph in activity monitor showed continious spikes with a flat line inbetween. I gave up on that and now im copying the important stuff manually which seems to be working fine.
    However the computer still has a big issue - i am hoping its the flex cable, since it suddey started working. In case of hdd failure i dont think i would be able to get back in and use it? The hdd is a year old, its the seagate hybrid - momentus 750xt and the os is mountain lion.
    Does anyone have a clue or a tip what to do? I have to order the flex cable via ebay since there are no authorised deLers for apple that have spare parts available here in Lisbon, Portugal. Im afraid making a clean install wont help , although on a windows computer id do that the first thing..
    Thanks a lot for any help, im desperate and i have a few weddings to edit this month, and since i study abroud this is the only xomputer i can use!
    Regards, Jaka

    It does seem to be the internal cable or connection is faulty, but only on an intermittent basis. 
    My suggestion is to backup your data on an external HDD using Disk Utility>Restore or Carbon Copy Cloner.  This will create a drive that will enable you to boot your MBP and use it externally until you get your cable replaced.
    Ciao.

  • Very odd internet issues.

    I just bought a 21.5" refurbed iMac. Worked great for a week and now for the past week or so, I cannot stay connected to either Firefox or Safari for more than 2 minutes before the browser starts "Looking up" the website and then it completely disconnects. I go into the network diagnostics while this is happening and I see that Internet and Server have orange dots next to them, then after a little while those dots turn red along with ISP's dot. I called my ISP yesterday and they said that everything on their end is good. I believe them because, I had been playing WoW and Warhammer Online since I got the computer and have played for up to three hours at a time, and I never had any disconnects or lag form the games at all. I even connected to WoW while my browser's connection was tanking to see if I could connect and I did just fine with no lag or disconnects. I even pinged some websites while this was going on and that worked as normal. Probably the oddest thing of all this, is that if I go straight from my cable modem to my computer I get absolutely no internet at all. I can only go through my router to get connected. I did call Apple about this and the only thing they came up with was for me to delete these com.apple.safari, and com.apple.mozilla files, but that didn't work. So, now I'm at a loss of what to do. I've restored my router back to factory settings and downloaded an update for it, played with IP addresses and DNS addresses and nothing is working out. With each day that passes the connection times to my browsers get less and less. My router is a Netgear WGR614 v.5 btw. This all seems to happen when I just go wireless with the iMac also. If there's anybody out there that can help it would be greatly appreciated.
    TLDR: Internet browsers don't stay connected to internet, but I can play online games, and ping websites with no issues. Modem straight to computer does not work, have to go through router to connect. Called ISP and called Apple, but no solutions have helped.

    Based on which device is configured to negotiate the internet connection with his ISP this is to be expected. For example, if his router were programmed to negotiate through the modem and establish the external IP and also negotiate with all the devices on his LAN and assign the internal IPs, then his Mac is only configured to get its internal IP from the router.
    So, if he removes the router from the setup, then he would need to reconfigure the Mac to now negotiate directly with his ISP for its internet connection.
    He does not mention having done any of that in his post. So an explanation of how the home LAN is setup and each device configured would be helpful in understanding what may be going wrong.
    Dah•veed

  • Internet issues on my new Macbook Pro.

    I'm hoping someone might be able to shed some light on an issue I have been having! I've just got a new Macbook Pro, so late 2011 model and ever since having it I have had issues with the internet. Forgive me if I'm not able to explain very well what is going on, but ill give it my best shot.
    So I'm Wi-Fi to connect, which is on a 10mb connection, and using Safari on the Mac. When I first open Safari, the apple home page loads straight away no issue. I tend to be able to use the net for about 10 minutes without any issue. Then, for no reason whatsoever, Ill click on a link or type a web address, and it will take FOREVER to load, sometimes it won't load at all. I'm not talking anything heavy with pics or video, just a standard webpage, it could be anything. The other issue I have, is for example like today, I was on the guardian website, and I opened a few links in some new tabs, probably about 8 in total and the same thing always happens. Some load instantly, some take forever, so fail to open at all. If I turn the Wifi off on the Mac, and literally straight back on again, and refresh any page, it will load instantly (about 80% of the time this works). then after a few minutes same thing happens. Then after a while, it will go back to normal again and so forth and so forth! It's becoming quite frustrating.  The wifi connection isnt lost, its still connected according tot he symbol at the top, it just isnt working.
    The best way I can describe it, is its like the router is getting 'clogged up' and struggles to get any info to my Mac. then after a while, it de-clogs itself and were good to go for a few minutes again.
    I've never had this problem, with my main pc which is connected wirelessly, or even my little netbook I was using as a laptop before this. I was able to open as many links and tabs as I wanted with no issue, and never had hang times like this whilst waiting for anything to open!  There doesnt appear to be an issue with my connection, as every pc, phone and even ps3 can connect without a single issue.  The PS3 will happily stream HD netflix without any issue over wifi
    I'm not sure what is going on! When my Mac is downloading big files, it never seems to have any problems and the d/l speed stays pretty consistent. I've run speediest at various points during various days, and I'm getting a pretty steady 10mb.
    Anyone that can shed any light would be a lifesaver!! I'm hoping there isn't an issue with the Mac however this is getting to the point of unbearable, and im close to returning the **** thing!
    Thanks in advance!

