Sudden problems with Exchange 2010

Hey folks,
my organization recently updated our Exchange server from 2003 to the 2010 version. After the upgrade, Exchange access via Mail, iCal and Address Book was at last possible; didn't work before for whatever reason.
Which is now the case again, after our admin updated the Exchange Firewall ("Threat Management Gateway 2010", I was told) and installed Service Pack 1 for the 2010 Exchange Server. He doesn't know if there were any settings changed which might have broke access through OSX apps, and I couldn't find explicit hints on what to look for in order to regain it.
Anybody here with similar problems?

The problem was a missing exception in the firewall. Up and working again.

Similar Messages

  • TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

    Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
    victor

    In reply to Macca7275
    We moved from Blackberry to iPhone for 120 services in 2010.  We have just renewed the iPhone fleet.  Security was the issue for the business that employs me (lawyers).  When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models.  The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here.  Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

  • Problem with Exchange 2010, Q10 and attachment

    Q10 & Exchange 2010; unable to download and forward attachment
    Hi all,
    i have a problem with Q10 phone, sync with Exchange 2010 with activesync (not BES) all seem ok but unable to download attach.
    When press "download" didnt start. Unable also to forward same message but i think is a chainde problem.
    Same message from desktop (outlook) or OWA is ok and attach downloadable.
    This is the only Q10 present in company for test so i cannot compare to others BB.
    All other users connected to the exchaneg server have iphone & ipad no issue result. Email service seem ok also for desktop.
    Firmware was updateted about 10 day ago.
    Any idea for me?
    Thanks

    Hi marcottt,
    Could you provide more detail please so I can better assist?
    Do you have this issue with all attachment types? If not, what type of attachment are you having this issue with and what size is the attachment?
    What happens when you try to forward the message? Is any error received?
    Does removing and re-adding the email account make any difference?
    I look forward to your response.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Problem with Exchange 2010 Public Folders after installing Exchange 2013 in my environment.

    I currently have an Exchange 2010 server with all the roles installed.  Before installing Exchange 2013, I was able to launch the Public Folder Management Console but now I get an error.  When I installed Exchange 2013, I got an error saying I
    had a instance of Exchange 2000 or Exchange 2003, but I didn't have any of these servers left.  There was still something in AD referencing my old server. I went into ADSIedit and deleted an old administrative group.  This deletion caused my access
    to my public folders to get messed up.  I followed this article, http://blog.bruteforcetech.com/archives/766, and I was able to gain access back in my outlook client but I still can't see the public folders in OWA.  I also get this error when
    trying to access either Default or System Public Folders.  "Cannot complete the operation because there isn't an available public folder database on server 'ExchangeServer'. It was running the command 'get-publicfolder - getchildren -identity '\'
    -server 'ExchangeServer' "
    My Public Folder Database exists and is mounted.  Any help is appreciated.

    Hi Belinda,
    Thank you for responding.  Yes you do understand my problem correctly.  One correction is that after deleting this entry in ADSIEdit, we couldn't access public folders at all either in Outlook or OWA.  I followed these steps in the below article:
     http://blog.bruteforcetech.com/archives/766
    After following these steps and recreating the entry on FolderHieachies in ADSI edit, I was able to gain access to the public folders again through Outlook, but still can't see them in OWA and can't access them in Public Folder Management Console.
    Here are the results to your requests:
    et-PublicFolder -Recurse | Format-List Name
    Name : IPM_SUBTREE
    Can't get the public folder database using legacy distinguished name '/O=HEROIX CORPORATION/OU=EXCHANGE ADMINISTRAT
    GROUP (FYDIBOHF23SPDLT)/CN=CONFIGURATION/CN=SERVERS/CN=EXCHANGE2010/CN=MICROSOFT PUBLIC MDB'.
        + CategoryInfo          : NotSpecified: (:) [Get-PublicFolder], TaskInvalidOperationException
        + FullyQualifiedErrorId : B546E0B0,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
    [PS] C:\Windows\system32>Get-PublicFolder -Identity \NON_IPM_SUBTREE -Recurse | Format-List Name
    Name : NON_IPM_SUBTREE
    Name : EFORMS REGISTRY
    Can't get the public folder database using legacy distinguished name '/O=HEROIX CORPORATION/OU=EXCHANGE ADMINISTRATIVE
    GROUP (FYDIBOHF23SPDLT)/CN=CONFIGURATION/CN=SERVERS/CN=EXCHANGE2010/CN=MICROSOFT PUBLIC MDB'.
        + CategoryInfo          : NotSpecified: (:) [Get-PublicFolder], TaskInvalidOperationException
        + FullyQualifiedErrorId : B546E0B0,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
    Also the msExchOwningPFTree attribute should be correct because this was edited with the correct value when I followed the instructions in the above article:
    CN=Public Folders,CN=Folder Hierarchies,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Heroix Corporation,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hero,DC=net

