Sudden problem with lxde panel

im not sure what i did, but this problem seems to have popped up out of nowhere......when i start lxde, the panel keeps flashing, cant click on anything, wondering whats going on with it, if anyone knows

oni5115 wrote:
ssl6 wrote:
there was something in that thread about modifying a line in a config file, the orignal line is lxde --profile LXDE........which basically tells it to load a profile from ~/.config/something/something/LXDE. i wiped that folder rather than change the config, i think the folder was rebuilt with a new default profile, and i just reconfigured my settings
sorry i cant be more usefull at the moment. im not near the machine i have with LXDE
Wiping the config file and re-configuring seems to solve this problem. At least, once I fixed it I have not seen it come back again.
I did this also when I had problems with the menu not working and causing my panels to reset.
So far a great fix. Now panels are back to normal. I will edit if problem shows itself again.

Similar Messages

Problem with tabbed panel

I have a problem with tabbed panel...this panel has 3 columns, I copied to each of them a diffrent text (diffrent height)...I expected to obtain diffrent working area of column, for example 1st column-height 7500 px, 2nd-1500 px, 3rd-2500 px, but I received one height 7500 px, each column has been formatted to this size....below a text I have “empty space”- (it is a diffrence between working area and text area)...I put the text to the 1st column for example 7200 px height, empty space below this text is 300 px I received 7500 px of working area in this column, here the problem doesn`t exist but….2nd column i have height of text for example 1300 px, below this text i have 6200 px empty space...It should be height 1300 px of text and maybe 200 px of empty space...so the working area could have at 1500 px not 7500 px of height....I try to change it (to for example 1500 px) but it still return to the basic 7500 px height and can`t do it...The solution is to use another form like. the accordion form..but it is a row form….when you put a diffrent sized text (height) you will receive diffrent size of working area (height), you obtain 7200px text +300 px empty space=7500 working area in 1st row.. 1200 px text + 300 px empty space=1500 workin area px in 2nd row and 2500 working area px in 3rd row…everything is fine in this form…each row has been formatted to the different size of height…but I prefer to use a tabbed panel (column form) instead a accordion form.…I don`t to waste the time to correct the code in html text editor like PSPad…
Best Regards
Kamil

A couple of threads here that should answer your query.
http://forums.adobe.com/message/5080345
http://forums.adobe.com/message/5104253
Thanks,
Vinayak

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Sudden problem with iTunes quitting - problem and solution

This is a fairly lengthy diatribe but it was driving me nuts and so hopefully will help someone else:
The Problem:
I have an XPS M1710 running Windows Vista. A couple of days ago all Apple programs started to malfunction, specifically iTunes, QuickTime. When I try to start iTunes it quits immediately and I get the message “A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”. The same thing happens with Quicktime. When I go to Internet Explorer this works fine until I go to the Apple website and try to Download iTunes (to reinstall) or even to go to the Apple Support page, Then the Apple site seems to “force” IE to quit. The same thing happens when I use the Apple Safari Browser (works generally but quits on Apple iTunes or support site). I am not sure if it is relevant but we bought some iTunes songs online in the last couple of days using another laptop. That machine is still working fine as are two other laptops in the house re iTunes (they are Windows XP Dells, my machine is Windows Vista). I received an email receipt on my XPS for the purchases in the usual fashion. I can open it, but when I click the links to the iTunes site it doesn’t work (does work using other computers).
I have performed 2 system restores (to 2 and 4 weeks ago – long before the current problem) but this did not help. I have uninstalled iTunes – but even so still could not directly download the iTunes setup.exe from Apple. I did eventually get it from a third party link. Using the downloaded file I reinstalled iTunes but exactly the same problems persist. On one occasion I let the “A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available” dialogue box sit for a while – the system identified some Apple updates needed which I downloaded and installed (in fact I had done these probably a week or so ago anyway but the system restore would have reverted that). This still did not fix the problem.
Today I phoned XPS support. I was initially told to leave my number and someone would call me back. 2 hours later no-one had so I phoned again and got someone who suggested doing a full scan disk (ie by getting into diagnostics at startup by pressing F12). I did this – no problems found. The person had also suggested trying to access iTunes using a different logon account. I switch on “guest” account and tried from there but the same problem persisted.
I have checked Windows Defender and Windows Firewall and as far as I can see iTunes is allowed to access the internet. No sign that it is deliberately blocked. As far as I can tell from the Windows updater the system is up to date (as it was when the problem first happened, and not fixed by rolling back many updates via the system restores).
I have run a full Virus check using Kaspersky (with latest updated database) and nothing was found.
So, no matter what I try, my computer is suddenly blocking everything to do with iTunes (and Quicktime), including Apple’s own support site. The failure of iTunes or QuickTime to launch happens whether or not I am connected to the Internet at the time. All other programs seem to be working.
I would be very appreciative if you could help. I have been unable to find any online solution, although one person may have had a similar problem, no resolution was evident.
The solution:
I have only just now solved the problem (two weeks down the track). The Dell technician that I spoke to over the phone tried hard but we could not get the issue solved completely, although the problem with accessing the iTunes website we did solve by turning off some internet explorer add-ons. As it turned out the problem was with QuickTime. The clue was that although I had attempted to uninstall iTunes + Quicktime many times the QuickTime component never disappeared. So when I reinstalled iTunes + QuickTime (which I did many times) the problem remained. After again uninstalling iTunes + QuickTime (by going to control panel, selecting iTunes and uninstall, then QuickTime and unintstall in the usual way, and realising that QuickTime did not uninstall properly, I then selected QuickTime and chose the "repair" option at the top of the control panel dialogue box instead of uninstall. After that I was then able to open QuickTime properly, and then when I reinstalled iTunes it worked! This had been driving me nuts, and I was on the verge of re-installing the operating system. Can I suggest that you enter this solution into your database for future reference.

