Suddenly ipad not recognised on windows xp

weird, been using IPAD, IPOD and Iphone connected to my laptop (windows XP) and now itunes doe snot recognise them at all. been through usual checks and Itunes is working fine in all things apart from external device recognition!!!

See Here for
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538

Similar Messages

  • IPad not recognised in windows XP

    iPad not recognised in windows XP after update to ios 6.1

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/

  • Ipad not recognised by windows 7

    I have followed the instructions around windows 7 not recognising my ipad and it has led me here.
    It was recognised the first time I connected, but not since.
    The only thing I'm not sure about is conflicting programs that may have an affect. I am with Virginmedia and use their in house security program.
    Any help would be useful
    Thanks

    ps - "comnents" = "components"

  • IPad not recognised in Windows XP since upgrading to IOS 7.0

    I have updated my iPAD to IOS 7.0, however I now get "USB device not recognised" when I attempt to sync via cable to my Windows XP laptop.  Any ideas?

    try this and this, it may be helpful
    dante

  • Ipad not recognised in windows 7

    I have recently upgraded my computer to Windows 7 but although the computer recognises the iPad iTunes does not.
    My iPod is recognised without problem
    I have uninstalled iTunes and reinstalled it with no change.
    Any suggestions please ?
    Peter

    Having removed and reinstalled iTunes I get an error.
    "iTunes could not connect to this iPhone. An unknown error occured (0xE8000084)"
    As it's an iPad not an iPhone I have no idea why this decive is not reconised by iTunes even though Windows 7 sees it ok.
    Peter

  • My iPad suddenly does not recognise my you tube password yet it works on my laptop

    My iPad suddenly does not recognise my you tube password yet it works on my laptop.

    Find Apple ID
    https://iforgot.apple.com/applied
     Cheers, Tom

  • Iphone 4s is not recognised by my pc; I get a message to say that the device malfunctioned and not recognised by windows

    My iphone 4s is suddenly not recognised by my pc; I get a message to say that the USB device is not recognised, and that the last device malfunctioned and not recognised by windows.

    Hey Jacky,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides information and troubleshooting suggestions that can help you resolve the issue with your iPhone 4s not being recognized by iTunes on your PC.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Cheers,
    -Jason

  • Ipod in not recognised by windows or itunes. PLEASE HELP!!!!!!!!!!

    I have a 5th gen 30gb video ipod which was fine up until the start of january when i tried to connect my ipod to my laptop and it was not recognised by windows as a usb device, i'v been through the device manager and can not find it there. USB port are fine as other things connect, i've tried 3 different usb cables. I've run diagnostics and got the following
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Inspiron 1501
    iTunes 7.5.0.20
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Current user is an administrator.
    The current local date and time is 2008-01-15 13:16:51.
    Video Display Information:
    ATI Radeon Xpress 1150
    ** iPod Connectivity Tests **
    iPodService 7.5.0.20 is currently running.
    iTunesHelper 7.5.0.20 is currently running.
    Apple Mobile Device 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.2.3
    Serial Number: 8M6398VKV9K
    Can someone please please please help me, i've run the 5 r's, i've tried to put it in to disk mode etc etc and still it will not connect.
    it looks like many people are having this problem with the same model.
    You can e-mail me direct on [email protected] if easier.

    Same as, although a new development on this last night, I borrowed a mates USB hub that has it's own mains power supply and for a short time my laptop recognised my IPOD, I obviously thought i had found the solutions as it started to sync at which point the smug smile left my face as i could smell burning plastic. Yep, the usb cable was melting in to the USB hub. so not only won't the sodding thing work properly it is a god **** fire hazard. Luckily our producst that cost hundreds of pounds are supported by friendly and helpful people at Apple!!!!!!!!!!!!
    Oh and i downloaded itunes 7.6 last night and nothing.
    PLEASE HELP!!!!!!!!!!!!