    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

  • HP Pavilion p7-1414 PC Internet Issues

    Wasn't sure where to put this..
    Lately I have been experiencing an issue with the Internet on this computer. I am a gamer, so basically when I play games and browse the internet (Google Chrome) and every now and than Skype a friend. Whenever I do this all at the same time the internet gets REALLY slow. I mean like Skype get's really staticy, everything on Google Chrome loading really slow, and having really high latency in a game (Doesn't matter which game).
    And i've looked into this with all the computers, and any issues with the router, etc. But my other desktop I have in the room with me, doesn't do this. Runs perfectly smooth while I do all of this.
    So after testing all of this and looking into this I have come to a conclusion. The Network Adapter built into the computer doesn't work properly or is just bad. So I tried to hook a Dynex Wireless G Network Adapter (Model No. DX-BUSB) into the computer. It crashes the computer within 5 minutes sometimes within 30 seconds whenever I tried this.
    I would really like some assistance in this issue of mine. Thank you for your time if you managed to read this far.

    Are we comparing computers? Then what are the exact model numbers? What are the side-by-side differences in CPU, GPU, motherboards, RAM, and OS.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Sudden Display issues in Firefox from Dreamweaver-built pages

    Hi, first time posting and a novice at Dreamweaver and web design so please bare with me.
    I'm an IT administrator for a small charity company and they decided to ask me to build them a website, I bought Dreamweaver in University and had a small try with it but never really used it since.
    Now I'm no web designer but I'm trying the best I can, I managed to make a few preliminary pages for use and found they displayed correctly in most browsers apart from IE and Opera.
    But Suddenly today - after no editing or alterations since friday (and it displayed fine yesterday on tuesday), it started experiencing the same issues in Firefox this morning for no apparent reason. I assumed that it would be a problem with Firefox but when trying to sign up to Firefox help I meet an "Access Denied" page after clicking to sign up. Now I know there's no point in searching their forums for that issue because of course, how can someone complain they have the problem when the fact they can't get on the forums to post is what's preventing the post in the first place?
    I googled both of those issues and turned up nothing, which led me here.
    The "Access Denied" at signup issue is obviously not what I'm seeking for here though, but would like to know if anyone else has experienced the issue with the formatting suddenly displaying incorrectly in browsers when they worked fine before?
    Like I said, I'm a complete novice at web design and dreamweaver so feel free to tell me the coding in the website is pants, I know it is but it does (did!) the job in most browsers.
    Any help at all would be appreciated.
    Faultlessdark
    www.guidonsupportservices.org.uk
    PS. For an ironic laugh - note the "This website is best displayed in Mozilla Firefox and Google Chrome" at the bottom of the page

