Suddenly my iCal has begun showing two lines for each birthday in my address book

Suddenly my iCal monthly view has begun listing two lines for each birthday from the address book. I didn't make any changes to the preferences. How do I return to one listing per birthday?

I've noticed this as well. I think it started with 10.7.4.

Similar Messages

I imported events from iphoto into aperture and aperture is showing 2 photos for each picture, one original and one edited although none of the photos from iphoto had been edited. Any idea why this has happened and what I need to do to prevent this.

I imported several events for iPhoto into Aperture3 and in Aperture it shows two photos for each photo imported, one original and one edited although none of the photos imported were edited. Why has this happened and what do I need to do to prevent this in future. I have only recently got Aperture and am trying to learn as I go along using the Focal Press guide. Thanks for any help.

Ir. Bob wrote:
A photo that was rotated in iPhoto will also show up as iPhoto edited.
This is not what I found to be the case in a recent experiment using iPhoto11- I did repeat it to be sure.
https://discussions.apple.com/message/15586837#15586837
Quickly, what I found is that only the ones I did actual adjustments on brought over two images. Images that were simply rotated, had "quick fixes" or "Effects" did not bring in two images. More importantly, among the ones with adjustments that did bring in two images, the ones with the keyword "iPhoto Edited" appear to be nothing more than iPhoto's 6MB JPEG Previews. The master was a 25MB RAW image.
I don't know why some users are experiencing doubles on everything, but I recommend caution in deciding which ones to remove or you may find yourself deleting masters and keeping previews.
DLS

My new macbook pro (lion) iCal has been showing the wrong date?

My new macbook pro (lion) iCal has been showing the wrong date for stored events - even though i have put the appointment in on the right date when I look it up a week or so later it has changed?
I think it might be showing 2011 date? How can i fix this and do I have back-up of my original dates?

Good to hear . Happy computing!

Selection screen in Cc reporting showing two lines when changed Person Res.

Hi Guruz
I have changed Person responsible in Cost centre hierarchy. Now I have two interval with different person responsible 1st one is from 01.01.07 to 31.12.2008 and 2nd one is from 01.01.2009 to 31.12.9999. When I go to cost centre report and look for the cost centre fo this cost centre system is showing two lines one with 1st Person responsible and second with 2nd Person responsible. I don't know how to show only latest one on the selection screen in cost centre reporting, any thoughts on this one?
Many thanks

Hi
I wanted to keep history as well as showing only latest line for cost centre on selection screen but unfortunately it's not possible.
The only way we can do this is change the name of person responsible from 01.01.2008 and system will show only one line. In this situation we will loose the history of the pervious person responsible for that cost centre but that's the way it works OR if you want history then we have to live with more than one line.
Many thanks

ICal only displays a single line for entries in month view.

This means I can't see what my diary entries refer to. Can I change it to show two lines or the full entry, as iCal did in Snow Leopard?

Hi Guys, thanks for getting back to me.
the problem is purely about design view display and not about coding.
Below is how CS4 displays borders with two lines which I find difficult to decipher:
Then below is Macromedia DM 8 and this how I want the borders to look, with single lines to display the tables.
This may just be the way Abobe have decided to display tables in design view and there may not be any option to change it but if you know any way to change it I would be most greatful.
Thanks again.
G

First two lines of each page... - Format Issue

I have a manual I am currently updating. I am unaware of how it was formatted initially but it is currently pushing the first two lines of each page all the way to the left margin. I have checked everything I know to check for the format setting
and have been unable to find anything out of the ordinary. Anyone have any idea what causes this?
I am using Word 2010

It may be possibly due to the indentation setting of your document.
To change it, choose the below option in your word file
Home => Paragraph => Indents and Spacing => Indentation => Left (0 pi)
Try if this work outs.

ICal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

I installed this same digitizer in my T|X some weeks ago. Some discussion of my experience may be found in this Usenet posting and subsequent thread.
The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
Eventually, it began to develop a “dead spot” near the upper left. My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way. I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
After however many weeks it has been, I am still very pleased with the results. It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior. She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail. The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
Post relates to: Palm TX

I have an iPhone 4s. Suddnely for past two days, the contact names from my address book are disappeared. Has anyone came across this issue earlier and know the solution please?

