Suddenly can't tab bullets

Hi Everyone,
Let me say up front, I am not a word processor guy. I know very little about them, but generally find Pages very easy to use. I've been working on a document using bullet points and indenting the bullet points using the tab key. Suddenly, about halfway down my third page, I can no longer tab the bullet points. Doesn't work on the next page either.
Any suggestions?
thanks,
travis

I know, I know. It's because I'm not really sure what questions to ask, so I was hoping I'd get a little prodding in the right direction, as you've done.
Basically, whenever I want to add bullet points, I go to the Text Inspector List Tab and select "Text Bullets". Then, after the bullet appears, I hit the tab key and it jumps over to where I want it (just a preset tab, I guess).
Thanks.
Message was edited by: trickmonkey

Similar Messages

Suddenly Can't Open PDFs. Starting about three days ago firefox will no longer open any PDFs. I get a blank page in a new tab.

Suddenly Can't Open PDFs in Firefox. Starting about three days ago firefox will no longer open any PDFs. I get a blank page in a new tab. Nice timing, with finals and everything where I need to view PDFs of practice tests.

Mozilla Firefox did not do their job, here. I am an editor and am constantly online. Now, I have to go to Safari to download PDFs. I reinstalled an earlier version of Firefox to get rid of the problem, but somehow Firefox has deactivated my PDF download feature. This is a total wreck and I am so angry I could spit. Stop launching new products until you have fully tested them. Customers are not your guinea pigs. Please fix this now- and fire a few idiots on the way- the ones who let this happen.

Suddenly can't login to Wifi on my iPad and have disconnected and restarted router and iPad to no avail. Help!

Suddenly can't login to Wifi on iPad and tried posted solutions with no success.

Thanks, trying to figure out what the ISP might have done is difficult......kind of like trying to operate blind folded with one hand tied behind our back.
We don't like to guess at things, or worse.....get into a series of "try this" and "try that" that only lead to more frustration, but have little choice if you want to try to continue with this. Your call on that.
On your MacBook Air......
Open Finder (the smiley face at the lower left of the screen on the dock)
Open Applications
Open Utilities
Open AirPort Utility
Click on the picture of the AirPort Extreme, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
What is the current setting that you see for Router Mode?
Is it "Off" (Bridge Mode)?
If yes, then change that setting to read DHCP and NAT
Click Update in the lower right corner of the screen, and allow a full minute for the AirPort Extreme to restart, then power it off
Power off the provider's modem/router
Wait a minute
Power up the provider's modem router and let it run a full minute
Then power up the AirPort Extreme and let it run a full minute
Check the network

Importing cd's and suddenly can't see the recently added folder, have been unable to figure out how to re-display it, know the songs are going somewhere

Was importing cd's and suddenly can't see recently added folder, been unable to figure out how to re-display it, know the songs are going somewhere

See Restore Original Smart Playlists.
tt2

1 of my HD partition suddenly can't mount and want me to initialize! HELP!!

Hi,
If anyone who frequented these kind of problems before please let me know your solutions solving these problems. Thanks very much!!
I'm a musician and a frequent mac user,I have a Power Mac G4 dual 800 with 1.25GMhz ram running on Mac Os 9.21 but with Mac OS X installed (I need to use Mac OS classic due to some of my music softwares still need to be updated before I upgrade to OS X),I've put the Hard Disk in 2 other sub partition HD at the beginning and have been using it to put all my important audio files and songs files. No problems at all before these nightmare started!
The serious problem I'm having now is I suddenly can't mount one of my partition HD anymore.
-I heard weird sound when starting & re-starting the Mac. (Heard some Hard Disk weird sound like sound "crutch" sound" and since the partition can't be mounted, the first thing shows up after I boot the computer is asking me if I wanna Initialize the Hard Disk because it's unreadable. There is 2 choices for me "Cancel" & "Initialize" But there is no effect when I choose "Cancel" so I use the Force Quit.
2 little message saying my Main Hard Disk & the other partition are damaged but they still showing up properly and still running dangerously I think.
-I have tried to start-up by using the installer Disk came with the computer and runs the First Aid Kit to verify the disk. I can see the partition and can see the icon of it but it's just different from others (in a black tone basic classic icon) and after running the verification some following messages appears:
"Mountcheck found serious errors" (in red) then "Overlapped extent allocation,2.60" (in red) and "Hard disk need to be repaired" so I run the Repair mode and it just can't fix because it says it's not been mounted.
I've also checked the main HD and the other partition which sometimes had some problems with it but no problems been found.
-There was few times my computer do Freeze or appears a Bomb asking me to restart when I recording something using the partition for saving the data and a weird sound of hard disk comes before freezing. It seems it's always the same place of the hard disk. Also When I inserted a blank CD-R disk into the drive it just freeze and appears a Bomb message instead asking me if I wanna use the Toast or i-tunes for preparing the disk which I always used to do.
I really hope the computer can hang on just for 1 more month before I have a break to fix everything and backup everything inside or initialize everything inside.
P.S. I've another Powerbook G4 running on OS Tiger but it's mainly for my internet use. ( I don't use internet connection for my PowerMac G4)
And the Combo super Drive is DOWN,I just can't insert any Disk inside anymore. So if having another Mac is helpful for my issue,anything I would try.
Due To I'm having some urgent important jobs now so I really can't initialize or setup other new computers for my works now.
HELP! Thanks!!!

