Sudden System freeze
Could anybody help?
System based on MSI K8N Neo4 Platinum , latest BIOS, 2 Gb Kingston VR (4 512 modules), Athlon 64 3800+ dual core, XFX Nvidia 6800GS PCIe, Sound Blaster X-Fi, and some other PCI cards. OS: Win Xp 64 bit ed.
The problem is as follows:
The system freezes while gaming or while watching video. But this only happens with some games (latest games, but not all) and not always... evry 2 or three days or even every fortnight. However it has happened twice in the same afternoon.
I have changed the components except the PSU (levicom 420W - 20 pin connector). Is thisd a reason for the problem? The mobo admits the ATX1 connector (24 pin). Do I have a lack of power?
On the other hand, checking BIOS, I see that AUTO memory settings, adjust CL to 2.5. My mem is 3. WEIRD
Are there any other settings to be changed?
Is this connected with the same problem? Voltage is correct.
I'd appreciate some help.
By the way, is there a BIOS TUT for this motherboard? not just the official mobo manual ???
Thanks
No tutorial. Sorry Laddie. The MB makers don't see the need to include one when they expect if you can build a rig you can fend for yourself. I used to get upset about this as well but I have yet to see inything really good from any of the makers in over 20 years...
As for the freeze you may want to get the appropriate memory settings for Timing and VDimm and manually edit those into the Bios settings. That is always a good first place to start. Use Memtest86 to test and see that the memory settings and modules are OK.
Is this a clean install of Windows? If not you may want to considure that as well.
Similar Messages
-
Suddenly my kernel panics or system freezes after loging in
My new MBP worked fine for about a month. Then, 2 days earlier it longer shutdown times than normally. But everything was still working. Suddenly I couldn't view flashvideos in firefox although I heard the audio. Then I got beachballs when trying to look into my emails (with "Mail") and couldn't start *.mov-files with Quicktime. Then I also got beachballs when I selected files in the Finder. After a while these beachballs disappeared (but they kept coming back). At this I time I already had some kernel panics.
After repairing permissions with the harddsik utility-program I got kernel panics one after the other and now I can only startup in Safe-mode, since everytime I log myself in the system freezes or a kernel panic starts the MBP new.
Does anyone have any ideas?
Here is the latest Kernel-Log:
Fri Sep 7 01:10:39 2012
panic(cpu 0 caller 0x2ceabf): Kernel trap at 0x00646192, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000104, CR3: 0x5af11000, CR4: 0x00040668
EAX: 0x15c7e740, EBX: 0x0061ea18, ECX: 0x00000000, EDX: 0x15675660
CR2: 0x00000104, EBP: 0x8cb63da8, ESI: 0x15675660, EDI: 0x195fdc60
EFL: 0x00010282, EIP: 0x00646192, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x8cb63bf8 : 0x2203de (0x6b031c 0x8cb63c18 0x229fb0 0x0)
0x8cb63c28 : 0x2ceabf (0x6bd430 0x646192 0xe 0x6bd3d9)
0x8cb63cd8 : 0x2e5564 (0x8cb63d00 0x8cb63ce8 0x8cb63cf8 0x153081e0)
0x8cb63cf8 : 0x646192 (0xe 0x6750048 0x8cb60010 0x240010)
0x8cb63da8 : 0x64752b (0x186db600 0x15675660 0x8cb63dc8 0x609a59)
0x8cb63dc8 : 0x649b11 (0x186db600 0x718ac4 0x8cb63de8 0x18fd3cc0)
0x8cb63de8 : 0x64b8a8 (0x186db600 0x18fd3cc0 0x718ac4 0x61bae0)
0x8cb63e38 : 0x64d9cc (0x186db600 0x18fd3cc0 0x0 0x6414c0)
0x8cb63e68 : 0x64db15 (0x18fd3cc0 0x4 0x0 0x19935468)
0x8cb63e88 : 0x682407 (0x18fd3cc0 0x881a90 0x8cb63ec8 0x218233)
0x8cb63ea8 : 0x2a57cf (0x15262650 0x19935468 0x8cb63ec8 0x211620)
0x8cb63ed8 : 0x222db6 (0x19935440 0x188f0c90 0x8cb63f0c 0x2c3f24)
0x8cb63f08 : 0x214063 (0x19935400 0x197ed420 0x15262650 0x19935400)
0x8cb63f48 : 0x21b25b (0x19935400 0x0 0x0 0x0)
0x8cb63f98 : 0x2b7bb7 (0x17cef1d4 0x7fff 0x17cef204 0x8)
0x8cb63fc8 : 0x2e60c7 (0x17cef1d0 0x0 0x10 0x155845d0)
BSD process name corresponding to current thread: Finder
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:15:02 PDT 2012; root:xnu-1699.31.2~1/RELEASE_I386
Kernel UUID: 0ADC53B3-E3CC-3BB4-9A24-0DEDE0B05946
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 26413354495
last loaded kext at 10428680302: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0x8f9f5000, size 28672)
loaded kexts:
com.aladdin.kext.aksfridge 1.0.2
com.nvidia.CUDA 1.1.0
com.paceap.kext.pacesupport.snowleopard 5.7.2b8
com.sony.driver.sxsus10drivers 1.0.1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.7f2
com.apple.driver.AGPM 100.12.69
com.apple.driver.ApplePlatformEnabler 2.0.5d3
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.GeForce 7.2.8
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.3f13
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD4000Graphics 7.2.8
com.apple.driver.AppleHDA 2.2.3f13
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleMikeyDriver 2.2.3f13
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.32
com.apple.driver.ApplePolicyControl 3.1.32
com.apple.driver.AirPort.Brcm4331 560.7.21
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.2.8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.0.4
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.0.8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 5.0.7
com.apple.driver.AppleUSBXHCI 1.0.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.nvidia.nv50hal 7.2.8
com.apple.driver.DspFuncLib 2.2.3f13
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.nvidia.nvGK100hal 7.2.8
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.driver.AppleHDAController 2.2.3f13
com.apple.iokit.IOHDAFamily 2.2.3f13
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.1.32
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nvGF100hal 7.2.8
com.apple.NVDAResman 7.2.8
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.7f2
com.apple.iokit.IOBluetoothFamily 4.0.7f2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleThunderboltDPInAdapter 1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.0.7
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4I kicked out all the kexts, and I still can boot into safe mode, but still I get KPs after loging in into normal boot up.
It looks like it always stops at this AppleHWSensor kext- does anybody know anything about it?
Interval Since Last Panic Report: 21261 sec
Panics Since Last Report: 10
Anonymous UUID: 1F15B692-1D82-4EEA-BADB-75D17BE606D8
Fri Sep 7 08:45:07 2012
panic(cpu 0 caller 0x2cf3cc): "Kernel trap with 64-bit state trapno:0xd, err:0x0, " "registers:\n" "CR0: 0x80010033, CR2: 0x0f1a9868, CR3: 0x42a4b000, CR4: 0x00040668\n" "RAX: 0x0000000000000007, RBX: 0x0000000000000001, RCX: 0x0000000017350580, RDX: 0x0000000000000000\n" "RSP: 0x00000000a3003f1c, RBP: 0x00000000a3003f38, RSI: 0x0000000017350580, RDI: 0x0000000000000000\n" "R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x000000010f28a168\n" "R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0x00007fbbc2308dd0, R15: 0x00007fbbc2306fe0\n" "RFL: 0x0000000000010046, RIP: 0x00000000002e3437, CR2: 0x000000010f1a9868\n"@/SourceCache/xnu/xnu-1699.31.2/osfmk/i386/trap_native.c:2 44
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0xa3003ba8 : 0x2203de (0x6b031c 0xa3003bc8 0x229fb0 0x0)
0xa3003bd8 : 0x2cf3cc (0x6bd718 0x6bd53e 0xd 0x0)
0xa3003d48 : 0x2ce4ff (0xa3003e20 0x0 0x6bd53e 0x0)
0xa3003df8 : 0x2e5564 (0xa3003e20 0xa3003e08 0xa3003e18 0x16bec244)
0xa3003e18 : 0x0 (0xf 0x0 0x0 0x17350580)
0xa3003f38 : 0x2bccc4 (0x192e17f0 0x192e17f0 0x183bfb01 0x5)
0xa3003f68 : 0x2ce2fb (0x17243000 0x192e17f0 0xa3003fa8 0x22ee1a)
0xa3003fc8 : 0x2e5489 (0x18f13f90 0x0 0x10 0x17606e10)
BSD process name corresponding to current thread: fontd
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:15:02 PDT 2012; root:xnu-1699.31.2~1/RELEASE_I386
Kernel UUID: 0ADC53B3-E3CC-3BB4-9A24-0DEDE0B05946
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 21871479621
last loaded kext at 10057095918: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0x2824000, size 28672)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.3f13
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.3f13
com.apple.driver.AppleMikeyDriver 2.2.3f13
com.apple.driver.AGPM 100.12.69
com.apple.driver.ApplePlatformEnabler 2.0.5d3
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOBluetoothSerialManager 4.0.7f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.GeForce 7.2.8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleMuxControl 3.1.32
com.apple.driver.ApplePolicyControl 3.1.32
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelHD4000Graphics 7.2.8
com.apple.driver.AppleIntelFramebufferCapri 7.2.8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.0.4
com.apple.driver.AirPort.Brcm4331 560.7.21
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleUSBHub 5.0.8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 5.0.7
com.apple.driver.AppleUSBXHCI 1.0.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.DspFuncLib 2.2.3f13
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.2.3f13
com.apple.iokit.IOHDAFamily 2.2.3f13
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleGraphicsControl 3.1.32
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.nvidia.nv50hal 7.2.8
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.4
com.apple.nvidia.nvGK100hal 7.2.8
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nvGF100hal 7.2.8
com.apple.NVDAResman 7.2.8
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.7f2
com.apple.iokit.IOBluetoothFamily 4.0.7f2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleThunderboltDPInAdapter 1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.0.7
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro10,1, BootROM MBP101.00EE.B00, 4 processors, Intel Core i7, 2.7 GHz, 16 GB, SMC 2.3f32
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.198.19.21)
Bluetooth: Version 4.0.7f2, 2 service, 11 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM768E, 751,28 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0263, 0x1d182000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3 -
In Logic pro 9.1.7, all of a sudden, it freezes at 'initializing core audio! Does someone have a solution to this problem?
