Suddenly Cannot Connect Remotely

Hi there,
I went away for a few days and decided to unplug my Time Capsule while I was gone..I realize now that this wasn't the best idea.
I used to be able to connect remotely without problems and I've had no problems whatsoever until now.
When I try to "Connect to Server" now, I get "The Finder cannot complete the operation because some data in afp://XX.XXX.XXX.XX could not be read or written. (Error Code -36)".
Can someone please tell me whats going on and why I suddenly cannot connect remotely?
Thank you,
Josh

I just began experiencing the same thing. I hope someone can help with an answer!

Similar Messages

I suddenly cannot connect to any wifi with my ipad 1. In settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal.

I suddenly cannot connect to any wifi with my ipad 1. in settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal. I have reset the Wifi under General. But when I type in my password it still says, "Unable to join the network."

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Cannot connect remotely, setup is correct but did not try port mapping, i don,t know how please help

could someone please point me to the possible areas on my server where i can check why i cannot connect remotely. I have been trying for the past two months without success. i did not tru port mapping cause I don;t know how to do this and I was told that port mapping on my time machine is done automatically. I am running a mac mini lio server 10.7.3 Time capsule.

Most people are going to see that message as a result of not properly closing Firefox, and then attempting to reopen Firefox. This problem is most likely to occur on Windows Operating systems, less frequently on Linux and Mac systems but not unheard of on any system.
Because you are on a Mac, I am referring you directly to an article that has been reworded for each operating system.
: http://kb.mozillazine.org/Kill_application
To properly close Firefox on your Mac use "Firefox" button -> Quit Firefox, and not with the "X" in corner of window which simply closes the window and not necessarily Firefox.
When you get stuck as you have described you must Force Firefox to terminate as described at the end of the article:
Mac OS X
:Open Apple Menu and select "Force Quit". For Mac OS X 10.3 and later, you can also use the Activity Monitor found in your "Utilities" folder (Applications -> Utilities -> Activity Monitor).
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Macbook suddenly cannot connect to WiFi

Hi guys,
All of a sudden, overnight, my Macbook Pro cannot connect to our home wifi network. I have tried every trick in the book, rebooting, changing "locations," changing the password of the router, moving around the priority of the difference connections, but whatever I do I get the same error message when I try logging in:connection timed out.
Until now it has functioned perfectly since we moved in here a month ago, and I have no explanation for what happened. At one point it looked like the problem was related to the ip-address as it could connect to the wifi but not get an ip-address, but now I cannot even replicate that!
Another issue I am considering is whether it could be disturbance from another wifi network (there is like 15 of them active in our building) Could that explain it?
Thanks!

try removing the security from your router, and connecting to the unsecured network.
If that fails, try to connect to another location, and see if you can connect to someone elses network.
Next connect the computer directly to the modem and see if that works.

Cannot Connect Remotely to WMI

I have run into an issue with our Windows 7 machines and am having trouble diagnosing the cause. I am unable to connect remotely to any of the Windows 7 machines' WMI. Every time I try, I get the error "RDP server is unavailable". I can ping the
workstations and connect to the C:\ drive. I can use the Remote Tools capability from within SCCM. I have gone through the DCOM security settings, ensured the Remote Procedure Call, Remote Procedure Call Locator, WMI, WMI Performance Adapter, TCPIP/IP NetBIOS
Helper, Server and Workstation services are all running. I even disabled the AV on the client. Remote tests using SCCM Right-Click Tools, wbemtest and WMI Tools have all failed with the same error. I have also tried using the same tools by IP address and FQDN.
I have no issues with XP machines on the same network/subnet. Where else can I fish? Thanks for your time.
Eric

Hi,
I have been able to find this blogs:
Let’s troubleshoot WMI (Part 1: Remoting and Security)
For the RPC server is unavailable error when connecting with WMI, it means the Machine does not exist or The Machine cannot respond because the appropriate firewall exceptions have not been made.
Please take a check with that the File and Printer Sharing is enabled on the Windows Firewall Exceptions list for the following ports:
135 (RPC)
445 (TCP)
103x (mostly 1037)
441 (RPC)
Please take a try to modify this policy if the above didn't work:
enable : Allow remote administration exception, or use Netsh command:
Help: Enable or disable the remote administration exception
Reference here:
WMI Troubleshooting Guide
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Cannot connect remotely to Database

