Sudden problems with importing/editing audio files

I podcast my lectures, which run about 1 hr 15 mins. My SOP was to drag and drop an mp3 or AAC version of the original audio capture into Garageband and then split the file into two separate podcast episodes. Since the big Apple Software upgrade, however, this procedure doesn't seem to work. The file imports and plays, but I can no longer split it into multiple regions (it also shows a flat line for the entire track). Any ideas?

I am having the same problem. Looking for a fix and will post as soon as possible. This all happened after the new software update.
M

Similar Messages

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Problems with imported mono audio with stereo HD video FCE4

This is with Final Cut Express 4.
So here is what I am doing: I am recording video of my flight lessons inside my airplane with a mounted Panasonic HDC-TM90 HD camera. Since it is noisy inside the plane, I am using an Olympus VN-4100PC digital voice recorder to pick up the Air Traffic Control and Intercom within the airplane (between me and my instructor) which is 22 KHZ mono. I am doing this because I want the sound of the airplane and also the communication so everything works together and you get the best of both worlds (otherwise you would hear one or the other and that's pretty boring). Ok, enough with the intro.
Here is what I am having problems with -- when I get the video, stereo audio with the video and the mono audio all lined up in FCE in my timeline, it starts to get out of sync about 10 minutes or so into the film. And it gets worse as the film goes on. This is driving me nuts and I have NO idea out to fix it.
The only thing I can think of is that my Digital Voice Recorder is recording at a slightly faster speed than the camera's audio and this is why it gets out of whack.
Does anyone have any suggestions on how to fix this? Or at least give me an explanation why it is happening?
Thanks for any help!!

Thanks for the reply. I did this and it still doesn't seem to be matching up properly. Tell me if maybe I missed something.
1. I took the original .WAV file from my Digital Recorder and imported it into iTunes and then converted it into an .AIFF.
2. I took the .AIFF file and imported it into MPEG Streamclip and exported it as another .AIFF file that was Stereo and 48kHz.
Is there a step I missed?

Quality issue with importing edited audio from Adobe Audition CS6 to Articulate 09

I have edited an audio file using Adobe Audition CS6 and the playback sounds fine. I then import the edited file into Articulate'09 and the audio sounds horrible, very tinny and not useable. Does anyone have any suggestions on how to fix this issue? I have tried saving the audio files as mp3 and wav to see if that would help and it did not make a difference.

SharonL65 wrote:
I have edited an audio file using Adobe Audition CS6 and the playback sounds fine. I then import the edited file into Articulate'09 and the audio sounds horrible, very tinny and not useable.
I checked - it certainly supports both formats, but you'd have to be a lot more specific about what's wrong, because 'sounds horrible' doesn't convey anything meaningful at all, I'm afraid. And we have no idea of the format you are using - it's very possible that if it's being resampled on the way in by the operating system. If that's the case you have to find out specifically what formats (in terms of bit depth and sample rate) that this software actually supports.
Bottom line is that I'm afraid that this isn't very likely to be an Audition problem at all - you may get a more detailed and meaningful response from Articulate themselves.

Problems with import of static files/images

I have a series of static files (such as jquery/jquery ui libraries) that we have been storing in WORKSPACE_IMAGES. We had hoped to be able to export the static files and use our automated build process to import the files via sqlplus. However, I have run into problems with the files being "corrupted"...either they don't show up at all in firebug, or one file contains parts of another file, rendering it useless. If I delete these files and re-upload them separately through the builder, then I don't have any problems.
I can only assume there is some perhaps special character or some other issue that I'm not aware of either during the export process or the import process.
My first preference would be to store these files on the app server, but unfortunately that's not on the table at the moment.
Any ideas what would be causing the issues here?
Any help would be appreciated.
Thanks in advance
Jeff

Hello all,
This is an old thread, but it's an old problem that I'm concerned may still be continuing.
We're moving from 3.2 to 4.1. While copying our applications from 3.2 to a test 4.1 installation, we did a static file export for "All static files" from 3.2 and did an import to 4.1. We're seeing the same behavior that I and others have reported in the past - any static files that are javascript are corrupted when "all static files" was chosen. Exporting/importing each javascript static file individually appears to work fine.
If the bug was in 3.2 in that it was generating a corrupted export file when "all static files" is chosen, then I'm not concerned - we're moving from 3.2 anyway. But, if the issue is in the import then it must still exist in 4.1 and that would be a concern.
Does anyone know if this was a recognized bug in 3.2 and has since been corrected?
Thanks!
John