  • Shuffle is not recognised by Windows or iTunes on first installation

    Hi
    Just got an Ipod shuffle, which was marked down in price due to missing ear phones. Tried the installation software but when asked to connect shuffle to check to see if it needs formating did so, and the shuffle is not recognised by windows or the installer software.
    Tried to go through apple chat, but when prompted for S/N it says that my shuffle was registered in Aug 2005 and not valid for chat support anymore. I suspect that the shuffle is returned goods and that it may already be registered to another user. Would this stop my computer recognising it?
    Have downloaded updater and run that, same result.
    OS is Windows XP Pro
    USB port confirmed working
    Itunes 6.0.4.2
    Ipod Nano running okay on same machine.
    Ipod Shuffle is only showing constant green light when plugged into USB port (showing that it is at least getting power)
    Any ideas, there seem to be similar threads to this so is it a common problem.
    thanks
    CDR

    Did you try all the steps here:
    http://docs.info.apple.com/article.html?artnum=61711?

  • Ipod 5 not recognised by windows or Itunes, no drivers found in devmgmt.msc

    Hello there.
    My Ipod 5th Gen is having problems. When I try to connect it to my windows 8 laptop I get nothing. Not even an "unrecognised device" message. I am guessing there is no driver to process it, or something like that. All my other USB devices are working.
    I have tried all the ideas listed on the support. when I take a screenshot and try to find it as a camera, nothing appears. There is no "portable devices" section, no "other devices" section. It is completely unresponsive.
    I have no conflicting software, and everything has been reinstalled, including AMDS.
    Here is a screenshot of my Devmgmt.msc:
    thanks In advance.
    Joseph

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • Ipod 5th generation not recognised by windows 7

    HIIII,
    Purchased an ipod touch 5th generation on 5th december 2013, couple of months ago the home button stopped working. completely!
    I switched to assertive touch and so far its been pretty good.
    but with the recent update of the software 8.1 i think my windows 7 laptop wasn't recognising the device and nor was it syncing or being recognised by itunes.
    I tried resetting the ipod and my laptop but none of it works.
    would appreciate your help.
    Thanking you.
    Deb

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • TS1538 iPhone 5 is not recognised by Windows 7

    My iPhone 5 is not recognised by Windows or iTunes at all. It does not appear in Devices & Printers or Device Manager. Nothing happens to Windows when I insert the cable into the USB port. Is it possible that it is a faulty cable, or is there a software issue that I am unaware of?

    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.itunes.com/download)
    From Here  >  http://www.apple.com/iphone/specs.html
    More Info Here...
    http://support.apple.com/kb/TS1538

  • IPod not recognised by windows iTunes

    iPod not recognised by windows 8 computer.
    After I recently updated iTunes I plugged my iPod Touch 4th Gen into my windows 8 desktop.
    It was not recognised as an iPod by iTunes, only as a storage device in MS Windows.
    After much searching I identified the problem was there was no apple mobile device USB driver installed.
    I searched for … devmgmt.msc
    Which opened the Device Manager
    In Device Manager, under Portable devices, the Apple iPod should have been listed. It wasn’t.
    So I Right Clicked on ‘Apple iPod’ and left clicked on ‘Update Driver Software’.
    Then ‘Browse my computer for driver software’.
    Browsed to this location … Windows (C) / Program files / Common Files / Apple / Mobile Device Support / Drivers /
    And then clicked on ‘usbaapl64’
    It installed the Apple mobile device USB Driver, as it should have done already, when I recently updated iTunes.
    Could someone check the above to see if I have described the problem and the solution correctly.
    Thanks. Chris KV