Dears,,
I can connect to database as following:
sqlplus sys/pass as sysdba
But when trying to connect remotely as following:
sqlplus sys/pass@vis as sysdba ( It gave me error )
[oravis@ebsibm dbs]$ sqlplus sys/pass@vis as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Sat Apr 25 09:34:24 2009
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-01031: insufficient privileges
Enter user-name:
_[oravis@ebsibm VIS_ebsibm]$ tnsping vis_
TNS Ping Utility for Linux: Version 10.2.0.3.0 - Production on 25-APR-2009 10:15:25
Copyright (c) 1997, 2006, Oracle. All rights reserved.
Used parameter files:
_/oracle/VIS/db/tech_st/10.2.0/network/admin/VIS_ebsibm/sqlnet_ifile.ora_
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=ebsibm.othaim.corp.net)(PORT=1521)) (CONNECTDATA= (SERVICE_NAME=VIS) (INSTANCE_NAME=VIS)))_
OK (10 msec)
Note: I already created the password file
[oravis@ebsibm dbs]$ orapwd file=/oracle/VIS/db/tech_st/10.2.0/dbs/orapwvis password=pass entries=10
However, no records in v$pwfile_users:
SQL> select *
2 from v$pwfile_users;
no rows selected
Please, need your help ASAP
Edited by: user4520487 on Apr 24, 2009 11:49 PM

Dear,,
db listener cannot be started.
see the following please ( May be there are errors in these files )
tnsnames.ora
# This file is automatically generated by AutoConfig. It will be read and
# overwritten. If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
#$Header: NetServiceHandler.java 120.16.12000000.3 2007/09/14 10:00:07 schagant ship $
EBS=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=EBS)
(INSTANCE_NAME=EBS)
IFILE=/oracle/EBS/db/tech_st/10.2.0/network/admin/EBS_localhost/EBS_localhost_ifile.ora
listener.ora
# $Header: ad8ilsnr.ora 120.1 2006/06/07 05:52:02 sbandla noship $
# This file is automatically generated by AutoConfig. It will be read and
# overwritten. If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
# Net8 definition for Database listener
EBS=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=EBS)(INSTANCE_NAME=EBS))
#STARTUP_WAIT_TIME_EBS = 0
#CONNECT_TIMEOUT_EBS = 10
#TRACE_LEVEL_EBS = OFF
#LOG_DIRECTORY_EBS = /oracle/EBS/db/tech_st/10.2.0/network/admin
#LOG_FILE_EBS = EBS
#TRACE_DIRECTORY_EBS = /oracle/EBS/db/tech_st/10.2.0/network/admin
#TRACE_FILE_EBS = EBS
#ADMIN_RESTRICTIONS_EBS = OFF
#SUBSCRIBE_FOR_NODE_DOWN_EVENT_EBS = OFF
IFILE=/oracle/EBS/db/tech_st/10.2.0/network/admin/EBS_localhost/listener.ora
Sqlnet.ora
# This file is automatically generated by AutoConfig. It will be read and
# overwritten. If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
#$Header: NetServiceHandler.java 120.16.12000000.3 2007/09/14 10:00:07 schagant ship $
NAMES.DIRECTORY_PATH=(TNSNAMES, ONAMES, HOSTNAME)
SQLNET.EXPIRE_TIME= 10
SQLNET.AUTHENTICATION_SERVICES=(NTS)
IFILE=/oracle/EBS/db/tech_st/10.2.0/network/admin/EBS_localhost/sqlnet.ora

I suddenly cannot connect to Facebook. What has happened?

Suddenly I cannot connect to Facebook. What has happened and what can I do about it?

Make sure your OS X software is up to date.
Click the Apple  top left in your screen.
From the drop down menu click: Software Update

Apple TV all of a sudden cannot connect to Wifi

My apple tv just stopped being able to connect to my wifi. It locates it and all of my other devices, both apple and PC are connected to the Wifi and streaming without a problem. I've restarted and tried to restore, troubleshoot, disconnect, try another wifi....etc. i see a lot of similar issues on the discussion boards but no responses from someone that has a resolution. I am in Buenos Aires and have been for over a month...it has worked fine up until today. There are no apple dealers in BA so i'm out of luck if i can't get this to work.
it all started with my apple tv not being able to set the date and time....i'm assuming because it couldn't connect to the wifi. I don't have an option to connect via ethernet either as it's a community router in the building.
Any possible reason for this...resolutions?
Thanks for everyone's help

Mine just started doing exactly the same. I'm in Tokyo and the house is wired for technology: thr router, airports, computers, ipads, iphones are all working absolutely fine. One minute I was watching Dexter the next asks for my password for network right out of the blue. Then says "Cannot connect to network" and gives and error -6, whatever the devil that is.
Really annoying..nothing else wrong with my network as I say, and I haven't updated any firmware in airport etc to disturb what was a perfect status quo. Really really annoying....wish I could do something other than share your pain Bitta Panda....but I've tried resetting everything as well - apple tv included.