Well, let's see:
a) computer
b) operating system
c) application (i.e. Logic)
b) sub program's (i.e. plugins)
could all together trigger the cause.
So a lot more info would certainly help us to make some sort of intelligent guess.
Have a nice day! -
Solved\ Random lockups/system freezes AMD 6850 crossfire mode
Hello all,
I have come to these forums because i have a problem for 4 months now and i cant seem to figure out.
First my systemspecs:
Asrock X79 extreme 4 slot 2011 (Bios version 2.0 (latest))
Intel i7 3820
16 Gig Geil 1600 DDR 3 memory (4 dimms)
2 x MSI R6850 Cyclone Power Edition/OC (crossfire mode with bridge)
1 x OCZ agility 3 SATA III 2.5" SSD 120GB (System drive)
2 x Samsung HDD 500GB 7200rpm
TG600-BZ 600 Watt maxx 24 amps
Running Windows 7 64bit
Catalyst 12.6
12.7 CAP1
So my problem:
When i have 2 cards inserted in crossfire mode my system goes true random lock ups and freezes. Up to several times a day.
While heavy load and gaming i sometime hear the system hang for a few seconds (sounds hangs system freezez) and then it continues to run.. usually that happens about 5-6 times before the system hangs locks up and does not respond anymore.. (i can hear the sounds hanging) and have to do a reset.
I had a few BSOD's getting the well know ATIKMPAG.sys error but that happen only twice.
Funny thing is that it does not always does this while under heavy load but also while doing YouTube video's.. even had one while cooking dinner.. (computer not in use).
Seems to be completely random.
So what have i done to fix the problem:
I have done a complete clean install of windows 7 only running basic drivers and hardware.. problem persists
Check system event log on any problems but since it does sudden lockups there are no logs of these hardware events.
Did a check on my power saving options in windows.. made sure all were on performance.
I have run true Catalyst 12.1 to 12.6 and all kinds of cap's.. problem persists
Checked temp, does not come above 70 degrees Celsius. (case temp not above 30)
Made sure i run the latest BIOS version of my motherboard.
Run a 24 hours memory test with memtest86+ no errors.
Did a heavy load and MSI burn in test on the single cards separately from each other continues to run perfectly.
I have run both cards separately from each other in my system (single card mode) for 2 weeks...(both PCIE slots) system runs like a charm.. no lockups no random freezes.
So i hope anyone can help me, i have some experience troubleshooting computer problems but this one has me baffled.
TheAbeLQuote from: TheAbel on 19-July-12, 14:19:47
This is indeed the Tagan piperock 600 watt. Problem is that i have no idea how much amp my cards are pulling from 1 rail.. are they trying to pull it all from 1 rail? or are they getting power from 2 different rails. If my crossfire setup is pulling al his power from 1 rail i still have a problem..
Also i read in the review (my german is rusty but ok, tnx xmad) that when turbo mode is enabled that all rails work as one rail.. so 80 amp is available? Is this even possibly?
My new PSU will arrive today so i will report tomorrow if it has solved the issue or not.
No, as noted in my last reply for your PSU: "48A combined total for +12V rails". Max for any individual 12V rail is 20A. If three of the rails are loaded to total of 48A then the 4th is useless. You can't just add up 20+20+20+20 & come up with 80, it doesn't work that way on PSU although Antec seems to think so. -
My apologies in advance on the possible redundancy... I'm a long time Mac user (1985 & a little Fat Mac), and I've never been discouraged with a problem such as this. I don't claim to be an expert, but I've seen alot through the years.
I've had my G5 (Dual 2GHz PowerPC, 2GB SDRAM, OS 10.4.7) for going on 3 years now, and just the other day for the first time I started to experience random freezes. Total system freezes, where the cursor begins to spin endlessly and the clock stops. (I used to believe that pressing the capslock key could identify whether the system was just lagging, or indeed frozen if the light came on... The light would come on, but the system never caught up.) The only way to get my system back is to power-cycle.
This happens to me sometimes just after the computer has booted and is just sitting there (I have no apps set to automatically load up). Sometimes it happens when I double-click to open my HD. It will sometimes happen randomly after selecting various apps to open from the Dock or from their file in the Applications folder. I've tried leaving my Activity Monitor open to see what happens just as it freezes, but I can't catch anything.
I've removed all external devices, stripped it down to just the G5, the keyboard, monitor and mouse.
I zapped the PRAM.
I have run all of the Disk, Permissions and Cache drills...
I have Onyx installed and have used both it's maintenance tools and cleaning tools...
I have used DiskWarrior to verify the directory (it has come back clean) and replaced it anyway with a fresh copy. (I've used v.3.0.3 - compatible with Tiger.)
I boot it back up, and bam - just when I least expect it I freeze up.
Any help would be greatly appreciated.
-MikeHi, I have the same problem too since a year or so. (I also own a G5 dual 2GH, 1GB RAM).
The freezes became frequent with Tiger 10.4 and every day get worst. Today I'm 10.4.7.
I've taken to support service and, along a year, the hard driver have been replaced once, RAM once too, the motherboard has been replaced twice and first a micro and last the other (few days ago) have been replaced too.
My G5 keeps freezing. Some times with kernel errors on screen, but major times the screen freezes and in few minutes, the fans begin to spin fast and loudly.
Many times after the freeze the system can be rebooted and is usable (no freezes in hours), but sometimes it keep freezing and "refreezing" and so on and I can not use the system in days.
Any times the freezes ocurs when I'm logged in the system, other when is booting (you can see the spinning gear and suddenly it stops). Another times the system frezzes before it begin to load the sistem.
Does any one have a solution.
TIA
Antonio Peinado
PS My son has an identical G5 bought both together and works fine, no freeze in two years.
G5 dual 2GH, 1GB RAM Mac OS X (10.4.7) -
Dvd play stops suddenly - computer freezes- can you help?
I put in the dvd - it plays for maybe 15 minutes and all is well and suddenly whole computer is frozen up - can get back to anything so must push and hold power button to manually shut it down. What is wrong? Is my drive going or is it a software issue? Please advise!
Hi, and welcome to Apple Discussions.
Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
You will see your normal desktop. Once completely started up in Safe Mode, restart normally, and go to Applications > Utilities > Disk Utility. Select the named boot volume in the left sidebar ("Macintosh HD" unless you've renamed it). Repair permissions on it.
See if a little hard drive maintenance helps things out.