    OK, update to try to provide a clearer description of the problem and solution that worked for me.
    Problem.
    After I recently updated iTunes I plugged my iPod Touch 4th Gen into my windows 8 desktop. It was not recognised as an iPod by iTunes, only as a storage device in MS Windows. After much searching I identified that there was no Apple Mobile Device USB driver installed. Without the driver Windows did not recognise the Apple iPod when connected via USB.
    Solution.
    I needed to use the Windows Device Manager, so I searched for … devmgmt.msc (You need to include the .msc) and clicked on it, which opened the Device Manager in a new window.
    In Device Manager, under Portable devices, the Apple iPod should have been listed. It wasn’t.
    So I Right Clicked on: ‘Apple iPod’ and left clicked on: ‘Update Driver Software’.
    Then clicked on: ‘Browse my computer for driver software’.
    Then clicked on browse and drilled down to the following location on my hard drive:
    C:\Program files\Common Files\Apple\Mobile Device Support\Drivers /
    And then clicked on ‘usbaapl64’
    This installed the Apple Mobile Device USB Driver.
    Now Windows recognises my iPod again.
    PS. I can’t remember if I had to restart the computer once the device driver was installed. But if the above doesn’t work for you, then at the end, try restarting to see if that finishes the installation of the device driver. Good luck
    ChrisKV

  • Help - my iPod Nano is not recognised by windows

    Hi I have recently bought a new ipod nano (8gb Aluminium case) and it is not recognised by windows. I have run through all of the trouble shooting tips (reseting ipod, reinstalling itunes, getting latest windows updates, even deleting my temp files). I have also tried all USB ports and tested them with a memory stick to make sure that they are working.
    I can hear the standard windows sonic (ding-dong) when I plug in the ipod, but there is no indication of it in my computer or itunes.
    Can anyone help me here?

    Have you tried putting your iPod into disk mode, then connect it to your computer?
    Putting your iPod into disk mode
    If that doesn't seem to work, try out all the troubleshooting steps in these links:
    The Five R's
    iPod missing in My Computer or in iTunes
    -Kylene

  • Ipod not recognised by Windows - need urgent help!

    Just bought my Ipod Mini. Found out that Ipod is not recognised by Windows because Ipod is configured for Mac...
    Restoring to factory settings not possible because Windows does not see the Ipod. What can I do?
    laptop   Windows XP  

    First, make sure that the iPod is fully charged.
    iPods come pre-formatted for Mac, so you will need to format it for Windows.
    See this article to verify its format: How to determine iPod's hard disk format.
    Make sure that you have the latest iPod Updater software
    - Download the Update Installer to your PC (do not run it from the web site).
    - Place the file on the Desktop, or in a Folder you can remember/find.
    - You also need to install the Updater software by double-clicking on the file that downloads.
    - After you install the Updater to your PC, reboot your computer.
    - After rebooting, run the Updater.
    --- Go to: Start ==> Programs ==> iPod.
    - It should initialize then ask you to connect an iPod.
    - Connect the iPod when asked (not before) and you should have two options available: Update or Restore.
    --- Choose the Restore option and it will update your iPod's firmware to the latest version and format (erase) your iPod's hard drive.

Maybe you are looking for

  • Attachments lost in Apple Mail

    Apple mail is routinely losing attachments in threads. Going back to the original message in a thread the attachments are gone. There are only placeholders with the file names. Rebuilding the mailbox doesn't work and they're gone from iCloud too. Any

  • Possible to determine exception thrown in a finally block?

    I believe the answer to this is 'no', but I thought I would ask just to confirm. If an exception is thrown in a try block, is there a way in the finally block to determine what exception was thrown? I tried using Throwable#fillinStackTrace and Thread

  • Error IWAE0037E when migrating mid-sized WebLogic 8.1 project

    Hi guys, I am working on a project to upgrade legacy WebLogic 8.1.5 application into Workshop 9.2.2 using the migration tool. I am getting the following error message when trying to compile the migrated EJB entity bean codes. No warnings were reporte

  • Exchange Rate in Billing Document and FI document differ

    Hi, We're facing an issue with the exchange rates b/w 2 currencies in the FI document. While the billing document shows one exchange rate for the item (based on pricing date of invoice) , the FI document shows a different exchange rate(latest date in

  • PDF file Pagination Question

    I work as a trainer in a law firm. A paralegal at the firm just got a disc of Ediscovery PDF files from an outside source. She is using Acrobat X Pro. When looking at a two page document from the disc, the Adobe toolbar gives the page numbers as 18-1