Suddenly " display does not support HDCP " - March 2014

Hello Sky peoples Having had no trouble with my Sky+ HD and my LG TV for months and months I am now getting this "does not support HDCP" dialog every time I switch on. The TV was on then suddenly it blacked out and wouldnt restart - so I had to de-power at the socket. After restart, this error dialog always appears - and no HDMI signal I have tried all the remedial actions, power-down restarts, cable switchovers, updated box software, unplug/replug The display still works fine on bluray and xbox 360The sky box is still putting out a signal on composite video. yinch'14

Hi there Yinchy,
Thank you very much for joining us on the community forum and posting your query.
I am extremely sorry to see that you are experiencing this issue.
There are a number of things that you can do to try to resolve this.
Firstly, Reset the HDMI signal.
Using the Sky remote:
1) Press Standby on the Sky remote. Standby light displays.
2) Switch off the power supply or remove the plug at the mains socket.
3) Switch connection equipment to standby and disconnect at the mains socket.
4) Confirm no lights remain on the Sky box or any connected equipment.
5) Wait 60 seconds, then switch the TV on at mains socket.
6) Switch the TV to the correct HDMI or DVI input.
7) Switch the Sky box on at the mains socket.
8) Wait 2 - 4 minutes after the standby light displays.
9) Switch on all connected equipment at the mains socket.
10) Press Sky to switch on the Sky box. The green light displays.
Please let me know how you get on with this and I will be able to help you further if required.
Many Thanks,

Similar Messages

This display does not support HDCP

Hi
To help Sky with this issue, would you be able to let us know the following?
Have you been able to fix it - if so, what did you do to fix it?
Your Sky+HD box model number (Services > Settings > Details)
The make & model of TV
Other than your Sky box, what other equipment do you have connected to the TV's HDMI ports?
Does unplugging them correct the issue?
Thanks for your help.

Not sure if it's any help but I recently purchased a new 4x2 matrix switcher and slim HDMI leads. This message would pop up on a regular basis and I assumed it was the switcher and/or leads. I pulled everything apart and put it all back together, this time ensuring that the HDMI leads were properly seated. No problems since, so I can only assume that I hadn't connected one of the leads correctly.

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

No.

Can i play a movie on apple tv if my computer does not support HDCP?

The iTunes store sais that I can´t play a movie on my PC because it does not support HDCP. Do I am able to watch it on Apple TV anyway?

myquestionis123 wrote:
I don`t know i haven`t try it yet. Don`t want to take the risk that I can`t watch it...
What is the risk? It will work (it should) or it won't.

Included Mini-DVI to DVI adapter does not support HDCP and iTunes HD movies

Hi.
Just downloaded Twilight in HD (to own) from the iTunes Store and had the annoying message about HDCP not being supported by my display, and that I could not play the movie in HD.
My Mac Mini is plugged to a very HDCP-compliant Sony Bravia 40" LCD TV via Apple's mini-DVI to DVI adapter (included in the new Mac Mini's box) and a DVI to HDMI cable.
(HDCP works well for this TV with a PS3, another Sony Blu-Ray player (the 2 are for zones A and B), an AppleTV)
Since I have other recent Macs with a Mini DisplayPort, I happen to also have an Apple branded Mini DisplayPort to DVI adapter.
So I replaced the (mini-DVI to DVI) adapter by the (Mini DisplayPort to DVI) adapter and plugged it on the Mini DisplayPort on the Mac Mini.
I can now play the HD version on my Sony TV!!
This really sounds like a joke!
A joke that is going to make me go the shop and buy another (Mini DisplayPort to DVI) adapter, since I like to always have one, as well as the VGA adapter, with my MacBooks.
Let's hope there will sonn be an iTunes, Leopard, or mini-DVI to DVI adapter firmware update very soon to fix this.

