Suddenly group won't send

For the past 2 years, I have been sending a daily post to a group I have created. Over this time, I simply type in the name of the group and it goes out en masse. I created second group over the weekend and now when I type in the name of the first group, I get an email error message saying the name is an invalid email address.
Anyone have a solution or suggestion? Please?

If there are not too many in the old group, try sending an individual message to each of them - I would like to eliminate the possibility of one of the addresses being faulty.
If there are a lot in the group, make another new group, drag half of the original group to it then delete that half from the original group. Send group messages to the original (group 1) and latest (group 3) and report back.
AK

Similar Messages

  • Only one Mac won't send mail

    I have 4 macs in the house, and suddenly one won't send email. all the others will. No changes, upgrades nothing. I have tried all the suggestions in the discussion for this problem. Also it is intermittent. Works sometimes, other times nothing. I have both a cox and .mac account

    you posted this in the BATTERY AND POWER section of the MBA forum - you might get a better response by posting in the OSX or MAIL forums....

  • My imac's mail programme won't send my mail!

    The imac has my hotmail linked to it, and has never had any problems but suddenly it won't send mail.  It says it timed out when connecting to live.com.  I have tried reinstalling the hotmail account but it didn't fix it.  Does anyone have any ideas how to fix this?  My iphone is working fine with the account and it also works with hotmail over the internet.  I am stumped!

    I've had exactly the same issue over the past couple of days and this fix has just worked for me (thanks untzy) but I guess it hinges on you being with BT.
    1. Login to your BT home hub manager (this can be done using the router address located at: system preferences/network/advanced/TCP/IP)
    2. Input your router address into the web browser search bar
    3. Once on the access page you will need to input your wireless admin password (found on the back of your router)
    4. When you are on the home page, you will need to follow the following steps to change your device name:
    5. Select "A-Z" in the top right section of the page
    6. Click on "Home Network" from the available list of options
    7. Click on the Device in question (it should be showing as connected - I identified mine by the mac address, although it was named as 'unknown')
    8. Under Device Information, enter a new name (be sure this is memorable in case you need it again)
    9. Ensure Always use this address is set to Yes (it is by default)
    10. Click Apply.
    You will then need to restart your computer - after this, hopefully the problem will be resolved....

  • My Iphone 5 won't send pictures or accomplish group messaging. Please advise! If cannot be fixed soon I will switch to the Galaxy phone. Anyone else having this issue?

    My iphone 5 won't send pictures or accomplish group messaging. Anyone else having this problem? Will be switching to Galaxy if not fixed soon.

    Hi celtics3456,
    If you are having issues with intermittent message delivery in Messages, you may find the following article helpful:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • How do I fix my 3gs after 6.1.3 update? It will no longer send / receive group messages and won't send pic text messages either.

    Ever since I updated my 3gs (on ATT) to 6.1.3, it will no longer send or receive group texts, and it won't send picture messages
    (though I seem to be able to receive picture texts). I've looked around on the boards, and here's what I've tried so far (to no avail):
    1. Tried simply turning off / on
    2. Tried hard reset
    3. Tried having imessages off
    4. Turned group messaging off / on (tried while it was off)
    5. Turned off all messaging, turned phone off / on, turned all message settings back on
    6. Reset network settings
    Help! Argghh!!! I never had this much trouble when my previous phone was jailbroken! Here I am, trying to be good!

    Thanks, Nick. Calling ATT is a last resort; it's a software issue, I'm sure, and I've also found other
    people having the same issue, but none of the fixes work. I reset all my settings: nothing. I'm not sure what you mean by restrictions.

  • Why won't my I-Phone 4 all of a sudden not let me send picture messages?  It keeps coming up with the exclamation at the side of the unsent message/picture.

    Why won't my I-Phone 4 all of a sudden not let me send picture messges?  It keeps coming back as unsent with the exclamation mark.

    Settings > Messages > MMS messaging > ON??
    If yes, contact your carrier.

  • Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today.

    Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today.  Sends fine to some but not to others.  What's up?