I was wondering if you ever fixed this problem? Today I went to open itunes and it started installing it and said it couldn't access the file ja.lproj/ea0423.rtf which would be the Japanese language version. I just wanted to know if I should do what was suggested to you or if that didn't work.

Problems with Query Panel with Table

Hi. I'm having a problems with this component in runtime. I'm using JDev 11.1.1.1 with ADFBC.
The query uses three optional parameters. When i put a value for the first and leave other blank and execute query, following error is produced:
03/11/2009 04:02:28 AM oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator handleError
GRAVE: Server Exception during PPR, #6
javax.el.ELException: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
     at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1282)
     at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:115)
I couldn't find any reference about this. Please help....
Thanks

Frank,
I am also getting the same error. The version I am using is 11g Release 1(11.1.1.2.0)
Here is what I did:
1. created a view criteria on a view object
2. all are optional
3. Dragged the view criteria as a query component (query panel with query table) on to the design layout
and the error when I clicked the Search button is:
javax.el.ELException: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
     at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1289)
     at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:115)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at sni.foundation.facesextensions.filters.FoundationFilter.doFilter(FoundationFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._clearFilterCriteriaRows(FacesCtrlSearchBinding.java:4549)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._addFilterCriteria(FacesCtrlSearchBinding.java:4603)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:423)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
Thanks
Venkatesh

Sudden problem with Flash Player right now?

Hello,
we're currently got a problem with our Flash video player suddenly stopped working, just this evening. We havent touched it anything in a few days, and now suddenly our player does not start. The debug-version of the player outputs this:
Warning: 'flash' has no property 'prototype'
Error #2046: The loaded file did not have a valid signature.
Failed to load RSL http://fpdownload.adobe.com/pub/swz/flex/4.0.0.10485/textLayout_4.0.0.10485.swz
Failing over to RSL textLayout_4.0.0.10485.swz
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Error #2046: The loaded file did not have a valid signature.
This player have been working perfectly fine for multiple browsers/OS'es/people the last week,and now suddenly this evening we suddenly get this problem, without any changs from our end (our player checksum matches the known file).
Any ideas, what is going on here?
Best regards
Johan

Hi, I just noticed your thread. There may be info on one of these forums. I have not seen any report of Flash Player issues here and I was on line late last night.
http://forums.adobe.com/community/flex
There are several forums listed there.
Thanks,
eidnolb

WS2012 Standard R2 with Essentials sudden problem with Server Manager, Essential Dashboard and other services

