Sudden Multiple MBP problems

I have an early 2013 13inch Retina MBP with a 720GB SSD with Yosemite 10.10.1. It works very well. About a week ago my photos from Aperture that are copied to my iPhone 5 started to show random errors with photos missing and albums out of sequence. The MBP screensaver dropped the Aperture screensaver file and keeps reverting to the Apple default screensaver no matter how many times I reset the MBP screensaver. The disk utility has been run multiple times with this result
Invalid volume free block countFile system check exit code is 8.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I have completed this task multiple times with no success.
Icons are now missing from the lower tray.
I have deleted the previews form Aperture which gives me about 100GB of free space.
y next step is to try re-installing Yosemite; but the internet connection drops off about every 5 minutes; even though other devices on the same router remain connected..
Any ideas?
Thank you.

It is one wicked sub. Goes nicely with a pair of Tannoy CPA-5s to make a decent setup for "computer speakers"
Further testing has now showed that jumping hard on the floor near the G5 slightly shakes the desk, computer etc & recreates the problem! Somewhere there must be a dodgey connection...
I have the G5 on the floor with the two smaller FW800 disks stacked on top of it, and the 1TB disk sits on the floor beside the G5. I think some new firewire 800 cables could be in order, along with fitting the silly gold spikes to the subwoofer to try and isolate it better from the floor.
FW800 connectors don't seem to make such a tight & secure connection as FW400 ones - you don't have to pull very hard at all to disconnect them - it's a pity there's not a locking or screw-together version!
Luckily, my problems haven't so far resulted in any data loss, just plenty of annoyance & far more reboots than my G5 is used to.

Similar Messages

I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off. How do I fix this?

I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off. How do I fix this?

http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

I am running windows 8, 64 bit, & suddenly have a problem opening files, I have to keep re-booting

I am running windows 8, 64 bit, & suddenly have a problem opening files, I have to keep re-booting - is there anything in preferences I can change?

The clipboard error means that the OS or some other application messed up when placing data on the clipboard.
The reboot to open files means that something has gone wrong at the OS level (otherwise just relaunching Photoshop would work). We've heard from a few other users with that problem, but never heard back from them what was wrong with their system to cause that behavior. My guess is a bad driver or malware.

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

EA4500 - MBP Problem 802.11N / 802.11A

Hi Guys,
I've been using the EA4500 for almost a month now and I'm loving it. Fast & stable, but I noticed one problem. My Macbook Pro is not connecting via 802.11N but instead it is using the 802.11A.
screencapture:
I tried trouble shooting this by using my other router Linksys WRTt310n and I noticed that my MBP is conencting to the 802.11n. So basically it's not the an APPLE or MBP problem.
Is there any setting I should be checking out?
Thank you very much in advance.
PARC
Solved!
Go to Solution.

Hi hiptechboy,
You just made my day! after setting up the QoS and turning on the WMM. Look what just happened...
Thank you very much mate! But can you please explain what does WMM got to do with my connection problem with the 802.11N network?
Thank you very much again guys!
Parc

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Multiple Inheritance problem persists in Interfaces

Hi,
I tentatively made a program and found that multiple inheritance problem of C++ persists even with interfaces. Although this is definetely a special case but I want to know what is this problem known as( i know that this is perhaps known as diamond problem in C++). And is there a way out of this thing.
interface one
     int i=10;
interface two
     int i=20;
interface z extends one,two
public class xyz implements z
     public static void main(String [] a)
     System.out.println(i);
}O/P
D:\Education\Java\JavaStudyRoom\Applets>javac xyz.java
xyz.java:16: reference to i is ambiguous, both variable i in one and variable i
in two match
System.out.println(i);
*^*
*1 error*
Thanks for replying

suvojit168 wrote:
I tentatively made a program and found that multiple inheritance problem of C++ persists even with interfaces. Although this is definetely a special case but I want to know what is this problem known as( i know that this is perhaps known as diamond problem in C++). And is there a way out of this thing. This is not the so called diamond inheritance problem. What you have here is an ordinary name clash. And as has been noted you can resolve it by qualifying which constant you're referring to, like
System.out.println(one.i);
For the diamond inheritance problem to apply both the one and the two interfaces would need to inherit a common ancestor (that's how the diamond is formed). Furthermore the common anscestor would need to carry implementation which would then be inherited two ways, once via one and once via two. This is the diamond inheritance problem Java is avoiding by allowing single inheritance of implementation only.
P.S. My previous post was posted my mistake.

