Sudden problems using the media button
I have the latest version of iweb and the latest version of iphoto (6.0.5). I have created many web pages and sites, always using the media button to import photos into the new iweb pages. I did so yesterday.
Now, suddenly today when I try to open the media as usual I get a message that tells me to open iphoto 2 or Aperture 1.5 to be able to access my photos. When I check for updates of iphoto I get the message that I have the latest version, so I am really confused.
Has anyone else had this problem, and what do you suggest?
Thanks
Vivienne
Vivienne...
Problems with the iWeb Media Browser are commonly reported. Many people resort to dragging photos directly from iPhoto instead of using the Media Browser.
To see if your problem has an easy fix, do a Spotlight search for the iPhoto preference file called "com.apple.iPhoto.plist". When you find it, drag it to the trash and delete it. Also do a search for "com.apple.iLifeMediaBrowser.plist". If this file exists on your Mac, drag it to the trash and delete it also. Restart your Mac for good measure. Then open up iWeb and see if the Media Browser is back to normal.
Similar Messages
-
How can I use the media Buttons on my M40X with WinAmp?
Hello
Today I got my M40X and i have a question.
There are 5 media Button left of the keybord (CD/DVD, Play/pause, Stop, <-/->)
Is it possible to use them with WinAmp?
In the Toshiba Assist i got the CD/DVD button used to start WinAmp (by use him to start a .exe) but the Play/pause...dont work. In the field media Apps the only Player i can choose is Win MP10 (I hate this piece of sh*t).
How can I use these Button with WinAmp?Hello
As far as I know the Toshiba Controls were tested and designed only for Microsoft Media Player and WinDVD. How this topic says:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3621&messageID=11461#11461
I dont have any experience with WinAmp but I found useful info in this forum about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6673&messageID=24448#24448
Check this.
Bye -
My iPad suddenly started to show crazy colors. I turned it off. It would not reboot until I used the two-button reboot. Now it shows only green stripes. only for a few seconds and goes back to sleep. HELP!
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios
EExactly what settings are you using. Some go to iTunes.
-
I'm working on AE version 5.5 tutorial; the instructions in chapter 9 tell me to use the "fill" button located in the tools panel. problem is, it's not in the Tools panel. Any idea where to find the "fill" button?
why a duck wrote:
AE CS 5. the version of software is 5.5
When you hit Help>About, what version number does it say?
Could you show an image of the tutorial or link to it so we can see more clearly what it's asking you to do? -
Why does it say headphones when i use the volume buttons
why does it say headphones when i use the volume buttons instead of volume when the headphones are not plucked in?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
Hi
I recently downloaded the new Firefox (Firefox 4, I think - you can tell I'm very tech savvy!) and it constantly freezes, I can't do anything with it at all - I can't even close it from the icon in my Mac dock bar.
I have tried restarting my computer - though I have to turn it off by using the power button as as Firefox is open and totally unresponsive it won't let me shut down. About a minute after re-starting Firefox, restoring my tabs or starting afresh, it freezes again.
This is obviously very annoying and I'm not sure what I can do about it. Firefox is my preferred browser, and I'd really like to be able to use it again!This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6. -
<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/688252]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
== This happened
==
Every time Firefox opened
== two or three months ago
==
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdnu
*npdnupdater2
*Coupons, Inc. Coupon Printer DLL
*Coupons, Inc. Coupon Printer Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Shockwave Flash 10.0 r45
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*My Web Search Plugin Stub for 32-bit Windows
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization -
Using the radio button component to go to a frame on a MovieClip
hello,
I am using the radio button component in Flash with a continue button.
When the user clicks their option in the radio button and then clicks continue, I want it to go to a movieClips Specific frame.
Here is the breakdown and the script I have so far is below.
The radio group os named RadioButtonGroup
The instance names for each of the three options are noviceButton,intermediateButton,expertButton
My continue button has an instance name of continueButton
and my movie clip I am trying to target has an instance name of level_mc
here is my code so far:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
gotoAndStop (frameNumber);
the problem starts with my varFrame line-I don't know how to get it to go to the movieClip and gotoAndStop at a specific frame, based on which radio button was clicked and after the continue button is clicked.