(Every time you have to do a forced shutdown instead of a normal one as you have been having to do when the system freezes, there is a chance of hard drive damage and you should repair the hard drive, either by booting into Safe Mode OR by starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then choose Installer > Open Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
Once you have repaired the hard drive with either Safe Mode or the Install disc's Disk Utility, then start up normally and repair permissions from Disk Utility in the Utilities folder on the hard drive.) -
Suddenly system overload messages
ahoy all.
have been using logic express 7.2 for over a year now, love it, never had to freeze a track. the other night i completed a project and did a bounce, closed it and went to bed. nota huge project, around 8 audio, 5 audio instrument tracks. ran the whole sessions with no overloads (in fact, i have had about 3 overloads in all my experience with logic). a few days later, i open the project again and now system overloads constantly. it also occurs now on other similiar sized projects that before had no overloads ever.only thing that helped was freezing tracks. i searched the forum and tried all the various suggestions, no luck.
i am wondering what could have happened (to logic, macos, macbook, etc) that would cause the sudden system overload messages? the only thing that happened in those few days was that i drained my macbook battery and now i have the infamous macbook x on battery problem. but i am not sure how that could effect logic.
thanks.I know you said you drained your macbook battery - but here's a thought that came to me - When is the last time you shut down your computer/restarted it? The RAM could be clogged. As ridiculous as that sounds, it does happen. Little artifacts of garbage and leftovers of tasks your computer has been performing over the last few days between your session and now could have somehow not cleared itself from the RAM. Restart it. Or shut it down for a while or something. Unless you've already done that. Then, we'll work from there . . .
-
System Freeze After Install WeatherDock
I downloaded WeatherDock (free utility to show current weather on your desktop) and checked off for it to start at startup. Worked ok for a day but "something" is causing my system to freeze all of a sudden and I think it's that. However, I can't uninstall it because when I reboot and after the system comes back, the WeatherDock application starts and the system freezes again !!
Anyway to get in there and remove that from the startup OR remove the application entirely ?
Any help would be appreciated..T H A N K Y O U, V K !!!!!!
That worked !! I was able to delete the application that way and rebooted back to normal ...
Whewwwwwwwwwwwww..
Much appreciated.... -
Power Manager and LCD Brightness, System Freezes, and other Problems
I have a brand new X200 with PM 1.54. At first everything was working great. Over the past few days I've noticed a few things:
1. When running on battaries, the screen brightness changes about every 10 seconds even though the profile I'm using has that feature turned off.
2. After running the computer for about 1/2 hr, suddenly the PM shows a dramatic reduction in amount of time left on my battery which coinsides with:
a) fan consantly running; AND
b) about 10 minuntes later my entire system freezes and I have to push the power button to force a reboot.
Any ideas what's wrong?Since your Mac Pro is new, you would do well to contact Apple about this problem while the warranty is still in effect.
-
System freezes due to hard disk problems only on Linux (not windows)
Intro/context:
Recently i've bought (about 2 months) a new laptop, a Lenovo G50-70, which came with Windows 8.1. As i had no interest on that OS, i formatted the disk and installed only Arch Linux. During that time i experienced system freezes which i had no idea why they were happening. As time went by, i found disk errors on system logs related to hard drive. I searched those errors and almost everything i found was that my hard drive had problems, so i decided to use my warranty. But first, i installed the original OS back again. And after using it a couple of weeks, i didn't experiencie any problem with my hard drive (on Linux it was really frequent). Now i've installed Arch Linux back, along with original Windows 8.1, having dual boot. There is no disk problem when using Windows, but when on Arch, i have the same errors and problems i used to have. So i assume it may be related to kernel or some confniguration issue.
I also haven't noticed any relation between system freezes and system use. I mean, it can happen either under light or heavy use.
tl dr: system freezes randomly for some minutes when using linux due to hard drive problems. The problem doesn't happen on windows.
What i've done so far:
The first period i was on Arch, i run smart (long and short), fsck, and hdparm tests. And nothing (no errors). Searched for bad blocks, and nothing. When back on windows, i also run tests on hdd and found no problems, except some sector reallocation not-that-nice indicators. These problems occured at the end of the first arch installation period. But still i currently experience no problem on windows.
I've also tried setting libata: noncq, 3.0G, noacpi, noapic kernel parameters, and had no result.
Changed BIOS setting from AHCI to Legacy, and no result. Also updated BIOS and no result.
I found no firmware update for this hard drive.
So i don't know what other thing i can try. I want to emphasize that there is no problem, no freezing, when running Windows, so i don't think it's a hard drive issue.
Info:
Hard drive is a Toshiba 2.5" HDD MQ01ABD100 5400 rpm.
Some logs i've recollected all this time:
journalctl -xfa --system
abr 21 13:51:13 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 13:51:24 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 21 13:51:24 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 7
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 13:51:24 echoes kernel: ata1.00: status: { DRDY }
abr 21 13:51:24 echoes kernel: ata1: hard resetting link
abr 21 13:51:24 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 13:51:24 echoes kernel: ata1.00: configured for UDMA/100
abr 21 13:51:24 echoes kernel: ata1: EH complete
abr 21 14:01:40 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 23 pio 512 in
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 18
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:01:51 echoes udisksd[627]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/TOSHIBA_MQ01ABD100_Y44MT611T: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
dmesg
[55661.023028] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
[55661.023034] ata1.00: failed command: READ FPDMA QUEUED
[55661.023040] ata1.00: cmd 60/08:78:18:08:c0/00:00:4b:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[55661.023042] ata1.00: status: { DRDY }
[55661.023046] ata1: hard resetting link
[55666.358537] ata1: link is slow to respond, please be patient (ready=0)
[55671.053813] ata1: COMRESET failed (errno=-16)
[55671.053819] ata1: hard resetting link
[55676.389438] ata1: link is slow to respond, please be patient (ready=0)
[55678.897149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[55681.320305] ata1.00: configured for UDMA/100
[55681.320319] ata1.00: device reported invalid CHS sector 0
[55681.320349] ata1: EH complete
[55729.969443] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[55729.969588] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
dmesg
[102884.889930] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[102884.890305] systemd[1]: Unit systemd-journald.service entered failed state.
[102884.890333] systemd[1]: systemd-journald.service failed.
[102885.560745] systemd-coredump[28916]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5bf9a012fed048ce8975998cf3c3c20e.6705.1427990901000000.
[102885.860957] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[102921.797810] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[104179.117363] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[104179.117369] ata1.00: failed command: READ FPDMA QUEUED
[104179.117375] ata1.00: cmd 60/08:00:48:88:8b/00:00:4d:00:00/40 tag 0 ncq 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[104179.117377] ata1.00: status: { DRDY }
[104179.117381] ata1: hard resetting link
[104184.453382] ata1: link is slow to respond, please be patient (ready=0)
[104189.149114] ata1: COMRESET failed (errno=-16)
[104189.149121] ata1: hard resetting link
[104189.469276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104189.952982] ata1.00: configured for UDMA/100
[104189.952989] ata1.00: device reported invalid CHS sector 0
[104189.953004] ata1: EH complete
[104508.223792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[104508.223798] ata1.00: failed command: SMART
[104508.223803] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 2
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[104508.223806] ata1.00: status: { DRDY }
[104508.223810] ata1: hard resetting link
[104509.984601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104510.698126] ata1.00: configured for UDMA/100
[104510.698157] ata1: EH complete
One of the latest and worse
journalctl -xfa --system
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:00:e0:d6:75/00:00:00:00:00/40 tag 0 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:08:08:d8:75/00:00:00:00:00/40 tag 1 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:10:30:d9:75/00:00:00:00:00/40 tag 2 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:18:58:da:75/00:00:00:00:00/40 tag 3 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:20:e8:e5:75/00:00:00:00:00/40 tag 4 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:28:80:db:75/00:00:00:00:00/40 tag 5 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:30:68:dd:75/00:00:00:00:00/40 tag 6 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:38:90:de:75/00:00:00:00:00/40 tag 7 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:40:b8:df:75/00:00:00:00:00/40 tag 8 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:48:90:e1:75/00:00:00:00:00/40 tag 9 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:50:98:e3:75/00:00:00:00:00/40 tag 10 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:58:c0:e4:75/00:00:00:00:00/40 tag 11 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/c8:78:28:b9:2a/0b:00:4e:00:00/40 tag 15 ncq 1544192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:80:b0:4b:c0/00:00:4f:00:00/40 tag 16 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:88:90:4b:80/00:00:50:00:00/40 tag 17 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:90:98:22:81/00:00:50:00:00/40 tag 18 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:98:00:0e:00/00:00:5f:00:00/40 tag 19 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a0:00:08:80/00:00:5f:00:00/40 tag 20 ncq 4096 out
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a8:80:08:80/00:00:5f:00:00/40 tag 21 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:b0:08:0b:81/00:00:5f:00:00/40 tag 22 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:b8:70:c8:75/00:00:00:00:00/40 tag 23 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c0:20:c9:75/00:00:00:00:00/40 tag 24 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c8:88:c9:75/00:00:00:00:00/40 tag 25 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d0:58:ca:75/00:00:00:00:00/40 tag 26 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d8:a0:ce:75/00:00:00:00:00/40 tag 27 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e0:68:d3:75/00:00:00:00:00/40 tag 28 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e8:90:d4:75/00:00:00:00:00/40 tag 29 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:f0:b8:d5:75/00:00:00:00:00/40 tag 30 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 12 88 d7 c0 00 04 d0 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 310958016
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 36311758 (offset 8388608 size 2695168 starting block 38869906)
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995128
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995129
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995130
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995131
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995132
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995133
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995134
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995135
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995136
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995137
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4b dd 39 88 00 01 78 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1272789384
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 34999445 (offset 0 size 192512 starting block 159098720)
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4e 2a b3 e8 00 05 40 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1311421416
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 35001016 (offset 0 size 2232320 starting block 163927845)
abr 22 12:57:11 echoes kernel: ata1: EH complete
abr 22 12:57:11 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 22 12:57:11 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 22 12:57:11 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 25
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1: EH complete
Current smart status:
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.1-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: Y44MT611T
LU WWN Device Id: 5 000039 5e1a80e85
Firmware Version: AX1P5E
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun May 3 16:42:06 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 234) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1671
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 306
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 152
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 699
10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 216
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 14140
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 16/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 19
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 515
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0x50) Completed without error 00% 611 -
# 2 Short offline Completed without error 00% 611 -
# 3 Short offline Completed without error 00% 597 -
# 4 Vendor (0x50) Completed without error 00% 583 -
# 5 Short offline Completed without error 00% 583 -
# 6 Vendor (0x50) Completed without error 00% 575 -
# 7 Short offline Completed without error 00% 575 -
# 8 Short offline Completed without error 00% 547 -
# 9 Extended offline Completed without error 00% 529 -
#10 Short offline Completed without error 00% 355 -
#11 Short offline Completed without error 00% 355 -
#12 Extended offline Aborted by host 70% 355 -
#13 Short offline Completed without error 00% 319 -
#14 Vendor (0x50) Completed without error 00% 13 -
#15 Short offline Completed without error 00% 13 -
#16 Short offline Completed without error 00% 12 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kernels used have been from 3.9 to current: Linux echoes 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 x86_64 GNU/Linux
Last edited by jesu (2015-05-03 19:42:53)Something i'd noticed both the first time i was on arch and now i've reinstalled it, was that at first i didn't have this problem. I mean, when Arch was just installed. While i was installing and setting up everything.