SP10 - multiple approver problem with CUP

We have SP10 (patch 1) in our development system and cannot move forward to production because of a real show stopper. I have currently reported this to SAP thru an OSS message (and it is in development) but would like to know if anyone else is having this issue with SP10. (this happened even before applying patch 1)
We have multiple approvers when creating NEW users or CHANGING users in CUP. We have it configured to allow just one of the approvers to approve before going on to the next stage. Since we put in SP10, CUP is requiring ALL approvers to approve the request before going on to the next stage. We get the following message when one of the approvers approve the request: Request no: 5020. is approved, pending for other Approvers.
I've seen this reported for UAR and SOD but not for CUP. In fact, there is a fix for UAR in Patch 1 of SP10. I applied this patch but it hasn't fixed the CUP issue. I also don't have the issue when rejecting a CUP request, or when approving it through the configuration --> Request --> Administration screen (what I consider the Back-door since only security administrators get the configuration area).
Thanks for your input.
Peggy

Christian,
I totally agree with you.
The good news is.... We installed SP11.1 and the multiple approver problem is fixed.
We have decided to leave our production system at SP8 until this system settles down a bit. Of course, this means we can't use many of the new fixes and features (such as UAR). We use our sandbox system to apply new support packs and do very rigorous testing. And our DEV system is at SP8 too.
Good Luck.
Peggy

L430 multiple driver problems (ultranav and others)

Hello,
I have multiple driver problems with my newly purchased L430.
1) After hibernate the UltraNav driver randomly stops working. This means that the settings are grayed out and my old settings aren't applied. Sometimes the mouse pad and track ball also stop working after hibernate.
2) The hardware mute button and hibernate don't like each other as well. After resuming from hibernate with the mute button on the sound doesn't work anymore. Rebooting only helps if you have disabled the mute before rebooting.
3) The intel usb 3.0 driver can't be installed unless you want a lot of bluescreens.
I do have the newest drivers and BIOS (2.54).

It's ok my friend, I just hope I will be able to help.
Now to the problem. The thing that worries me the most and the reason I asked you to contact a Lenovo Repair Center, is the blue screens with the Intel Usb 3.0 installation. If the driver is correct this should not happen and most of the times it signifies a pure hardware problem, not a software one. Really, it just should not happen, period!
So please, before anything else, download and boot with a Linux Live cd, any distro you like (e.g. Linux Mint, Fedora, etc). Better choose a 64bit version. It's one way of determining if you're facing a hardware problem with the usb 3.0 ports.
The information you give is very useful and more or less complete, but I would like to also know the model of your SSDs, both the 2.5'' and msata.
Meanwhile, you can check either with the Linux Live cd or with Memtest86+ your ram. This does not seem to be a memory problem but it would be nice if we could exclude it from the suspects list. Many - if not most - of these problems are multifactorial and we cannot leave anything to chance..
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

All of a sudden my MBP will not load Facebook using Safari. Loads ok with Firefox. Any ideas?

All of a sudden my MBP will not load Facebook using Safari. Loads ok with Firefox. Any ideas?

Hey aj5c,
Let's see if resetting Safari helps the issue:
Safari 6 (OS X Mountain Lion): Reset Safari
http://support.apple.com/kb/PH11914
For best results, make sure all of the options are checked.
Thanks,
Matt M.

I just installed lion and suddenly I have problems starting the computer

I installed lion on my mac a week ago (mac 20.5 inch) and suddenly I have problems starting the computes, sometimes, but lately almost always, it takes a long time to start up (more than 2 min) and then the keyboard does not work and the mouse works partially i.e. the cursor moves but does not respond to clicks, also, when I move the cursor over the dock it does not appear the tag with the application name I'm over, basically I can't do anything except reboot the hard way. After a few times it usually stops happening but I don't know why exactly. Sometimes after rebooting a message appears indicating that I restarted the computer after having a problem and asks me if I want to open all the applications that I had in the previous session (in this case none) when I say yes the problem keeps happening but when I say no the problem stops. To make thins even more difficult just now it didn't let me choose "cancel" because the keyboard and the mouse have the same problems I explained before.

Are they each separately paired with the computer via BT preferences?
You also can check your Startup Disk preferences by selecting your startup volume then clicking on Restart. Does this cause a faster restart?
You might also try booting into Safe Mode then booting normally. Safe mode takes considerably longer for startup and will require you enter your password.

Suddenly, I've been put on multiple threads over multiple firefox problems, which is filling up my inbox. How do I get out of these?

Details? I posted a question about one problem (for which no answers have been offered, but that's okay) and somehow, I've become part of multiple threads about various firefox problems. I have no interest in any of these questions/problems.
How do I get out of these threads? I get about 15-20 emails a day! Firefox is by far the worst community I've even been dragged into....

Sorry you are having problems.
Have a look at your settings in the dropdown from the username or https://support.mozilla.org/en-US/users/settings
Not too sure what you could subscribe to accidentally that causes that behaviour though.
It would be interesting to know what option caused all the email. If something has gone wrong and you are getting e-mails that you should not be getting we can refer this to the admins to look into. The Firefox sumo community certainly does not intentionally spam, and if you are having a problem lets find out more, because others may have a problem and not have reported it.

HT204400 Apple tv-had it for 3 years. no changes in anything. but suddenly there is"problem connecting to the internet". we have done ALL the above multiple times each.

oops...what is life span of Apple TV?