Just because you can't find them does not mean they aren't there.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

HT201250 My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

Inherit a Backup
Inherit a Backup (2)

In creating a fillable PDF in XI Pro, can I insert a table which can be tabbed through?

In creating a fillable PDF in XI Pro, can I insert a table which can be tabbed through?

You're in luck. Create the first field and then right-click it (in Form Edit mode) and select Create Multiple Copies. You'll be able to specify how many copies of the fields to generate, and at what intervals. The nice thing is that although the properties of the new fields will be identical to the source one, they'll each have a unique name, so you'll get an instant "table" of fields.

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject. I was using a cord that went from larger square plug to larger square plug. So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

Thanks, Michael! I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed. Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk. Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait. :-)
Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed?
I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest? Two external hard drives? I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB. If this one is not reparable I could get two and do the same thing. I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

This is planned to be fixed in the next release.

Suddenly can't open .eps files in FW8

Hi all-
I suddenly can't open .eps files in FW8. Starts to open and then says "Internal error occurred" Text tool is also acting up. I think it may be related to one of the extensions I downloaded from the Adobe Exchange. Or, maybe it was something I did. Probably the latter. Either way, it seems like my FW8 has gotten corrupted. Ran spyware, adware, defrag, and virus scans. Even talked nice to my computer, but nothing has worked. I looked for patches or downloads on Adobe's site but there are none for FW8.
Anyway, I'm guessing my only option is to reinstall, unless someone out there has a better idea. If I do reinstall, does it erase everything? Meaning, will I lose all extensions and all the settings?
Thanks for your help!

Using Win XP Media center edition v 5.1 Service Pack 3. Been too afraid to upgrade to Vista. Probably about time to upgrade my FW.
I searched my entire machine for that file, both by file name and by all .txt files and could not find a "Preferences" file anywhere. Here's what came up under the FW directory path:
Thanks for your help, Heathrowe!
-Mike

I suddenly can not open pdf files. I have had Adobe Reader Xl and just ran into this problem

I have had adobe reader xl for some time and suddenly can not open a pdf file. I received an email yesterday with a pdf attachment which I can not open. What could be my problem?

Hi Pat, My operating system is Windows 7, Home Premium Service Pack 1. My email client (email Provider is Cox Communications - Cox.net).
Can not in my post means I tried to open a pdf attachment to a email. I received nothing happens. I do not get a blank screen or any messages. Nothing Nothing happens at all. I can click several times and get no response.
I did discover that by clicking on the Adobe Icon on my deskt topi get an Adobe box containing "Do you want to allow changes to your computer. I click Yes and get to my computer where I can find the above mentoned attachment which I think I had previously saved. I then get the attachment whick I can print. This may be printing from my hard drive - I am not sure. I think I could go through this procedure every time I want to open a atachment but it seems a long way around.
Any help you can give me would be appreciated. I have thought about removing Adobe and reinstalling. Maybe there is a corruption to my Adobe file.
Jim

Suddenly can't connect to windows server

I suddenly can't connect to the windows server. The username and password is correct, but it says "Connection Failed: Unknown user, incorrect password, or login is disabled. Please retype the name and password or contact the server's administrator." It pings the server as well. My internet and email works fine. The IT guys can't figure it out either, but they are not mac gurus. Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information. I also tried connecting through the server alias under the network and its the connetion failed as going through Connnect to Server and entering it as AFP://ipaddress.
Can it be from the 10.4.11 update? It was fine before the update I believe - but I can't recall for sure. I'm a lone mac user in a very pc company, so any mac expert advice would be helpful.
Is just strange since I have no problems connecting to our work email via GroupWise.

Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information.
Yes for any previous connection, Macs will send what's in Keychain Access, even if it's wrong, before you get asked... delete that reference in Keychain Access.

Suddenly can't connect to music store

i suddenly can't connect to the music store. When I try to connect to the music store I get:
iTunes could not connect to the Music Store. The network connection was reset. Make sure your network connectionis active and try again.
I also haven't been able to connect to ichat. My internet is working. I can view websites and everything. I don't know what's going on or why. It's been going on for a couple days. I'd be grateful for any help!

working!

TS3103 All of a sudden can't receive email on Mail client. Sessions with service provider (Att/yahoo) and Apple have yielded no results!

All of a sudden can't receive email on Mail client. Sessions with service provider (att/yahoo) and Apple have yielded no results! Recently upgraded to Lion, but have received email since. Anyone having the same problem. Apple says service provider problem, service provider say it's the mail client. Anyone had this problem???

No. My frustration with the problem just led me to begin the process convert all my email to a gmail client. However, after some time all my mail with att/yahoo has been coming through as before. Go figure. Still will convert to gmail.

Suddenly can't edit in LR4 -- can DNG files get locked?

I suddenly can't edit in "Develop" mode. I can click on Lens Correction, but I can't seem to use the Basic adustments, Detail, or any others. It's like I locked the DNG file from any more editing. Any ideas?*

Hi Ron,
Can you open the basic panel?
...just a weird idea... maybe you have set your develop panels to solo mode? So only one will be open at a time? <ctrl>1 should help, as this opens the basic panel.
To answer your general question: it is not the DNG files that get locked - they are *locked* all the time.
LR writes a record pointing to a DNG inside its catalog=database.
That can not get locked.
What exactly do you see when trying to do a basic adjustment?
Could it be a performance problem - LR just being too slow for you to notice anything?
What system are you using, which LR-version exactly?
Cornelia

Suddenly can't tab bullets

Similar Messages

Maybe you are looking for