    My advice, although negative, would be to stay clear unless you are confident and capable of using html and css. Dreamweaver won't do the job for you and you will be biting off more than you can chew.
    Having said that I've made the necessary changes so that your page will work in all browers. Just copy the whole html code and css below, paste into a new Dreamweaver document and save to your site root folder.
    Do not mix measurements i.e., width 43em, padding 15px etc. I would advise staying with px based measurements as measurements are critical to if the site works or not. I don't know what 43em + 15px makes but I do know what 170px + 15px makes. I have changed the width of the containers in your code to px.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <title>Home</title>
    <script type="text/javascript" src="swfobject.js"></script>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <style type="text/css">
    <!--
    body {
    font: 100% Verdana, Arial, Helvetica, sans-serif;
    background: #666666;
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #000000;
    background-image: url(background.jpg);
    background-color: #FFFFFF;
    /* Tips for Elastic layouts
    1. Since the elastic layouts overall sizing is based on the user's default fonts size, they are more unpredictable. Used correctly, they are also more accessible for those that need larger fonts size since the line length remains proportionate.
    2. Sizing of divs in this layout are based on the 100% font size in the body element. If you decrease the text size overall by using a font-size: 80% on the body element or the #container, remember that the entire layout will downsize proportionately. You may want to increase the widths of the various divs to compensate for this.
    3. If font sizing is changed in differing amounts on each div instead of on the overall design (ie: #sidebar1 is given a 70% font size and #mainContent is given an 85% font size), this will proportionately change each of the divs overall size. You may want to adjust based on your final font sizing.
    #wrapper {
    width: 909px;
    margin: 0 auto;
    .oneColElsCtrHdr #sidebar1 {
    float: left;
    width: 170px; /* since this element is floated, a width must be given */
    border: 2px solid #FFF;
    padding: 15px 0; /* top and bottom padding create visual space within this div */
    color: #FFFFFF;
    text-align: left;
    font-family: Verdana, Geneva, sans-serif;
    .oneColElsCtrHdr #container {
    width: 735px;  /* this width will create a container that will fit in an 800px browser window if text is left at browser default font sizes */
    background: #FFFFFF;
    border: 0px solid #000000;
    text-align: left; /* this overrides the text-align: center on the body element. */
    .oneColElsCtrHdr #container2 {
    width: 735px;  /* this width will create a container that will fit in an 800px browser window if text is left at browser default font sizes */
    background: #FFFFFF;
    padding: 0px 0px;
    float: left;
    border: 0px solid #000000;
    text-align: left;
    .oneColElsCtrHdr #header {
    background: #FFFFFF;
    padding: 0 10px 0 20px;  /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
    .oneColElsCtrHdr #header h1 {
    margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
    padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
    .oneColElsCtrHdr #mainContent {
    padding: 0 20px; /* remember that padding is the space inside the div box and margin is the space outside the div box */
    background: #FFFFFF;
    .oneColElsCtrHdr #footer {
    padding: 0 10px; /* this padding matches the left alignment of the elements in the divs that appear above it. */
    background:#FFFFFF;
    .oneColElsCtrHdr #footer p {
    margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
    padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
    text-align: center;
    font-size: 70%;
    .oneColElsCtrHdr #container #mainContent h1 {
    text-align: center;
    .oneColElsCtrHdr #container #mainContent h2 {
    text-align: center;
    .White {
    color: #FFF;
    .White {
    font-size: 70%;
    .oneColElsCtrHdr #container #FlashMenuLabs {
    text-align: center;
    .oneColElsCtrHdr #container #FlashMenuLabs {
    font-size: 80%;
    #sidebar1 p {
    font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
    .oneColElsCtrHdr #sidebar1 p {
    font-size: 90%;
    .oneColElsCtrHdr #sidebar1 p {
    font-family: "Times New Roman", Times, serif;
    -->
    </style>
    </head>
    <body class="oneColElsCtrHdr">
    <div id="wrapper">
    <div id="sidebar1">
    <center><h3>Site Map</h3>
      <strong>Home</strong>
      <strong><p>Guidon Support</p></strong></center>
      <p>-Our aim</p>
      <p>-What we do</p>
      <p>-Management Team </p>
      <p> -Careers</p>
    <center><strong><p>Guidon Recycling</p></strong></center>
      <p>-Materials</p>
      <p>-Our Customers</p>
      <p>-How we can help</p>
      <center><strong><p>Groundworks</p></strong></center>
      <p>-Projects</p>
      <p>-Services</p>
      <p>-Our Skills</p>
      <center><strong><p>The Charity</p>
      <p>Contact Us</p>
      <p>About Us</p></strong></center>
    </div>
      <div id="container2">
      <div id="container">
       <img src="guidon banner.jpg" width="734" height="229" />
      </div>
      <!-- Flash Menu Labs – www.flashmenulabs.com -->
      <div id="FlashMenuLabs">Oh dear, it appears you have an older version of Adobe Flash player or don't have it installed, you need it to navigate our website - <a href="http://www.adobe.com/go/getflashplayer">Go get it!</a>            
      </div> 
      <script type="text/javascript">
        // <![CDATA[
            var so = new SWFObject("menu.swf", "menu", "740", "160", "8", "#000000");
            so.addParam("wmode", "transparent");
            so.addParam("scale", "noscale");
            so.addParam("salign", "TL");   
            so.write("FlashMenuLabs");
        // ]]>
        </script> 
       <div id="mainContent">
        <h1>Welcome - Under Construction</h1>
        <p>Welcome to the Guidon website. Guidon Support services is just a small part of the Guidon Group, which covers different areas such as Recycling, Civil Engineering and work based training. Please be aware that the site is under construction and this is the Home page. This is currently on here as a test to ensure that everything displays correctly. The full website will be available soon.</p>
        <p>You'll notice that our company is split in to these different areas on the website - so if you want to know about any of our services just pick the department on the handy menu above and head on over. </p>
        <p>Our recycling services cover a wide range of materials, including various metals and plastics - if you have some materials that you want us to take off your hands, go take a look to see if we process it, then give us a call. We'll collect and move it all - for free!</p>
        <p>Guidon Support Services is the main branch of the Guidon Group. The active offshoot of The Guidon Charity, Support Services aims to give current and ex-servicemen the opportunity to transfer their experience and skills to be applied in the civilian workplace, allowing them to get on their feet if they're having trouble getting back in to work.</p> 
        <p>Our groundworks services is our own little civil engineering division aiming to install GSHP (Ground Source Heating Pump) systems for private and commercial properties.</p>
        <h2>The Guidon Charity</h2>
        <p>The Guidon Group is set up for one ideal: To  reduce the harm caused by homelessness, drug and or alcohol abuse and to  support serving or former service personnel or their families to lead a happy,  healthy and productive life. Profits generated by the Guidon Group are passed on to the Guidon Charity to help us fulfill this aim
          <!-- end #mainContent -->
        </p>
        <p> </p>
      </div>
      <div id="footer"> 
        <p>This website is best viewed in Google Chrome and Mozilla Firefox - <a href="Browser Support Page.html">Why?</a></p>
        <p>Guidonsupportservices.org.uk &copy;2011 The Guidon Group. </p>
        <p>Contact the webmaster; [email protected] </p>
      <!-- end #footer --></div>
    <!-- end #container --></div>
    </div><!-- end wrapper --
    </body>
    </html> 