Suddenly cannot connect to Internet

I am suddenly not able to connect to the Internet. I had not changed any settings. However, I did have some monitor freezing and garbled images on the monitor, for which I had to shut down and restart the computer a couple of times.
I have ATT Uverse (no help from their support); my computer is connected directly via ethernet to a PlugLink 9650 Ethernet Adapter and to a Netopia Router. I no longer can share computers on my LAN.
If anyone can glean some insight from the following diagnostics below, I would really appreciate some suggestions as to how to resolve this. I am planning to have a Uverse person visit my home to verify if it is a problem caused by Uverse or is something Mac related.
Thanks for any help or suggestions,
Shelley
Network Diagnostics status:
Using Automatic Location:
Ethernet 1 is Green OK
Ethernet 2 was Yellow and said No IP Address (This is the one plugged into the Netopia). I looked up the current IP address from http://http://checkip.dyndns.org/ , entered it and now it is Green OK
Network Settings are Green OK
ISP is Green OK
Internet is either Yellow and when I go to a browser, it says "resolving host" but doesn't connect.
Server is either Yellow
Here is the Etresoft diagnostics:
Hardware Information:
    Mac Pro - model: MacPro3,1
    2 2.8 GHz Quad-Core Intel Xeon CPUs: 8 cores
    18 GB RAM
Video Information:
    ATI Radeon HD 2600 - VRAM: 256 MB
Startup Items:
    HP IO - Path: /Library/StartupItems/HP IO
    MySQLCOM - Path: /Library/StartupItems/MySQLCOM
System Software:
    Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:18:23
Disk Information:
    WDC WD3200AAJS-41VWA1 disk0 : (298.09 GB)
        (null) (disk0s1) <not mounted>: 200 MB
        Macintosh HD (disk0s2) /: 297.77 GB (102.04 GB free)
USB Information:
    FANTOM   WD10EAVS-00D7B1 931.51 GB
        (null) (disk1s1) <not mounted>: 200 MB
        Time Machine Backups (disk1s2) /Volumes/Time Machine Backups: 856.07 GB (474.26 GB free)
        Macintosh_HD_CLONE (disk1s3) /Volumes/Macintosh_HD_CLONE: 75 GB (8 GB free)
    Apple, Inc. Keyboard Hub
        Microsoft Microsoft Wireless Optical Mouse¬Æ 1.00
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. Apple Cinema HD Display
    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
    [not loaded]    org.samba.winbindd.plist
Problem System Launch Agents:
    [failed]    com.apple.Kerberos.renew.plist
Launch Daemons:
    [loaded]    com.adobe.fpsaud.plist
    [loaded]    com.adobe.SwitchBoard.plist
    [loaded]    com.adobe.versioncueCS4.plist
    [loaded]    com.autodesk.backburner_manager.plist
    [loaded]    com.autodesk.backburner_server.plist
    [loaded]    com.autodesk.backburner_start.plist
    [loaded]    com.barebones.bbedit.plist
    [loaded]    com.google.keystone.daemon.plist
    [not loaded]    com.mysql.mysqld.plist
Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist
    [loaded]    com.adobe.CS4ServiceManager.plist
    [loaded]    com.adobe.CS5ServiceManager.plist
    [loaded]    com.google.keystone.agent.plist
    [loaded]    com.hp.help.tocgenerator.plist
User Launch Agents:
    [loaded]    com.adobe.AAM.Updater-1.0.plist
    [loaded]    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    [loaded]    com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
    [loaded]    com.akamai.client.plist
    [loaded]    com.akamai.single-user-client.plist
User Login Items:
    GrowlMenu
    iTunesHelper
    AdobeResourceSynchronizer
    MagicMenu
    TransmitMenu
    ExpanderDaemon
    MagicMenu
    StuffIt Destinations
    Google Drive
    AdobeResourceSynchronizer
    SPanel
    HP Scheduler
3rd Party Preference Panes:
    Adobe Version Cue CS4
    Akamai NetSession Preferences
    Citrix online plug-in
    Flash Player
    Flip4Mac WMV
    Growl
    MacFUSE
Internet Plug-ins:
    AdobePDFViewer.plugin
    AdobePDFViewerNPAPI.plugin
    CitrixICAClientPlugIn.plugin
    DirectorShockwave.plugin
    Flash Player.plugin
    FlashPlayer-10.6.plugin
    Flip4Mac WMV Plugin.plugin
    Google Earth Web Plug-in.plugin
    iPhotoPhotocast.plugin
    JavaAppletPlugin.plugin
    McpPlugIn.plugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    Silverlight.plugin
User Internet Plug-ins:
    WBETools11.plugin
Bad Fonts:
    None
Top Processes by CPU:
         4%    EtreCheck
         4%    syslogd
         1%    fontd
         1%    WindowServer
         0%    SystemUIServer
         0%    SPanel
         0%    Finder
         0%    blued
Top Processes by Memory:
    55 MB        WindowServer
    55 MB        Google Drive
    37 MB        Dock
    37 MB        Finder
    37 MB        mds
    18 MB        TransmitMenu
    18 MB        coreservicesd
    18 MB        SystemUIServer
    18 MB        loginwindow
    18 MB        netsession_mac
Virtual Memory Statistics
    16.62 GB     Free RAM
    467 MB       Active RAM
    237 MB       Inactive RAM
    702 MB       Wired RAM
    198 MB       Page-ins
    0 B          Page-outs