Now, i'm not 100% sure about this, but i think problems began when using my current user. Disk is partitioned the following way:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1000M 0 part
├─sda2 8:2 0 260M 0 part /boot
├─sda3 8:3 0 207,7G 0 part
├─sda4 8:4 0 25G 0 part
├─sda5 8:5 0 14,8G 0 part
├─sda6 8:6 0 80,5G 0 part /
├─sda8 8:8 0 599G 0 part /home
└─sda9 8:9 0 2G 0 part [SWAP]
So, i believe problems, for some reason, are related (and were related), both before and now, to the /home partition, /dev/sda8 in this ocassion.
Because of this, i booted into systemd rescue mode, like root, rw, and unmounted /home partition. Despite root-only limitations, i used the system for a couple of hours, started lxqt, browsed the web mainly, and experienced no problem at all.
Now i booted normally, with my regular user, and these problems are experienced just like before (and almost instantly, like 3 or 5 minutes after starting system use).
dmesg this time showed a some different log, though it's not the first time i see this. I just didn't saved that kind of log before.
[ 653.821719] ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen
[ 653.821726] ata1.00: failed command: READ FPDMA QUEUED
[ 653.821732] ata1.00: cmd 60/08:40:60:25:43/00:00:1b:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 653.821735] ata1.00: status: { DRDY }
[ 653.821739] ata1: hard resetting link
[ 659.156760] ata1: link is slow to respond, please be patient (ready=0)
[ 663.851604] ata1: COMRESET failed (errno=-16)
[ 663.851610] ata1: hard resetting link
[ 669.186591] ata1: link is slow to respond, please be patient (ready=0)
[ 673.881456] ata1: COMRESET failed (errno=-16)
[ 673.881462] ata1: hard resetting link
[ 679.216481] ata1: link is slow to respond, please be patient (ready=0)
[ 702.743982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 703.012578] ata1.00: configured for UDMA/100
[ 703.012584] ata1.00: device reported invalid CHS sector 0
[ 703.012599] ata1: EH complete
[ 714.097642] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
[ 742.443488] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443494] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 28 c3 c6 40 00 00 10 00
[ 742.443497] blk_update_request: I/O error, dev sda, sector 683918912
[ 742.443503] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489866)
[ 742.443506] Buffer I/O error on device sda8, logical block 9323208
[ 742.443508] Buffer I/O error on device sda8, logical block 9323209
[ 742.443515] sd 0:0:0:0: [sda] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443518] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x2a 2a 00 28 c3 c6 80 00 00 10 00
[ 742.443520] blk_update_request: I/O error, dev sda, sector 683918976
[ 742.443522] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489874)
[ 742.443524] Buffer I/O error on device sda8, logical block 9323216
[ 742.443526] Buffer I/O error on device sda8, logical block 9323217
[ 742.443531] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443534] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 28 c3 c6 d0 00 00 10 00
[ 742.443536] blk_update_request: I/O error, dev sda, sector 683919056
[ 742.443538] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489884)
[ 742.443540] Buffer I/O error on device sda8, logical block 9323226
[ 742.443542] Buffer I/O error on device sda8, logical block 9323227
[ 742.443547] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443549] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 28 c3 c7 10 00 00 10 00
[ 742.443551] blk_update_request: I/O error, dev sda, sector 683919120
[ 742.443553] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489892)
[ 742.443555] Buffer I/O error on device sda8, logical block 9323234
[ 742.443557] Buffer I/O error on device sda8, logical block 9323235
[ 756.187685] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[ 756.187986] systemd[1]: Unit systemd-journald.service entered failed state.
[ 756.188116] systemd[1]: systemd-journald.service failed.
[ 756.188474] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 756.189106] systemd[1]: Stopping Flush Journal to Persistent Storage...
[ 756.189143] systemd[1]: Listening on Journal Audit Socket.
[ 756.189801] systemd[1]: Starting Journal Service...
[ 757.525493] systemd-coredump[1038]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.b8610e85f9074a418534aaee0adbac56.141.1430763073000000.lz4.
[ 758.133944] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 758.503041] systemd[1]: Started Journal Service.
[ 759.180771] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 974.867721] ata1.00: exception Emask 0x0 SAct 0x3f80 SErr 0x0 action 0x6 frozen
[ 974.867732] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867742] ata1.00: cmd 61/08:38:68:d3:c5/00:00:1a:00:00/40 tag 7 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867747] ata1.00: status: { DRDY }
[ 974.867751] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867759] ata1.00: cmd 61/08:40:88:d3:c5/00:00:1a:00:00/40 tag 8 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867763] ata1.00: status: { DRDY }
[ 974.867767] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867774] ata1.00: cmd 61/08:48:a0:d3:c5/00:00:1a:00:00/40 tag 9 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867778] ata1.00: status: { DRDY }
[ 974.867781] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867789] ata1.00: cmd 61/20:50:c0:d3:c5/00:00:1a:00:00/40 tag 10 ncq 16384 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867793] ata1.00: status: { DRDY }
[ 974.867796] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867803] ata1.00: cmd 61/10:58:f0:d3:c5/00:00:1a:00:00/40 tag 11 ncq 8192 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867807] ata1.00: status: { DRDY }
[ 974.867810] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867817] ata1.00: cmd 61/08:60:10:d4:c5/00:00:1a:00:00/40 tag 12 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867821] ata1.00: status: { DRDY }
[ 974.867824] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867831] ata1.00: cmd 61/18:68:28:d4:c5/00:00:1a:00:00/40 tag 13 ncq 12288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867835] ata1.00: status: { DRDY }
[ 974.867841] ata1: hard resetting link
[ 980.202774] ata1: link is slow to respond, please be patient (ready=0)
[ 984.900902] ata1: COMRESET failed (errno=-16)
[ 984.900908] ata1: hard resetting link
[ 990.236024] ata1: link is slow to respond, please be patient (ready=0)
[ 994.930829] ata1: COMRESET failed (errno=-16)
[ 994.930836] ata1: hard resetting link
[ 996.798104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 997.014012] ata1.00: configured for UDMA/100
[ 997.014020] ata1.00: device reported invalid CHS sector 0
[ 997.014023] ata1.00: device reported invalid CHS sector 0
[ 997.014025] ata1.00: device reported invalid CHS sector 0
[ 997.014026] ata1.00: device reported invalid CHS sector 0
[ 997.014028] ata1.00: device reported invalid CHS sector 0
[ 997.014030] ata1.00: device reported invalid CHS sector 0
[ 997.014031] ata1.00: device reported invalid CHS sector 0
[ 997.014065] ata1: EH complete
There are some sda8 (home) related messages. I also found these messages first time Arch was installed (i think also related to home partition).
root and home partitions are both ext4. -
MacBook Pro system freezes - please help!