Does anyone out there have any ideas?
thanks
babsuse:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
level_mc.gotoAndStop (frameNumber); -
Hi. I have not used Roxio Jam for quite a long time and I just wanted to make a few CDs. Jam used to work easily and well. I have a problem. I can't drag and drop iTunes music files anymore and, now I have to import music one song at a time by using the "+" or "-" buttons on the bottom. What is going on? I trashed the preferences file and restarted Jam to no avail. I also have selected that Jam should open files with iTunes in the Jam preferences. I have a G5 DP 2Ghz PPC machine with OS 10.4.11, iTunes 9.2.1 and Quicktime's version is 7.6.4. I have 2 GB of RAM and the machine has dual 1.25 Ghz. processors plus a 500 GB HD. Can anybody give me any suggestions?
Thanks in advance,
LarryI found an solution.
Uninstalling AirParrot as well as the two offending AirParrotDriver.kext and APExtFramebuffer.kext files in System>Library>Extensions was the fix. All problems disappeared. -
Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.
This problems has been occurring on two different machines over the last two days.I think this may not be a browser problem but rather a Google problem.
I am getting the same problem with the Google Chrome browser. -
I have a problem in the shutdown button iPhone
I have a problem in the shutdown button iPhone
the button irresponsiveEither visit an apple store or call 1-800-MY-APPLE. You can check your warranty status on your iPhone using the web address below, and as long as your phone is still under warranty, and has not sustained accidental damage (liquid, dropped, etc) then they'll fix it right up! Apple Store will fix it for you on the spot, you can mail it in to be fixed by calling tech support on the 800 number listed above.
https://selfsolve.apple.com -
Private Window allows previously visited pages to be seen using the Back button.
Private windows seem to be less private than non-Private windows:-
1) In a Private Window the Back button allows previously visited pages to be determined.
2) In a non-Private window Clear History removes previously visited pages (so that they aren't accessible using the Back button).
3) Clear History (Ctrl-Shift-Delete) isn't available in Private windows.This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
After last maverick update macbook pro can't be shut down anymore - only by using the power button
Hello!
I hope that someone can help: after the last Maverick update I can't shut down the computer anymore - or restart. I need to use the power button. Furthermore several apps don't close when they are supposed to be closed - I always have to check with Force Quit. I could live with that, but not being able to shut down or restart the Mac is more than tiresome. Can anybody help?These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Agents unable to perform Call Transfer using the shortcut button
Hello All,
We are facing this same issue for the last 3 days, any help will be truly appreciated.
Scenario : When customer calls in, Few agents are unable to do call transfer using the shortcut button on the CAD Interface. however when this fails they still can manually transfer the call by entering the number as a work around.
This is not happening for all agents and for those this is happening it happens intermittently. What could be the reason. please guide.This def sounds like an MTP issue.. Are you using software MTP or hardware MTP's on the gateways? I suggest using Software session on the gateways as it won't use DSP and will allow for much more the CUCM itself can support...
Pretty good chance this is the issue...
(Check RTMT and see if you are getting alerts about media resource group list exhausted)
Chad
Maybe you are looking for
-
Color Sampler not working outside my window! Urgent, please help!
I just installed Photoshop on my Surface Pro 3. I am doing a presentation in a few hours where I will need to be able to demonstrate the use of the Color Sampler outside the window. It doesn't work. It goes up to the edge of the workspace but does no
-
I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get
-
Process over BPM with message split: strange behavior
Hi everybody, introduction: We poll a file from a file-server and pass it to BPM. in BPM there is a multimapping. With each single message a WebService is called. Now we see that after a special amount of messages, each message is send (from BPM to W
-
Removing a song that isn't on the "iPod Selection" list - but its on iPod!
Firstly, let me say - I am a technocripple!! I don't know how I managed this one, but I am trying to delete a song from the iPod itself... However it is not listed in the "iPod Selection" playlist (or another playlist for that matter) the only time I
-
How do you convert a negative digital image to a positive?
When I scanned some of my slides they turned into negatives. How can I get them back to positive images?