Hi all,
I have a problem with my Windows Server 2012 R2 with Essential installed. When I try to run Server Manager the server manager window doesn't appear and the same thing applies for starting the essentials dashboard. This leads to that some of the features doesn't
work properly like remote web access, client backup and so on. When I check the Services a lot of services haven't even started. Trying to manually start for example Windows Server Essentials Management Services gives me following error message:
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
What can be wrong here? I haven't done anything to the server that could start these problems. This started all of a sudden.
Thank you all in advance for any help.
EDIT:
I rebooted my server in safe mode and I tried to run SFC /Scannow which stops at 84% and gives me following message:
"Windows Resource Protection could not perform the requested operation."
I also tried to run "DISM.exe /Online /Cleanup-Image /RestoreHealth". This did not help either. It completes the operation but nothing changes. The problem is still there.
I thought that my server backups were OK and that this problem would be gone by restoring the C: drive with backup image. The problem is that all my good backups was rewritten with new backups that could not take backup of the C: drive for some reason. Now
I need to solve this problem without reinstalling the whole operating system.
EDIT:
I have also completed the chkdsk C: /r command and now the SFC /Scannow command can be completed, with notification that some files could not be fixed. I have attached the sfcdetail.txt file which points out that
"tsgclean.exe" cannot be repaired. What has that file to do with my WS2012 problems...
2015-01-04 03:12:54, Info CSI 00000477 [SR] Cannot repair member file [l:24{12}]"tsgclean.exe" of Microsoft-Windows-TSProxy-EdgeAdapter,
Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

Hi,
Did you remember any operation which you had done before this issue occurred? For examples, install any update,
install any third-party application or any other? Just a confirmation, thanks for your understanding.
For those problematic services, please open services’ Properties and navigate to
Dependencies tab, then check if all system components which this service depends on run as normal.
In addition, please open Event Viewer and check if find relevant events. Meanwhile, please follow the path:
%programdata%\Microsoft\Windows Server\Logs and check Dashboard log file if find more clues.
By the way, when you run
sfc /scannow command completely, did you open Server Manager or Dashboard again? Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hello Justin,
Regarding the third-party applications:
I have not installed any third-party application that could cause this problem. All my third-party applications that are installed on the WS2012 R2 are confirmed working well with the operative system and are installed at the time when I hadn't these problems.
I cannot say anything about windows update because that is something that I update once in a week after checking that no user is reporting any issues. I have learned my leason with windows update when I had Surface Pro 2, that was a dissaster.
Regarding the Windows Updates:
Anyway, I tried to remove all the windows updates before as well (not the security updates) down to 5th December which is the time when I know that my server worked well. Only two updates could not be removed (KB3012199 and KB2989647). I don't
know if these two updates can cause any problem?
Regarding the problematic services:
For example: Checking the properties for "Windows Server Essentials Management Service" -> It is dependable on
"1. Active Directory Domain Services" and "2. Windows Server Essentials Provider Registry Service".
No 1 is running but not no 2. If I try to start no 2 service it will give me the same message as before:
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
Regarding the Logs:
I have uploaded Dashboard log files which are created after 5th December to my dropbox account: Link
Regarding the SFC command:
Of course, when the SFC command was completed but with error that it could not repair
tsgclean.exe I tried to start the essentials dashboard and WS2012 server manager with no luck.
What about the error message? I looked up that file in the explorer and it is located in folder "C:\Windows\WinSxS\amd64_microsoft-windows-tsproxy-edgeadapter_31bf3856ad364e35_6.3.9600.16384_none_2ec8d374a0ac5606"
Why can't it be repaired and what kind of file is that?
Best regards

Sudden problem with fill layers

I use Adobe Photoshop Elements 11. Until recently, I've had no problem with fill layers. I'd make a selection from the photo, then I'd make a layer of the selection, then I'd go to edit, fill layer, fill with background/foreground color. Then the selection only would be filled. Now, all of a sudden, I make the selection, make a layer of the selection, go to edit/fill layer/fill with background/foreground color, and the whole photo becomes filled with the fill color, and not just the selection. I'm always on the selection layer, not the background or any other layer. I've reset all the tool defaults, and I've even deleted the defaults file, but to no avail. What's happening here? How do I fix this?
Thanks,
Sue

Sue and MichelB
MichelB
When I tried to help Sue with the inquiry, I was doing so based on what was written and my interpretation of it
then I'd go to edit, fill layer, fill with background/foreground color.
For me that Photoshop Elements 11 Full Editor, Edit Menu/Fill Layer and the issue did not fit.
But if the route were as you have suggested Photoshop Elements 11 Full Editor, Layer Menu/New Fill Layer/Solid Color then everything would fall into place, centering around that option in the New Layer dialog "Use Previous Layer to Create Clipping Mask" being checked or unchecked.
Sue
We look forward to your follow up.
Thank you both.
ATR