Hi there,
I've been experiencing some system freezes with my MBP recently. I have all the most recent software updates installed and there's really no detectable pattern to the freezes. I usually notice it when the screen has been blanked out for a while -- I'll come back, swipe the trackpad, and the screen will turn on, but the screensaver will be stuck in a certain position, and although the cursor will move no applications will respond and I am forced to hard-reboot by holding the power button down. I've checked some of the logs in Console to see if anything has been noted but haven't had any joy so far. I can't think of anything specific to start looking -- any advice will be REALLY helpful. I've searched the forums but haven't found anything that helps.
Thanks in advance!Hello,
Thank your informative post, as it helps us to troubleshoot much quicker!
You didn't indicate that you had tried resetting the SMC, (System Management Controller) .. so go here, read the information first and follow the instructions... that could be the answer.
If after trying this applications still won't launch or respond, post back.
Carolyn -
Memory issues - kernel panics / system freezes with 1Gb Memory Card
I've recently updated my PowerBook OS to 10.4.7 and now more recently 10.4.8.
Prior to this, i had been running a pair of pc2700 memory cards (1x1Gb + 1x 512Mb) bought from crucial technology on 10.3.9 with no problems.
During the upgrade, i experienced complete system lock ups and kernel panics. pulling the 1Gb card resolved the problem.
So i thought it could be duff memory (it happens). I ran hardware checker, both long and short tests, ran memchecker from single user and there was no reported errors although i was still getting crashes.
I returned the memory to crucial and they replaced it and then i went to reinstall memory in the pb.
Once reinstalled, problems re-emerged. Both System profiler and iStat pro show both memory sticks as ok. both are pc2700 DDR.
i tried just the 1 Gb stick in alternate memory slots. with the memory in the lower slot i was getting system freezes, in the top slot i was getting kernel panics.
I've pulled the 1Gb and reverted to 768Mb (512Mb lower (crucial)/ 256MB (apple) upper) and i'm back to normal.
Now what?
As my mac is getting on, i'd like to get as much RAM in it as i can, ideally the 1.5Gb /2Gb which it can support. I'd be suprised if it could be the memory stick being duff (2 duff in a row?), its not a faulty memory slot as system profiler is showing that its full.
Any suggestions? Anything to do with how 10.4.8 handles the memory addressing?
Any help would be appreciated.
PowerBook G4 1Ghz FW800 Mac OS X (10.4.8)I've had that problem, too. I found out that it was one of my memory modules that were broken.
I'd say pop back in your other memory module, then get out your PowerBook DVD and stick it in Restart your PowerBook while holding down the Option Key on your keyboard until some buttons start to show up on your screen.
Select the Hardware Test one, then click the Arrow button. It'll boot into a utility and you can run a hardware test that includes checking your memory.
If any of your memory is bad, it'll show up like "**ERROR ERROR**" and give you a code.
After you've identified the hardware problem (hopefully just the RAM), then you can go to Crucial's website and fill out an RMA request to have the memory replaced. I'm pretty sure Crucial has a life-time warranty on their memory products. -
Screen flickering and system freezes when using Nouveau driver.
I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
I can't use the computer in that state so I force a shutdown.
I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
[ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
[ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
[ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 57ff0000 00040
[ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
[ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 519MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x57feffff]
[ 0.000000] On node 0 totalpages: 360319
[ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1040 pages used for memmap
[ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
[ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2883328 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
[ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15ba000 - 0xc1646000 ( 560 kB)
.data : 0xc141613e - 0xc15b9d80 (1679 kB)
.text : 0xc1000000 - 0xc141613e (4184 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1908.551 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003404] Security Framework initialized
[ 0.003415] AppArmor: AppArmor disabled by boot time parameter
[ 0.003432] Mount-cache hash table entries: 512
[ 0.006819] Initializing cgroup subsys cpuacct
[ 0.006822] Initializing cgroup subsys memory
[ 0.006834] Initializing cgroup subsys devices
[ 0.006837] Initializing cgroup subsys freezer
[ 0.006840] Initializing cgroup subsys net_cls
[ 0.006842] Initializing cgroup subsys blkio
[ 0.006879] CPU: Physical Processor ID: 0
[ 0.006882] CPU: Processor Core ID: 0
[ 0.006885] mce: CPU supports 5 MCE banks
[ 0.006896] LVT offset 0 assigned for vector 0xf9
[ 0.006902] process: using AMD E400 aware idle routine
[ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.007021] Freeing SMP alternatives: 16k freed
[ 0.007977] ACPI: Core revision 20121018
[ 0.015366] ftrace: allocating 18273 entries in 36 pages
[ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
[ 0.059999] Performance Events: AMD PMU driver.
[ 0.059999] ... version: 0
[ 0.059999] ... bit width: 48
[ 0.059999] ... generic registers: 4
[ 0.059999] ... value mask: 0000ffffffffffff
[ 0.059999] ... max period: 00007fffffffffff
[ 0.059999] ... fixed-purpose events: 0
[ 0.059999] ... event mask: 000000000000000f
[ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
[ 0.083412] smpboot: Booting Node 0, Processors #1 OK
[ 0.006666] Initializing CPU#1
[ 0.176732] Brought up 2 CPUs
[ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
[ 0.177423] devtmpfs: initialized
[ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
[ 0.178162] RTC time: 21:06:38, date: 03/21/13
[ 0.178225] NET: Registered protocol family 16
[ 0.178397] node 0 link 0: io port [8000, ffff]
[ 0.178401] TOM: 0000000060000000 aka 1536M
[ 0.178404] node 0 link 0: mmio [a0000, bffff]
[ 0.178408] node 0 link 0: mmio [60000000, efffffff]
[ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.178418] bus: [bus 00-04] on node 0 link 0
[ 0.178421] bus: 00 [io 0x0000-0xffff]
[ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
[ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
[ 0.178495] ACPI: bus type pci registered
[ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.178581] PCI: Using MMCONFIG for extended config space
[ 0.178583] PCI: Using configuration type 1 for base access
[ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
[ 0.178681] mtrr: corrected configuration.
[ 0.180670] bio: create slab <bio-0> at 0
[ 0.180670] ACPI: Added _OSI(Module Device)
[ 0.180670] ACPI: Added _OSI(Processor Device)
[ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181260] ACPI: EC: Look up EC in DSDT
[ 0.186070] ACPI: Interpreter enabled
[ 0.186077] ACPI: (supports S0 S3 S4 S5)
[ 0.186098] ACPI: Using IOAPIC for interrupt routing
[ 0.193127] ACPI: No dock devices found.
[ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
[ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
[ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
[ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
[ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[ 0.195066] PCI: root bus 00: hardware-probed resources
[ 0.195117] PCI host bridge to bus 0000:00
[ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
[ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
[ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.195564] pci 0000:00:02.0: supports D1 D2
[ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.195639] pci 0000:00:02.1: supports D1 D2
[ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
[ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
[ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
[ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.196412] pci 0000:01:09.0: supports D1 D2
[ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
[ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
[ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196648] pci 0000:03:00.0: supports D1 D2
[ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.203413] pci_bus 0000:00: on NUMA node 0
[ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.245086] vgaarb: loaded
[ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
[ 0.245086] PCI: Using ACPI for IRQ routing
[ 0.246696] PCI: pci_cache_line_size set to 64 bytes
[ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
[ 0.246902] NetLabel: Initializing
[ 0.246904] NetLabel: domain hash size = 128
[ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.246923] NetLabel: unlabeled traffic allowed by default
[ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.256702] Switching to clocksource hpet
[ 0.264319] pnp: PnP ACPI init
[ 0.264346] ACPI: bus type pnp registered
[ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
[ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265458] pnp 00:02: [dma 4]
[ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
[ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
[ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267589] pnp: PnP ACPI: found 14 devices
[ 0.267590] ACPI: ACPI bus type pnp unregistered
[ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305677] pci 0000:00:04.0: setting latency timer to 64
[ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305804] NET: Registered protocol family 2
[ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.306184] TCP: reno registered
[ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306279] NET: Registered protocol family 1
[ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370606] pci 0000:00:0d.0: Boot video device
[ 0.370621] PCI: CLS 64 bytes, default 64
[ 0.370687] Unpacking initramfs...
