Suddenly can't connect to tv

i've been using my tv as an external monitor to watch itunes content for some time now. until the last week, all i had to to was plug in the mini-dvi to s-video cable that connects to the video-in jacks in the back of the tv, and it would recognize that i had plugged it in, adjust my laptop display resolution, and run the tv as a mirrored monitor. no sweat.
just in the past week, however, when i plug it in nothing happens. it doesn't recognize the tv, nor does the laptop display adjust itself. i get a different window in system preferences that includes a bunch of different options for refresh rate (50 mhz, 60mhz, etc.) and resolutions (640x480, 800x600, etc.)...none of which push anything to the tv screen.
i've tried the resetting the PRAM, deleting the com.apple.windowserver.plist file from the preferences folder, and resetting the PRAM again, nothing is working.
what i don't understand is that this worked like a charm for months, no problem, but now it just seems to have killed itself...what's going on here?

As far as I can tell I have the same problem.
Worked fine for a year and then about a week and half ago it stopped. Hadn't changed anything.
Tried all the resolution/refresh rates, nothing.
Anyone know what's happening here?

Similar Messages

  • Suddenly can't connect to windows server

    I suddenly can't connect to the windows server. The username and password is correct, but it says "Connection Failed: Unknown user, incorrect password, or login is disabled. Please retype the name and password or contact the server's administrator." It pings the server as well. My internet and email works fine. The IT guys can't figure it out either, but they are not mac gurus. Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information. I also tried connecting through the server alias under the network and its the connetion failed as going through Connnect to Server and entering it as AFP://ipaddress.
    Can it be from the 10.4.11 update? It was fine before the update I believe - but I can't recall for sure. I'm a lone mac user in a very pc company, so any mac expert advice would be helpful.
    Is just strange since I have no problems connecting to our work email via GroupWise.

    Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information.
    Yes for any previous connection, Macs will send what's in Keychain Access, even if it's wrong, before you get asked... delete that reference in Keychain Access.

  • Suddenly can't connect to music store

    i suddenly can't connect to the music store. When I try to connect to the music store I get:
    iTunes could not connect to the Music Store. The network connection was reset. Make sure your network connectionis active and try again.
    I also haven't been able to connect to ichat. My internet is working. I can view websites and everything. I don't know what's going on or why. It's been going on for a couple days. I'd be grateful for any help!

    working!

  • My iphone suddenly can't connect to itune but my ipad can still connect.

    my iphone suddenly can't connect to itune but my ipad can still connect. i am using window 7 and the latest itune.

    Did a diagnostic test and this is the result.
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    TOSHIBA Satellite P850
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 772513C00B220A08
    Current user is an administrator.
    The current local date and time is 2015-01-29 01:18:49.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is not supported. (16002)
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 630M 
    Intel Corporation, Intel(R) HD Graphics 4000
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26.  Device is working properly.
    Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D.  Device is working properly.
    Intel(R) USB 3.0 eXtensible Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano running firmware version 1.3.1
    Serial Number: 7L******SZB
    iPhone 4 (GSM) running firmware version 7.1.2
    Serial Number: 68*****QA4S
    iPad (3rd Generation) (Wi-Fi + Cellular) running firmware version 8.1.2
    Serial Number: DYVH******GH
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

  • Itunes sudden can't connect with itunes store, error code 11556

    Sudden can't connect with itues store, error code 11556

    Try these discussions...
    https://discussions.apple.com/message/18950811#18950811
    https://discussions.apple.com/message/20057934#20057934
    FRom the  More Like This  section on the right.

  • TS1398 have been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any idea

    my ipad 4 has been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any ideas?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 10.6.8 MBPro Screen Sharing suddenly can not connect to our other Macs.

