Suddenly can't merge any anchor points?

I am busy working on creating a big object with many split ways, you can compare it with the streets of NY or something,
Now the first 5-6 hours went great combining anchor points so it is one big object. However now suddenly Illustrator is giving me an error on mergin anchor points, i do them exactly the same as i did the first 5 to 6 hours?
How can i still merge anchor points, i can't find a solution because it got broken in the progress and not on the start like everyone else their problem with merging anchor points....
Please help me and thanks

theraaf,
I apologize for the figure of speech (end of the line).
What I meant was: You can only join two paths end to end, by end Anchor Points.
It sounds as if you are trying to join the end point (or an inner point) of one path to an inner point of the other, like a road junction or a crossing, and that is impossible.
There can only be two segments from each Anchor Point.

Similar Messages

IPhoto 09: I suddenly can't import any more jpg-photos created by scanner with SilverFast Ai

I suddenly can't import any more jpg-pictures created by scanner with SilverFast. iPhoto says 'unknown format'. What can I do?

Since you can import into a library in the other user account there is something in your account that is the culprit. First make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Oost back with the results as there is one more text of your account that can be done if the above didn't help.
OT

Cs6 , how can i add a anchor point in the curve in the channel Red or Green?

Hi
how can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB
and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustamanent tool
i can do it with ctrl+m and call the curve
but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev photoshop)?
thanks

thanks that's correct! thanks
but it's not 100% correct
to add a multiple points in rgb shift+click doesn't work!
from adobe
Keyboard shortcuts: Curves
You can use these keyboard shortcuts for Curves:
To set a point on the curve for the selected color in each color component channel (but not in the composite channel), Shift+Ctrl-click (Windows) or Shift+Command-click (Mac OS) in the image.
To select multiple points, Shift-click points on the curve. Selected points are filled with black.
To deselect all points on the curve, click in the grid, or press Ctrl‑D (Windows) or Command-D (Mac OS).
To select the next higher point on the curve, press the plus key; to select the next lowest, press the minus key.
To move selected points on the curve, press the arrow keys.
(Curves dialog box) To set a point on the curve for the current channel, Ctrl-click (Windows) or Command-click (Mac OS) in the image.
If you’re instead using the Curves adjustment, simply click in the image with the On-image adjustment tool .

HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

Error 3194:
This device isn't eligible for the requested build
It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

Can't manipulate single anchor point - only move entire path

Neither using the direct selection tool nor holding command (I'm on OS X) while using the pen tool will allow me to move individual achor points, I am only able to move the entire path.
I can add and delete anchor points, but I am only able to control the handles on newly formed anchors, holding the space bar does not allow me to move new points either.
Is there a setting somehwere that I'm missing that will allow direct selection to work properly?
Thanks

Problem Solved.
Turned on Smart Guides (cmd-U) and that seems to have taken care of it.

HT1338 I suddenly can't access any links in Mail ( I use Safari as a browser)

I suddenly can't access any links in Mail ( I use Safari as a browser) any ideas please?

Try upgrading your operating system so that your Mac can run a newer browser.
Allan

Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces'

Hi all,
I know that I can delete anchor points but I was wondering if there is a shortcut to do it on a larger scale.
Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces' the image, only on the parts obviously that you cover with the new one.
Thank you all

Hi,
I'm using CS6, and I have a tree vector image, and I am trying to put names on top, but when I do this to keep it clean with no anchor points (as my other software cant read it with all the points in it) I have to manually delete each one but it deletes the whole path and I then end up with a tree, names on top, and a big gappy circle around the names.
So really, I wanted to add the names on top, and have that delete all anchors underneath .
Does this make sense? :S

How can I use existing anchor point as a new one?

Can anyone help?
I'm tracing over a drawing, and I'm trying to use an existing anchor point as an anchor point for another curve. So, from c, I want to click and drag on anchor point b to make a new curve. If I click where b is, then I just delete b. Can I make b my initial anchor point so that I can use it to complete my tooth? When I get to the next teeth Ill have to do the same thing. Has anyone any ideas?