[ 0.455995] Freeing initrd memory: 2900k freed
[ 0.459106] apm: BIOS not found.
[ 0.459448] audit: initializing netlink socket (disabled)
[ 0.459468] type=2000 audit(1363899998.456:1): initialized
[ 0.474029] bounce pool size: 64 pages
[ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.476263] VFS: Disk quotas dquot_6.5.2
[ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476593] msgmni has been set to 1731
[ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.477042] io scheduler noop registered
[ 0.477044] io scheduler deadline registered
[ 0.477053] io scheduler cfq registered (default)
[ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.477471] vesafb: scrolling: redraw
[ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.484141] Console: switching to colour frame buffer device 80x30
[ 0.490611] fb0: VESA VGA frame buffer device
[ 0.490704] GHES: HEST is not enabled!
[ 0.490719] isapnp: Scanning for PnP cards...
[ 0.802592] isapnp: No Plug & Play device found
[ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.845087] mousedev: PS/2 mouse device common for all mice
[ 0.845182] rtc_cmos 00:04: RTC can wake from S4
[ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.845435] cpuidle: using governor ladder
[ 0.845437] cpuidle: using governor menu
[ 0.845439] EFI Variables Facility v0.08 2004-May-17
[ 0.845489] drop_monitor: Initializing network drop monitor service
[ 0.845593] TCP: cubic registered
[ 0.845736] NET: Registered protocol family 10
[ 0.845940] NET: Registered protocol family 17
[ 0.845958] Key type dns_resolver registered
[ 0.846129] Using IPI No-Shortcut mode
[ 0.846264] PM: Hibernation image not present or could not be loaded.
[ 0.846279] registered taskstats version 1
[ 0.846851] Magic number: 5:851:146
[ 0.846912] acpi device:17: hash matches
[ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
[ 0.847246] Freeing unused kernel memory: 560k freed
[ 0.847645] Write protecting the kernel text: 4188k
[ 0.847679] Write protecting the kernel read-only data: 1284k
[ 0.858078] systemd-udevd[45]: starting version 198
[ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.904637] ACPI: bus type usb registered
[ 0.904681] usbcore: registered new interface driver usbfs
[ 0.904697] usbcore: registered new interface driver hub
[ 0.904815] usbcore: registered new device driver usb
[ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.910252] ehci-pci: EHCI PCI platform driver
[ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
[ 0.912040] SCSI subsystem initialized
[ 0.915768] ACPI: bus type scsi registered
[ 0.918637] libata version 3.00 loaded.
[ 0.962268] hub 1-0:1.0: USB hub found
[ 0.962279] hub 1-0:1.0: 10 ports detected
[ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.962559] ehci-pci 0000:00:02.1: debug port 1
[ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.970261] hub 2-0:1.0: USB hub found
[ 0.970268] hub 2-0:1.0: 10 ports detected
[ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
[ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.971618] scsi0 : pata_amd
[ 0.972200] scsi1 : pata_amd
[ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.972517] sata_nv 0000:00:08.0: version 3.5
[ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.973161] scsi2 : sata_nv
[ 0.973470] scsi3 : sata_nv
[ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
[ 0.974209] scsi4 : sata_nv
[ 0.974369] scsi5 : sata_nv
[ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
[ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 1.143604] ata1.00: configured for UDMA/66
[ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
[ 1.149876] ata2: port disabled--ignoring
[ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
[ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
[ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
[ 1.936808] usbcore: registered new interface driver usbhid
[ 1.936814] usbhid: USB HID core driver
[ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
[ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.120325] ata6.00: configured for UDMA/133
[ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
[ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.146217] sda: sda1 sda2 sda3
[ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
[ 2.407819] Initializing USB Mass Storage driver...
[ 2.408184] scsi6 : usb-storage 1-8:1.0
[ 2.408335] usbcore: registered new interface driver usb-storage
[ 2.408337] USB Mass Storage support registered.
[ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
[ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
[ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
[ 3.353005] systemd[1]: Starting Remote File Systems.
[ 3.353024] systemd[1]: Reached target Remote File Systems.
[ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.353274] systemd[1]: Starting Journal Socket.
[ 3.353366] systemd[1]: Listening on Journal Socket.
[ 3.354821] systemd[1]: Starting Apply Kernel Variables...
[ 3.357143] systemd[1]: Mounting Huge Pages File System...
[ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.370154] systemd[1]: Mounting Debug File System...
[ 3.385832] systemd[1]: Starting Journal Service...
[ 3.393610] systemd[1]: Started Journal Service.
[ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.407389] systemd[1]: Starting Encrypted Volumes.
[ 3.407409] systemd[1]: Reached target Encrypted Volumes.
[ 3.407431] systemd[1]: Starting Setup Virtual Console...
[ 3.410492] systemd[1]: Starting udev Kernel Socket.
[ 3.410553] systemd[1]: Listening on udev Kernel Socket.
[ 3.410641] systemd[1]: Starting udev Control Socket.
[ 3.410689] systemd[1]: Listening on udev Control Socket.
[ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
[ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
[ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.441505] systemd[1]: Started Load Kernel Modules.
[ 3.441546] systemd[1]: Mounted FUSE Control File System.
[ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.441693] systemd[1]: Mounting Configuration File System...
[ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
[ 3.553856] systemd[1]: Mounting Temporary Directory...
[ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.744908] systemd-udevd[126]: starting version 198
[ 3.777101] systemd[1]: Started File System Check on Root Device.
[ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.790819] systemd[1]: Started udev Kernel Device Manager.
[ 3.800185] systemd[1]: Started Apply Kernel Variables.
[ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.205364] systemd-journald[122]: Received SIGUSR1
[ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
[ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.484570] ACPI: Power Button [PWRB]
[ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.484697] ACPI: Power Button [PWRF]
[ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 5.547898] Linux agpgart interface v0.103
[ 5.558914] ACPI: Fan [FAN] (on)
[ 5.559089] [drm] Initialized drm 1.1.0 20060810
[ 5.565468] microcode: AMD CPU family 0xf not supported
[ 5.567533] microcode: AMD CPU family 0xf not supported
[ 5.642735] wmi: Mapper loaded
[ 5.645076] kvm: Nested Virtualization enabled
[ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
[ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
[ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
[ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 5.685594] Console: switching to colour dummy device 80x25
[ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
[ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
[ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
[ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
[ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
[ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
[ 5.761381] [TTM] Initializing pool allocator
[ 5.761831] nouveau [ DRM] VRAM: 125 MiB
[ 5.761838] nouveau [ DRM] GART: 512 MiB
[ 5.761844] nouveau [ DRM] BIT BIOS found
[ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
[ 5.761852] nouveau [ DRM] TMDS table version 1.1
[ 5.761855] nouveau [ DRM] DCB version 3.0
[ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
[ 5.761865] nouveau [ DRM] DCB conn 00: 0000
[ 5.761869] nouveau [ DRM] DCB conn 01: 1131
[ 5.761872] nouveau [ DRM] DCB conn 02: 0110
[ 5.761875] nouveau [ DRM] DCB conn 03: 0111
[ 5.761877] nouveau [ DRM] DCB conn 04: 0113
[ 5.762420] nouveau W[ DRM] DCB type 4 not known
[ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.763283] [drm] No driver support for vblank timestamp query.
[ 5.763931] nouveau [ DRM] 1 available performance level(s)
[ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 5.763939] nouveau [ DRM] c:
[ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
[ 5.811870] sky2: driver version 1.30
[ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
[ 5.814804] composite sync not supported
[ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
[ 5.815425] fbcon: nouveaufb (fb0) is primary device
[ 5.829143] IT8726 SuperIO detected.
[ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.856121] ppdev: user-space parallel port driver
[ 5.877128] Console: switching to colour frame buffer device 180x56
[ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
[ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
[ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 5.879730] hda_intel: Disabling MSI
[ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
[ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
[ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
[ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
[ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[ 8.208529] composite sync not supported
[ 8.244451] composite sync not supported
[ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
[ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 20.811802] composite sync not supported
[ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
[ 84.047784] usb 1-4: USB disconnect, device number 2
[ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
[ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
[ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 389.250323] composite sync not supported
Xorg log:
[ 7.949]
X.Org X Server 1.14.0
Release Date: 2013-03-05
[ 7.949] X Protocol Version 11, Revision 0
[ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
[ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 7.949] Build Date: 09 March 2013 11:46:22AM
[ 7.949]
[ 7.949] Current version of pixman: 0.28.2
[ 7.949] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
[ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 8.001] (==) No Layout section. Using the first Screen section.
[ 8.001] (==) No screen section available. Using defaults.