    We've used Screen Sharing from our MBPros for the past few years to manage our Mac file & media servers. Last year we replaced our G5 file server with a Mac Mini with Lion server. No problems - we could still use Screen Sharing to manage both this Lion file server and the Snow Leopard MacPro that's hooked up to our TV (among other things).
    Friday morning my MBP could not see or connect to the Lion file server - the MBPs have the Lion server's data drives in Login Items so they mount when we log in. I also cound not Screen Share to either the Lion server or the SL MacPro. I checked the MBP's ethernet connection and could get to our router and the internet. When I tried to connect via Screen Sharing (by using the Share Screen... button in a Finder window, by using the Connect to Server command with vnc:// protocol, or by using the ScreenSharing menulet) I would get the "Connecting to Lion server" alert but nothing further. I left it for 10 minutes or so and it eventually disappeared but the connection never opened.
    I checked the two servers and both were up and running. From the SL MacPro I could use Screen Sharing to get to the Lion server - and my MBPro too. From the Lion server I could Screen Share to the MacPro and my MBPro also.
    The problem appeared to be with my MBPro. I switched to an unprivledged user account on it and found I could then get to both servers using Screen Sharing. So it was just my account on the MBPro. Rebooting did not help. Turning on AirPort, connecting to our home AirPort Extreme and unplugging the ethernet cable did not change anything with my account connecting to the servers.
    I figured something somehow got pranged in my account's credentials. I used Keychain Access to delete all keychains containing the servers' names, IP addresses or sharing. I was asked for my credentials when I mounted the server's shared drives, but not when I tried Screen Sharing - got the same "Connecting to Lion server" or "Connecting to media server" dialogues and was never asked for username or password, but never connected either.
    I cleared all caches using the utility Maintenance in case my MBPro was using invalid cached info. No improvement.
    Saturday morning I shut down everything on our entire network - FiOS "modem"/router, Netgear gigabit switch, AirPort Snow, AirPort Extreme, MacPro, MacMini, both MacBookPros... even the FiOS cable box. Still no improvement.
    IPv6 is disabled on the Lion server. All the Macs have all curent updates applied.
    I've spent most of today Googling for solutions and trying them out. None have worked - though I see several very recent reports in these Apple Communities about Screen Sharing suddenly not working.
    I really do not want to have to move to a new account on my MBP - and what's to say it won't happen again? Anyone have other suggestions?

    sunnovagun!
    Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
    My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
    Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
    Probably didn't hurt though to reboot the entire network...

  • Suddenly Can't Connect to Flash Debugger

    Out of the blue today my flex builder stopped breaking at
    breakpoints. While trying to troubleshoot I discovered that if I
    right-click on the flash application, and choose Debugger, I can
    try to connect on either LocalHost or Other Machine. I clicked
    Connect with LocalHost selected and got the following error:
    "A connection to the Debugger or Profiler could not be
    established by Adobe Flash Player 9."
    I tried to use Other Machine with my local IP address, as
    suggested in another forum, but it also failed.
    I've got the latest Flash debugger, and my firewall is turned
    off. Does anyone have a clue as to why this would suddenly start
    happening after months of the debugger working?

    I checked out my Flash Version on the site above and it looks
    like it's fine.
    quote:
    Your Player Version: WIN 9,0,124,0
    Debug Player: Yes
    Operating System: Windows XP
    Video Capable: Yes
    Audio Capable: Yes
    Local File I/O Enabled: Yes
    The odd thing is that the trouble seemed to start out of the
    blue. I've been debugging in FireFox for months, then one morning
    it can't connect to the debugger. Luckily I can debug in IE, but I
    still don't know what's up with FireFox.
    Thanks for the suggestions.

  • Suddenly can't connect to Yahoo email?  "Incorrect username or password".

    I thought I was past all the email headaches I've had with the X. Its certainly not a Blackberry...lol
    Everything has been working fine for the last month and now all of a sudden it wont connect to Yahoo. I've tried removing the account and setting it up again. I've tried every different suggested setting. I got it to work and it synced up all my yahoo email and then an hour later it wouldnt connect again. The error message is "Incorrect username or password".  I've entered the correct information.....trust me.
    I am at wits end with this phone. The email problems have been going on since the Droid came out. Why hasnt Verizon resolved the problem?
    Any suggestions as to what I can do to get my problem correct? I love the phone...but hate the email functionality.

    Not a Verizon issue...a Droid issue. My bad...I see I stated verizon in the first post. I meant to say motorola.
     You can search the internet and find many people have had the same thing.. I've had lots of problems with bellsouth also....and so have many others. I still cant , and never have been able to, send an attachment with my bellsouth account.. I had a Verizon Blackberry for years and never once had trouble accessing yahoo or bellsouth. I dont want to switch back. I think the Droid is a cool phone......but if I'm paying $30 for a data plan and need to get my emails I expect to get my emails.

  • Suddenly can't connect to express, unless I plug ethernet into it.

