Suddenly Can't Connect to Network - related to iPod/iTunes updates????
My APExpress that boosts the signal for my wife's iMac (lamp) was blinking amber this morning. My APExpress that my printer connects to showed green. I tried to connect my iMactel to the network, but oddly it asked for the password and then wouldn't accept the correct password, but it does see the network. AirPort Utility doesn't see any Apple Networks. My base station is an APExtreme.
I have made no changes except for installing the latest versions of iTunes and iPod touch software yesterday.
Well, I unplugged my APExtreme for a while, plugged in again and filled in the old network name and password and it connected. The two APExresses are now green.
My network has been active for several years, but I have never had this happen before. All's well that ends well.
Similar Messages
-
Help - Hyper-V suddenly can't connect to network
hi there,
need help please. we just installed Hyper-v 2008 R2 on Host with Windows 2008 R2 enterprise.
first time is ok, VM can connect to real network, and other PC in the same network can connect to this VM.
but now, suddenly the VM can't communicate to each other on same network, and others can't detect the VM.
try to diagnose the network, still no effect.
any advice please?
also, when we add network card as a virtual network, the system will create another virtual private network. what is the best practice to configure this one (a real network card, and its virtual private network card)?
thanks in advanceproblem occurs from the driver. reinstall the driver and ..done.thanks
-
My Apple TV suddenly can't find my network and tells me it is not connected..help? I have reset my time capsule and have all the latest updates. My iPhone and ipad do not show airplay even though I have it turned on in Apple TV.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device. -
my ipad 4 has been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any ideas?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Suddenly can't connect to windows server
I suddenly can't connect to the windows server. The username and password is correct, but it says "Connection Failed: Unknown user, incorrect password, or login is disabled. Please retype the name and password or contact the server's administrator." It pings the server as well. My internet and email works fine. The IT guys can't figure it out either, but they are not mac gurus. Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information. I also tried connecting through the server alias under the network and its the connetion failed as going through Connnect to Server and entering it as AFP://ipaddress.
Can it be from the 10.4.11 update? It was fine before the update I believe - but I can't recall for sure. I'm a lone mac user in a very pc company, so any mac expert advice would be helpful.
Is just strange since I have no problems connecting to our work email via GroupWise.Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information.
Yes for any previous connection, Macs will send what's in Keychain Access, even if it's wrong, before you get asked... delete that reference in Keychain Access. -
Suddenly can't connect to music store
i suddenly can't connect to the music store. When I try to connect to the music store I get:
iTunes could not connect to the Music Store. The network connection was reset. Make sure your network connectionis active and try again.
I also haven't been able to connect to ichat. My internet is working. I can view websites and everything. I don't know what's going on or why. It's been going on for a couple days. I'd be grateful for any help!working!
-
HT4972 can't connect to network with linksys e2500
Can't connect to network with linksys E2500. Can anyone help me?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
having trouble with imessage since i updated to the ios7 cant get it to connect to imessage when i use my apple id says can not connect check network connection and my network connection is fine does anyone know what to do to fix this
i have the same problem but i didnt update
-
My iphone suddenly can't connect to itune but my ipad can still connect.
my iphone suddenly can't connect to itune but my ipad can still connect. i am using window 7 and the latest itune.
Did a diagnostic test and this is the result.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite P850
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 772513C00B220A08
Current user is an administrator.
The current local date and time is 2015-01-29 01:18:49.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is not supported. (16002)
Video Display Information
NVIDIA, NVIDIA GeForce GT 630M
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26. Device is working properly.
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D. Device is working properly.
Intel(R) USB 3.0 eXtensible Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano running firmware version 1.3.1
Serial Number: 7L******SZB
iPhone 4 (GSM) running firmware version 7.1.2
Serial Number: 68*****QA4S
iPad (3rd Generation) (Wi-Fi + Cellular) running firmware version 8.1.2
Serial Number: DYVH******GH
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
Itunes sudden can't connect with itunes store, error code 11556
Sudden can't connect with itues store, error code 11556
Try these discussions...
https://discussions.apple.com/message/18950811#18950811
https://discussions.apple.com/message/20057934#20057934
FRom the More Like This section on the right. -
Tenant Administrator can't connect VM Network to NVGRE Gateway.
Tenant Administrator can't connect VM Network to NVGRE Gateway.
Just no "Connectivity" tab in VM Network properties when connected to VMM as Tenant Administrator...
Is it normal or a bug?Hi, from PowerShell you should be able to add gateway to VM Network with the following command:
Add-SCVMNetworkGateway -Name <String> -VMNetwork <VMNetwork>
[-EnableBGP <Boolean> ] -
Hi everyone! WE just got an ipod touch 8G. We do have wireless internet, but can't join the network with the ipod touch. Message comes up.."unable to join the network".....very frustrating! We have tried all trouble-shooting suggestions on the site, but nothing is working. Anyone out there got any ideas for us?? The router is a Linksys WRT120N.
Thanks for any help any one can give!!!Does the iPod connect to other neworks?
Do other devices connect to the network?
What encryption are you using?
How you tried changing the type of encruption? Changing to no encryption? -
I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?
You would get better response from the iTunes community forum.
Have a nice day! -
How can i connect my iphone to a new itunes library without losing my contacts and photos ?
how can i connect my iphone to a new itunes library without losing my contacts and photos ?
Is the new iTunes library on a different computer, or the same computer?
Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact. -
I have just brought 2 mini's for my boys for xmas. 1. can I connect them both to my existing Itunes account or do I need to set up something different. and 2. can they be used on their dads account as well as mine, or only one?
You can set them up with your Apple ID if you want to. You can also set them up with their dad's Apple ID. Depending on how old the boys are, you can even let then have their own Apple ID's. The one thing that you don't want to do is have them use more than one Apple ID on their iPads.
If you want to be able to share purchased content, then setting them up with either your ID or your husband's (?) ID would be the way to go. If the boys share an ID with one of you, they can download content that you have already purchased without having to pay for it again.
If you and have the financial wherewithal to allow them to purchase their own individual content, I would recommend letting them have their own Apple ID. This way, as they grow older and eventually move on, they will have their own accounts, their own purchases .... No ties needed to your ID or to dad's ID. FaceTime and Messages will be a little easier to set up if they have their own ID's and they can have their own iCloud accounts as well. However, they must be 13 years old in order to have an Apple ID and iTunes account. If they are under 13, then it's a no brainer you will have to use yours or their father's ID.
Whatever you decide to do, just don't switch from one ID to another ID on the iPads. That gets confusing and they could end up locking themselves out of one of the ID's for 90 days if they download a past purchase using a different ID.
Maybe you are looking for
-
How to use one SessionInfo for many Frame
Hi Sathish; thank's for your answer but How do this? thank you
-
Does anyone know, what exactly the transactions 'BUTI' or 'BUTJ' are doing? I'm actualy searching for a starting point to migrate (non sap) business partner informations via BDT. Can someone give me a hint? Thanks
-
How to read the decimal portion of a double number? (using scanner method)
hello Java pros.... I need to read the integer and decimal part of a double number, one independently of the other. I must be able to assign the integer part to a variable, and the decimal part to a different variable. Is there a method that does wha
-
Dynamic Safety Stock - Custom logic
Hi, Are there any exits / enhancements where we can build customer specific logic to periodically update Safety Stock values in the Material Master (MRP Area)? Thanks. Raj
-
I inadvertently allowed the Best Lyrics add on to be installed for Firefox. It has annoying adds and sometimes links to malicious software. It can be disabled or removed from a session and become non functional after a Firefox restart but each time t