[ 8.001] (**) |-->Screen "Default Screen Section" (0)
[ 8.001] (**) | |-->Monitor "<default monitor>"
[ 8.011] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.011] (==) Automatically adding devices
[ 8.011] (==) Automatically enabling devices
[ 8.011] (==) Automatically adding GPU devices
[ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 8.060] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.060] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.069] (II) Loader magic: 0x825b620
[ 8.069] (II) Module ABI versions:
[ 8.069] X.Org ANSI C Emulation: 0.4
[ 8.069] X.Org Video Driver: 14.1
[ 8.069] X.Org XInput driver : 19.1
[ 8.069] X.Org Server Extension : 7.0
[ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 8.073] Initializing built-in extension Generic Event Extension
[ 8.073] Initializing built-in extension SHAPE
[ 8.073] Initializing built-in extension MIT-SHM
[ 8.073] Initializing built-in extension XInputExtension
[ 8.073] Initializing built-in extension XTEST
[ 8.073] Initializing built-in extension BIG-REQUESTS
[ 8.073] Initializing built-in extension SYNC
[ 8.073] Initializing built-in extension XKEYBOARD
[ 8.073] Initializing built-in extension XC-MISC
[ 8.073] Initializing built-in extension SECURITY
[ 8.073] Initializing built-in extension XINERAMA
[ 8.073] Initializing built-in extension XFIXES
[ 8.073] Initializing built-in extension RENDER
[ 8.073] Initializing built-in extension RANDR
[ 8.073] Initializing built-in extension COMPOSITE
[ 8.073] Initializing built-in extension DAMAGE
[ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
[ 8.073] Initializing built-in extension DOUBLE-BUFFER
[ 8.073] Initializing built-in extension RECORD
[ 8.073] Initializing built-in extension DPMS
[ 8.073] Initializing built-in extension X-Resource
[ 8.073] Initializing built-in extension XVideo
[ 8.073] Initializing built-in extension XVideo-MotionCompensation
[ 8.073] Initializing built-in extension XFree86-VidModeExtension
[ 8.073] Initializing built-in extension XFree86-DGA
[ 8.073] Initializing built-in extension XFree86-DRI
[ 8.073] Initializing built-in extension DRI2
[ 8.073] (II) LoadModule: "glx"
[ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.133] (II) Module glx: vendor="X.Org Foundation"
[ 8.133] compiled for 1.14.0, module version = 1.0.0
[ 8.133] ABI class: X.Org Server Extension, version 7.0
[ 8.133] (==) AIGLX enabled
[ 8.134] Loading extension GLX
[ 8.134] (==) Matched nouveau as autoconfigured driver 0
[ 8.134] (==) Matched nvidia as autoconfigured driver 1
[ 8.134] (==) Matched nv as autoconfigured driver 2
[ 8.134] (==) Matched nouveau as autoconfigured driver 3
[ 8.134] (==) Matched nvidia as autoconfigured driver 4
[ 8.134] (==) Matched nv as autoconfigured driver 5
[ 8.134] (==) Matched vesa as autoconfigured driver 6
[ 8.134] (==) Matched modesetting as autoconfigured driver 7
[ 8.134] (==) Matched fbdev as autoconfigured driver 8
[ 8.134] (==) Assigned the driver to the xf86ConfigLayout
[ 8.134] (II) LoadModule: "nouveau"
[ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
[ 8.154] compiled for 1.14.0, module version = 1.0.6
[ 8.154] Module class: X.Org Video Driver
[ 8.154] ABI class: X.Org Video Driver, version 14.1
[ 8.154] (II) LoadModule: "nvidia"
[ 8.155] (WW) Warning, couldn't open module nvidia
[ 8.155] (II) UnloadModule: "nvidia"
[ 8.155] (II) Unloading nvidia
[ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 8.155] (II) LoadModule: "nv"
[ 8.155] (WW) Warning, couldn't open module nv
[ 8.155] (II) UnloadModule: "nv"
[ 8.155] (II) Unloading nv
[ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
[ 8.155] (II) LoadModule: "vesa"
[ 8.156] (WW) Warning, couldn't open module vesa
[ 8.156] (II) UnloadModule: "vesa"
[ 8.156] (II) Unloading vesa
[ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.156] (II) LoadModule: "modesetting"
[ 8.156] (WW) Warning, couldn't open module modesetting
[ 8.156] (II) UnloadModule: "modesetting"
[ 8.156] (II) Unloading modesetting
[ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 8.157] (II) LoadModule: "fbdev"
[ 8.157] (WW) Warning, couldn't open module fbdev
[ 8.157] (II) UnloadModule: "fbdev"
[ 8.157] (II) Unloading fbdev
[ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.157] (II) NOUVEAU driver
[ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8.157] RIVA TNT (NV04)
[ 8.157] RIVA TNT2 (NV05)
[ 8.157] GeForce 256 (NV10)
[ 8.157] GeForce 2 (NV11, NV15)
[ 8.157] GeForce 4MX (NV17, NV18)
[ 8.157] GeForce 3 (NV20)
[ 8.158] GeForce 4Ti (NV25, NV28)
[ 8.158] GeForce FX (NV3x)
[ 8.158] GeForce 6 (NV4x)
[ 8.158] GeForce 7 (G7x)
[ 8.158] GeForce 8 (G8x)
[ 8.158] GeForce GTX 200 (NVA0)
[ 8.158] GeForce GTX 400 (NVC0)
[ 8.158] (++) using VT number 7
[ 8.175] (II) [drm] nouveau interface version: 1.1.0
[ 8.175] (II) Loading sub module "dri"
[ 8.175] (II) LoadModule: "dri"
[ 8.175] (II) Module "dri" already built-in
[ 8.175] (II) NOUVEAU(0): Loaded DRI module
[ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 8.175] (==) NOUVEAU(0): RGB weight 888
[ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
[ 8.175] (==) NOUVEAU(0): Using HW cursor
[ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 8.175] (==) NOUVEAU(0): Page flipping enabled
[ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
[ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
[ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
[ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
[ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
[ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 8.245] (II) NOUVEAU(0): Gamma: 2.20
[ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 8.245] (II) NOUVEAU(0): Default color space is primary color space
[ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
[ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
[ 8.245] (II) NOUVEAU(0): Supported established timings:
[ 8.245] (II) NOUVEAU(0): 720x400@70Hz
[ 8.245] (II) NOUVEAU(0): 640x480@60Hz
[ 8.245] (II) NOUVEAU(0): 640x480@67Hz
[ 8.245] (II) NOUVEAU(0): 640x480@72Hz
[ 8.245] (II) NOUVEAU(0): 640x480@75Hz
[ 8.245] (II) NOUVEAU(0): 800x600@56Hz
[ 8.245] (II) NOUVEAU(0): 800x600@60Hz
[ 8.245] (II) NOUVEAU(0): 800x600@72Hz
[ 8.245] (II) NOUVEAU(0): 800x600@75Hz
[ 8.245] (II) NOUVEAU(0): 832x624@75Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
[ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
[ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8.245] (II) NOUVEAU(0): Supported standard timings:
[ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 8.245] (II) NOUVEAU(0): Supported detailed timing:
[ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
[ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
[ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
[ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
[ 8.245] (II) NOUVEAU(0): EDID (in hex):
[ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
[ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
[ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
[ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
[ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
[ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
[ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
[ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
[ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
P67a-GD65 System Freezes and Recovers During 3D gaming and Online Video
The Problem:
Temporary system freeze with audio stutter. The system recovers 30sec - 2min later.
Key presses made during freeze will execute after system recovers (ctrl+alt+delete for example)
Usually, but not always, I see an error message in the system tray and I do NOT experience bsod.
This happens seemingly at random from 3D accelerated applications, and web browsing. Games such as BF3 (moderate), WoW (seldom), Planetside 2 (frequently), Minecraft (seldom), Hawken (seldom), etc.
Also happens frequently in both Internet Explorer 9/10, Firefox, Chrome, and Steam store browser. Typically when watching steaming video (youtube, HULU, flow player, etc)
but Pandora audio streaming also seems to create the conditions where this happens.
Error Message:
"Display driver stopped responding and has recovered
Display driver NVIDIA Windows Kernal Mode Driver 314.07 stopped
responding and has successfully recovered"
The problem also shows up in the Windows reliability history with the following data:
Source
Windows
Summary
Video hardware error
Date
3/6/2013 9:11 PM
Status
Not reported
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name: LiveKernelEvent
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Files that help describe the problem
WD-20130306-2010.dmp
sysdata.xml
WERInternalMetadata.xml
Extra information about the problem
BCCode: 117
BCP1: FFFFFA8011E0C4E0
BCP2: FFFFF8800654A198
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
My System Hardware:
CPU: Intel i7 2600k @ 4.5ghz
Motherboard: MSI p67a-gd65 (B3 stepping)
Memory: G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
GPU: Originally MSI 6950 2GB. Replaced with EVGA 670 FTW 2GB.