    Setup
    cable box -> wp54G ->linux mythtv box (ignore for rest of story)
    2 laptops connect wirelessly to the network.
    1 mac mini connects wirelessly to the network.
    1 Epson printer and some speakers connecting to network via express. (not using for internet at all)
    All of a sudden, I can't connect to the express at all. I re-set the thing, but couldn't connect to it wirelessly. Once I ran an cable to the express, I could see and re-configure it. but the moment I take the cable off, it goes blinking amber...
    The mini can print to my printer hooked up, but iTunes doens't show the remote speakers as an option any longer leading me to believe the wireless part of the express is damaged. I assume the printer works due to a wireless connection to the wp54g, which then navigates the cable to the express, and on to the printer...
    any ideas? it's annoying the !@#$%^&*() out of me!
    thanks in advance,
    vm
    mini (ppc)   Mac OS X (10.4.6)  

    Hi Videoman413
    Try doing a factory reset, using the information at the bottom the Resetting AirPort Express article.
    Then using Airport Setup Assistant join your existing network as a client, and hopefully the rest will fall into place for you!
    Will

  • Suddenly can't connect to certain websites

    This week I discovered that I am unable to connect to several websites I am accustomed to visiting frequently. These are not 404 errors. Safari and Firefox both give me the message that they "can't connect to the server," and Netscape says the "connection was not accepted." The problem websites I discoverd so far are nytimes.com, daypop.com, democracynow.org
    I had monkeyed with some of my system settings including activating the firewall which I deactivated with no better results. I cannot remember if there
    was anything else I did which could affect the web connections. I repaired permissions just in case--no change. It was suggested that I make one of the problem sites my home page on Safari--that did no good.
    I sent a message to the NY Times via webmast@nytimes. com asking if there was some reason I should suddenly have a problem connecting--it didn't get spit back at me, but it has yet to be answered.
    Out of ideas as to what else to try. Any help out there?
    Thanks.
    Noel Gilmore

    Uh-oh. Very bad that so far NO ONE has any idea how to help. I've put up the question on a couple of Mac site forums which got me to the Network Utility. I tried using it but for the most part can't interpret the results. If posting them will enlighten anyone, I'd be glad to do that.
    Someone suggested that I needed to use a different DNS. Now I'm into territory I don't really understand. I went to my ISP's support website and found the addresses of the primary and secondary DNS. My TCP/IP settings didn't require that I input any DNS address, but armed with them, I entered the secondary address and tried to connect again, but no luck.
    Aaarghhh!
    noelieg
    G5 iMac   Mac OS X (10.4.5)  

  • Suddenly can't connect to home wireless network

    All of a sudden I can't connect to my home wireless network - always has worked perfectly.  Now I get a box asking for the password, and although I type it in correctly it keeps saying "incorrect password."  I thought I'd delete it and re-establish it, but it doesn't show up in the Managed Network settings.  Any ideas what is going on?

    On the problem computer, go to Control Panel > Printers and delete all instances of the printer.
    Next, print a Wireless Network Test from the front of the printer (Network menu).  Note the printer's IP address.
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Suddenly can't connect to ichat or itunes music store

    suddenly i can't connect to ichat or itunes music store. when i try to connect on ichat i get this message:
    Could not connect to AIM The connection to the host was unexpectedly lost
    When I try to connect to the music store I get:
    iTunes could not connect to the Music Store. The network connection was reset. Make sure your network connectionis active and try again.
    My internet is working. I can view websites and everything. I don't know what's going on or why. It's been going on for a couple days. I'd be grateful for any help!

    ah yes, i had the flets program last year i believe. then i switched to OCN.
    if you want to try to connect with another chat program besides iChat, we can try that. you can send me an email with an im name to [email protected] i had some problems with flets and had to call them about it, but it didnt really get resolved so i just switched when i moved to a bigger city.
    i just iChatted with a mac user in colorado today, and i just checked and i can connect to the itunes store. are you trying to connect to the japanese itunes store, or another one?

  • IMac suddenly can't connect to wireless!

    My iMac suddenly refuses to connect to wireless! It worked fine before.
    Tried everything including resetting the wireless router.
    It always said that my password is invalid... My password is correct!
    Can anybody help me? Thanks!

    I'm having the same problem.  I have a time machine that I use for my wireless router.  I connect wirelessly using my Macbook Air.  It has worked fine for months.  Today, about 4 hours ago, my wireless connection stopped working.  When I connect via ethernet directly, it works.  I know it's not my router, because I also tried a spare Airport Express and that doesn't work either.  I'm going to try restoring the time machine to its factory settings and configure it from scratch to see if that works.  I'll post back with the results.