Problems with Application panel

Has anyone ran into problems with the Applications panel? I
using the Application panel to insert Bindings and Server
Behaviors. I can't get it to work. It says that I have a connection
and I'm able to see the tables and diplay recordsets. But I'm
unable to display multiple recordsets and insert data into a
database. I'm reading Dreamweaver 8 with ASP, Cold Fusion, and PHP:
Training from the Source. I've done what the book has told me. Any
ideas on what the problem could be?
The only thing different that I did from the book is how I
connect to a database. I have this on the top of each asp page.
<%@LANGUAGE="VBSCRIPT"%>
<%
Set MM_conn_newland_STRING = CreateObject("ADODB.Connection")
MM_conn_newland_STRING.ConnectionString =
"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=D:\website\newland\database\newland_tours.mdb;"
MM_conn_newland_STRING.Open
%>
The book uses a DSN and it has a seperate page for a
connection:
<%@LANGUAGE="VBSCRIPT"%>


Just want to assure, u said that u want to insert date from the form. Do u mean that u want to insert the date into mysql database. But it came out with the error. Am I right?

Problem with front panel USB connector

Motherboard: MS-6750
I have a problem with my front panel USB connector JUSB2 not working.
I have checked the connection to be sure that it is oriented correctly.
I also made sure that it was enabled in the BIOS.
Still no luck. There is not any voltage on this either.
I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
Any ideas on what this is and how I might trouble shoot the USB connector?

Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps Dok

Serious and Sudden Problem with Z10 NEED HELP PLEASE

I have a z10, one of the first that came out in Toronto (if it makes a
difference), a couple of hours ago I came across a serious and sudden
problem.
I was able to swipe left and right between pages of apps, even drop down
from the top, but I cannot open anything, not even make a call or settings
options.
Any time I try to, for a split second it looks like its about to load
something then nothing. (image slides to the right quickly and goes back on
every attempt)
So I first did a reset, same problem, then I did a battery pull (about 15 minutes) and problem presisted.
I tried through USB to do a backup on blackberry manager and perhaps do a
re-install of everything, however when I was prompted for the password of
my device on my PC it kept telling me it was an incorrect password (I use
this blackberry on my computer 4-7 days a week, twice a day sometimes for a
year and I have never miss typed my password nor have i changed it)
After trying everything to make sure the first letter maybe was upper/lower
case, even my other possible phone password, nothing worked..
On the 5th failed attempt my phone prompted me to type 'blackberry', which
i did, then i typed my password on my phone which i type in about 15 times
a day becuase I set my phone to a 5 minute lock and still said it was incorrect.... I am no on 9/10 attempts and lost
for options.
Please if anyone can give me any suggestions, or even how to backup my phone
and whipe it now, or I have an earlier backup form 4 months ago that I
wouldnt mind going back to in worst case scenario.
Thank you for your help in advance,
Solved!
Go to Solution.

Sorry, no I haven't experienced that. It could be from an app you downloaded but that's just a guess. Wiping the device will tell us a lot. If the device still doesn't work you'll want to reload the OS using BB Link. if it still doesn't work after that then warranty support will be necessary through Rogers.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Sudden problems with image behaviors, javascript on Yahoo servers

I have been posting my website with Yahoo Small Business for 10 years and have never had a server-side issue (to my knowledge). Until now.
It should first be pointed out that all my sites are basic HTML, constructed using Dreamweaver 8 on an old Sawtooth PowerMac that runs OS X.3.8. I am behind the times and know it.
I have a 2011 iMAC, but can't afford to upgrade my imaging software. If adobe cared anything about aspiring designers, they would come down to earth with the pricing (why should current students, educators and private business be given such a massive advantage in pricing?). Sorry, I'm just being truthful. I do not use style sheets (though it would be helpful to learn since the web is run by them now).
Recently, I completely redesigned my personal website. When I tested it on my old mac, everything functioned as desired. When tested on my new mac, everything functioned as desired. When viewed online after uploading to the server, the page appears to load in full, but none of the image behaviors work. Correction, the "mailto:" link works, but it was assigned in the property inspector rather than the behaviors inspector. So I have no rollovers and no operative links beyond email.
I sent the site files to a friend so he could check the site. He posted it to the server he uses and all the functions on the page work correctly. This is where I came to suspect that the problem is with the Yahoo servers and not my coding.
Here is the link to the page that does not work correctly:
http://www.boughnermultimedia.com
Here is the link to the page that does work correctly:
http://www.ericsearsandeyes.com/fboughner
In Safari, I checked the error console and the following message appears for all java script behaviors:
ReferenceError: Can't find variable:
If someone here could check my source code and let me know where Yahoo is having problems with my code, it would be greatly appreciated.
Thanks.