I am actually very surprised that your miniDisplayPort to DVI transition works with HD content.
I'd consider that a bonus and cherish it until Apple removes that functionality in a future update.
It is probably a bug as it should not work.
The thing to keep in mind is that DVI cables do not support the necessary DRM/encryption signals for HD video content.
This is one of the main reason DisplayPort was introduced.
So I am not surprised that miniDVI to DVI to HDCP does not play HD content on your TV.
In fact this is +expected behavior+ due to the lack of DRM/encryption signals.
No matter how you convert from miniDVI to DVI, the port cannot create something that it doesn't have in the first place.
The more I am surprised that the miniDisplayPort to DVI to HDCP transition provides these signals. I would have expected them to be filtered out in the DVI cable in the middle as this cable cannot pass something on that DVI is not designed to carry (HD DRM/encryption signals).
It could very well be a 'bug' in the miniDisplayPort to DVI cable controller, which Apple might 'fix' in a future driver update.
It is likely a mistake that this works.
What you really need is a miniDisplayPort to DisplayPort to HDCP conversion. Or directly a miniDisplayPort to HDCP cable. Those are the only routes that are guaranteed to work passing HD video DRM/encryption signals along.
But as far as i know neither of these two cables are available yet.
Which might be the reason why Apple - for the time being - allows your miniDisplayPort to DVI route to work. Emphasis on +for the time being+.
I would not count on the fact that this will work forever.
And I would certainly not count on a software update that will make the DVI route work. This will never work due to DVI's incapacity of providing DRM/encryption signals for HD content.

My hdmi connection does not support hdcp

how do i get my hdmi connection to support hdcp

It's your TV that needs to support HDCP, most TV's that have HDMI do support HDCP, check with your manufacturer whether it does, it may be you have a fault if the TV supports HDCP. If it doesn't support HDCP, there isn't anything you can do except get a new TV.

I have tried to display a hd video downloaded from the store on my Samsung hd tv. Message on MacBook pro retina says that display does not support the right type of drm. What's going on here?

Cannot display hd video from MacBook pro via hdmi on my Samsung hg tv. Says wrong type of protection for drm or words to that effect. This is a big pain

Maybe to do with HDCP?
http://en.wikipedia.org/wiki/HDCP

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

SSRS 2014 Does not support vertical text in Chrome, Safari and FireFox

Why SSRS 2014 does not support "Writingmode=Vertical " forTextbox in Chrome, Safari and Firefox ?
It is showing horizontaly in all browsers. in IE versions it is vertical.

You can report such browser issues here directly to SSRS team:
What browser rendering issues do you need fixed?
Olaf Helper
[ Blog] [ Xing] [ MVP]

TS3354 I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support. Why do I get the message in itunes that my hardware does not support it?

I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support. Why do I get the message in itunes that my hardware does not support it?
I downloaded 1080p content, not sure why this would not work with the hardware I have.
Bryan

Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
[ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
NVRM: this kernel module has the version 304.60. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
Output of pacman -Qs nvidia:
local/conky-nvidia 1.9.0-2
An advanced, highly configurable system monitor for X based on torsmo
local/lib32-nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libvdpau-git-flashpatch 20120825-1
Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
local/libxnvctrl 304.51-1
NVIDIA X Ctrl library
local/nvidia 310.19-2
NVIDIA drivers for linux.
local/nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries.

Quicktime Does Not Support Current Display Setting...

When I have iTunes open (minimized or full screen) and lock my computer (Windows Key + L, goes to switch user screen) in Windows XP Pro SP2 I am getting the following message:
Unsupported Display
"QuickTime does not support the current Display Setting. Please change it and restart this application."
This happens on my work computer and home computer, both running Windows XP SP2 (Home and Pro). It happened in iTunes 7.0, 7.1 and now 7.2. Is this a known issue with iTunes/QuickTime, and how can it be resolved?
Windows XP Pro
Windows XP Pro iTunes 7.2

I don't know why everyone is having weird problems with Itunes. I switched from Yahoo! Music Jukebox about a month ago because of a few issues their. I have updated twice sense switching. I'm running the latest version 7.4.3.1 I don't want or have a ipod, but sense I sense I switched other than Missing album art & Itunes editing my library I've had 0 problems with Itunes, it plays & opens Has never froze. I spend a lot of time in the forums to try to help people with the probles with Itunes.

E18 - "Your display server does not support XComposite..."