Problem with importing a AVI file

Hi everyone,
I did a capture to hard drive of a VHS home movie via Turtle Beach PCI card software, saving as .avi file that is roughly 2 hrs long, when I import into Premier Pro CS3, I only see the first 2 minutes. Anyone have a suggestions on what I can do to.
Thanks,
George

George,
I just finished a project, similar to yours and used the same hardware, TB PCI, and their software for the Capture. In my case, I chose AVI uncompressed and every file Imported into Premiere fine. Do you recall which CODEC you selected in the TB software. The only problem with AVI uncompressed is very, very large file sizes and I had 32 VHS tapes, some EP and some LP.
Quite a few folk on this forum have had excellent results with the Canopus products, but I already had the TB, so I did not change.
If G-Spot throws a fit, then you probably have a corrupt file. I assume that G-Spot installed OK, and the errors were with your AVI file. If not, try install again with all AV, Spyware, etc. software turned off. Try to Capture again with AVI uncompressed and see if your result is different.
Hunt

Problem with importing a dmp file

Hello,
I am trying to import a dmp file to make an excercise.
I've tried and read manuals all day now, but it seems I still do something wrong
First, In the Enterprise Manager console, I create a new user (CREATE LIKE scott):
<img src="http://users.skynet.be/wouterjans/orcl/oracle03.JPG">
Then I create a new Table: dummy with 2 fields: A en B (varchar2 and size10)
<img src="http://users.skynet.be/wouterjans/orcl/oracle04.JPG">
After that, grant dba to the new user
grant dba to DEMO;Then I Run CMD and go to the c:\oracle\ora92\BIN folder
<img src="http://users.skynet.be/wouterjans/orcl/oracle01.JPG">
I import the dmp file (STAG3536.dmp)
and it says it succeed
<img src="http://users.skynet.be/wouterjans/orcl/oracle02.JPG">
So normally its ok
Then I go to my Form builder and I open a new Form
When I try to run the data wizard now. I only see the "dummy" record I created before but I dont see the database from my imported file.
<img src="http://users.skynet.be/wouterjans/orcl/oracle05.JPG">
Could anyone help me pls ??
Thanks in advance,
Wouter
Message was edited by:
wouter81

dont go in bin directory you can run imp cmd from any where
if you want to import in scott scheme
you do this
connect system/password@dbname
list of contents = n
import grant = y
import table= y
import entire export file = n
user = scott
check to this i hope you will success.
Rgds

Problems with Import a excel file?

Folks,
I created a form to upload a excel file, the upload works fine , but I have a problem with the first line of the excel file. I created a model with the column names, the headers. When I uploaded this excel file to a folder inside my CF server, the first line is inserted in my DB, how fix this problem?
Tks
Fabiano Magno Pechibella

You've said you have a problem. You haven't said what the problem is.

Sudden problem with importing tiff files with alpha channel (CS5)

OK this is driving me nuts. For years I have been importing image files that have an alpha channel into FCP as.tiff files. I use Photoshop files only when I want to use the layers as they are too cumbersome otherwise). I have recent upgraded Photoshop, etc. to CS5 and now FCP won't import them anymore. I get a message saying: "File error: 1 file(s) recognized, 0 access denied, 1 unknown"
I am not doing anything different and tiff files created in just the same way in an earlier version of Photoshop import and work just fine. Is this a CS5 bug? Does anyone know of a work around. I want to keep using tiff files as they seem to work best for me with alpha channel work (and I don't see why I need to reinvent the wheel).
Thanks
A

I've had a similar issue recently. Same TIFF files downloaded from the same server, different FCP project, new error. I either see"File error: 1 file(s) recognized, 0 access denied, 1 unknown" or I get the even stranger, "Unrecognized file type."
I can open them in PS and save them again as TIF, same results. I know these are not CMYK files but even if resave the TIF as RGB, I get the same results, they are not recognized by FCP.
But if I open them in PS and save them as PNG with alpha, they improt fine.
I have no idea what's going on.
bogiesan
Message was edited by: David Bogie Chq-1

Problem with importing a scrolling file

Hello, I hope you could help me because i am really stuck
into it:
I have a scroll file, taken from a tutorial, which is linked
to a class. After having customized my file I did try it and it
works fine. The problem is starting when I try to import this file
to an empty MCL in my website. When I have imported all the
elements they do not respond and act like single pieces (es. the
scroll bar is detached from the scroller). What can I do? I am
attaching all the codes and I hope you can help me .
Googling around i found the element that I think it is the
reason I cannot import a proper classed swf.
The function is Event.ADDED_TO_STAGE. the only major thing is
that I do not know how to change my loader class to contain this
missing bit.
thank you so much
p.s all the classes and the file are in the same
directory