  • TS1398 Suddenly can't connect on ipod touch to "crime city" app after a year of game play. Anyone have same problem? iPod touch 4th gen.

    Can't connect to crime city app on my iPod touch suddenly. Any suggestions? I did a hard reset already, don't help.

    Maybe here:
    iOS: Troubleshooting applications purchased from the App Store

  • Suddenly can't connect to shared computers or screen share

    For some reason I can no longer connect to my shared computers. I can however connect to MY computer from my shared computers, if that makes sense.
    From my own computer, when I go to my shared list in the finder, I click on a computer (normally it all automatically connects because I have the password remembered), I click "connect as" and I never get any response, sometimes a "connection failed" I know file sharing is enabled on all computers.
    Is there a way to refresh my list? What can I do to reconnect to my shared computers? This seems to have been happenings since I last updated the OS.
    Also, I can no longer do a screen share where I was doing this regularly every day.
    Thanks
    Dan
    Message was edited by: Daniel Peck

    I tried opening up the firewall and allowed all incoming connections.
    no luck
    I checked the log file and here's what it had, I don't know what it all means:
    7/27/08 6:07:13 PM com.apple.launchd[202] ([0x0-0x5be5be].dotmacsyncclient[12981]) Exited with exit code: 114
    7/27/08 8:48:56 PM com.apple.backupd[8961] Found partially deleted backup - trying again to delete: 2008-07-26-184903
    7/28/08 7:30:38 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[5451]) Exited: Terminated
    7/28/08 7:30:38 AM com.apple.launchd[1] (com.apple.ScreenSharing.server[14496]) Exited: Terminated
    7/28/08 8:06:28 AM PDFpen[14572] .sdef error: Operation could not be completed. (NSXMLParserErrorDomain error 1549.)
    7/28/08 8:06:28 AM PDFpen[14572] line number: 2
    7/28/08 8:06:28 AM PDFpen[14572] .sdef error: Operation could not be completed. (NSXMLParserErrorDomain error 1549.)
    7/28/08 8:06:28 AM PDFpen[14572] line number: 2
    7/28/08 8:06:28 AM PDFpen[14572] _NSMacOSTypeFromString(): string 'color' is not exactly 4 characters long.
    7/28/08 8:28:34 AM firefox-bin[14691] Error loading /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin: dlopen(/Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin, 262): Library not loaded: /usr/lib/libcrypto.0.9.dylib
    Referenced from: /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin
    Reason: no suitable image found. Did find:
    /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    7/28/08 8:28:34 AM firefox-bin[14691] Error loading /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin: dlopen(/Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin, 262): Library not loaded: /usr/lib/libcrypto.0.9.dylib
    Referenced from: /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin
    Reason: no suitable image found. Did find:
    /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    7/28/08 8:28:32 AM [0x0-0x657657].org.mozilla.firefox ### MRJPlugin: getPluginBundle() here. ###
    7/28/08 8:28:33 AM [0x0-0x657657].org.mozilla.firefox ### MRJPlugin: CFBundleGetBundleWithIdentifier() succeeded. ###
    7/28/08 8:28:33 AM [0x0-0x657657].org.mozilla.firefox ### MRJPlugin: CFURLGetFSRef() succeeded. ###
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox 2008-07-28 08:28:34.745 firefox-bin[14691:10b] Error loading /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin: dlopen(/Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin, 262): Library not loaded: /usr/lib/libcrypto.0.9.dylib
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox Referenced from: /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox Reason: no suitable image found. Did find:
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox 2008-07-28 08:28:34.746 firefox-bin[14691:10b] Error loading /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin: dlopen(/Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin, 262): Library not loaded: /usr/lib/libcrypto.0.9.dylib
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox Referenced from: /Library/Internet Plug-Ins/Photo Center Plugin.plugin/Contents/MacOS/Photo Center Plugin
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox Reason: no suitable image found. Did find:
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    7/28/08 8:28:34 AM [0x0-0x657657].org.mozilla.firefox /usr/lib/libcrypto.0.9.dylib: mach-o, but wrong architecture
    7/28/08 8:38:27 AM com.apple.launchd[202] (0x10c9a0.Locum[14726]) Exited: Terminated
    7/28/08 8:38:32 AM Disk Utility[14727] ********
    7/28/08 8:38:32 AM Disk Utility[14727] Disk Utility started.
    7/28/08 8:38:39 AM Disk Utility[14727] Repairing permissions for “Macintosh HD”
    7/28/08 8:38:39 AM Disk Utility[14727] Reading permissions database.
    7/28/08 8:38:39 AM Disk Utility[14727] Reading the permissions database can take several minutes.
    7/28/08 8:38:58 AM SystemUIServer[222] found device
    7/28/08 8:39:38 AM Backup[7930] * -[NSConditionLock unlockWithCondition:]: lock (<NSConditionLock: 0x1453c380> '(null)') unlocked from thread which did not lock it
    7/28/08 8:39:38 AM Backup[7930] * Break on _NSLockError() to debug.
    7/28/08 8:39:38 AM Backup[7930] * -[NSConditionLock dealloc]: lock (<NSConditionLock: 0x1453c380> '(null)') deallocated while still in use
    7/28/08 8:39:38 AM Backup[7930] * Break on _NSLockError() to debug.
    7/28/08 8:40:26 AM com.apple.launchd[202] (0x10e0e0.Locum[14762]) Exited: Terminated
    7/28/08 8:40:30 AM com.apple.launchd[202] (0x10e0e0.Locum[14767]) Exited: Terminated
    7/28/08 8:41:15 AM com.apple.launchd[202] (0x10de40.Locum[14770]) Exited: Terminated
    7/28/08 8:43:35 AM Disk Utility[14727] Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    7/28/08 8:43:35 AM Disk Utility[14727] Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    7/28/08 8:43:35 AM Disk Utility[14727] Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    7/28/08 8:43:35 AM Disk Utility[14727] Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    7/28/08 8:43:35 AM Disk Utility[14727] Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    7/28/08 8:43:35 AM Disk Utility[14727] Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    7/28/08 8:44:30 AM Disk Utility[14727] Group differs on "private/etc/cups", should be 0, group is 26.
    7/28/08 8:44:36 AM Disk Utility[14727]
    7/28/08 8:44:36 AM Disk Utility[14727] Permissions repair complete
    7/28/08 8:44:36 AM Disk Utility[14727]
    7/28/08 8:44:36 AM Disk Utility[14727]
    7/28/08 9:18:16 AM com.apple.launchd[202] (0x10a8a0.Locum[14872]) Exited: Terminated
    7/28/08 11:24:59 AM com.apple.launchd[202] ([0x0-0xe00e].com.apple.finder[224]) Exited: Terminated
    7/28/08 12:53:56 PM com.apple.launchd[202] ([0x0-0x67d67d].com.apple.finder[15179]) Exited: Terminated
    7/28/08 12:56:38 PM com.apple.launchd[202] ([0x0-0x68c68c].com.apple.finder[15571]) Exited: Terminated
    Still no luck.