I have an iPhone 4s. Suddnely for past two days, The contact names from my address book are disappeared. Has anyone came across this issue earlier and know the solution please?

You had to have some kudos for the effort put in to your thread as week as the point you make.

Two entries for each archive log in v$archived_log

Hi,
I have noticied that there are two entries for each archive log. Why this is so...?
I have fired following command.
==================
set pages 300
set lines 120
ALTER SESSION SET nls_date_format='DD-MON-YYYY HH24:MI:SS';
SELECT sequence#, first_time, next_time
FROM v$archived_log
ORDER BY sequence#;
==================
output is as follows.
==================
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1436 24-FEB-2012 00:04:09 24-FEB-2012 08:24:21
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1437 24-FEB-2012 08:24:21 24-FEB-2012 15:45:01
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1438 24-FEB-2012 15:45:01 24-FEB-2012 15:45:04
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1439 24-FEB-2012 15:45:04 24-FEB-2012 15:45:57
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1440 24-FEB-2012 15:45:57 24-FEB-2012 17:26:41
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1441 24-FEB-2012 17:26:41 24-FEB-2012 18:40:07
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1442 24-FEB-2012 18:40:07 24-FEB-2012 19:36:17
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
1443 24-FEB-2012 19:36:17 24-FEB-2012 19:36:18
==================
Regards
DBA.

I have noticied that there are two entries for each archive log. Why this is so...?Mseberg already mentioned.. little in detail as below
Check for the name column in v$archived_log,
One location refers to Local destination LOG_ARCHIVE_DEST_1
Other location refers to your standby/DR location, But it will shows you only service name instead of full archive name.
select dest_id,name from v$archived_log where name is not null and completion_time like '%24%FEB%'
   DEST_ID NAME
         1 +ORAARCHIVE/prod1/archivelogs/arch_0001_0671689302_0000240097.arc
         2 (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=sldb1srv)(POR
           T=9101)))(CONNECT_DATA=(SERVICE_NAME=prod_sldb1srv_XPT)(INSTANCE_N
           AME=prod1)(SERVER=dedicated)))Edited by: CKPT on Feb 24, 2012 8:26 PM

Listener - Two Services for Each Instance

Oracle 11r2g was installed on a Linux SO. Everything is working, but when I check the Listener Services I got this status:
lsnrctl services
Service "S060" has 1 instance(s).
Instance "S060", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:86 refused:0
LOCAL SERVER
Service "S060.domain" has 1 instance(s).
Instance "S060", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1289 refused:0 state:ready
LOCAL SERVER
There are Two Services for Each Instance. Is it normal or do I have to check anything else?
Thanks in advance.

910492 wrote:
Oracle 11r2g was installed on a Linux SO. Everything is working, but when I check the Listener Services I got this status:
lsnrctl services
Service "S060" has 1 instance(s).
Instance "S060", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:86 refused:0
LOCAL SERVER
Service "S060.domain" has 1 instance(s).
Instance "S060", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1289 refused:0 state:ready
LOCAL SERVER
There are Two Services for Each Instance. Is it normal or do I have to check anything else?
Thanks in advance.Pretty normal. The "unknown" is the static registration coming from the SID_LIST entry in the listener.ora file. The "ready" is the dynamic registration from the db instance itself.

This is regarding printing vertical lines for each and every field

Hi to all.....
1....Hi
here is a requirement
i want to print vertical lines and horizontal lines for each and every field in the output of a report.Here i want to see the output just like table i.e i want to draw line after each field.
                         suppose if the output list contains just 10 records, then the vertical line must end for 10 records.how to draw vertical lines for this requirement.
thanks and regards,
k.swaminath