  • Lumia 520 internet issues

    My phone has been working fine since I got it a few months ago, but it got dropped on the floor this morning and since then some internet services has failed to work.
    The internet app and the email app work just fine, except for twitter and Facebook websites. For some reason the Facebook and twitter app also cannot load anything. Text messages can be received and seen through the notification bar, but the messages app cant load them. Anyone know of a fix for this? Or shall I have to send it off for repairs?

    Have you tried deleting them and then re-adding them to your phone?
    If the issue persists, look into installing the 8.1 Developers Previer.
    Alternatively, if you can puchase apps on your phone consider buying Metro Mail - it's a Gmail app with functionality similar to Android and iOS apps, and an app I use for work emails.

  • Sudden Loading Issue with CP7 Courses on LMS

    These courses published with CP7 were working fine on the LMS, suddenly none of them would load for users on the company's network. External learners are still able to launch the courses with no problem. What is interesting is that all the other courses created in other authoring tools are still loading on and off the network. Any ideas anyone?

    Adding additional information about this problem.  This appears to be related to issues between Chrome and the Captivate 8 course, but I am not certain exactly why.  Today I redid the Captivate 8 file, using a working Captivate 7 file.  I published the course using Captivate as a SCORM 2004 course.  I tested the course in the SCORM Cloud and it opened correctly to the Opening screen of the course.
    Next I uploaded the course to Maestro using IE11 as my browser. The course opened properly when I previewed it from course record.  NO blank screen.
    I then went into Maestro using Chrome 36 as my browser ( which is what I routinely use) and created another course -- uploaded the same file for this course. The blank screen with the playbar appeared when I previewed the course from the course record.
    Still in the LMS with Chrome as the browser, I then went to the course that I had uploaded using IE11 as the browser -- got the blank screen again.  Does this confirm that the issue is related to Chrome 36 breaking all Captivate HTML5 content?

Maybe you are looking for

  • Send Smartforms Output as pdf Attachment in E-Mail

    Hi! I've searched quite a long time and tried to use different examples I've found in the forum but it doesn't work for me. I tried to do the following: Send output of smartforms by mail to a specified e-mail adress. Sometimes there have to be sent 2

  • Updating from 10.4.11

    I currently have a MacBookPro2,2 and I need to update my os. How updated can I get? Here are it's specs: Model Name: MacBook Pro 15"   Model Identifier: MacBookPro2,2   Processor Name: Intel Core 2 Duo   Processor Speed: 2.16 GHz   Number Of Processo

  • I am getting an error message when I try to combine three PDF files"Your PDF conversion request fail

    I am getting an error message when I try to combine three PDF files "Your PDF conversion request failed. Try again later"  Thank you, Lori Jans

  • h:messages rendering

    Hi all. Does anyone if <h:messages> can render output as a bulleted list? Or other ways of solving the problem. Ex. <ul><li>message1</li><li>message2</li><ul> setting the layout attribute to table render like: <tr><td><span class="messages">message1s

  • How to continue to read Object from a file?

    At some program I write an object into a file. This program will be called again and again so that there are many objects which are saved to that file. And I write another program to read object from this file. I can read the first object but can not