Packets bound for the Internet from your Mac will go over the topmost working interface shown in
System preferences > Network
So you need to decide what path they will be taking, and get that path working.
Your Netopia Router already knows its own Internet-reachable name, or it cannot possibly talk on the Internet, and cannot get you to that lookup site. Every Router also uses a "private" IP Address to talk on your local Network. Those addresses will be from one of the three ranges that are not reachable from the Internet:
IP address range
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
The Router generally takes the lowest address in one of those ranges (e.g., 192.168.0.1), and then assigns the addresses for other devices using DHCP (e.g., 192.168.0.2, then .03, then 0.4, and so on.)

Cannot Connect Remote

Hey, I'm trying to connect my iPod Touch (1st Gen) to my PC.
I have the iPod connected to the WLAN network, and the PC is connected to the network with an ethernet cable. Both connect directly to the same router.
However Ive been fiddling with my firewall, router, iTunes and iPod for a while and still can't get it to see eachother.
How can I get them to both connect?
I had them able to connect before but the PC was connected with a wireless USB adapter.

I do this exact thing. You have to open the firewall port on your computer for iTunes music sharing, That will allow communication between the iTunes and the remote. I don't know if windows logs firewall denies as verbosely as mac does but look for repeated attempts from a 192. or whatever your network has on a high port number three thousand something, I cannot remember it right now, sorry.

Suddenly cannot connect to server "you do not have permission to access the server"

I am one of only two Macs in our office.
Up until now I have been able to connect to our shared folders/server just fine. Occasionally and randomly I would seem to get booted off, but would just log back in.
Now suddenly I get "Connection Failed You do not have permission to access this server".
I seem to get it whether its cifs, afp or smb.
After it denies the connection it also boots me from email. As soon as I cancel the attempt to connect the email recognizes my password again.
I have tried rebooting, repairing permissions and having our network admin change my password and nothing seems to work.
If I enter an incorrect pw it recognizes it as such. I only get the above message when I use the correct username and PW.
Additionally if I go to the other mac in our office I am able to connect using the same credentials without any problem.
This is via ethernet.

i also got the same problem on my ipad i have tried every thing i dont knw hw to fix this problme any solution. ???????????????????????????????????????????????????

Cannot connect Remotely for SQL Server 2008

Hi,
I have SQL Server 2008 installed and configured as server locally. So when I try to connect using same machine with IP address it works but when I try to connect through any other computer through internet, it does not work and gives the following error.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named pipes provider, error: 40 could not open a connection to sql server) (Microsoft SQL Server,
Error: 53 )
please note that:
- I have amended Internet Protocol version 4 (TCP/IPv4) properties with my current IP address, subnet mask, default gateway and all Sky(ISP) preferred/alternate DNS Server names.
- SQL server configuration manager shows that TCP/IP is enabled and it is on 1433 port.
- SQL, SQL Browser exe and SQL server windows NT is ON for firewall's Port, Domain and public.
- Router is added with outbound services and Inbound services for SQL port 1433 and SQL browser 1434.
- SQL server instance is enabled for remote connections.
Kindly help, I am almost there and do not want to give up. Thanks in advance.
Adnan

Hello Adnan,
See TechNet
Connecting to SQL Server over the Internet for how to setup your enviroment to Access your SQL Server over public Internet
Olaf Helper
[ Blog] [ Xing] [ MVP]

Cannot connect remote database

hi,
i have my database on aix(oracle 10g rac) but i cannot access other database from my aix machine . i have entry of other database into my tns file.
when i trying to connect
username@sid
i get tns problem.wt to do ?
thxs

ORA-12154:     TNS:could not resolve the connect identifier specified
Cause:     A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
Action:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.
If any of these is not working for you,post here your tnsname, listener and sqlnet.ora files.
Aman....

