Suddenly my magic mouse won't track properly, can anyone help?
Suddenly my magic mouse won't track around the screen properly, can anyone help? It was working fine then it started sticking. It scrolls from top to bottom fine just the on screen movement is effected. The battery is showing 100%, I've changed the fast/slow slider all the way to the right which has helped a little and unpaired it from bluetooth then re-paired it, did an SMC shut-down, cleaned ball, battery points but it still does not feel totally right? Am I missing something?
hi, i had the same problem.
i just put my mac into sleepmode
apple logo left corner --> first option above restart
then i connected my magic mouse ( holding the button)
and then it worked
i hope it is working for you too
Similar Messages
-
I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- Try when connected to another network
- Update via iTunes on a computer. -
I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?
When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH -
I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?
Visit HP's support site to see about downloading an updated driver. Or you can check at support.apple.com/downloads/ for new HP printer drivers package.
-
I have an older iMac G5. I updated the computer and itunes updated also. Now it won't come up It wants a updated quicktime. The computer isn
't letting me do that. I need an older version of itunes. can anyone help?iTunes 10 works with Leopard on a PPC Mac if you have Quicktime 7.7 available here:
http://support.apple.com/kb/DL761 -
Can anyone help me please. I have just bought an Iphone 3g. slightly gutted because I was told it was a 3gs, but it's not. Tried to update it as it's currently running on ios 2 but it keeps coming up with error code -1.
I have tried it on varous computers but it still won't update. I have been told it is possible to do it but i haven't got a clue.
Can anyone help please?Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service. -
My iMessage won't send. Can anyone help?
I've tried turning it on and off bit it still won't work! It will be sending and then when it has a little more to send it won't send! This is not the first time I've had this happen. It also happens on my iPod touch. Can anyone help? Thanks :)
Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
My ipad screen has gone blank, I was using it and suddenly blank screen. I have tried connecting to power point for charging but nothing. I hope that someone can advise me I would be most grateful
Connect it to the wall charger and wait about an hour.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I downloaded Netflix from the App Store and it won't show up on my iPad and when I go into the store it says downloaded and open but it won't open. I tried deleting it and reinstalling it but I can't figure out how to uninstall it either. Please help
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- Try when connected to another network
- Update via iTunes on a computer. -
MacBook Pro 2008 won't start up - can anyone help?
I had left my Mac on last night and came down this morning to find it wouldn't respond. I could hear it whirr a bit but nothing on the screen. I pressed the shut-down button, thinking that it would shut down and then start up again. I could see the light at the front go off and it shut-down. When I pressed the button to start-up again there was no dong noise and it sounded as though the DVD drive was trying to read the DVD that is in there. The fan started up after a while and then it went 'dead'. Still nothing on the screen.
The fan has been making a lot of noise when I am doing something that seems to be demanding and I know the battery probably needs replacing. It has been cutting out after a very short time of usage without power without even warning me that it is running low.
I would be very grateful if anyone has any suggestions.
Thanks,
SusannahThere's no telling what's wrong - it's most certainly a hardware problem and can only be properly diagnosed by a qualified Apple technician. If I were you, I would take the machine to your local Apple Store or AASP and have them run diagnostic tests on the machine and give you an estimate on what it would take to fix it.
Sorry, but it's difficult to diagnose these types of problems over the Internet...
Clinton -
the program was working fine then suddenly wouldn't connect to anything. have unistalled everything including passwords, add-ons etc and reinstalled but still no joy.
Hi kjohns2001,
Welcome to the Support Communities!
If you do not have an iPhone, iPad or iPod touch, then you don't need iCloud.
It is a service that keeps these devices and your computer synchronized.
iCloud Control Panel 3.0 for Windows
http://support.apple.com/kb/DL1455
iCloud keeps mail, contacts, and calendars up to date between your iPhone, iPad, iPod touch, Mac, and Windows PC, and lets you share calendars and task lists.
So, you can uninstall it from the Control Panel in Windows.
Cheers,
- Judy -
Can any one help? I have tried several times to import a particular cd onto i-tunes, but each time it will only load the first 9 seconds of each track.
If it was a recent purchase you could take it back to the store and return it as "not fit for purpose", then buy a digital version. If it is too late for that I suppose you could try contacting the record company but I doubt they care at this point since they have the money. Can't really go into any possible workarounds without breaching the TOU.
tt2 -
my ipod 4 shows im connected to wifi but none of my internet apps will load, please help?? ive tried resetting everything and nothings working
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
When I install itunes, i keep getting message that Quicktime failed to initialize, reinstall itunes. I did this at least 15 times and it will not work. Can anyone help me?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
-
I installed InDesign trial and Adobe CC -
ID jammed at 42% so assuming there was a problem
Uninstalled CC and attempted to uninstall ID, which it said completed with 'errors'
When I retried installing ID after reinstalling CC it still jammed at 42%, assuming that I haven't removed all the software off
Adobe InDesign is still marked in my programs, and when I try to uninstall it again this message appears:
'Uninstall Failed. Your uninstallation encountered errors'
I've run the Cleaner Tool & the error message in the .log file is this:
DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
Sorry for the long explanation, but if anyone could help me I'd be so greatful!
ThanksDo you have administrator privileges on the account you are logged in with?
Maybe you are looking for
-
I lost all of my tunes somewhere between updates...
!#%!^^!!($@*! Crap! This bites... Here's the scenario: - I have a G5 and a Shuffle (single user on 10.4.2, nothing funky at all - very vanilla setup and well maintained). - Updated to iTunes 5.01 earlier this week didn't fire up iTunes until tonight
-
This is the first time I have a need at work to use a REF CURSOR type of the weak variety. After reading documentation in SF's 'bible' Oracle PL/SQL Programming, I did everything right. Here's the code snippet: -- TYPES TYPE content_ID_curtype IS REF
-
We normally connect our iPhones (both 4 and 3G) to a screen using the composite video cables. Recently, the static image on the phone has "shifted" upwards such that the top is no longer visible. Which means the scrub bar has disappeared as well. Any
-
I purchased and installed Aperture from the Mac App Store to replace iPhoto 9.1.1 and I can't get Aperture to start. I have tried: -shift-starting Aperture to prevent previews -option-command-starting Aperture to do all three library repair options -
-
PSE 11 Organizer user interface???
About 6 months ago I upgrades to PSE 10. Sortly after that I submitted a product update "request" asking for PSE to provide the ability to set preferences for how the user interface appears, something similar to what is done with Photoshop CS6 and o