Suddenly can't access shared drives on LAN but can access shared folders
This just happened this past week. Prior to last Monday everything had been working fine for over a year. Here's the scenario:
I have a LAN with a Tower Computer, a Desktop and a Laptop. The tower computer has two external 2-bay cabinets connected via e-SATA. One cabinet has two drives configured as Raid 1 (i.e. 1 mirrored logical drive and has the 'shared
name' "Raid1-Array and the drive letter of Z: ), which is a repository for data that must be available to all computers on the LAN. The other cabinet has two individual drives used for backup (stored offsite and only installed once
a week). One of the latter is for backup of the "local" Tower (Drive G: - not shared), and the other is shared for LAN backup of the Laptop ('shared name' "LT-Backup" and Drive F:).
Suddenly this week, the laptop can no longer access the shared repository (Z:) nor its shared backup drive (F:) on the Tower. As a temporary solution for the backup, I shared the laptop's backup folders of F:, and
for some unknown reason the laptop can access those, but not the F: drive itself. When I try to access Z: or F: using File Explorer I get an error message saying:
"Windows cannot access \\TOWER-755\LT-Backup You do not have permission to access
\\TOWER-755\LT-Backup. Contact your network administrator to request access"
All of the computers are in the same "WORKGROUP" and the same "HomeGroup", and I've gone through all the Help & Support texts and have run every diagnostic that I could find, but all to no avail.
Another creepy thing is that the desktop (the third computer on the LAN/WORKGROUP/HomeGroup) CAN access the drives, but that computer is only here temporarily while I'm working on it. In light of this I'm assuming that the problem lies with the
Laptop, but for the life of me I can't figure out what/how.
I'd be very grateful for any/all help to resolve this mystery.
Capt. Dinosaur
any changes before this issue happen? any other device connected and facing same issue
did you check folder share permission setting?
how about you re-edit the setting for user name password
Similar Messages
-
Trying to access my 851w from outside my lan, but can access inside fine
Hi,
I purchased a 851w to use as my home router and to learn more about the cisco IOS. I have been spending some time studying for CCENT/CCNA and so far I have enjoyed learning as I go. However, I am having problems accessing this router from a remote location via ssh. I can access it just fine from my lan, but not outside it from another location. Currently, I am not using this router for internet access or anything else other than learning about the IOS, and it is connected to a basic dlink wireless router dir-615. I have port forwarding setup on the dlink that any traffic coming in on port 22 is directed to the 851w at 192.168.0.150. I also have the 851w connected with a crossover cable to a switch that is connected to the dlink router.
Like I said, I can connect just fine from my lan, but can't connect from outside. I have tried a few different things but nothing works. I also use Teraterm to connect, but have tried Putty too. I also use ddns to access it, but I have also tried the wan ip address of the dlink with no luck.
Could someone please take a look at my very basic running config and explain what I might need to do different?
Thanks in advance.
SeanHi and thanks a bunch for your quick response.
No, I can't ping anything other than my main router which I have setup as the gateway so why is that? For example,
ip default-gateway 192.168.0.1
Wouldn't it automatically send anything it doesn't know about to the 192.168.0.0/24 router?
I have one of the switch ports, Fast Ethernet 0, connected to another switch connected to the dlink router. I have tried different ports but it didn't change anything. I don't have anything connected to the wan port of the 851w. I was trying to simulate remote access of a switch on an internal network. My next step would be to make the 851w my default router and then try to access it from the outside, but I wanted to succeed this way first.
optimus#show ip int br
Interface IP-Address OK? Method Status Protocol
Dot11Radio0 unassigned YES unset administratively down down
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset up down
FastEthernet4 unassigned YES unset administratively down down
Vlan1 192.168.0.150 YES manual up up
Yes, my internal pc is on the 192.168.0.0/24 subnet.
Best Regards,
Sean -
Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV
Can access Apple TV via airplay, but can't get to internet or iMac from Apple TV. Whenever I try to put my info in it says to try later. When I test network it says network time has not been set. It has worked previously.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful. -
My songs that I purchased on my itunes account from my dad's computer will not play on my new computer, I have access to my entire account but can only play songs purchased using my new computer. Does anyone have any ideas?