Maybe you are looking for

  • Connecting Ethernet Macs & printer with wireless network?

    I have a small LAN (500MHz Cube, iMAC, Tally T8016 Laser Printer) handled by a Belkin 4-port router, connected to a cable modem. I would like to incorporate a new Mac mini, a MacBook and an AirportExtreme Base Station but have some problems. Connecti

  • How did Apple screw up the maps app this badly?

    I am normally not a complainer, but rather appreciate great technology. However, I am shocked beyond description about how badly Apple screwed up the maps application in IOS 6. The maps application is the by far the most frequently used and most usef

  • How to bring InfoAreas into BEx Analyzer

    Hi Experts, Q1: I have a total of 24 InfoAreas in InfoProvider(Admn Workbench), but I do see only 7 of them in Open Query dialog box of BEx Analyzer. How do I bring in a particular InfoArea(and all related objects) into Open Query Dialog box. Q2: I w

  • Photomerge on PS CC 2014 does nothing and goes away after clicking go

    I can open the Photomerge window and choose the images I would like to merge. When I'm ready and click go the window closes and then nothing happens. I am running an iMac 3.2 Ghz Intel Core i5 with 8 GB of ram.  I have a NVIDIA GeForce GT 855M 1024 M

  • Error -1074118625 with PXI-4071 and PXI-2527

    When using the LabVIEW IVI drivers for PXI-4071 and PXI-2527, I receive an error -1074118625 in TestStand.  The sequence initializes the MUX, init DMM, connects the MUX, waits for debounce, and then upon reading from the DMM, I receive this error. Er