Your code is corrupted. If you view source in browser, you'll see your code is compressed into one long line. This will surely cause JavaScripts to fail.
Your friend's version works because the code is not compressed.
In DW, go to Edit > Preferences > Code Format >
Which Line Break Type are you using?
Nancy O.

Problem with Accordion Panels

Hi
I have an issue with Accordion Panels.
http://characteraday.businesscatalyst.com/guided.html
You can see in the link above that I have Accordion Panels on the right side that say open/close tip. The first one open and close and displays the tip. All the others do the same but when they open then push the one under it down. The first one does not do this and I like this a lot better. Any ideas how to make them all work the way the first one "Enter the Character's name" works.
Thanks for your time.

Modify the following line by adding the mark-up coloured red.
<div class="AccordionPanelContent"><span class="CollapsiblePanelContent"><img src="productimages/tinyimages/doorkitseat.jpg" width="50" height="50">The <strong>Door Insert Kit</strong> is a bathtub conversion kit. By removing a portion of the bathtub wall and inserting a door, an existing bathtub becomes accessible, retaining its use a a bathtub. <em><a href="doorkitandseat.html"><strong>More</strong></a></em></span></div>
I hope this helps.
Ben

What's problem with File Panel?

Hi All!
I'm web designer, while developing my site, my work is
breaking a problem with File management of DMX.
First, I develop site in DMX8 (ASP + SQL), then when I open
that site in DMXCS3 - Note: all file still in only one Folder in
HDD on (D\: Drive), (example: photo-editor.asp), this file content
is last time modify. And when I open again this file in DMX8 - the
file content of this file (photo-editor.asp) not same with new
version in DMXCS3. It is old version!.
I don't understand why that. (note: I don't check Enable
cache in Local info in Site Definition). Please help me about this
problem!
Thank for All!

Are both versions (DW8 and DWCS3) using the SAME local site?
Look in your
site definition in both versions of DW, and tell us what the
path is to the
local root folder, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"alonehero" <[email protected]> wrote in
message
news:fao4vg$n25$[email protected]..
> Hi All!
>
> I'm web designer, while developing my site, my work is
breaking a problem
> with
> File management of DMX.
>
> First, I develop site in DMX8 (ASP + SQL), then when I
open that site in
> DMXCS3 - Note: all file still in only one Folder in HDD
on (D\: Drive),
> (example: photo-editor.asp), this file content is last
time modify. And
> when I
> open again this file in DMX8 - the file content of this
file
> (photo-editor.asp)
> not same with new version in DMXCS3. It is old version!.
>
> I don't understand why that. (note: I don't check Enable
cache in Local
> info
> in Site Definition). Please help me about this problem!
>
> Thank for All!
>

Problem with File panel and Local files

I am having a couple of problem using Dreamweaver (which may be related) and can’t find any appropriate help on the web site.
I have created a small website and have it up and running.    I’m now trying to do some minor modifications.     But Dreamweaver seems to have lost the address of my local files on my home computer (although files are still there in the same place.)     In the on-line training material it shows how to define where the root directory is when you start developing a site, but I can’t find where these setting are so I can check and if nessessary amend them.   If I go to Define Site from the Site drop down options, this does not allow me to check or define the root directory.
Secondly, in the File panel (lower right on the screen) the address bar at the top only shows the remote files and the icons to the right (“put”, “get”, etc) have disappeared and I can’t seem to get them back.   Also that lower panel seems to be floating rather than being fixed like it was.     I have tried clicking on Classic View in the Workspace layout options but this doesn’t move things back to how they were when I first started using Dreamweaver (just a few weeks ago).
Can you offer any advice on what the problem is and how to manage it? Many thanks.   I'm using Dreamweaver CS4 and an iMac.

Immediately below the Tabs saying "Files" and Assets" is a small box
with arrow on the right to show the drop down list.        In the box
on the right there's an icon of two networked computers. Then it
says, "ftp://Hill farm Web Site" which is the name of my website.
If I click on the arrows to pull up the drop-down box, I get four
options divided by a line.   Above the line the options are Computer,
HD and ftp://Hill farm Web Site. Below the line it says manage sites.
Below this is list of files that make up my website in a directory
structure.   The header for the first column reads, "Local Files",
which appears to be untrue, because the top line in the directory
structure below reads, "ftp://Hill farm Web Site".
Does this help?
regards
David

Sudden problem with lxde panel

Similar Messages

Maybe you are looking for