> Each tooth should be a closed path.
Why?
> If I click where b is, then I just delete b.
Ugh, turn off Auto Add/Delete Anchor Point and watch your rage levels instantly decrease. You can then put your final point anywhere you want, including smack dab on top of B.

Can't see the anchor point or bezier handles when editing an effect

Please help! This may be an easy fix, but when editing an effect I can no longer see the anchor point, keyframes, or bezier handles on the timeline image. Specifically, I am keyframing the Brush Position in the Write-on effect, and while I can move the brush position, there is no visual cross-hair on the image nor bezier handles to adjust the curve... every adjustment is therefore a guess as to where the adjustment handle is.
Is there a button that toggles anchor point and keyframe path display? Obviously, not being able to see what you're working on is very frustrating. I tried to click the icon to the left of the Write-on effect bar (4-point square with the selection tool in the upper right), but nothing happens. The write-on effect bar is selected and the Brush Position is in keyframe mode.
Thank you in advance for your help.

I worked with this the other day. Bezier handles and the hot spots are tough to see and the write-on effect is a bit wierd for me. You may have more success placing keyframes at beginning and end of a clip as I had trouble keyframing only part of a clip and still controlling the writing effect. You can then slide the keyframes later to change the duration.
Also, you may want to disable all the other effects while editing this one, as the others keep getting selected instead for me and I end up e.g. moving the image instead of the brush.

Can I Move the Anchor Point for Adjustment Brush in ACR CS5

It's never been a problem before, but the anchor point for the Adjustment Brush in ACR is sitting exactly where I need to see what is happening. I can delete and start again, but if there is way to move or hide the anchor point while stil being able to adjust the setting, it would be handy to know for next time it happens.

R_Kelly wrote:
You can press the V key to toggle the pins on/off.
Exacty what I was after. Thanks.

Suddenly can't see any printers!!!

Help!!! I suddenly can't see either of my printers... a very old LaserWriter 5800, and also a Canon color printer. I'm posting this via my Airport network connection, so that obviously works. I'm also seeing one of two other computers on the network under Shared in the Finder window. The other two devices I'm seeing are the Canon printer's Fiery processor and the Airport base station. I upgraded to Leopard almost immediately, and this only happened today. Any ideas? Thanks very much in advance!!!
Message was edited by: Steve Mouzon

Updating the situation (still need help!!!)... I restarted everything network-related (cable modem, firewall, switch, and Airport) and now I can see both printers in the Default and AppleTalk windows of the Print & Fax system preference, but ONLY when I'm hardwired into the network. When accessing through Airport instead of ethernet cable, I can only see Bonjour shared printers on a colleague's machine? Any ideas?? Thanks very much in advance!

How can I reset the anchor point to its default?

One of the other guy using my machine screwed up the default anchor point position for text layers & for the life of us, we can't figure out how to reset it back to its default (centered on the text layer).
Right now, it appears a the bottom of the text layer (bottom left if left justified, bottom right if the text is right justified & bottom center if cerer justified).
Just to be clear, when typing out a brand new text layer, the anchor point does not appear in the center of the layer, as it normally does. Hitting "reset" in the tranform controls always moves the AP back to this position (ie, if I use the pan-behind tool to put the AP where it needs to be, then hit "reset", the AP moves back to the lower left corner of the layer)
I'm sure it's got to be some keystroke combination of some kind...
Anyway, does anyone know how to set it back to its default? It's a pretty big pain to have to manually set the anchor point for every text layer, and I kinda want to leave the "delete-your-prefs" option as a last resort...
thanks
D

As Rick said - there is no way in hell the text ever could have been perfectly centered to begin with. the behavior you are seeing is perfectly normal. Whenever you change the text, the anchor point will respond in kind. Only fixed size text blocks will reverse that principle and fit the content to the bounding box, leaving the anchor point unchanged.
Mylenium

How can I move the Anchor points of multiple layers to the same position within comp?