    Like any electronic item, it sometimes gets inexplicably balled up. The reset is no different than rebooting a computer that is acting hinky. If you don't have to do it often, then it is not anythign to worry about. (I know - not the kind of tech talk you were probably expecting, but the words selected are about as scientific as you can get concerning this type of weirdness....)
    Cheers,
    GB

  • My IPhone 6 plus won't send group texts.

    My IPhone 6 plus won't send group texts. It will if i delete the group and recreate the group but if i continue to send texts in that group it will only send to an Iphone acount and not other cell phone brands.

    Start with soft reset then reset network settings and a possible Sim card reseat. Careful they pop out when using an earring or paperclip to remove.

  • Outgoing mail suddenly won't send

    For years I've had a POP account, using Mac Mail to send and rec ATT/Yahoo mail. In the past week or so, my account has decided it won't send anything and says the server can't be accessed. However, incoming mail works fine, and my wife's POP account on another log-in with ATT/Yahoo mail also works fine sending and receiving. I tried deleting my account and starting over, which allowed me to send one email successfully. Next time I logged in, though, it was back to balking. Any ideas?

    Hey, I found a fix for Mac who use ATT / UVerse / Yahoo!!
    The directions that are given by ATT are only good for setting up an ATT e-mail account on a Mac. If for some reason you need to use another provider (gasp!) their settings will NOT work. The workaround is to have an agent open up port 25 so that you can use another outgoing smtp server. In my case, my provider is fatcow.com (really!). So once port 25 was opened up I could add smtp.fatcow.com as an outgoing mail server. In that case, they do require password authentication. Your case may be simpler and you may not need authentication at all (Inisight, WOW, RoadRunner etc.)
    So it is possble, despite the dearth of information on ATT's UVerse web site. : P
    Cheers,
    : )

  • Hi there, suddenly I can't send email from my iphone. I use mac mail, have deleted it, restored it, done a sync to my mac book, read endless help paged and still get the message *unable to connect to smtp.me.mail . Some one please help!!!

    Does anyone know why my mac/me mail would suddenly stop sending mail? Happend a few weeks back since the software update and now won't send a thing. LIke I said I deleted the acount, set it up again, did a sync to my mac book, checked settings again and still it wont send mail. Received fine.
    I've looked through the threads but cant find one for me/mac mail on the iphone with same problem

    I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
    As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
    Hope that helps get some on the right path to resolving their issues!

  • Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hey lozza567,
    Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Issues with sending and receiving MMS
    You will need these to send and receive MMS:
    - An iPhone 3G or later.
    - iOS 3.1 or later.
    - A cellular data connection. MMS isn't available if you are using only Wi-Fi.
    - A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
    - A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
    To resolve issues with sending and receiving MMS, follow these steps first
    1. Go to Settings and turn airplane mode off.
    2. Go to Settings > Messages and turn MMS Messaging on.
    3. Go to Settings > Cellular and turn Cellular Data on.
    4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
    5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
    6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
    8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    9. Restart your iPhone.
    10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    11. Reseat your SIM card.
    If you are still unable to send or receive MMS, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
    3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
    4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
    5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    7. Back up and restore your iPhone as new.
    8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
    9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
    10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
    11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
    Thanks,
    Matt M.

  • My I messages won't send. Any ideas ?

    All of a sudden my I messages will not go through. It says it was sent, and within a second it says it was not sent. When I retry, it still won't send. These messages are to a person that I text all the time, so I know it did work. Any ideas?

    Then to answer your original question, "Yes."  The Apple Store Genius Bar can help you.
    http://www.apple.com/retail/locator/

  • Mail replies won't send in OS 10.8.3

    Replies to mail messages that have a link within the message won't "send" unless I delete the link and any other messages beneath the message I am replying to .  Message hangs up in activity window . I've checked with my ISP and all is fine there.  My older iMac running OS 10.6.8 mail works flawlessly .  What is going on here?  New messages "send" o.k.   So I'm clueless and bummed about what appears to be some mail glitch on ML.
    Also, what is this new "envelope shaped" mail format with the blue border ?  Is there some option to change the format back to the regular " letter shaped" mail format ?
    Thanks for any help !
    Carolyn.  a.k.a. gladys2