  • Problem with Exchange 2010 scripts after installing PowerShell 4.0

    Hi
    After installing new updates for MS Exchange 2010 and PowerShell 4.0 I've got problems with PS scripts using buil-in
    exchange commands.
    I wrote interactive script for searching e-mails. Here is a pice of code where I get error after installing PS v4.
    $SearchContent=Read-Host "Write sentence to find"
    Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Discovery Search Mailbox" -TargetFolder "Inner box" -LogOnly -Loglevel Full | Out-Null
    After installing PowerShell 4.0 I get that bug and report in TargetMailbox is not genereated.
    The property keyword isn't supported.
    At C:\Administration\Scripts\T-SearchMail.ps1:122 char:1
    + Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Disco ...
    + ~~~~~~~~~~~~~~~~~   
    + CategoryInfo          : InvalidArgument: (:) [], ParserException
        + FullyQualifiedErrorId : 35E6C841
    Using PowerShell 2.0 everything was ok.
    How to solve this problem?
    Tomasz
    Kind Regards Tomasz

    But http://blogs.msdn.com/b/powershell/archive/2013/10/25/windows-management-framework-4-0-is-now-available.aspx is dated
    October 2013, while the current Windows Management Framework 4.0 System Requirements section states:
    Servers that are running the following applications can now run WMF 4.0. The versions listed are the minimum releases required to run WMF 4.0.
    Microsoft Exchange Server 2013 Service Pack 1
    Microsoft Exchange Server 2010 SP3 with Update Rollup 5
    Since
    Update Rollup 5 For Exchange 2010 SP3 (KB2917508) was published Febrary 2014, shouldn't Exchange 2010 now be compatible with PowerShell 4.0?

  • POP3/IMAP problem with Exchange 2010

    Hi All,
    Iam running a  service which reads mails from mailbox via IMAP from exchange server 2003. But recently its been migrated to exchange 2010, and iam getting error from my service as "cannot connect to the server".It was working fine with exchange 2003.
    I have verified the IMAP connectivity from the following link: http://support.microsoft.com/kb/189326.IMAP connectitivity was successfull and then restarted the services but still no luck. Service writing logs in the eventviewer as "can not connect".
    Kindly help me on the same
    Thanks,
    Ram
    ram

    so, were you able to log into your mailbox on 2010 using telnet to port 143?

  • Unity 5.0 compatibility with Exchange 2010 SP2?

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

  • Limitations of SharePoint 2013 integration with Exchange 2010?

    Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
    versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

    I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature.  There is a Legacy Task Synchronization mode
    available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization.  It lets users manually sync specific task lists with Outlook.  But there is no task aggregation.  I found this
    whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
    http://www.microsoft.com/en-us/download/details.aspx?id=38799
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • FIM Service - Problems with Exchange Mail Listener

    I have a lab environment with Exchange 2010 (exchange) and FIM 2010 R2 (fimserver), both running on Windows Server 2008 R2 Std SP1. My problem is that the Exchange Mail Listener in the FIM Web Services is throwing exceptions and unable to poll
    or send mail. The exception is always "System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'."
    Versions:
    FIM Service: 4.1.3419.0
    Exchange 2010: 14.01.0218.013
    The FIM service is ran under a service account "Domain\fimservice", and has an Exchange 2010 mailbox
    [email protected]. The "Microsoft.ResourceManagement.Service.exe.config" is defined as following:
    <appSettings>
    <!-- Setup adds entries -->
    <add key="mailServer" value="https://exchange.domain.com/ews/exchange.asmx" />
    <add key="isExchange" value="1" />
    <add key="sendAsAddress" value="[email protected]" />
    <add key="synchronizationServerName" value="fimserver.domain.com" />
    </appSettings>
    On the FIMServer I can run IE under the FIMService account and successfully get to
    https://exchange.domain.com/ews/exchange.asmx without any certificate errors or authentication prompts. I can also access OWA and send and recieve mail from the fimservice account.
    Turning on additional logging on the web services I see the following messages:
    Microsoft.ResourceManagement Verbose: 0 : The Exchange Mail Listener is marking Microsoft Exchange "Read" messages as "Unread".
    ThreadId=11
    DateTime=2013-12-03T19:45:31.5391601Z
    Microsoft.ResourceManagement Verbose: 0 : The mail listener is looking for items that match this search expression: Find Item:
    (((((exists(ilmStatus) and (ilmStatus is equal to 'Read'))) and (((((((ItemClass is equal to 'IPM.Note.IdentityManagement.AddToGroups') or (ItemClass is equal to 'IPM.Note.IdentityManagement.RemoveFromGroups'))) or (ItemClass is equal to 'IPM.Note.IdentityManagement.ApprovalResponseApproved'))) or (ItemClass is equal to 'IPM.Note.IdentityManagement.ApprovalResponseRejected')))) and ((not(exists(ilmApprovalEndpoints)) or (
    ThreadId=11
    DateTime=2013-12-03T19:45:31.5470841Z
    Microsoft.ResourceManagement Error: 3 : System.Web.Services: System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
    The request failed with an empty response.
    at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
    at Microsoft.ResourceManagement.WebServices.Mail.Exchange.ExchangeServiceBinding.FindItem(FindItemType FindItem1)
    at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.<OnPollTimerExpired>b__0(Boolean findUnreadItems)
    at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.OnPollTimerExpired(Object state)
    Here is another instance:
    Microsoft.ResourceManagement Verbose: 0 : The Exchange Mail Binding is creating binding elements.
    ThreadId=14
    DateTime=2013-12-03T19:45:32.7624276Z
    Microsoft.ResourceManagement Error: 3 : System.Web.Services: System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
    The request failed with an empty response.
    at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
    at Microsoft.ResourceManagement.WebServices.Mail.Exchange.ExchangeServiceBinding.FindItem(FindItemType FindItem1)
    at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.<OnPollTimerExpired>b__0(Boolean findUnreadItems)
    at Microsoft.ResourceManagement.WebServices.Mail.Exchange.MailChannel.ExchangeMailChannelListener`1.ExchangeMailListener.OnPollTimerExpired(Object state)
    ThreadId=4
    DateTime=2013-12-03T19:45:32.7644086Z
    Any suggestions?

