Suddenly Cannot send e-mail through g-mail account

I have had no problems with sending/receiving mail until suddenly 4 days ago - can receive, but cannot send e-mail through a g-mail account. Do not know how to rectify, nor whom to reach out to...
Any help would be greatly appreciated.

Hello PBriestner,
Thank you for using Apple Support Communities.
The following article should be useful to you in troubleshooting email on your computer:
OS X Mail: Troubleshooting sending and receiving email messages
Regards,
Jeff D.

Similar Messages

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account. Can anyone help with a solution?

You haven't set up the SMTP (outgoing) mail server correctly. You probably didn't enter your user ID and password for the outgoing server. They are needed even though it says "optional".

I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?

I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?

I have starter 3.0 and cannot share pictures via outlook express. Evidently that version is discontinued and my outlook express does not support the MAPI that is required. I think the only solution is to upgrade to photoshop
elements or to send photos as attachment to your e-mail. I have the same problem using Zoom Browser EX sending photos via internet. I spent a whole day trying to resove this issue and have exhausted all options. Just like "Instant share" in HP image Zone that was replace by photoshop album starter 3.0 and now it is out dated.

Cannot send email with any of my accounts on Mail 5.2

I have a Mac Book Pro
Mac Os X 10.7.4
Mail 5.2
I have many diferent email accounts (gmail, hotmail, prodigy.net.mx, etc)
Some are POP, some are IMAP
I have another computer, an iMac with older system and older Mail app. and used same setup for all accounts
I can receive emails, but I cannot send emails on any of the accounts. I have quadruple checked all settings and all seems to be ok.
All smtp connections appear as not connected, yet different servers, or email suppliers, this makes me suspect something else is wrong.
Any ideas? Help would be appreciated.

Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app. I could get emails into the account with no problem but couldn't send. I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success. Then last night, it just so happened that my broadband provider had to change out my wireless modem. As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work. So I think people need to look at their router settings for the a solution to the problem.

How can I send purchase order through SAP mail ?

How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?

just do it as <b>Anji reddy</b> said to you   ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the   the belwo program is for sending <b>the Spool   Request data   as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF                                                 *
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*& Execution                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
*        to sap-spool
*        spool parameters   %_print
*        archive parameters %_print
*        without spool dynpro
*        and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
*       FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
*       FORM get_job_details                                          *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
*       FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
*       FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
*       FORM send_email                                               *
* --> p_email                                                       *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
*       FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
*       Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish

Hi - I cannot upload my emails through the mail icon. The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email. I use hotmail, and have had no problems with my iPhone or iPad.

Hi - I cannot upload my emails through the mail icon. The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email. I use hotmail, and have had no problems with my iPhone or iPad. So the only way I can check my emails on my mac is to go through the internet. Can anyone help?

Hello, do you mean Download?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.

Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Masking my pop mail through iCloud mail

I use pop mail from godaddy. So mails across my apple device is not synced. Is there a way to route my mails through iCloud mails so that all incoming mails come to my iCloud mailbox and all receivers of my outgoing mail sees my actual mail I'd even though oak sending it through my iCloud mail. Ian trying to find out an alternative to the expensive imap mail option from godaddy.

Who is the POP mail provider? When you removed the account, did you verify that you entered the username and password in all of the locations, even where it said optional? When you see the error, is this for receiving mail, sending mail, or both?

I can't send outgoing messages through my gmail account when when switched to iCloud they send

i can't send outgoing messages through my gmail account when when switched to iCloud they send

Greetings vermjenna,
Welcome to the Apple Support Communities!
I understand that you are unable to send email from your Gmail account on your Mac. To troubleshoot this issue, I would recommend reading over and working through the suggested troubleshooting steps located in the attached article.
If you can’t send or receive email on your Mac - Apple Support
Cheers,
Joe

Suddenly cannot send Mail

I'm in a tech support loop. Qwest is my ISP, Emerald Webhost is my domain host. My outgoing SMTP server is mail.mydomain.com (at Emerald). Suddenly, a few days ago, I can no longer send mail via Apple Mail from my DSL connection. These two laptops can send using mydomain.com from other connection points (cafe's). The ISP and Webhost tech supporters cannot find any problems, so I turn to this forum.
Internet connection is fine - browsers all work as always.
Incoming mail works as always.
Outgoing mail at my DSL connection returns the "cannot connect on server mail.mydomain.com . . ."
Get Mail before hitting the send button does not help.
Hard reset and reconfigure of the Qwest 2Wire modem did not help.
Same problem on wireless and ethernet at this DSL connection.
I'm using ports 110 and 26, as always.
Both Macs on this DSL connection developed the problem at the same time.
None of the modem or Network or Mail prefs/settings were changed on the Macs.
The laptops send just fine via the mydomain at other connection points (cafe's, libraries).
Reentering passwords in Mail Prefs and at mydomain did not help.
Any ideas?
Thanks
-B

Many ISPs are refusing to pass mail to SMTP servers other than their own - when I am at our place in Laguna Beach I have to use the COX cable SMTP server for all of my outgoing mail - they will not let me connect to any of my POP account SMTP servers - have you tried using the Qwest SMTP server? that may be the answer
Since two Macs started having this problem at the same time that makes it look like a change on Qwest's part
LN