PSU: CORSAIR HX Series HX850 850W
HDD: 3x Western Digital WD RE4 WD5003ABYX 500GB in Raid 0
OS: Windows 7 Home Premium SP1 with all updates
Case/Cooling: Silverstone Raven 2E with Thermalright silver arrow cpu heatsink
What I've tried:
Updated all motherboard drivers and bios (4.3) to current versions (no improvement)
Updated display drivers (in safe mode with driver sweeper. No improvement)
Updated Realtek Audio drivers for onboard sound (no improvement)
Updated Intel Rapid Storage drivers (no improvment)
Cleared CMOS and tested system at default settings with no overlock (no improvement)
Flashed 6950 back to 6950 stock bios and removed overclock (no improvement)
Replaced old 6950 with new GTX 670 (problem still occurs in the same exact way)
Tried GPU in 2nd PCIe slot. No improvement.
Checked GPU Temps. GTX 670 fan profile in EVGA Precision X set to keep temp below 70 degrees Celcius. Card maxes at 60 degrees under heavy gaming load.
Complete reformat of raid array with fresh install of Windows (4 different times) Seemed to help for a few days, then freezes came back
Ran OCCT and Prime 95 Torture tests separately for a few hours at stock and OC settings. System stable with core temps of high 50's overclocked, and low 40's stock.
Ran Memtest86 for 10 hours with zero errors.
Used digital multimeter to test 12v rail on PSU. Noted solid 12v reported. Didn't test other rails.
Unplugged PSU cables from motherboard and reattached firmly
Ran HD Tune and Data Life Guard Tools for error checking on hard disks. Zero errors found.
Disabled Windows Aero (no improvement)
Updated Adobe Flash Player to latest setting (no improvement)
Removed Adobe Flash Player (no improvement)
Turned off Adobe Flash hardware acceleration (no improvement)
*EDIT: Forgot that I also adjusted Nvidia driver profiles for apps that have frozen to include power preference to max performance
All of my hardware with the exception of the new 670 was purchased and configured back in February of 2011. This problem first occured in BF3 multiplayer sometime in early 2012,
and has gradually been happening more frequently. Web searches found many individuals with this error, but the solutions are all over the map, and I've tried just about everything that I've found.
I think I've narrowed the problem down to the motherboard, but I just can't find a clear answer or solution. Maybe it's the raid array? I really thought replacing the GPU would solve my trouble here
and I was...NOT happy when it happened again with the new 670 that I scored for $250 after amazon gift cards. I typically get kicked/disconnected during online game play when this happens and I'm ready to be done with it. I was hoping to fix the issue without needing to buy new hardware, but I don't see any other way at this point.
My patience runs thin. Please help!Quote from: Froggy Gremlin on 11-March-13, 15:28:36
Might want to ask for the special archive to return the mainboard to pre-Ivy support UEFI/BIOS and then test again with everything set to auto/stock/default.
Already tested that before updating to 4.3. I started having the problem on 1.8, then 1.J0, then 4.3.
Quote from: Bernhard on 11-March-13, 15:30:29
Just a shot in the dark.
The length of time that your CPU has been running at the OC could have accelerated the eventual degradation.
Have you tested your CPU in another board or do you have access to a "known good" CPU to test in your system ?
I do not have another 1155 lga board to test the cpu in unfortunately, hence the CPU stress testing. Based upon previous experiences with multiple overclocked systems that I've run at much more aggressive overclocks, I don't believe I'm seeing a processor failure, though I can't rule out the possibility.
Quote from: xmad on 11-March-13, 23:26:01
Quite a few components can cause this.
Do you have a friend that could lend you a psu to test? A weak of failing PSU can often be the cause of something like this?
No I don't have another PSU to test. I did use a digital multimeter to test the 12v rail, as well as the motherboard contacts for testing voltage to the cpu and system They were all right in line with what I'm seeing reported in the bios. I did not test these contacts while the system was under load however, so I may need to do it again. -
Unavoidable system freezes when playing games
Hi all,
I recently switched from Windows to Arch Linux for good and it's been an enjoyable experience so far. My only problem is system freezes that sometimes occur when putting load on the system.
Mostly I'm having the problem that games I'm playing will inevitably freeze at some point, might be 5 minutes after launching them, might be 2h. It isn't exclusive to games though, once or twice Chrome crashed when having a couple of tabs open and opening another YouTube tab or something like that.
Here's how it happens:
- My frame rate (in games) drops over a couple of seconds until I only see a slide show, then it's only a matter of seconds until the system (X?) freezes completely.
- simultaneously the sound begins to stutter and stops as well
- if I see it coming and manage to Alt+F4 out of the game it goes back to running normally, otherwise it freezes completely and my only option is to reboot or Alt+SysRq+R, Alt+SysRq+E which brings me back to my login manager.
About my system:
- latest Arch, upgraded a couple of times which didn't change anything
- Intel i5 CPU, Nvidia GPU with proprietary drivers
- Openbox as WM, no DE, but I had the same problem with GNOME and KDE before as well
Games I played on this system (and all crashed):
- CS:GO, Prison Architect, WoW on Wine
If someone could give me any hints how I could go about diagnosing/removing this problem I would be very grateful!
P.S. I didn't have any problems like this at all on Windows (7)Dec 04 18:48:39 archie dbus[239]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Dec 04 19:08:33 archie kernel: SysRq : Keyboard mode set to system default
Dec 04 19:08:36 archie kernel: SysRq : Terminate All Tasks
Dec 04 19:08:36 archie systemd-journal[155]: Journal stopped
Dec 04 19:08:36 archie systemd-journal[9737]: Permanent journal is using 232.0M (max allowed 4.0G, trying to leave 4.0G free of 63.2G available → current limit 4.0G).
Dec 04 19:08:36 archie systemd-journald[155]: Received SIGTERM.
Dec 04 19:08:36 archie systemd-journal[9737]: Journal started
Dec 04 19:08:36 archie dhcpcd[299]: received signal TERM from PID 0, stopping
Dec 04 19:08:36 archie dhcpcd[299]: enp2s0: removing interface
Dec 04 19:08:36 archie dhcpcd[299]: exited
Dec 04 19:08:36 archie lightdm[5302]: pam_unix(lightdm:session): session closed for user ricardo
Dec 04 19:08:36 archie dhcpcd[9725]: dhcpcd not running
Dec 04 19:08:36 archie lightdm[5302]: pam_systemd(lightdm:session): Failed to release session: Connection reset by peer
Dec 04 19:08:36 archie pulseaudio[5357]: Unable to read or parse data from client.
Dec 04 19:08:36 archie pulseaudio[5357]: PulseAudio information vanished from X11!
Dec 04 19:08:36 archie systemd[272]: Stopping Default.
Dec 04 19:08:36 archie systemd[5316]: Stopping Default.
Dec 04 19:08:36 archie systemd[272]: Stopped target Default.
Dec 04 19:08:36 archie systemd[5316]: Stopped target Default.
Dec 04 19:08:36 archie systemd[272]: Stopping Basic System.
Dec 04 19:08:36 archie systemd[5316]: Stopping Basic System.
Dec 04 19:08:36 archie systemd[272]: Stopped target Basic System.
Thanks for the hint, didn't know the journal yet. Just had another crash. The journal unfortunately doesn't seem to show anything fruitful concerning the crash. (which occured between the first two entries)
Maybe you are looking for
-
Invoice: How to use more than one Internal Table's info in one Table
Hi , I am doing an invoice, and have the info from internal table wa_itgen showing - Matnr, material description and quantity. I want to also invlude the info Unit Price and Total price on the table line, but can't seem to do it. I know that someone
-
Hello all, Does somebody can tell me how to know or to search wich tcode we must put in the field TCODE for the transaction SXDB ? For example, I want to upload vendor into SAP and in my text file, I put FK01 in TCODE in level BLF00 but SAP told me t
-
Maps goes online even though it's set not to
I noticed that whenever I open Maps on my N85, a data transfer occurs, which can be seen from the 3G icon turning into the 3.5G icon with the arrows underneath, as well as from the "Mobile Internet" Log entry created afterwards. Why this is strange i
-
Help Requested - Creating Solaris 10 x64 Virtual Machine on an ESX Server
Hi All, I have been trying to create a Solaris 10 64 bit Virtual Machine on ESX and VMWare server Virtualization Platform. One of the forum entries said - The installer doesn't really care. At every boot, the processor type will be determined and a 3
-
Hi, It might not be new problem! Everything works on the local host on all the major browsers. When uploading the test page to server (Bluehost), it gives me these two errors: SpryMenu.js requires SpryWidget.js! and then: SpryMenuBarKeyNavigationPlug