Nothing at all? Can't anyone help with this issue at all? I would be grateful for any suggstions as it is driving me crazy. It happens every time I open iTunes and also every time I open Mail.

Suddenly my MBP can't find my TC-airport anymore

Hello
I recently got a new MBP (13"). I immediately upgraded to SL with migrating files from my recent MBP on the Time-Machine-Backup on my Time Capsule.
Everything seemed to be fine. I later upgraded to 10.6.1 . That also didn't seem to cause trouble.
The only thing I noticed was, that since the SL-upgrade I was not able to deactivate airport for menubar nor System preferences. I thought that might be related to TM, TC and wake on airport, the new ability in SL. However I didn't pay much attention to it, as I am always online anyway.
Now I have been out with my MBP to internet café and I noticed, that I also can't connect to any of the provided open and free WLAN-networks there. A friend of mine with her Macbook and 10.4 could without any problems. I thought that might have been some settings issue or a permission issue. But wasn't able to solve it at that place. The "permission repair" delivers since the upgrade errors, which it can't obviously solve. But at home the connection was still possible.
Zugriffsrechte für „MacBook HD“ reparieren
Unerwartete Zugriffssteuerungsliste für „private/etc/apache2/users“ gefunden.
„private/etc/apache2/users“ repariert.
Unerwartete Zugriffssteuerungsliste für „private/etc/postfix/main.cf“ gefunden.
„private/etc/postfix/main.cf“ repariert.
Unerwartete Zugriffssteuerungsliste für „private/etc/postfix/main.cf.default“ gefunden.
„private/etc/postfix/main.cf.default“ repariert.
Warnung: Die SUID-Datei „System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent“ wurde geändert und wird nicht repariert.
Unerwartete Zugriffssteuerungsliste für „System/Library/Keychains/X509Anchors“ gefunden.
„System/Library/Keychains/X509Anchors“ repariert.
Warnung: Die SUID-Datei „System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum“ wurde geändert und wird nicht repariert.
Unerwartete Zugriffssteuerungsliste für „private/etc/hostconfig“ gefunden.
„private/etc/hostconfig“ repariert.
Reparatur der Zugriffsrechte abgeschlossen
Yesterday I took my MBP to office. It's a complete Mac office, except the router, which is from Telecom Germany (T-mobile mother company). I can't remember exactly, but I think I didn't work right from the beginning, but finally I could connect to the airport network there. The network was still stored in my network-prefs from my old MBP.
When I arrived home I had to testify that my home Airport-network even doesn't appear on my MBP.
As increase the security I mad it invisible at setup. So I connected via Ethernet-cable. And changed that setting. Didn't work.
I even couldn't connect by connecting manually by typing the networks name and password. I just says connection failed. This happened with all accounts and account-typs on my MBP.
I tried to connect with my old MBP, meanwhile with 10.6.0 too. No Problems there.
I started my new MBP from SL-DVD. Also no problems. I was able to manually connect to my MBP.
I found one workaround, but it only lasts for some minutes to a few hours. If I restart, and log in as Admin, then go to Network-Prefsand, change to automatic location, selct airport, choose options, select my airport-network from the preferred-network list, choose edit and reselect the WPA2, reenter the password. That seems most of the time to work. But lasts only a short time.
So my conclusion is, that it is not a TC, or MBP-Hardware issue. It is also not a SL 10.6 Problem.
I might by SL 10.6.1 or more likely a problem with my installation/settings. But what could it be ???

I have downgraded now to 10.6.0. It seems to be a little bit more stable now. It is my impression, that in some rooms in our flat the connection is unavailable as there are more than 20 WLANs ther. Maybe that's the reason. That would also give an explanation, why it suddenly got worse here. Maybe just another neighbor got his WLAN-Router from his ISP and now all channels are full.
I am using the n-standard with 5GHz with 24MBit/s and 100%. Is there any other thing I could do to stabilize my private airport-network.
By the way due to all this I managed at least to get rid of my permission failures thanks to CarbonCopyCloner and a fresh installation on an other disk.

Sudden Standby | MBP Late '08

Hi guys,
my MBP temporarily goes into standby every 10 minutes. It doesn't do that all the time but it tends to get worse. I brought it in to an AASP who, after a week of waiting, said it was all fine. Trying to work with it at home then the same issue came up again. I'm getting tired of this since I'm not able to get any work done this way.
If you got any idea or maybe even had the same problem one time I'd be more than glad to hear about your suggestion. Thank you soooo much in advance!
I tried to record a short video of it. Although the quality s** [filmed it with my cell phone, you better turn your speakers down ], it is probably good enough to illustrate what I'm talking about.
Here is the link: http://cl.ly/bdf76c2ba14369b1e03d

It seems like if I shut off the SMS (Sudden Motion Sensor) using the terminal, the problem about the sudden standby doesn't exist no more. Only the fans are still blowing at a speed of 6200 rpm.

Sudden Multiple MBP problems

Similar Messages

Maybe you are looking for