Hi
In report you can use
sy-uline for horizontal line
sy-vline for vertical lines.
Check this sample report
DATA: BEGIN OF USR_TABL OCCURS 0.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
DATA: L_LENGTH TYPE I,
T_ABAPLIST LIKE ABAPLIST OCCURS 0 WITH HEADER LINE, BEGIN OF T_USER OCCURS 0, COUNTER TYPE I, SELECTION TYPE C, MANDT LIKE SY-MANDT, BNAME LIKE SY-UNAME, NAME_FIRST LIKE V_ADRP_CP-NAME_FIRST, NAME_LAST LIKE V_ADRP_CP-NAME_LAST, DEPARTMENT LIKE V_ADRP_CP-DEPARTMENT, TEL_NUMBER LIKE V_ADRP_CP-TEL_NUMBER, END OF T_USER, L_CLIENT LIKE SY-MANDT, L_USERID LIKE UINFO-BNAME, L_OPCODE TYPE X, L_FUNCT_CODE(1) TYPE C, L_TEST(200) TYPE C.
L_OPCODE = 2.
CALL ThUsrInfo ID OPCODE FIELD L_OPCODE
ID TAB FIELD USR_TABL-*SYS*.
CLEAR T_USER. REFRESH T_USER.
LOOP AT USR_TABL.
T_USER-MANDT = USR_TABL-MANDT. T_USER-BNAME = USR_TABL-BNAME. APPEND T_USER.
ENDLOOP.
SORT T_USER.
DELETE ADJACENT DUPLICATES FROM T_USER.
LOOP AT T_USER.
T_USER-COUNTER = SY-TABIX. SELECT V~NAME_FIRST V~NAME_LAST V~DEPARTMENT V~TEL_NUMBER INTO (T_USER-NAME_FIRST, T_USER-NAME_LAST, T_USER-DEPARTMENT, T_USER-TEL_NUMBER) FROM USR21 AS U JOIN V_ADRP_CP AS V ON U~PERSNUMBER = V~PERSNUMBER AND U~ADDRNUMBER = V~ADDRNUMBER WHERE U~BNAME = T_USER-BNAME. ENDSELECT. MODIFY T_USER.
ENDLOOP.
SORT T_USER BY NAME_LAST NAME_FIRST.
PERFORM DISPLAY_LIST.
TOP-OF-PAGE.
PERFORM DISPLAY_MENU.
    * End of top-of-page
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM DISPLAY_MENU.
    * End of top-of-page during line-selection
AT LINE-SELECTION.
IF SY-CUROW = 2. IF SY-CUCOL < 19. T_USER-SELECTION = X. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = . PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 36. CLEAR T_USER-SELECTION. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = X. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 50. PERFORM TRANSFER_SELECTION. PERFORM POPUP_MSG. ELSEIF SY-CUCOL < 67. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_LAST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 81. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_FIRST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 93. PERFORM TRANSFER_SELECTION. SORT T_USER BY MANDT. PERFORM DISPLAY_LIST. ENDIF. ENDIF.
    * End of line-selection
*& Form DISPLAY_LIST
FORM DISPLAY_LIST.
SY-LSIND = 0.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
LOOP AT T_USER.
WRITE: / SY-VLINE, T_USER-SELECTION AS CHECKBOX, SY-VLINE, T_USER-MANDT, SY-VLINE, T_USER-BNAME, SY-VLINE, T_USER-NAME_FIRST(15), SY-VLINE, T_USER-NAME_LAST(15), SY-VLINE, T_USER-DEPARTMENT, SY-VLINE, T_USER-TEL_NUMBER(20), SY-VLINE. HIDE: T_USER-COUNTER, T_USER-SELECTION.