I used e17 quite a bit, but since it was upgraded to e18, I've run into this problem.
ESTART: 0.00000 [0.00000] - Begin Startup
ESTART: 0.00004 [0.00004] - Signal Trap
ESTART: 0.00004 [0.00000] - Signal Trap Done
ESTART: 0.00005 [0.00001] - Eina Init
ESTART: 0.00019 [0.00013] - Eina Init Done
ESTART: 0.00019 [0.00000] - Determine Prefix
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:25^[[0m =================================
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:26^[[0m Enlightenment relocation handling
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:27^[[0m =================================
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:28^[[0m PREFIX: /usr
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:29^[[0m BINDIR: /usr/bin
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:30^[[0m LIBDIR: /usr/lib
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:31^[[0m DATADIR: /usr/share/enlightenment
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:32^[[0m LOCALE: /usr/share/locale
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:33^[[0m =================================
ESTART: 0.00027 [0.00009] - Determine Prefix Done
ESTART: 0.00034 [0.00007] - Environment Variables
ESTART: 0.00036 [0.00001] - Environment Variables Done
ESTART: 0.00036 [0.00000] - Parse Arguments
ESTART: 0.00037 [0.00001] - Parse Arguments Done
ESTART: 0.00037 [0.00001] - Eet Init
ESTART: 0.00163 [0.00126] - Eet Init Done
ESTART: 0.00164 [0.00001] - Ecore Init
ESTART: 0.00512 [0.00348] - Ecore Init Done
ESTART: 0.00514 [0.00001] - EIO Init
ESTART: 0.00516 [0.00002] - EIO Init Done
ESTART: 0.00517 [0.00001] - Ecore Event Handlers
ESTART: 0.00517 [0.00001] - Ecore Event Handlers Done
ESTART: 0.00518 [0.00000] - Ecore_File Init
ESTART: 0.00566 [0.00049] - Ecore_File Init Done
ESTART: 0.00567 [0.00001] - Ecore_Con Init
ESTART: 0.00567 [0.00000] - Ecore_Con Init Done
ESTART: 0.00568 [0.00000] - Ecore_Ipc Init
ESTART: 0.00569 [0.00001] - Ecore_Ipc Init Done
ESTART: 0.00569 [0.00001] - Ecore_X Init
ESTART: 0.00958 [0.00388] - Ecore_X Init Done
ESTART: 0.00959 [0.00002] - Ecore_Evas Init
ESTART: 0.00978 [0.00018] - Ecore_Evas Init Done
ESTART: 0.00978 [0.00001] - Elementary Init
ESTART: 0.01301 [0.00323] - Elementary Init Done
ESTART: 0.01302 [0.00001] - Emotion Init
ESTART: 0.01645 [0.00344] - Emotion Init Done
ESTART: 0.01646 [0.00001] - Ecore_Evas Engine Check
ESTART: 0.01647 [0.00001] - Ecore_Evas Engine Check Done
ESTART: 0.01648 [0.00000] - Edje Init
ESTART: 0.01648 [0.00001] - Edje Init Done
ESTART: 0.01649 [0.00001] - E Intl Init
ESTART: 0.01650 [0.00002] - E Intl Init Done
ESTART: 0.01651 [0.00001] - E_Alert Init
ESTART: 0.01651 [0.00000] - E_Alert Init Done
ESTART: 0.01652 [0.00000] - E_Hints Init
ESTART: 0.01683 [0.00031] - E_Hints Init Done
ESTART: 0.01683 [0.00001] - E_Configure Init
ESTART: 0.01687 [0.00003] - E_Configure Init Done
ESTART: 0.01687 [0.00000] - E Directories Init
ESTART: 0.01695 [0.00008] - E Directories Init Done
ESTART: 0.01696 [0.00001] - E_Filereg Init
ESTART: 0.01696 [0.00001] - E_Filereg Init Done
ESTART: 0.01696 [0.00000] - E_Config Init
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1223^[[0m Performing config upgrade for 1.12
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1244^[[0m Performing config upgrade for 1.13
ESTART: 0.01766 [0.00070] - E_Config Init Done
ESTART: 0.01767 [0.00001] - E_Randr Init
E_RANDR CONFIG RESTORE
Calculated Screen Size: 1920 1080
ESTART: 0.01850 [0.00083] - E_Randr Init Done
ESTART: 0.01850 [0.00001] - E_Xinerama Init
ESTART: 0.01851 [0.00001] - E_Xinerama Init Done
ESTART: 0.01851 [0.00000] - E_Env Init
ESTART: 0.01851 [0.00001] - E_Env Init Done
ESTART: 0.01852 [0.00001] - E_Scale Init
ESTART: 0.01851 [0.00001] - E_Env Init Done
ESTART: 0.01852 [0.00001] - E_Scale Init
ESTART: 0.01853 [0.00001] - E_Scale Init Done
ESTART: 0.01854 [0.00000] - E_Pointer Init
ESTART: 0.01854 [0.00001] - E_Pointer Init Done
ESTART: 0.01855 [0.00001] - E Paths Init
ESTART: 0.01856 [0.00001] - E Paths Init Done
ESTART: 0.01857 [0.00001] - E_Ipc Init
ESTART: 0.01864 [0.00007] - E_Ipc Init Done
ESTART: 0.01864 [0.00001] - E_Font Init
ESTART: 0.01865 [0.00001] - E_Font Init Done
ESTART: 0.01865 [0.00000] - E_Font Apply
ESTART: 0.01866 [0.00001] - E_Font Apply Done
ESTART: 0.01866 [0.00000] - E_Canvas Recache
ESTART: 0.01867 [0.00001] - E_Canvas Recache Done
ESTART: 0.01868 [0.00000] - E_Theme Init
ESTART: 0.01870 [0.00002] - E_Theme Init Done
ESTART: 0.01870 [0.00001] - E_Moveresize Init
ESTART: 0.01871 [0.00001] - E_Moveresize Init Done
ESTART: 0.01871 [0.00000] - Efreet Init
ESTART: 0.01980 [0.00109] - Efreet Init Done
ESTART: 0.01981 [0.00001] - E_Intl Post Init
ESTART: 0.02764 [0.00783] - E_Intl Post Init Done
ESTART: 0.02766 [0.00002] - E_Actions Init
ESTART: 0.02800 [0.00034] - E_Actions Init Done
ESTART: 0.02801 [0.00001] - Screens Init
ESTART: 0.02801 [0.00001] - screens: atoms
ESTART: 0.02820 [0.00019] - screens: manager
ESTART: 0.02822 [0.00002] - screens: container
ESTART: 0.02823 [0.00001] - screens: zone
ESTART: 0.02824 [0.00001] - screens: desk
ESTART: 0.02824 [0.00001] - screens: menu
ESTART: 0.02826 [0.00002] - screens: exehist
ESTART: 0.02827 [0.00001] - screens: get roots
ESTART: 0.02828 [0.00001] - screens: focus
ESTART: 0.02828 [0.00001] - screens: border
ESTART: 0.02830 [0.00002] - E_Comp Init
<<<< Enlightenment Error >>>>
Your display server does not support XComposite, or Ecore-X was built without XComposite support. Note that for composite support you will also need XRender and XFixes support in X11 and Ecore.
<<<< Enlightenment Error >>>>
Enlightenment cannot setup compositing.
E18: Begin Shutdown Procedure!
^[[31mERR<^[[0mefreet_cache^[[31m>^[[0mlib/efreet/efreet_cache.c:1108^[[0m org.enlightenment.DBus.Canceled Canceled by user.
E - PID=849, valgrind=0
Apparently ever since they upgraded from e17 to e18, they now require XComposite. I'm using the default package through pacman. Pacman installed all the required packages it apparently needs. I've tried uninstalling e18 completely and reinstalling which didn't work. When I do a pacman search for XComposite, E-core-X and XRender, the updated libraries show up.
Do I need to build every package from scratch just to get this to work? Or is there an easier way? I tried googling the problem, but only four sites came up with three being .c code. The other didn't offer any real help.
Thank you in advance for any help.