No IP address...suddenly cannot connect to my home wireless network

My wireless network had been working PERFECTLY from the moment i got my iBook...but its been about a month now that its just not working. And i've looked online, called for support...and i can't figure out what the heck it wrong.
I have a Westell VersaLink Gateway modem/router...and the AirPort card in my iBook G4 worked perfectly since i brought my iBook home from the store. But starting about a month ago...it started giving me some trouble. I was surfing the web when all the sudden, i couldn't visit anymore web pages...and according the the wireless thingy in the task bar, i have a 100% strong connection to the wireless settings. And after trying to figure out whats wrong. i found out that my iBook isn't getting the rightIP addres...
I tried so many things (restarting my router...many times, deleting my system prefs, manually typing in the IP address, etc.) but nothing worked. and i'm starting to get real frustrated with having to be connected via ethernet cable into my router.
So i can connect to my router via ethernet cable...but not wireless...does anyone know what i could do?
iBook G4 Mac OS X (10.4.6)

My computer is doing the same thing! My hard drive crashed a week ago--it worked before the new hard drive, but no longer. I can get on other wireless networks--at the Apple store, my coffeehouse, my friend's house--but no longer at home. At home, it shows full bars and says I'm connected, but I can't actually navigate anywhere on the web. My connection is through a Linksys router, using SBC/Yahoo DSL.
Any new ideas that might account for this?

PAPI cannot connect remote Engine

Hi, all,
I have a OBPM 10gR3 engine deployed in remote server with Sun IPLANET Directory Service.
I try to connect the engine by using PAPI, but error report:
Exception in thread "Main Thread" fuego.configuration.ConfigurationRuntimeException: No factory registered for this configuration.
Detail:There is no factory registered to handle [IPLANET] for the type [JNDI].
     at fuego.configuration.ConfigurationRuntimeException.subTypeNotRegistered(ConfigurationRuntimeException.java:129)
     at fuego.configuration.ConfigurationLoader.addConfig(ConfigurationLoader.java:159)
     at fuego.configuration.ConfigurationLoader.endElement(ConfigurationLoader.java:69)
     at fuego.directory.DirectoryConfigurationLoader.endElement(DirectoryConfigurationLoader.java:57)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser.java:601)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XMLDocumentFragmentScannerImpl.java:1772)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2923)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:647)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:508)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
     at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
     at fuego.configuration.ConfigurationLoader.parse(ConfigurationLoader.java:119)
     at fuego.directory.DefaultDirectoryConfiguration.create(DefaultDirectoryConfiguration.java:52)
     at fuego.directory.DirectoryConfigurationResource.load(DirectoryConfigurationResource.java:81)
     at fuego.directory.DirectoryConfigurationManager.loadDirectoryConfiguration(DirectoryConfigurationManager.java:392)
     at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:331)
     at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
     at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
     at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
     at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
     at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
     at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
     at fuego.papi.ProcessService.create(ProcessService.java:335)
     at com.obpmpapiclient.PapiExample.main(PapiExample.java:29)
I checked the directory.xml, and found config:
          <configuration name="organization" type="JNDI" subtype="IPLANET">
               <property name="java.naming.factory.initial" value="com.sun.jndi.ldap.LdapCtxFactory"/>
               <property name="jdbc.pool.idle_timeout" value="5"/>
               <property name="jdbc.pool.entry.max" value="10"/>
               <property name="java.naming.referral" value="follow"/>
               <property name="java.naming.security.principal" value="uid=bpmadmin,dc=oracle,dc=com"/>
               <property name="jdbc.pool.min" value="0"/>
               <property name="custom.com.sun.jndi.ldap.connect.pool" value="true"/>
               <property name="java.naming.provider.url" value="ldap://ozone.oracle.com:37102/dc=oracle,dc=com"/>
               <property name="jdbc.pool.max" value="10"/>
               <property name="java.naming.security.credentials" value="<encrypted>XIX/CNqaHWA="/>
          </configuration>
It seems that No factory registered for IPLANET. How to deal with it? Thanks in advanced.
Best Regards,
Bill

Hi,
I was having the same issue here. I found a workaround solution since I was in a hurry: add ALL .jar found in you ENTERPRISE_HOME/webapps/workspace/WEB-INF/lib directory.
It seems it's just a matter of depency. Since I had no time to look for the exactly .jars needed, I add it all.
Hope it helps.
Regards,
Alexandre Jacques

Suddenly Cannot Connect Remotely

Similar Messages

Maybe you are looking for