    David,
    Thanks for the suggestion. The account didn't have any e-mails. I eventually found the issue was with the exchange server itself and not related at all to FIM. Even though I could access OWA and the EWS asmx page the product wasn't fully functional due to
    a missing DLL from another .NET update. So I thought exchange was working properly, but it wasn't.
    After installing this
    hotfix (KB2637518) on the exchange box, the product was working and therefore FIM was working as expected. 
    More details can read on this
    technet blog, (at the very bottom labelled UPDATE)

  • Mail for Exchange incompatible with Exchange 2010

    MfE is incompatible with Exchange 2010.
    There seems to be a difference in the EAS protocol used.
    This causes synchonisation to fail when syncing the calendar.
    If anyone has a workaround please let me know and Nokia please fix this issue?
    Solved!
    Go to Solution.

    Hi there,
    just installed Mail4Exchange (3.00.050) from the ovi store on my Nokia e71.
    Unfortunately it doesn't seem to sync anymore with my google apps account. Anybody else encountering this problem? I get a message every other second that there seems to be a sync problem and that i should contact my admin if this stays on.
    It worked perfectly with the older version though.
    Thanks for any advice.
    Regards,
    JohnnyT76

  • Z10 with Exchange 2010 Activesync missing incoming messages

    Z10 with Exchange 2010 Activesync won't download all messages, missing messages include messages sent to internal Exchange distribution groups and bulk email (I could live with this one, lol) Activesync works fine on iOS and android devices (100+ devices in my organization with no issues). Tried enabling secure IMAP on the exchange server, and with this config the messages are delivered, but the body of the same messages missing with the activesync setup have a [No body found] in the message body and are otherwise blank. Tried running the EAVT tool and it returns "Nothing was found for provided credentials" . My personal Gmail account works fine on the phone, tried loading the 10.1 Blackberry OS and had the same problem. Tried setting up the account multiple times, used both autodiscover and manual setup to no avail. Any thoughts? Thanks in advance for your help!

    Hey cyberayk,
    Welcome to the BlackBerry® Support Community Forums.
    Do these email messages get redirected to a different folder on the Exchange Server?  If yes, On the BlackBerry smartphone go to Settings > Accounts> Select the account> Edit Folder Settings, are these folders selected? 
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Calendar fails to sync with Exchange 2010

    I frequently encounter issues with Calendar (iCal) not synchronizing with Exchange 2010.  I get the ! error triangle beside the account and it will attempt to "revert to server" or "try again" but ultimately failes.  After several attempts, I finally got this message:
    I am only assuming this is a persistent issue but not sure why all of a sudden my email address would return as invalid.  Anyone else see this and is there a work-around?
    Thanks

    Hi and Welcome to the Community!
    Can you expand on that please? As in, what exactly, tells you it doesn't sync anymore? Did you re-configure the Desktop Software? If so, what did that present? If not, well, you need to since you've changed your Desktop Organizer app...
    Let us know.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with exchange on my Iphone6

    I have tryed everything possible but still problem with Exchange on my Iphone6.

    What problem? You need to provide more information in order for us to help you.

  • Exchange 2013 DLP with Exchange 2010 mailboxes

    Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality.
    There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in my environment and route email through it to make use of the DLP ?
    Current environment consists of Exchange 2010 DAG, Casarray and hub transport servers, and Exchange 2007 mailbox servers, CAS and hub transports. Mail to the internet is sent to a smarthost.
    Thank you.

    Hi Maria,
    DLP Policies are actually a specific transport rule. Since the transport rules with Exchange 2010 didn’t provide such feature to monitor and check the e-mail
    content, I am afraid, in theory, it’s not possible.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Cisco Unity Connection Single inbox with Exchange 2010

    I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
    TAC says its a blocked port on Exchange TCP 7080 but that is open.

      I followed this document :
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
    but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
    do you have Step by Step more clear than that link becouse my lab very close to your case.
    Regards

Maybe you are looking for