Hi Kevin,
Have you authorized the Computer to your Apple ID?
If not, sign on to iTunes.
Then got to the Store menu option at the top of the screen (CTL+B if it is not showing), and click on it to display the dropdown, and select Authorize this computer.
If that doesn't work, then sign on your Dad's iTunes ID and repeat the Authorization process.
Cheers,
GB -
iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2. -
Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
-
Dears,
I have some PDF can show Chinese word in Adobe reader but can't show in Firefox version 19.0.1.Please help.
Regards
Brian Wong
RVD department(Hong Kong Government)
Phone:852-21508158Dear Support,
May we have your email to discuss the problem?I want to send you the problem file test.pdf for you reference.Also we want to know any method,format ,style of font will process this error so that we can aware of it.
Regards
Brian Wong
RVD department(Hong Kong Government) Phone:852-21508158 -
Can't get itunes updates on ipad, but can get everything else...genius, purchases, etc. When I select "updates" screen is blank. Any ideas??
The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg -
HT204053 got 2 iphones can sync both on my mac book but can't do both on the pc?
got 2 iphones can sync both on my mac book but can't do both on the pc?
By design any iPhone will Only Sync to One iTunes Library at a time.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/ -
I CAN SELECT A ITEM WITH TRACK PAD, But can not open the item
Mac Book 15 inch
OS X 10.10
New to Mac
Using track pad I can select an item by one click but can not open this item with 2 clicks.Go to System Preferences>Track pad and check the Secondary Click settings
-
I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.
Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved. -
I can receive emails from three different accounts but can't send a photo from them. It says the server doesn't allow relaying???
I have a hard time describing this exactly, so I copied this from another thread. This seems to be a recent issue with AOL email accounts on the iPad the past few days. I have two AOL accounts and they work fine. See if this works for you.
+If you cannot send, under the smtp server your user name and password must be entered even though the prompt tells you it is optional. As a mobile device the port used is different from the one I would normally use if at home and therefore validation is required by use of the password. The normal port for the smtp server is 110 but to use on a mobile unit like the iPad port 587 is used.+
The big thing is to make sure that your username and password are filled in - Select your email account in the Mail setting and tap on the arrow next to the smtp server under the Outgoing Mail Server and then tap on the arrow next to smtp server under the Primary Server and fill in the information in there.
Some times you have to resort to deleting the account and starting over again. -
TS3899 I can recieve mail on my ipad air but can't send emails. Why is this
I can receive mail on my Ipad air but can't send them. They are stuck in the out box.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Can get my iPad to locate iPhone but can't seem to get cloud app on my iPad. My phone and iPad don't display the iPad in the device corner?
You went from the wrong direction. Start with Nikon website and the WU-1a adapter. click on the download at the App store....
http://www.nikonusa.com/en/Nikon-Products/Product/Wireless/27081/WU-1a-Wireless- Mobile-Adapter.html
It will take you to the App.
Maybe you are looking for
-
Cisco ISE Guest Portal - DNS Issue - External Zone
Hello, I have a customer that has the following sceanrio : In a wireless deployment and a Cisco ISE 1.1.3 deployment with CWA, when the wireless guest receives the redictect URL from ISE (URL to access the ISE Guest Portal), this URL is based on t
-
I have the background color of Firefox set to black so that pages are black with light colored text. However, when Firefox is loading, and when I open a new tab or window, the page is initially white while searching for the website, then turns black
-
How can I copy text in Adobe Digital Editions?
How can I copy text in Adobe Digital Editions for an eBook that I have purchased?
-
Idoc packaging for Receiver Idoc adapter in 7.11
We are using PI 7.11. And, I have a File to Idoc scenario. I am trying to find an Idoc packaging option for Receiver Idoc adapter. Any suggestions on how to do configure thi scenario? Thanks abhinaya4321 Edited by: abhinaya4321 on Dec 3, 2011 12:15 P
-
Is it possible to enable Java in oracle 10g express with the oracle jvm?
I've oracle 10g express installed. I would like to create java stored procedures in a schema. But, how do I have the database java-enabled?