Suddenly cannot send or receive mail

mail was working fine earlier in the day. updated to 10.4.10 the day prior. I had changed nothing with the mail preferences. but i am wondering if the problem has something to do with the update. I use cable internet that does not support mac mail!
g3 pismo powerbook Mac OS X (10.4.10)

It shouldn’t matter whether your ISP supports Macs or not. They should still be able to tell you what the right account settings are supposed to be, or whether they’ve made any changes that would explain why Mail suddenly cannot connect to the mail server now...
Open /Applications/Utilities/Keychain Access, choose Keychain First Aid from the application menu, and proceed to repair the keychain. If that doesn’t work, you may try removing the password entry from the keychain and letting Mail create it again the next time it asks for it.
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
Try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible (i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc.), or shutting down both the computer and the router/modem used to connect to Internet, restarting, and see whether that makes a difference.

Mail v. 2.1.3 receives but suddenly cannot send

After functioning virtually error free I'm suddenly faced with this issue. I've at least knowingly changed nothing and this issue seems to be only applicable to the MacBook running 10.4.3; iMac, iPad, iPod, and phone continue to work fine. I'm stumped--any ideas?

Hi Dennis, is this a .mac or MobileMe account?
I think they're slowly nudging people to switch, .mac & MobileMe are going away about July, may as well set it up now.
I understand .mac mail will still come through.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
IMAP (Incoming Mail Server) information:
▪ Server name: imap.mail.me.com
▪ SSL Required: Yes
▪ Port: 993
▪ Username: [email protected] (use your @me.com address from your iCloud account)
▪ Password: Your iCloud password
SMTP (outgoing mail server) information:
▪ Server name: smtp.mail.me.com
▪ SSL Required: Yes
▪ Port: 587
▪ SMTP Authentication Required: Yes
▪ Username: [email protected] (use your @me.com address from your iCloud account)
▪ Password: Your iCloud password

TS3276 Why can i suddenly not send out mail using mail through my ntlworld account

Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

TS3276 i suddenly cannot send any mail via my imac please help

i am unable to send any mail using apple mail. i have checked the all the settings and it seems to be correct. please help

Here's a troubleshooting article from Apple: iOS: Troubleshooting Mail
It doesn't seem to cover your specific issue, but have you tried using a different network (either a different wi-fi network, or switching from wi-fi to cellular or vice-versa if you have a wi-fi+cellular iPad)?
For GMail, iCloud and Yahoo, copies of messages are stored on their respective servers, so you could try deleting the account on your iPad, then re-adding each account one at a time to see if that resolves the issue.

PO send to vendor through e-mail

Hi All,
while sending the PO to vendor through e mail, some POs sent to vendor. but some are not. I have seen the in the vendor master address screen the e mail is correct.
And i have seen the messages in PO , the medium 5 (external send) is also maintained for the all POs which is sent and not sent.
So please guide in this in which part the error will be possible
Thanks in advance
with regards
Allen

Follow this
Basically there are two mail types: Internet mail (external mail) and SAPOffice mail.
Mail is sent via the output determination in both cases.
If you use the external mail, the message for the purchasing document is converted into a corresponding text file which is sent to the vendor via the Internet.
SAPOffice mail is sent only within the R/3 System and has mainly the function of providing information.
In particular, it is not possible to attach a message (form) for a purchasing document to a SAPOffice mail.
When using external mail, the following basic settings are required:
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
o Note that it is not possible to change the e-mail address of the vendor
o You can use a temporary email address in Transaction ME21N.
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail.
You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define
Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example,Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been
carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
To use the SAPOffice mail, the following basic settings are required:
1. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail.
You can branch to the maintenance of the communication strategy via the input help.
2. Use the SAP standard environment (program "RSNASTSO" and FORM routine "SAPOFFICE_AUFRUF") as the processing routines.
3. In the condition records for the output type (for example,Transaction MN04), use medium '7' (SAPOffice) and also partner role 'MP' (mail partner).
Additional settings:
Problem:
How can you both change the mail title and text for the sending of a mail message and maintain a replacement parameter, for example a document number.
Solution:
1. The replacement routine is maintained in the Customizing for the output type in the detail screen on the 'General data' tab under 'Replacement of text symbols' (for Release < 4.6B, this can be found on the 'Mail' tab page).
Program: SAPMM06E
FORM routine: TEXT_SYMBOL_REPLACE
2. Maintain mail title and text.
o If you want to send a purchase order within an R/3 system using the SAP office, you can maintain both the mail title ('Re:') and also a mail text in the Customizing for the output type To do this, select the directory mail title and text for the corresponding message type.
o If you want to send a purchase order as (external) mail, for example, to a vendor, you have to maintain the mail title in the condition record for the output type (for example in Transaction MN05) on the 'Communication method' tab page. Enter the mail title in the 'Text for cover page' field. You cannot maintain an additional mail text.
o Note that the values from the mail title are used to create the description for the attachment.
3. The replacement parameters must be enclosed by &. Example: You want to enter the title 'PO number '. For this you have to enter the following in the Document Title field (Message Customizing ->
sub-option: Mail title and texts) 'PO number &EKKO-EBELN&'

Suddenly Cannot send e-mail through g-mail account

Similar Messages

Maybe you are looking for