    So far, no big change, but I have figured out how to circumvent the problem by just deleting anything  I'm replying to other than the last message in a group of "back and forth" mail.  (if that makes any sense).  Its a minor hassle, but I'm not willing to risk messing up things by getting into areas where I'm not comfortable.... like messing with the Library.
    I did run Repair Permissions a couple of times after I had tried everything else that was obvious, shut down, unplugged and restarted. I also sent an e-mail to Apple support and told them what I thought about Mail in ML.
    It comforts me somewhat to see that there are a lot of folks out there with the same type problems, each with variations on the theme ! :-)
    I do appreciate all you suggested.  If you come up with any other easy ideas, let me know.  You are a good guy to show concern and try to help !
    Carolyn

  • All of a Sudden I can't send emails! I can receive on imail, but not send. any ideas?

    Hi everyone
    I am having issues with my emails that I have set up on my Mac Book Pro.
    I am able to receive them fine, but the SMPT server now won't send any.
    This has happened in the past and I have just deleted the email account, and re-started it... which works fine, until 1 day then it suddenly stops sending again.
    I'm fed up doing this however and want it sorted for good.
    Does anyone have any ideas? Greatly appreciated!
    Stuart

    There are only two things that I can suggest.
    The first is to try the Mail Setup Assistant.
    The other is giving Mozilla's Thunderbird a shot - setup the account and see if it will work with this free email app. I don't like Mail at all - and it gives some people fits around here (I don't know how many times people have posted about problems with outgoing servers using Mail).
    Try both methods - I don't use Mail - I use MS's Outlook (and, before that, Entourage). If the Setup Assistant offers no relief, just try Thunderbird and see if it works with it.
    Good luck,
    Clinton

  • IChat won't send written messages...but will connect to do an audio chat...

    I'm not sure what happened, but my iChat just stopped sending text-based messages. I can log on, click on a person, and type a message, but it won't send. I can, however, connect and do an audio chat. Has anyone had this happen before??

    Hi,
    Next Bit.
    In iChat > Preferences > Accounts then the Server Settings tab, what is the Login port currently in use ?
    For AIM Logins this is normally 5190 by default. We post about changing it to 443
    Is SSL an Option for you and is it Selected ?
    Try it deselected if you have it (iChat 5) - you need to be logged out to make changes.
    iChat logs in on port 5190 on the TCP Protocol with any Buddy list that accesses the AIM Service.
    It also uses this same port but on the UDP Protocol for File Sending, Direct IMs (Those with Pica and Files sent in them) and group chats. Some Buddy list Feedback is also on UDP.
    Changing the Login port separates the dual use.
    If the AIM SSL server goes down iChat needs a manual reset to get it to work again.
    If changing either of those does not produce any changes then try Deleting the Account/Screen Name from iChat then Re-adding it again.
    You will not lose your Buddy List as it is held at the server end.
    7:11 PM Thursday; March 3, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for

  • IMovie 11 only imports one file at a time

    Recently, aside from the legendary stability issues (decent today, thank you very much) - I am working on a lenghty project with dozens of clips, but in the Import Movies dialog, no matter how many files I select, I only get ONE file. I have to go ba

  • Change default document date ?

    Hi guru, When posting material docs in t-code such as MB1A, MB1C, document date is defaulted from current system date. I want to change the document date to be suggested from an add-on table. I've investigated MB* enhancements without fruitful result

  • Error deserializing arguments, xml tag without a recognized type

    I am trying to run a webservice created using Weblogic Workshop 8.1sp2 that communicates with an ejb control. When I test in debug mode, I get the above error, specifically: <detail> <jwErr:jwErrorDetail xmlns:jwErr="http://www.bea.com/2002/04/jwErro

  • GR based IV ticked

    Dear Expert, I have some doubt on GR based IV indicator in PO. Let say i have 1 PO with quantity 100 ,GR based IV was ticked. 1st,i do GR 40,then proceed IR. 2nd time,i do GR 60 then i reverse 60 using mvt 122,how come system still allow to proceed I

  • Scripting in  animate who can help

    Looking for someone to help with scripting in projects