Scimmia wrote:hmm, 1.9.3-1 was just released, but 1.9.2-1 should work just fine. Anything custom in your X setup? How about trying a clean configuration (rename ~/.e and let E recreate it)?
There's nothing custom in my X setup. I've tried deleting the .e folder but still no luck. I'm not sure if it helps, but here's my xorg.conf file. I'm also using the closed source NVIDIA drivers if that matters.
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1680 0
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VE258"
HorizSync 24.0 - 83.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VW224"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x90$
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

Audi 2014 MMI does not support IPOD

I just bought a Q5 Audi 2014 and when connecting my IPod Classic the MMi system says it does not support this IPod!
I had a 2011 Q5 with the same connector and it worked perfectly!
Anyone knows how to fix this problem?

I resolved the problem like this!
I went back to the dealer and compared the two wires, the one from my 2011 compared to the wire of the 2014.
The 2 wires look alike but the 2011 has a blue ring at one end end the 2014 has a red ring around it!
That right there is the difference!
The red wire is incompatible with the Classic 160 Gig. You need the wire with the blue ring!
The same as the one in the 2011 model.
Mind you Audi might want to charge you for the wire, that is for you to resolve with them, also note that the blue wire will NOT work with the Iphone 5S or some of the newest IPODS, check the compatibility list of both wires.
Have a good New Year!

Suddenly " display does not support HDCP " - March 2014

Similar Messages

Maybe you are looking for