ENDLOOP.
FORMAT COLOR OFF.
WRITE: /(108) SY-ULINE.
ENDFORM. DISPLAY_LIST
*& Form DISPLAY_MENU
FORM DISPLAY_MENU.
FORMAT COLOR COL_HEADING HOTSPOT. WRITE: (91) SY-ULINE, / SY-VLINE NO-GAP, (4) ICON_SELECT_ALL NO-GAP, Select All, SY-VLINE NO-GAP, (4) ICON_DESELECT_ALL NO-GAP, Deselect All, SY-VLINE NO-GAP, (4) ICON_SHORT_MESSAGE NO-GAP, Send Popup, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Last Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, First Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Client NO-GAP, SY-VLINE, /(91) SY-ULINE, /(108) SY-ULINE. FORMAT HOTSPOT OFF. WRITE: / SY-VLINE, , SY-VLINE, Cli, SY-VLINE, User , SY-VLINE, First Name , SY-VLINE, Last Name , SY-VLINE, Department , SY-VLINE, Telephone , SY-VLINE, /(108) SY-ULINE. FORMAT COLOR OFF.
ENDFORM. DISPLAY_MENU
*& Form TRANSFER_SELECTION
FORM TRANSFER_SELECTION.
DO. READ LINE SY-INDEX FIELD VALUE T_USER-SELECTION. IF SY-SUBRC <> 0. EXIT. ENDIF. MODIFY T_USER TRANSPORTING SELECTION WHERE COUNTER = T_USER-COUNTER. ENDDO. CLEAR T_USER.
ENDFORM. TRANSFER_SELECTION
*& Form POPUP_MSG
FORM POPUP_MSG.
DATA: L_MSG LIKE SM04DIC-POPUPMSG VALUE Experimental Message, L_LEN TYPE I, L_RET TYPE C. LOOP AT T_USER WHERE SELECTION = X. PERFORM GET_MESSAGE CHANGING L_MSG L_RET. EXIT. ENDLOOP. IF L_RET = A. User cancelled the message EXIT. ENDIF.
    * Get the message text
L_LEN = STRLEN. LOOP AT T_USER WHERE SELECTION = X. CALL FUNCTION TH_POPUP EXPORTING CLIENT = T_USER-MANDT USER = T_USER-BNAME MESSAGE = L_MSG MESSAGE_LEN = L_LENGTH
    * CUT_BLANKS =
EXCEPTIONS USER_NOT_FOUND = 1 OTHERS = 2. IF SY-SUBRC <> 0. WRITE: User , T_USER-BNAME, not found.. ENDIF. ENDLOOP. IF SY-SUBRC <> 0.
    * Big error! No user has been selected.
MESSAGE ID AT TYPE E NUMBER 315 WITH No user selected!. EXIT. ENDIF.
ENDFORM. POPUP_MSG
*& Form GET_MESSAGE
FORM GET_MESSAGE CHANGING P_L_MSG LIKE SM04DIC-POPUPMSG
P_RETURNCODE TYPE C.
DATA: BEGIN OF FIELDS OCCURS 1. INCLUDE STRUCTURE SVAL.
DATA: END OF FIELDS, RETURNCODE TYPE C.
FIELDS-TABNAME = SM04DIC.
FIELDS-FIELDNAME = POPUPMSG.
FIELDS-FIELDTEXT = Message :. CONCATENATE Msg from SY-UNAME . INTO FIELDS-VALUE SEPARATED BY . APPEND FIELDS.
CALL FUNCTION POPUP_GET_VALUES
EXPORTING POPUP_TITLE = Supply the popup message
IMPORTING RETURNCODE = P_RETURNCODE
TABLES FIELDS = FIELDS.
IF P_RETURNCODE = A.
EXIT.
ELSE.
READ TABLE FIELDS INDEX 1.
P_L_MSG = FIELDS-VALUE.
ENDIF.
ENDFORM. GET_MESSAGE
*End of Program
Regards
Pavan