I have a comp of a butterfly that I want to copy the keyframes to many other butterfly comps, but to get the animation to work, I need all the anchorpoints of the individual layers to be at the exact same location within the comp (So the left wing, right wing, and body anchor points are right on top of each other)
How can I accomplish this quickly? I have a lt of comps to do...
Thanks all!

I would have set this up in Illustrator Before you started. Start with a rectangle that has either fill or stroke on a layer but the opacity is set to 0. The center of the rectangle will be the anchor point for that layer when you import as a comp maintaining layer size. Now create your left left side contents on the left side of the rectangle and repeat for the right side. Import as a comp and you'll be golden.
Here is a sample file and what the file looks like imported as a comp. Notice the x values of all anchor points are identical.
The artwork isn't great, it was created in less than a minute but it porves the workflow.

Can you change the anchor point of a swf in CP5.5?

I have created a small swf in Flash and have published it.
I've imported the swf into CP5.5 and applied an effect of anti clockwise rotate and assymetric zoom out in an effort to get it to spiral backwards into oblivion.
However, it seems to rotate the swf from the top left corner.
Is there a way to change this anchor point to the centre of the swf?
Regards

Col,
The anchor point of an object in Captivate is always the top left corner of the bounding box. No way to change it (have been pleading for that since long). Only exceptions are Rotate and motion effects, where the center is used.
Lilybiri

Suddenly, can't sync any songs from iTunes to iPhone, other help topics suggestions, not helping me :(

Everytime I try to sync any of my songs onto my iPhone 4, I get an error message that says: "Some of the items in the iTunes library, including "(song name)", were not copied to the iPhone "iPhone Name" because they could not be found." and then it stops syncing. It says there are 13 problems. Then when you expand to see the files, each one says: "(song name)"" was not copied to the iPhone "iPhone Name" because it could not be found." It can be any song, an old song from 7 years ago that I got off Limewire, or a song from a CD, or it can be a song I paid for from the iTunes store. Doesn't matter.
Couple weeks ago, I had no problems. Purchased new songs and had them in playlists on my phone. Then a couple days ago, I plugged my iPhone into the computer (to charge it), and suddenly my songs were removed off the iPhone. So I tried to put them back on, kept getting this error. So I googled it. I have spent the past 4 days TRYING to get things to work. I have looked through all the other similar questions, and tried suggestions on there. Nothing is working.
- There is no exclamation point beside any of my music.
- I have not changed the hard drives (I don't use my computer daily, probably once a week), (Windows is up to date also).
- I have tried re-adding the songs to the library.
- Everything still plays in iTunes.
- If I click on the file in its location, it will open it and play it in iTunes.
- I tried deauthorizing my account then reauthorizing it, didnt work.
- I have even removed all my music off my phone to see if that works, now I have 15 songs on it.
I did find it odd that when I looked in my purchased playlist, they were not there, but they are on the computer and on the purchased list (under the iTunes store on the side menu). At least I can use my iPod for when I'm in the car, but now I have to carry that around too, I'm getting quite frustrated. Normally I'm quite computer savvy, but I'm totally stuck on this one. And like most people, I rely on my iPhone WAY to much and let the little things affect my daily life. I hope SOMEONE can please help me?!?
(I don't know if it may even have to do with the fact that yesterday I finally got my iPhone updated to the latest IOS, (cuz I was finally able to download the update from iTunes... Unless that was a separate update) the one where it's like "do you want to cancel, download only, download and install").

After calling Apple Support. They kind of helped me. Since they pointed me in the right direction, I was able to fix the problem.
They were not actually songs, but ringtones I created in an app (and probably moved its location). Suddenly problem solved! Lol!

Suddenly can't merge any anchor points?

Similar Messages

Maybe you are looking for