Suddenly my iPhone 4S's sound isn't working!

I have an iPhone 4S is running on 7.04 and suddenly yesterday, no sound is coming out. All the settings are saying sound is enabled, the mute button is fine, and the volume bar appears as if everything is working, but no sound is coming out the phone whatsoever! However sound does come out of headphones!!! Someone please help!!!!?

Hi iphoneeeeeeeee,
Thanks for using Apple Support Communities.  This article has some steps, some of which it sounds like you tried, that may help with sound issues:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
Cheers,
- Ari

Similar Messages

  • My volume isn't working on music an other stuff on my iphone, like my lock sound isn't working neither is my typing clicks, my volume control has gone from my music too, help me, what is this???

    My volume isn't working on music an other stuff on my iphone, like my lock sound isn't working neither is my typing clicks, my volume control has gone from my music too, help me, what is this???

    Oh, I forgot to add that I've also tried repairing permissions.

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • My iphone 5c the sound doesn't work only with earphone.

    my iphone 5c the sound doesn't work it works only with earphone.

    Hi there lavodette,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    -Griff W. 

  • After I upgrade maverick my display will suddenly shut off but my sounds is still working. Need help

    After I upgrade maverick my display will suddenly shut off but my sounds is still working. Need help on this? Thank you

    Hello rodamitjr,
    It sounds like your iMac display will turn off unexpectedly, but you can tell the computer is still on because you hear audio.
    I found an article with steps to troubleshoot issues with displays.  This article is for internal and external displays, so you can skip any steps referring to an external display.  I recommend reviewing the full article, but this step specifically stands out to me for the issue you described:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the full article here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • After downloading yosemite the sound isn't working for safari

    I have a 13' Macbook Pro Retina and after downloading yosemite the sound isn't working for safari or google chrome, however, sound works for all other applications such as iTunes and notifications as far as I know. How do I get sound back for safari or chrome?

    Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • HT4085 My sound isn't working

    I have a iPad Ist generation and my sound isn 't working.

    Try the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup via iTunes
    - Restore to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My computers sound isn't working

    I have a HP ENVY TouchSmart 15 Notebook PC, all of a sudden my sound is not working on my computer after it did its daily updates.  I get a error message that says CAN'T PLAY: make sure headphones or speakers ae connected and that your computers sound card is enabled. With the code 0xc00d3fa (0xc00d3fa). 
    Any help would appreciated in fixing this problem.

    HiLatty86,
    Welcome to the HP forum!
    Thank you for your query, I will try my best to help.
    I grasp that after installing an update you have no sound. Here is a link to No Sound from the Speakers (Windows 7) that may help. If this is not resolved and you would like additional assistance, would you provide the exact model of Envy Touchsmart 15 you have, How Do I Find My Model Number or Product Number?,  the operating system you are running  and if it is 32 or  64 bit.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • What do I do if my sound isn't working

    As of this morning my sound is no longer working nor with or without the use of headphones. I have turned all the volume settings up to high and have not seen a result. Please help!
    Thanks 

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    14. Make a "Genius" appointment at an Apple Store.

  • TS4235 My sound isn't working because of 'Safe Boot'. How do I fix it? How do I turn off 'Safe Boot'. I need my sound to work again.

    I loged off my computer and I need to go back on the my sound wasn't working. I need my sound to work again. In the top right coner when I log out in red says, 'Safe Boot'. Could someone please help me?

    Welcome to Apple Support Communities
    Restart and your Mac should start up in normal mode, so you can use speakers again.
    If it doesn't work, reset the PRAM > http://support.apple.com/kb/HT1379
    If nothing works, open Terminal (in /Applications/Utilities) and type:
    sudo nvram -d boot-args
    Finally, restart your computer

  • Sound isn\'t working on hp pavillion

    I have a HP pavillion dv7-6135dx entertainment pc.  Recently I was burning a CD from itunes when the computer crashed.  I restarted it, and since then the sound doesn't work.  I have run the diagnostic tests, whcih show the sound is working but nothing is coming out of the speakers.  I have double and triple checked to make sure the sound is turned on.  I have unistalled and re-installed the hd sound, i have re installed beats audio.  Any suggestions?  I fear that I am just going to have to to do a system restore, or just Office Space this thing.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp5509​4.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Suddenly Sound isn't working

    Hey, when I boot it up the sound works fine, but after that it works sometimes from time to time. im running lion by the way
    anyone having the same problem??
    help would be highly apretiated

    Hi iphoneeeeeeeee,
    Thanks for using Apple Support Communities.  This article has some steps, some of which it sounds like you tried, that may help with sound issues:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    Cheers,
    - Ari

  • When I plug in headphones into my iphone 4 the sound doesn't work.

    My headphones work fine on other devices, they aren't broken. The sound works WITHOUT headphones and on speaker. My phone isn't on silent either. I also don't want to reset my phone because I have apps I can't fully restore and my icloud is also messed up. So if anyone can help me solve my problem without me having to reset my iphone that would be really helpful.

    Hello Pinktunafish,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting in the article below for this issue you're experiencing with your headphones and iPhone:
    No sound through stereo headset
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

  • Help!!! Sound isn't working!

    When I plug my earbuds into my Ipod touch there is no sound but when I remove the headphones there is sound. I know this must be a problem with my ipod because I have tried other earbuds and it still won't work. How can I fix this without having to buy a new ipod.? I would also like to say that my sound effects thing keeps popping up randomly and turning my volume all the way up. I need help please.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • HT4623 I don't know what's happened but the media sound isn't working unless I have headphones in. Games, voice notes, music, radio, touch tones and lock tones aren't working and it's also starting to not charge properly as we'll now. What do I do ?

    I've tried resetting all settings and tried to alter the sound in settings. It plays ringtones and alarm works but no message alert tone or touch tone lock tone radio and when I try to turn the volume up by the buttons I just get the bell with no volume bar. I don't know what's going on it's annoying I don't wanna have to wear headphones all the time. How do I fix it ???

    Clean iPhone charging port very well with toothbrush and isopropyl alcohol. If still problem the replacement part is charging port assembly with flex cable, lower mic and home button flex connector, all a less than $10 single part. Apple handles this with replacement iPhone 4 for $149, make Genius reservation.

Maybe you are looking for

  • How do I clean a virus off my Macbook Pro?

    My MacBook Pro constantly has pop-ups and directs me to a new tab everytime i try to click on something on Safari. How can i prevent this from happening? I think it is a virus but I'm not completely sure. Please help! Thank you!

  • Photoshop Elements 3 jpg not viewable by PC users

    Sigh. I don't get it. I did this great stuff with Photoshop Elements 3, saved it as a jpg file, and tried to email the picture to a friend. It looked fine in the email on my end. When I open Mail and look at what I sent, the picture is there. My frie

  • Broker not shutting down completely

    Hello, I'm running 3.5 SP1 and have had the broker apparently lock up on shutdown. [09/Jun/2004:10:04:44 MDT] [B1047]: Shutting down broker... [09/Jun/2004:10:04:44 MDT] [B1007]: Stopping Service ssladmin with protocol SSL/TLS [ 40004,5] [09/Jun/2004

  • Using Aperture 3.03 with a Drobo

    I recently got Aperture 3 and imported my iPhoto into it (14,000 images 70 GIG). I chose to move the images into the Aperture library which by default built itself on the internal drive of my Macbook Pro based 'server'. (OS 10.6.4, 4 gig ram) Once it

  • Any way to adjust Calendar alarm sound?

    Is there any way to adjust the Calendar alarm sound from it's default "Time Passing" setting? Would prefer one of the other ones, but can't see where to change it...