How do I convert a power point document to a pdf where it will show the notes for each slide?

How do I convert a power point document to a pdf where it will show the notes for each slide?

To get the 'handout view' with a slide and the speaker notes on the same page, you have to save the PDF file directly from PowerPoint (the later versions of Microsoft Office can make PDF files without the help of Acrobat).

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

Right click the heading at the top of the message list and select From from the list of options.

Counting the number of lines for each procedure in a package

Hi,
I would like to write a query on USER_SOURCE that can display the number of code lines for each procedure/function in a package.
Is it possible to write such a query? Maybe by using analytical functions?
for example in the following example i would like to count the lines between "PROCEDURE proc1 IS" and "END proc1;" and between "PROCEDURE proc2 IS" and "END proc2;"
SQL> select text from user_source where name='PKG_TEST' and type='PACKAGE BODY';
TEXT
PACKAGE BODY PKG_TEST IS
PROCEDURE proc1 IS
BEGIN
    update t1 set EDITION_NAME = 'AAAAAAA';
    commit;
END proc1;
PROCEDURE proc2 IS
BEGIN
   update t1 set EDITION_NAME = 'AAAAAAA';
    commit;
END proc2;
END PKG_TEST;thanks for helping

onedbguru wrote:
Hopefully some idiot manager isn't trying to use this sort of thing to base their decisions on developer productivity. If so, they ARE idiots. Number of code lines NEVER, EVER, EVER!!! translates into an efficient application. If I were paid by the line, my code would look like:
select
1
from
dual
Based on the idiocy of this method of determining "performance" I would get paid $5.00 at $1.00/line. And trust me, I saw this back in the 80's and 90's and saw similar idiotic code and had to clean up the mess. Most of it wasn't efficient code to start with let alone the number of lines generated.Or the other extreme, when the PHB firmly believed that execution efficiency was gained by reducing the number of lines of code. So instead of nicely formatted, easy to read code:
      *GET NEXT ORDER NUMBER
            EXEC SQL
                 SELECT (MAX(ORDER_NUM) + 1)
                 INTO   :NEXT-NUM:IND-NULL
                 FROM   PART_ORDER
            END-EXEC.
            IF IND-NULL < 0
              MOVE 1 TO NEXT-NUM.
            EXEC SQL
                 INSERT
                 INTO    PART_ORDER
                        (ORDER_NUM,
                         ORIGIN_LOC,
                         ORDER_TYPE,
                         ORDER_STAT,
                         CREAT_TIME)
                 VALUES (:NEXT-NUM,
                         :LOC, 'R', 'O',
                         CURRENT TIMESTAMP)
               END-EXEC.
            MOVE NEXT-NUM TO MASK0.
            PERFORM HEADER-PROC THRU HEADER-EXIT.
        CREATE-ORDER-EXIT. EXIT.                                                     You got this:
       *GET NEXT ORDER NUMBER
        EXEC SQL SELECT (MAX(ORDER_NUM) + 1) INTO :NEXT-NUM:IND-NULL FROM
        PART_ORDER END-EXEC. IF IND-NULL < 0 MOVE 1 TO NEXT-NUM. EXEC SQL INSERT
        INTO PART_ORDER (ORDER_NUM, ORIGIN_LOC, ORDER_TYPE, ORDER_STAT,
        CREAT_TIME) VALUES (:NEXT-NUM, :LOC, 'R', 'O', CURRENT TIMESTAMP)
        END-EXEC. MOVE NEXT-NUM TO MASK0. PERFORM HEADER-PROC THRU HEADER-EXIT.
        CREATE-ORDER-EXIT. EXIT.                 Oh, wait! See the same thing all the time in this forum ... not because someone thinks fewer lines = faster code, but simply because people are sloppy.
INSERT INTO PART_ORDER(ORDER_NUM,ORIGIN_LOC,ORDER_TYPE,ORDER_STAT,CREAT_TIME) VALUES (:NEXT-NUM,:LOC, 'R', 'O',CURRENT TIMESTAMP) ;

RAW JPEG PROBLEM I'm new to Aperture and neglected to mark RAW JPEG pairs when I imported (from iPhoto). Now I have two images for each photo. Help!! How can I change this?

I’m new to Aperture and neglected to mark RAW+JPEG pairs when I imported (from iPhoto). Now I have two images for each photo. Help!! How can I change this?

How did you import from iPhoto? If you saw the Import panel with raw -jpeg pairs, then you probably did not import your iPhoto library as library, but as files, and then you will see plenty of duplicates - previews, thumbnails, originls, edited versions. If that should be the case, it would be better to delete the import from iPhoto and to import your iPhoto library again, but this time using "File > Import > Library".
Only that would require compatible versions of iPhoto and Aperture. What are your Aperture and iPhoto version numbers?

Suddenly my iCal has begun showing two lines for each birthday in my address book

Similar Messages

Maybe you are looking for