I get this code when I preview the fiel I hope that is what
you meant:
openHandler: [Event type="open" bubbles=false
cancelable=false eventPhase=2]
progressHandler: bytesLoaded=0 bytesTotal=896446
progressHandler: bytesLoaded=65536 bytesTotal=896446
progressHandler: bytesLoaded=131072 bytesTotal=896446
progressHandler: bytesLoaded=196608 bytesTotal=896446
progressHandler: bytesLoaded=262144 bytesTotal=896446
progressHandler: bytesLoaded=327680 bytesTotal=896446
progressHandler: bytesLoaded=393216 bytesTotal=896446
progressHandler: bytesLoaded=458752 bytesTotal=896446
progressHandler: bytesLoaded=524288 bytesTotal=896446
progressHandler: bytesLoaded=589824 bytesTotal=896446
progressHandler: bytesLoaded=655360 bytesTotal=896446
progressHandler: bytesLoaded=720896 bytesTotal=896446
progressHandler: bytesLoaded=786432 bytesTotal=896446
progressHandler: bytesLoaded=851968 bytesTotal=896446
progressHandler: bytesLoaded=896446 bytesTotal=896446
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at Scrollbar$iinit()
at
flash.display::Sprite/flash.display:Sprite::constructChildren()
at flash.display::Sprite$iinit()
at flash.display::MovieClip$iinit()
at tee_fla::MainTimeline$iinit()
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at tee_fla::MainTimeline/tee_fla::frame1()
initHandler: [Event type="init" bubbles=false
cancelable=false eventPhase=2]
httpStatusHandler: [HTTPStatusEvent type="httpStatus"
bubbles=false cancelable=false eventPhase=2 status=0]
completeHandler: [Event type="complete" bubbles=false
cancelable=false eventPhase=2]
[object Stage]
thank you so much

Sudden problems with importing

LR 3.6 has worked OK before, but now stopped importing photos (jpeg and raw) from my cameras (Canon 5D Mk 3, Canon Powershot 100). Program goes to "does not answer" - status and must be closed. The problem seems to be similar in my Elements 8. Importing from my Canon G10, LR says that there is not preview available, but importing succeeds. All cameras import photos to Windows (7) or Picasa normally.
System:
Lightroom version: 3.6 [795620]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 4
Processor speed: 2,6 GHz
Built-in memory: 8183,0 MB
Real memory available to Lightroom: 8183,0 MB
Real memory used by Lightroom: 412,4 MB (5,0%)
Virtual memory used by Lightroom: 410,4 MB
Memory cache size: 354,2 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1680x1050

Thanks. Importing from a card reader or from the camera works in Windows. Is seems to work also from the card reader in LR. LR recognizes all the cameras, but photos only from G10 and without previews.
The camera brand cannot be the explanation, because importing has worked OK before this (for years in LR 2). I am reluctant to accept, that I cannot import photos to LR directly from the camera.
Is it possible, that some importing settings are in wrong position or somehow corrupted?

Problems with JMF and audio files.

Sofware:
Java Version 1.5.0_03
JMF Version 2.1.1e
Windows XP SP2
I have a application that consists of 2 parts. The first is an editor for creating exercises, like multiple-choice, matching and so on. The second part is a “client”, used to solve the exercises. The client uses Java Webstart.
When I include audio clips in the exercises they play just fine using the client, but in the editor program I just get a clicking sound, and then the application stops responding.
The strange part is that the editor and client use the exact same code to playback audio clips.
The old version of the editor (developed for Java 1.3.x) works just fine under Java 1.3.x, but when the same byte-code is launched under Java 1.5 I get the same problem (clicking sound and then the application stops responding).
Any suggestions?

When installing JMF, two new packages are stored in the jre\lib\ext folder : jmf.jar and sound.jar.
Sound.jar contains the same api that are in the packages sound.midi and sound sampled contained in jre.
Maybe these new api are an improved version but i noticed some trouble playing sound and i delete sound.jar file, now it works fine.
Try this, maybe you had the same problem.

Problem with import of AVi file

I have bought a cheap video camera Creative Vado. I can copy film file in AVI to my computer . I can see the file, but I can`t import it in iMovie. Can someone help me - I will be greatful!

first rule of using a forum: read recent topics !
http://forum.java.sun.com/thread.jspa?threadID=668488&tstart=0

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Sudden problems with importing/editing audio files

Similar Messages

Maybe you are looking for